Excellence, it’s Our Promise
CERTIFICAT D’ETALONNAGE,
CALIBRATION CERTIFICATE
N° E0505-1/20
Délivréa: CERI
Issued to: — ZI La Charguia- Rue 8600 N°82-Tunis, Tunisie
Equipement étalonné
Calibrated instrament
Désignation : WELDING MACHINE
Designation
Construeteur: — LINCOLIN type
Manufacturer : ‘ype:
Invertec 2708X
N° de série: 1191001305
Serial Number :
Inexistant
Date d’émission : 11/02/2020
Date of issue :
Ce certificat comprend (03) pages
‘This certificate include (03) pages
PRESIDENT DIRECTEUR GENERAL,
CHIEF EXECUTIVE OFFICER
SMADHI MOHAMED
La reproduction do ce coriict nest autre que sous a forme de facsimile photographie intégral
This cecifione may not be reproduced the tha in fil by potgraphie proces.
PROTIMESS sa, Lot 34 Zone Industrielle Zriba 4, 1182 - Zaghouan— Tunisie
[MF :1273205W/A/M/000 , R.C : BO6214252012, Tél: +216 72 668 421, Fax: +216 72 668 431
site: www.protimess.com, Email : protimess@iprotimess.comCALIBRATION CERTIFICATE N° EO505-1 /20
Caractéristiques de l'instrument
Device description
Etendue: 200A
Range:
Resolution 14
Resolution:
Asfichage: Numérique
Display
Remarques
Notes
NA
Condition d’étalonnage
‘Gallatin condition
‘Température 1882°C Date d’étalonnage : 11/02/2020
‘Temperature Date of calibration
Humidité S085 %RH Réalisé par: B.Wajih
Humidity ‘Operator
Liew Site client
Place of calibration
Me ératoire
L’étalonnage a été effectué par comparaison directe des indications de |’ instrument soumis 4 T’étalonnage avec un
étalon réfiérencé ci-dessous, les deux placées dans le méme milieu de comparaison. L"étalonnage a été effectué en
trois points répartis sur toute I'étendue de mesure.
‘The calibration was performed by direct comparison of instrument indications under test with a standard referenced below,
both placed in the same comparison environment. Calibration was performed at three temperature points.
Référentiels util
Used references
DCT-PR-EV-E 10 Procedure of electrical calibration
LAB GTA 10 Technical guide for accreditation
Etalons utilisées
‘Reference equipments used
Déssignation | | Maraue Modile Certifieat
Designation Brand model | Cetifiate N°
Ampermetrie clamp FLUKE 376 | araz0200Ws
Page 2/3
PROTIMESS sa, Lot 34 Zone Industrielle Zriba 4, 1152- Zaghouan — Tunisie
[MF :1273205J/A/M/000 , R.C : BO6214252012, Tél: +216 72 668 421, Fax: +216 72 668-431,
site: www.protimess.com, Era : protimess@protimess.comCALIBRATION CERTIFICATE N° EO505-1/20
Tracabilité
To
L’étalonnage a été réalisé avec des étalons raccordés a la chaine (internationale
‘The calibration has been executed by instruments that are traceable to (inter)national standards.
Incertitude
Les incertitudes élargies mentionnées sont celles correspondant deux incertitudes-types. Les incertitudes sont calculées en
tenant compte des différentes composantes dincertitudes, étalons de référence, moyen d’étalonnage, conditions
d'environnement, contribution de I’instrument étalonné, répétabilité
‘The reported expanded uncertainties is determined by a coverage factor K~2 providing a level of confidence of approximately
95%, The uncertainties are calculated taking into account the different components of uncertainties, reference standards,
calibration means, environmental conditions, contribution of the calibrated instrument, repeatability.
Résultats de 'étalonnage
Calibration Results
‘Valeur indiqué par Valeur mesure Erreur | Incertitude élargie
Vinstument | part'étalon Expanded
ancertainty (K-2)
w ) w | w
4 752 “12
bs 126,1 al 4s
16s 166, “5
Fin de Certificat
8 Endof Certificate c=
Page 3/3
PROTIMESS sa, Lot 34 Zone Industrielle Zriba 4, 1152 - Zaghouan — Tunisie
[MF :127320SJ/A/M/000 , R.C : B06214252012, Tél: +216 72 668 421, Fax: +216 72 668.431
+ www protimess.com, Email: protimess‘@protimess.com