Académique Documents
Professionnel Documents
Culture Documents
Azimuth wind brace. Galvanized steel pipe and brackets include all A
Suitable Tower or Support
hardware for attachment to antenna mount or reflector mounting Structure Member
(not supplied) E, F
ring. Also includes item G for tower end attachment. Strut pipe is
4.5 in (115 mm)
10.5 ft (3.2 m) in length. Diameter Mounting Pipe
(not supplied)
H
D) Azimuth Adjustment Kit, Type Number 520569 G
Visit www.commscope.com/andrew or contact your local Andrew Solutions representative for more information.
© 2010 CommScope, Inc. All rights reserved. Andrew Solutions is a trademark of CommScope. All trademarks identified by ® or ™ are registered trademarks or
trademarks, respectively, of CommScope. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating
to Andrew products or services.
TP-104088-EN (6/10) 1 of 3
Technical Publication
.
POLE 65-115
Visit www.commscope.com/andrew or contact your local Andrew Solutions representative for more information.
© 2010 CommScope, Inc. All rights reserved. Andrew Solutions is a trademark of CommScope. All trademarks identified by ® or ™ are registered trademarks or
trademarks, respectively, of CommScope. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating
to Andrew products or services.
TP-104088-EN (6/10) 2 of 3
Technical Publication
Optional Struts for 4 and 6 ft Antennas (prior to 2009)
• 1.2 m ValuLine™ antennas (VHP4 are prior to 2009) use VSTRUT-P3KIT as an optional fixed side
strut. This will fit all earlier ValuLine 1.2 m antennas.
• 1.2 m TMW antennas (2000–2009) use VSTRUT-P3KIT as an optional fixed side strut.
• 1.2 m TMW antennas (prior to 2000), 1.8 m TMW and ValuLine antennas (prior to 2009) using
T6MSB/T6MSC style mount.
DC--
Visit www.commscope.com/andrew or contact your local Andrew Solutions representative for more information.
© 2010 CommScope, Inc. All rights reserved. Andrew Solutions is a trademark of CommScope. All trademarks identified by ® or ™ are registered trademarks or
trademarks, respectively, of CommScope. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating
to Andrew products or services.
TP-104088-EN (6/10) 3 of 3