Vous êtes sur la page 1sur 3

Product Description:

Type: Hot rolled wire rod


Steel grades: SAE 1006 according to ASTM A510/A510M
SAE 1008 according to ASTM A510/A510M
SAE 1010 according to ASTM A510/A510M
Electrode quality (USD 7) according to DIN 17145
RSt 37-2 according to DIN 17100
From – Diameter: Coils , diameter from 5.5mm to 20 mm
Coil weight: Approx 1,250 kg- 1,450 kg / coil
Diameter, Weight Tolerances: According to DIN 59110.ASTM A510,EN 10204

CHEMICAL COMPOSTION OF WIRE ROD STEEL GRADES


Steel C% Mn% Si% S% P% Cr% Ni% Cu% Typical Uses
Grade (max) (max) (max) (max) (max) (max) (max)
SAE 1006 0.08 0.30-0.40 0.08 0.025 0.020 0.10 0.10 0.15 Black and galvanized wires, small nails

SAE 1008 0.09 0.30-0.50 0.10 0.030 0.020 0.15 0.15 0.25 Black and galvanized wires, nails, galvanized
fencing mesh
SAE 1010 0.10 0.40-0.60 0.15 0.040 0.025 0.20 0.20 0.35 Concrete reinforcing mesh, standard wire
mesh, nails, galvanized fencing mesh
Electrode 0.09 0.40-0.60 0.05 0.025 0.020 0.10 0.10 0.15 Coated welding electrodes (according to DIN
quality 17145 / USD7)
R St 37-2 0.12 0.40-0.65 0.20 0.040 0.025 0.20 0.20 0.40 Concrete reinforcing mesh

DIAMETERS, WEIGHT AND TOLERANCES OF WIRE ROD

PERMISSIABLE OUT
DIAMETER PERMISSIABLE NOMINAL CROSS NOMINAL WEIGHT
OF ROUNDNESS
(mm) DEVIATION (mm) SECTION (cm2) (kg/m)
(mm)
5.5 -0.3/+0.3 0.238 0.187
6.0 -0.3/+0.3 0.283 0.222 0.48
6.5 -0.3/+0.3 0.332 0.260
7.0 -0.4/+0.4 0.385 0.302
8.0 -0.4/+0.4 0.503 0.395
9.0 -0.4/+0.4 0.636 0.499
0.64
10.0 -0.4/+0.4

Prepared by: Engr.Farrukh Rehan, MMS (P.U); R.E (P.E.C)


REFERENCES
STANDARD SPECIFICATIONS:

 A227 A227/A227M-99 Specification for Steel Wire, Cold-Drawn for Mechanical Springs.
 A228 A228/A228M-93 Specification for Steel Wire, Music Spring Quality.
 A229 A229/A229M-99 Specification for Steel Wire, Oil-Tempered for Mechanical Springs.
 A230 A230/A230M-99 Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality.
 A231 A231/A231M-96 Specification for Chromium-Vanadium Alloy Steel Spring Wire.
 A232 A232/A232M-99 Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire.
 A313 A313/A313M-98 Specification for Stainless Steel Spring Wire.
 A368 A368-95a Specification for Stainless Steel Wire Strand.
 A401 A401/A401M-98 Specification for Steel Wire, Chromium-Silicon Alloy.
 A407 A407-93 (1998) Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs.
 A478 A478-97 Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire.
 A492 A492-95 Specification for Stainless Steel Rope Wire.
 A493 A493-95 Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging.
 A510M A510M-00 Specification for General Requirements for Wire Rods and Coarse Round Wire,
Carbon Steel [Metric].
 A510 A510-00 Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon
Steel.
 A555 A555/A555M-97 Specification for General Requirements for Stainless Steel Wire and Wire Rods.
 A580 A580/A580M-98 Specification for Stainless Steel Wire
 A581 A581/A581M-95b Specification for Free-Machining Stainless Steel Wire and Wire Rods.
 A679 A679/A679M-00 Specification for Steel Wire, High Tensile Strength, Cold Drawn.
 A713 A713-93 (1998) Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components.
 A752M A752M-93 (1998) Specification for General Requirements for Wire Rods and Coarse Round
Wire, Alloy Steel [Metric].
 A752 A752-93 (1998) Specification for General Requirements for Wire Rods and Coarse Round Wire,
Alloy Steel.
 A764 A764-95 Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for
Mechanical Springs.
 A805 A805-93 (1998) Specification for Steel, Flat Wire, Carbon, Cold-Rolled.

STANDARD METALLURGY:
1. Low Carbon Mild Steel Wire Rod
Q195 / Q215 / Q235 as per China GB
SAE1006 / SAE1008 / SAE1010 / SAE1012 / SAE1015 / SAE1018 / SAE1020 as per ASTM
SWRM6 / SWRM8 / SWRM10 as per JIS
Sizes (mm): 5.5 / 6.0 / 6.5 / 7.0 / 8.0 / 9.0 / 10.0 / 11.0 / 12.0 / 13.0 / 14.0 / 16.0 / 18.0 /
19.0/20.0 up to 42mm.

2. Low Carbon Mild Alloy Steel Wire Rod


SAE1006B / SAE1008B / SAE1010B / SAE1018B, Boron-added based on Q195 / Q215 / Q235 or
SAE1006 / SAE1008 / SAE1010 / SAE1018 chemical compositions and technical properties

Prepared by: Engr.Farrukh Rehan, MMS (P.U); R.E (P.E.C)


Sizes: 5.5 / 6.0 / 6.5 / 7.0 / 8.0 / 9.0 / 10.0 / 11.0 / 12.0 / 13.0 / 14.0 / 16.0 / 18.0 / 19.0 /
20.0mm, and up to 42mm
3. High Carbon Steel Wire Rod
35# -70# as per China GB
42A / 42B / 47A / 47B / 62A / 62B / 67A / 67B / 72A / 72B / 82A / 82B as per China GB
SAE1035 – SAE1070 as per ASTM
SWRH62A / SWRH62B / SWRH72A / SWRH72B / SWRH82A / SWRH82B as per JIS
Sizes: 5.5 / 6.5 / 7.0 / 8.0 / 9.0 / 10.0 / 11.0 / 12.0 / 12.5 / 13.0 / 14.0mm

4. Cold-heading Steel Wire Rod


ML15 – ML35 as per China GB
SWRCH15K – SWRCH35K as per JIS
SWRCH8A / SWRCH15A / SWRCH18A / SWRCH22A as per JIS
Sizes: 5.5 / 8.0 / 9.0 / 10.0 / 11.0 / 12.0 / 13.0 / 14.0 / 16 / 18 / 20mm

5. Welding Steel Wire Rod


H08A-1 / H08A-2 / H08A-3 / H08A-4 as per China GB
ER50S-6 / ER70S-6 as per JIS

Prepared by: Engr.Farrukh Rehan, MMS (P.U); R.E (P.E.C)

Vous aimerez peut-être aussi