Académique Documents
Professionnel Documents
Culture Documents
Jonkerweg 17-19
1217 PM Hilversum
The Netherlands
YOUR DEALER
New Collection
COMPACT SERIES
Creative minds
Established by Jan Slooter in 1983, SOUND PROJECTS
has gained a reputation for innovative design and
pragmatic solutions in self-powered sound
reinforcement.
Total integration of all relevant electronic components
within the system enabled SOUND PROJECTS to GLUON™
achieve sophisticated system-inclusive solutions. unobtrusive infill- or spotmonitor
Components
Gluon™ is configured as a single amped, 2-way system. The
long excursion 5-inch woofer is selected for a smooth
response and high output. The hornloaded 1”diaphragm HF
driver endows the Gluon™ with a distinctive smooth high end
response.
One
LINE ARRAY TECH TALK
Wave-shape-transformer™
The unique and patented High Frequency
Wave-shape-transformer™ is the vital backbone of all
SOUND PROJECTS full-range line array models. This unique,
proprietary acoustic wave-guide technology transforms the
spherical uni-phase wavefront generated by the HF
compression driver to a near perfect cylindrical wavefront
emerging from the front of the array. Smooth edged
horizontal and, even more important, tight vertical dispersion
generate the necessary virtual “slice of audio” that easily
stacks on top of each other.
The low compression high frequency drivers have small
diaphragms in comparison to their pass-band, similar to low
and mid frequency drivers. This feature, augmented by the
appropriate acoustic loading of the wave-shape-transformer™
is responsible for a spectacular impulse response.
Two
SIGMA SERIES
Linex™
symmetrical vertical line array module
Acoustic properties
Musicality, smooth HF radiation, breath taking impulse behaviour
and immaculate acoustic coupling are decisive Linex™
ingredients. An important feature is the impressive low-end
performance of a Linex™ rig. Subs can remain ground stacked
without loosing musical coherence; all musical information comes
from the fly. Whenever called upon, a Linex™ rig will deliver
sound pressure levels second to none... This is vital for
reproducing all the emotions and dynamics of a live performance.
Components
Two custom designed 6.5-inch MF drivers are mounted behind
narrow, rectangular diffraction slots acting as two “line sources”
flanking the patented HF Wave-shape-transformer™. Minimized
horizontal dimensions and an appropriate time offset guarantee a
smooth transition between the three exits at cross-over frequencies
and therefore a constant horizontal coverage angle. To emulate a
single, symmetrical low frequency source, two 12” woofers are
mounted ”side firing” in the enclosure, which has a 62 Hz bass
reflex tuning. This configuration endows Linex™ with an
impressive low-end response that often makes subwoofers
obsolete.
Not self-powered!
Linex™ will almost exclusively be used as multiple-enclosure rigs.
Consequentially most, if not all, arguments for built-in
amplification are invalid. In fact the "power-packing-density" of
loudspeaker-chassis already generates a lot of heat. Thus adding
even minimal heat-generating power-amplifiers would be
prohibitive. Therefore, unlike all other SOUND PROJECTS
systems, Linex™ has not been made self-powered.
Four Five
DreamLine Series
self-powered line array solution
Is there a reason why a sound system should not look elegant? Wouldn‘t it be great
if there was a system with all the advantages of a line-array combined with the
reliable simplicity of a standard plug-and-play, self-powered loudspeaker?
A SOUND PROJECTS DreamLine™ is precisely that. Not just another box, nor just
another line array system. Instead, all the advantages of a perfect line source are
embedded in each DreamLine™, augmented by our proven DALC controller
circuits and MICRO-AMP's.
All the complexities of alignment, controller presets, amp racks, rigging hardware
and heavy cabinets are omitted. Cabling is greatly reduced: one AC power line
and one audio line. Typical setup time can be around 5 minutes for one system, a
fraction of a comparable ‘conventional‘ line-array system, based on multiple,
single cabinets.
DreamLine™
THE one box line array
Twelve Wave-shape-transformers™ are flanked by two 6,5 inch low mid drivers
and loaded by constant directivity waveguide to create a powerful, fullrange
system. Angle settings of all 12 individual line-source units are optimised for a
stable listening image all over the audience. Amplifier power is supplied by
multiple MICRO-AMP™ modules and “protected” by a DALC speaker
management system with a fixed, system dependent pre-set.
Easy flying, installing and transport of the system without extensive technical
knowledge. Any chances on installation errors have virtually been omitted. A
weight of only 120 kg, enables the DreamLine™ to be flown from most theatre
fly-bars.
Tailor-made
For fixed installation each DreamLine™ can be configured individually. Based on
the venues parameters such as seat plan, auditorium shape and required loudness,
the 12 wave-shape-transformers™, can be adjusted up to increments of 1/10th of a
degree to match a specific venue. Even the maximum obtainable SPL can largely
be adapted to customer‘s needs. All of this within one aesthetic housing in a
customer specified colour. The correct rigging point is marked and flying height is
indicated on the box.
The DL15 and DL30 are the split version of the DreamLine™ adding versatility to
the DreamLine concept with pragmatic rigging hardware (one setting only!), ease
of transport and expandability to up to 4 systems in rugged cabinets with truck
pack transport sizes. Combining the DL15 and DL30 results in line array
configurations varying from 15 up to 120 degrees vertical dispersion angle.
Six
TECHNICAL SPECIFICATIONS
(preliminary)
LOW PRODUCTS
45Hz-20kHz
90 H x 60 V
114 dB
5” / 1”
Gluon
3.2kg
600
865
285
Amplifier power
Excels in punch and will add power to the low
Transducers
octaves of most instruments.
Weight
System
The SP210 is an array-able, horn-loaded low/mid
SP18-Sigma
800
865
155
system containing two long excursion 10-inch
drivers. With a single cabinet the SP210 will perform
SP2-10
omni-directional
Gluon
190
865
properly from 55 to 200Hz, depending on the
800 W @ 8W
30-80Hz
desired SPL. Extending the number of cabinets, thus
131 dB
54 kg
SP18
the radiating surface, will enable the horn to be
18”
driven full power down to the lowest octave.
It greatly blends and mixes with an SP18 to make a
compact touring system.
omni-directional
2x600 W @ 4W
345
50Hz-200Hz
SP18
136 dB
SP2-10
2x10”
58 kg
Excels in deep sub and will make any small system
720
865
sound big. The SP18 is a frontloaded sub-low
holding a custom designed 18-inch neodymium
600
865
driver with an exceptional 3 cm excursion
2x600W @ 4W
12x6.5” / 6x1”
capability. Flying the SP18 as a line-array greatly
35Hz-20kHz
90 H x 15 V
expands the aiming and projection possibilities of
134 dB
DL15
70 kg
the lower frequencies.
1050
If you would like to learn more about
SP20-Linex
the bass project, you may wish to download our
550
865
2x600W @ 4W
12x6.5” / 6x1”
white paper from www.soundprojects.com
35Hz-20kHz
90 H x 30 V
415
865
DL30
DL15
132 dB
DL30
70 kg
24x6.5” / 12x1”
4x600W @ 4W
35Hz-20kHz
90 H x 40 V
DreamLine
138 dB
120 kg
840
2x1200W @ 8W (recom.)
2x600W @ 8W (recom.)
70Hz-20kHz
SP20-Linex
90 H x 6 V
144 dB
40 kg
2205
Amplifier power
415
865
Transducers
Weight
System
������ ����
New materials and design refinements are introduced into existing products without previous notice. As a logical consequence, present SOUND PROJECTS
systems may differ in some respect from those presented in this brochure. SOUND PROJECTS, h-max and MICRO-AMP are registered trademarks.
Eight Dreamline, Linex and Gluon are trademarks of SOUND PROJECTS. Copyright 2006 SOUND PROJECTS. All rights reserved.