Académique Documents
Professionnel Documents
Culture Documents
1
Plug in A/C adapters and connect
Power on
to Ruckus router and adapter.
Green
If you have PPPoE service
turn over for instructions WAN connected
green=100 Mbps
amber=10 Mbps
2
Green/Amber
Autoprovision by directly connecting Ruckus router
to Ruckus adapter with an Ethernet cable (supplied)
No associated
devices
Adapter Router
Device(s)
associated
2 right LEDs are blinking 2 right LEDs are off
Associated station
with lowest signal
Autoprovisioning Autoprovisioning strength connected
in process complete perfectly
3
Green
Plug one end of the Ethernet cable into LAN port Blinking Associated station
of DSL modem or broadband gateway and the with lowest signal
strength connected
other into the WAN port of the MediaFlex router OK
Green
Blinking
Associated station
with lowest signal
strength connected
poorly
Green/Red
4
Attach Ruckus adapter to receiving devices
Hardware problem
(eg. set top box, game machine, computer, etc.), turn on TV
to ensure connectivity and (optional) turn on wireless Red
062906
g
FOR THE SERVICE PROVIDER
1
Power on Ruckus router and plug one end of
the Ethernet cable (supplied) into any of the
first four LAN ports and the other into your
computer’s Ethernet port
2
Run Web browser and enter the default IP address
of router (192.168.1.1) in address bar, then enter
the required username and password to login to
Ruckus router
3
From Main Menu, click on
Internet under the Configuration
option. Then select on the PPPoE
radio button and enter the required
username and password for the
PPPoE service and click the Update
Settings button
4
Once configured, follow all
steps (1-4) on other side of
this Quick Start sheet.
062906