Académique Documents
Professionnel Documents
Culture Documents
Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
Pyroelectric Infrared
Sensors
Murata
Manufacturing Co., Ltd.
Cat.No.S21E-6
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
Part Numbering 2
2
1 SMD-Dual Type Pyroelectric Infrared Sensor IRS-A200ST01 Series 3
Fresnel Lens 9
Notice 13
Recycled Paper
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
o Part Numbering
qProduct ID
wType
eCharacteristics
rIndividual Specification Code
2
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
! Features
1. High sensitivity and excellent S/N ratio
2. High stability to temperature changes
3. 240°C peak Reflow soldering is available.
4. High immunity to external noise (Vibration, RFI etc.) ! Dimensions & Circuit Diagrams
5. Higher in cost-performance [ Top view ] [ Bottom view ]
1. Security
2. Lighting appliances
6.7
4.8
2.5
2.0
3. Household or other appliances
4-0.8
Storage Temperature
s
RG
3
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
! Features
1. High sensitivity and excellent S/N ratio ! Dimensions & Circuit Diagrams
2. High stability to temperature changes
3. Slight movement can be detectable.
4. High immunity to external noise (Vibration, RFI etc.)
5. Custom design is available.
6. Higher in cost-performance
! Applications
1. Security
2. Lighting appliances
3. Household or other appliances
(in mm)
IRA-E700ST0
IRA-E710ST0
4
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
! Features
1. High sensitivity and excellent S/N ratio ! Dimensions & Circuit Diagrams
2. High stability to temperature changes
3. Slight movement can be detectable.
4. Non directional sensing with wide F.O.V.
5. High immunity to external noise (Vibration, RFI etc.)
6. Custom design is available.
7. Higher in cost-performance
! Applications
1. Security
2. Lighting appliances
3. Household or other appliances ∗Specified on the bottom of stem
! Rating (25˚C)
Part Number IRA-E900ST1 IRA-E910ST1 General Tolerance : ±0.2
Responsivity (500K, 1Hz, 1Hz) 3.3mVp-p (Typ.) (in mm)
IRA-E900ST1
IRA-E910ST1
5
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
80
60
40
20
0
4000 3500 3000 2500 2000 1800 1600 1400 1200 1000 800
Wave Number (cm–1)
! Frequency Characteristics
5
6
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
7
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
! Reliability Test
IRS-A200ST01 series, IRA-E700 series, IRA-E900 series
Item Test Conditions Criteria
High Temperature 100D for 500 hrs.
After test completion, leave for three hours in
Low Temperature Y40D for 500 hrs.
normal humidity temperature conditions, and
Humidity 60D, 95% RH for 500 hrs.
then measure.
20 times of following cycle.
1. External appearance:
Heat Cycle Y25D, 30 min. ⇨Room temp., 30 min.⇩
No significant damage
⇧Room temp., 30 min. ⇦55D, 30 min.
2. Sensitivity:
Apply vibration of amplitude of 1.5mm with 10 to 55Hz band to each of 3
Vibration Tolerance within 20% deviation from original
perpendicular directions for 60 min.
value
Apply shock of 100G sinewave by standard shock tester to each of 3
Shock 3. Noise:
perpendicular directions.
Maximum tolerance W100mV of original value
Soldering Heat Immerse up to 3.0mm from can case in solder bath of 260T5D for 10T1 s.
Conform to MIL-STD-202F chapter 112D, condition D.
Hermetic Sealing No generation of bubbles
Immerse in fluorocarbon bath (FC-40) of 125T5D for 20 s.
8
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
(in mm)
PPGI0902
(in mm)
9
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
(in mm)
IML-0635
10
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
IML-0637
IML-0638
6.11m 3m
3m
42ϒ
4.91m 0m
42ϒ
3m
On the Floor Vertical
3m 0m 3m
Vertical
Horizontal
45.5ϒ 45.5ϒ
Pyroelectric Element
Horizontal
Assembled with Murata sensor IRA-E700 Series.
11
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
4- -C
R 1.
1- 25
4
R0.3
75
0m 0m
4.4
2.75
)
85
8
0.
(C
6
(O
1.
5.2
4)
5)
02
3m 3m
.
(1
1
R
Horizontal Vertical
5.2
9
7
IML-0658
(8780)
9
(5224)
A
(1475)
R
5.
15
(5.009)
ø9
(62.47ϒ)
(82.43ϒ)
(8758)
(3370)
(2234)
(2694)
A
5
(7.76)
5000 (1723)
7.16
2
SR
6
(5279)
0.6
2.75
ø9
Side View Front View (in mm)
IML-0669
A330ST02+IML-0669 (Distance: 2.5m)
R6.5
ø11
ø12
Thickness 0.4t
Max. 7.5m
3.25 7.254
1.254
SR
5.
0.07
1.55
5
0.57
1.5 0.9
1.13
2 0.5
Max. 6.0m
ø10.2
Max. 6.0m
12
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24
Notice
! Notice
1. Caution (Design) 2. Caution (Mounting)
(1) Please make sure that your product has been evaluated (1) Soldering
and confirmed against your specifications when our (a) Hand soldering should be applied.
product is mounted to your product.
(2) Be sure to provide an appropriate fail-safe function on (b) Soldering should be done quickly as following.
your product to prevent a second damage that may be Temperature of soldering iron : 350˚C
caused by the abnormal function or the failure of our Distance from can case Period of time
product. 1 to 3mm Within 3 seconds per point
(3) In case of outdoor use, suitable optical filter and water Over 3mm Within 10 seconds per point
and humidity proof structure should be applied.
(4) To prevent failure or malfunction, please use a stabilized (c) Soldering flux should be rosin flux and not contain
power supply. more than 0.2wt% chlorine.
(5) Please avoid using the sensor in the following conditions Soldering flux should be removed after soldering.
because it may cause failure or malfunction. (2) Cleaning
(a) in such a fluid as water, alcohol etc. corrosive gas Soldering flux should be removed after soldering.
(SO2, Cl2, NOX etc.) or sea breeze Soldering flux may cause malfunction or degradation of
(b) in high humidity character unless sufficiently cleaned.
(c) in a place exposed directly to sunlight or headlights of
automobile 3. Caution (Handling and Storage)
(d) in a place exposed to rapid ambient temperature (1) The optical filter of the sensor should not be scratched or
change soiled.
(e) in a place exposed directly to an air-conditioner or (2) Strong shock should be avoided.
heat vent (3) Electrostatics and strong electromagnetic field should be
(f) strong vibrations avoided.
(g) in a place exposed to strong electromagnetic field (4) The sensor should be kept on conductive sponge.
(h) in such a place where infrared ray is shaded (5) High temperature, high humidity, fluid such as water or
(i) in any other place similar to the above (a) through (h) alcohol etc., corrosive gas (SO2, Cl2, NOX etc.) and sea
breeze should be avoided.
13
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering. S21E.pdf
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 09.6.24