Académique Documents
Professionnel Documents
Culture Documents
Number: HP0-096
Passing Score: 800
Time Limit: 120 min
File Version: 2010-08-05
Code:HP0-096
Version:2010-08-05
The exists many idea and new question added . really superb cert.
QUESTION 1
HP PA-RISC processors contain which features? (Select three.)
Answer: CEF
Section: (none)
Explanation/Reference:
QUESTION 2
What function does the swapper perform in the HP-UX operating system?
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 3
Management purchases an Integrity Superdome to replace two rp8420 servers. There is available CPU
capacity and management decides to bring additional applications for execution on the Integrity Superdome.
Given this scenario, which statement could be true?
A. Some of the applications are Linux-based, and Linux applications are not qualified to run on the
Superdome.
B. The Superdome may be on the verge of an I/O bottleneck, as the Superdome has fewer I/O slots per cell
than the rp8420.
C. Some of the applications are Windows-based, that run alongside your HP-UX applications in a different soft
partition of the Superdome.
D. Some of the applications are Windows-based, that run alongside your HP-UX applications in a different
hard partition of the Superdome.
Answer: D
Section: (none)
Explanation/Reference:
Answer: BE
Section: (none)
Explanation/Reference:
QUESTION 5
Which objects are valid VxVM objects? (Select four.)
A. plex
B. rootdg
C. cat_vol
D. VM_obj
E. volume
F. subdisk
G. phys_vol
H. mirror_disk
Answer: ABEF
Section: (none)
Explanation/Reference:
QUESTION 6
Neighbor discovery is a component of which protocol?
A. IPv6
B. ARP
C. OSPF
D. DHCP
Answer: A
Section: (none)
Explanation/Reference:
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 8
A new gateway machine, IP address 145.1.22.100, allows access to a business partner with a network number
of 15. Which command creates a static route to the business partner's network?
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 9
What is the configuration file for the HP CIFS Server product?
A. /etc/opt/samba/smb.conf
B. /etc/opt/samba/cifs.conf
C. /etc/opt/samba/swat.conf
D. /etc/opt/samba/samba.conf
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 10
When a connection is established with inetd for a service, inetd runs the
appropriate server specified in the /etc/inetd.conf file and waits for other connections. Which HP-UX
application can be used in addition to inetd to verify whether a host or network can execute a service
provided in inetd.conf?
A. IPsec
B. IPfilter
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 11
Which feature allows the LDAP-UX client to retrieve information from LDAP Directory Servers that do not
support RFC2307?
A. SASL
B. attribute mapping
C. configuration profile
D. service search descriptors
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 12
What is the ndd command used for?
A. ARPA tuning
B. network tuning
C. NIC configuration
D. bind configuration
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 13
Which command talks directly to the sendmail daemon and other SMTP servers to verify connectivity?
A. telnet host 23
B. telnet host 80
C. telnet host 25
D. telnet host 110
Answer: C
Section: (none)
Explanation/Reference:
A. /sbin/init.d/net
B. /sbin/init.d/named
C. /sbin/init.d/nfs.core
D. /sbin/init.d/rpcbind
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 15
Which statements describe the default behavior of the NFS Version 2 and 3 server daemons and threads?
(Select three.)
Answer: ABD
Section: (none)
Explanation/Reference:
QUESTION 16
Which command reports the speed and duplex settings of a network interface card?
A. ioscan
B. netstat
C. lanadmin
D. ifconfig
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 17
Which command uses NTP to keep the local system clock in sync with other nodes on the network?
A. /usr/sbin/ntpsync
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 18
Which command scans for system hardware, interface cards, usable I/O system devices, or kernel I/O?
A. ioscan
B. lanscan
C. sysview
D. scansys
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 19
Which command creates an Ignite-UX setup file for a depot?
A. make_config
B. make_depots
C. create_setup
D. make_bundles
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 20
What does the /var/adm/sw/products directory contain?
Answer: B
Section: (none)
Explanation/Reference:
A. Enterprise OE
B. Foundation OE
C. Mission Critical OE
D. Technical Computing OE
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 22
What does the following entry in the /etc/dhcptab field state? class-id="PXEClient:Arch:00002:.*":\
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 23
What is the purpose of the update-ux tool?
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 24
After setting up an Ignite-UX server, the client is not able to find the server.
Answer: ABD
Section: (none)
Explanation/Reference:
QUESTION 25
Assuming two machines are on the same subnet, which file must be configured on an Ignite-UX server to allow
a PA-RISC client to perform a network boot?
A. dhcptab
B. bootptab
C. ux_bootptab
D. instl_boottab
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 26
Which statements are true when using make_net_recovery to recover a system? (Select two.)
Answer: CE
Section: (none)
Explanation/Reference:
QUESTION 27
How does SD-UX keep track of software installed on a system?
Explanation/Reference:
QUESTION 28
How do you allow other hosts on the network to use software located in the SD-UX depot?
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 29
Where are group privileges set so they will be retained following a reboot?
A. /etc/privgroup
B. /stand/privgroup
C. /etc/privgroup.conf
D. /etc/rc.config.d/privgroup
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 30
What is the difference between tunnel mode and transport mode when using IPSec?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 31
Answer: E
Section: (none)
Explanation/Reference:
QUESTION 32
You have been managing the UNIX Server, usersys02, for two years and all patches and OS updates are
current. During your daily operations you notice that there are multiple logins for user, manager04, using the
who command. You know that the manager is not running that many sessions. In addition to discussing best
security practices with the manager, which other action can you take?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 33
Which product can be used to limit the number of inbound connections to a TCP port?
A. IPSec
B. IPFilter
C. Ethereal
D. OpenSSL
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 34
You are asked to evaluate the possibility of implementing shadow passwords on your system. Which statement
accurately describes the features and advantages of the HP-UX shadow password mechanism?
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 35
Click the Exhibit button.
Given the output from syslog.log, which statement describes what has happened?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 36
Which directory structure is always present on a trusted system?
A. /tcb
B. /sec
C. /pam
D. /trusted
Answer: A
Section: (none)
Explanation/Reference:
A. authentication
B. session management
C. account management
D. hostname management
E. password management
F. process audit management
G. access control list management
Answer: ABCE
Section: (none)
Explanation/Reference:
QUESTION 38
What effect does the /etc/securetty file have on system login?
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 39
Which features can be set on a per user basis WITHOUT enabling Trusted Mode? (Select three.)
A. password history
B. disable console login
C. UMASK environment variable
D. displaying last login at login time
E. abort login on missing home directory
Answer: ACD
Section: (none)
Explanation/Reference:
QUESTION 40
What are features or benefits of Bastille? (Select three.)
Answer: ABF
Section: (none)
Explanation/Reference:
QUESTION 41
Click the Task button.
Using drag and drop, match the Internet Services to the appropriate capability.
A.
B.
C.
D.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 42
A. Search for all files more than 14 hours old that are larger than 1000 bytes. Prompt the user to delete each
file found that matches the search criteria.
B. Search for all files more than two weeks old that are larger than 10 characters. Prompt the user to delete
each file found that matches the search criteria.
C. Search for all files more than two weeks old that are larger than 1000 bytes. Prompt the user to delete each
file found that matches the search criteria.
D. Search for all files more than two weeks old that are larger than 1000 characters. Prompt the user to
rename each file found that matches the search criteria.
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 43
Click the Exhibit button.
What happens in the script if the user clicks the key sequence <Ctrl><c> while the script is running?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 44
Click the Exhibit button.
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 45
Click the Task button. Within the hot area diagram, click on the weekday
column for the cron_extract.ksh script.
A.
B.
C.
D.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 46
Given an HP-UX system where the /var/adm/cron/cron.allow file is empty,
who is allowed to use cron?
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 47
Which are valid statements when referring to changing system run levels? (Select two.)
Answer: DE
Section: (none)
Explanation/Reference:
QUESTION 48
What are examples of SYS-V IPC services? (Select three.)
A. signals
B. threads
C. semaphores
D. sense switches
E. shared memory
F. message queues
Answer: CEF
Section: (none)
Explanation/Reference:
QUESTION 49
Which command shuts down the system after 7 minutes and then reboots?
A. shutdown -r 7
B. shutdown -r 420
C. reboot -R -H -t 7
D. reboot -R -H -t 420
Explanation/Reference:
QUESTION 50
You have multiple vPars running within a single nPar. How do you boot the HP-UX kernel on the nPar after the
vPars are defined and have been booted?
A. once vPars are configured, the kernel CANNOT be booted into the nPar without reinstalling HP-UX from an
Ignite server
B. from any running vPar kernel: execute shutdown -r -N -v all now
C. 1) from each vPar kernel except one: shutdown -h now
2) from the remaining vPar kernel: shutdown -R now
3) from the virtual console: CM>REBOOT -v ALL -N <nPar#>
D. 1) from each vPar kernel: shutdown -h now
2) from the vPars monitor: MON>reboot
3) from the BCH on the nPar console: bo pri to interact with the ISL 4) from the ISL: ISL> hpux /stand/
vmunix
E. 1) from each vPar kernel: shutdown -h now
2) from the vPars monitor: MON>reboot
3) from the ISL: ISL> hpux /stand/vmunix
4) from the virtual console: CM>REBOOT -v ALL -N <nPar#>
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 51
Which situation will cause a device to display a software status of UNCLAIMED in ioscan?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 52
How do you monitor an HP-UX server with a suspected paging issue? (Select three.)
A. use iostat
B. use vmstat
Answer: ABD
Section: (none)
Explanation/Reference:
QUESTION 53
What is a requirement when using SAM with a text terminal?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 54
Which properties can be adjusted using entries in /etc/default? (Select three.)
A. time zone
B. syslog size
C. file system type
D. password aging
E. volume manager
F. new user properties
Answer: ACF
Section: (none)
Explanation/Reference:
QUESTION 55
What are symptoms of a CPU bottleneck? (Select two.)
Answer: BF
Section: (none)
Explanation/Reference:
QUESTION 56
Which sequence of commands checks the integrity of the file system when syslog indicates there are file
system errors on /dev/vg01/lvol09?
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 57
You have set up a Serviceguard cluster but received notification from network security that the current
configuration exposes remote user login risks and must be remediated.
A. $HOME/.rhosts
B. /etc/hosts.equiv
C. /etc/cmcluster/cmclconfig
D. /etc/cmcluster/cmclnodelist
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 58
On which nodes in a Serviceguard cluster is the cmcld daemon required to run?
A. all nodes
B. on only one node
C. on at least two nodes
D. optional for clusters less than 4 nodes
Answer: A
Section: (none)
QUESTION 59
Why is a relocatable IP address beneficial?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 60
In order to disable volume group activation at boot time, which file needs to be modified?
A. /etc/lvmrc
B. /etc/inittab
C. /etc/cmcluster/cmnodevg
D. /etc/cmcluster/qs_authfile
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 61
Which command creates templates to be used for package setup?
A. cmrunpkg
B. cmmakepkg
C. cmquerycl
D. cmgetconf
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 62
The '-r' option to 'netstat' provides which type of information?
A. routing table
B. remote routers
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 63
Click the Task button. Using drag and drop, arrange the OSI Model layers in the correct order. Some panels will
not be used.
A.
B.
C.
D.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 64
The address 224.0.0.0 is an example of which type of address?
A. netcast
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 65
Which command lists the status of the NTP servers and clients?
A. ntpq
B. ntpstat
C. ntpdate
D. ntpinfo
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 66
The name service switch configuration file contains the following line:
Which statement is true regarding hostname resolution assuming all hostnames are in DNS?
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 67
Which features are supported by the Netscape/Red Hat Directory Server? (Select three.)
A. ADSI API
B. NTLM authentication
C. multi-master replication
D. replication with Novell eDirectory
E. secure communications using SSL/TLS
Answer: CEF
Section: (none)
Explanation/Reference:
QUESTION 68
Which file defines configuration values for IPv6 networking?
A. /etc/ipv6.conf
B. /etc/rc.config.d/nd6.conf
C. /etc/rc.config.d/netconf-ipv6
D. /etc/rc.config.d/ipv6config.conf
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 69
On a network with a host IP address of 15.77.100.3 and a subnet mask of 255.255.252.0, how many hosts are
allowed per subnet?
A. 1022
B. 2046
C. 4094
D. 8190
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 70
Which daemon must be running for the system to retrieve user and group information from an LDAP server?
A. ldapd
B. pwgrd
C. ns-slapd
D. ldapclientd
Answer: D
Section: (none)
Explanation/Reference:
Answer: AC
Section: (none)
Explanation/Reference:
QUESTION 72
Which command starts the Apache Web Server?
A. /sbin/apache start
B. /sbin/init.d/apache start
C. /var/apache/bin/apache start
D. /etc/rc.config.d/apacheconf start
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 73
Which delivery agent is supported for use with HP-UX sendmail?
A. biff
B. SMTP
C. SNMP
D. Eudora
E. Exchange
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 74
In /var/adm/inetd.sec, which entry allows hosts on network 10 rlogin access
to the local host, 12.50.18.34?
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 75
What is the first step when creating an NIS Master server?
A. nisinit -a
B. update all ASCII source files
C. /sbin/init.d/ypinit start
D. /sbin/init.d/nis.server start
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 76
Which command provides access to DHCP related options for the bootpd daemon?
A. dhcpdconf
B. dhcptools
C. bootpdconf
D. bootpdtools
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 77
Click the Task button.
Using drag and drop, order the steps to create a volume group named vg_app on disk c2t3d0 with physical
extent size of 8 MB and 8192 physical extents.
Some panels will not be used. There is more than one correct answer.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 78
When a cell is added to or deleted from the configuration of a node partition, what must be done so the partition
will recognize the change?
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 79
If the console output displays a FAIL message of a service or application during system startup, which file can
provide additional information on the symptoms?
A. /etc/salog
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 80
What is the lowest run level where network services are normally started?
A. 1
B. 2
C. 3
D. 4
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 81
Setting the nproc tunable parameter too low can result in which message?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 82
Which service or function uses chroot by default?
A. telnet
B. anonymous ftp
C. changing the root password
D. changing the name of the root user
Answer: B
Section: (none)
QUESTION 83
Which command identifies the parameters that are dynamically tunable on HP-UX?
A. kctune
B. sysdef
C. kernel -d
D. set_parms -k
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 84
Click the Exhibit button.
A. sar
B. ipcs
C. pipcs
D. netstat -in
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 85
Which kernel module states are available on an HP-UX 11iv2 system? (Select four.)
A. best
Answer: ABDF
Section: (none)
Explanation/Reference:
QUESTION 86
When booting a node partition, how can you observe the progress of the cell's power-on self-testing from the
MP? (Select two.)
Answer: BC
Section: (none)
Explanation/Reference:
QUESTION 87
What is used to eliminate "split-brain" syndrome?
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 88
The Cluster Manager is responsible for which function?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 89
After installing HP Serviceguard on a server, which additional software or software products should be audited
to ensure they are installed? (Select three.)
A. Ignite/UX
B. OnlineJFS
C. MirrorDisk/UX
D. EMS HA Monitors
E. Cluster Object Manager
F. Serviceguard related patches
Answer: DEF
Section: (none)
Explanation/Reference:
QUESTION 90
After performing maintenance and then running the cmruncl command, you receive an error stating: "Activation
mode requested for the volume group conflicts with configured mode". What is a possible reason for this?
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 91
What is an optional requirement when setting up a Serviceguard cluster?
Answer: D
Section: (none)
QUESTION 92
You pushed out a client installation from an IUX server in the evening. The next morning the installation is not
finished and you are prompted for the root password. Why?
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 93
Which statements are true regarding the bootpd/DHCP protocol during boot? (Select two.)
Answer: AB
Section: (none)
Explanation/Reference:
QUESTION 94
A customer needs HP Serviceguard for High Availability. What is the minimum Operating Environment you can
install?
A. Enterprise OE
B. Foundation OE
C. Mission Critical OE
D. Technical Computing OE
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 95
Answer: A
Section: (none)
Explanation/Reference:
QUESTION 96
After configuring an Ignite-UX boot helper to use the correct Ignite-UX server, which file contains the changes
that identify the Ignite-UX server?
A. bootptab
B. WINSTALL
C. INSTALLFS
D. instl_boottab
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 97
Which command confirms software is installed and configured successfully?
A. swjob
B. swlist
C. swcheck
D. swverify
E. swconfig
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 98
What does the BootROM chip of a PA-RISC system contain? (Select three.)
A. IODC
B. POST
C. NVRAM
D. Boot LIF
Answer: ABF
Section: (none)
Explanation/Reference:
QUESTION 99
Click the Task button.
Using drag and drop, match each patch type to the appropriate functionality.
A.
B.
C.
D.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 100
When do you use the IT Resource Center Patch Assessment Tool?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 101
Click the Task button.
Using drag and drop, place the steps to add software from a non-core archive in the correct sequence.
A.
B.
C.
D.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 102
Which HP-UX feature enables you to see your last login information to be displayed during login?
A. Trusted System
B. add secure login group
C. creation of /etc/shadow
D. secure Internet services
Explanation/Reference:
QUESTION 103
Click the Exhibit button.
Which command can be executed to get processor information from an Integrity system running HP-UX?
A. procinfo
B. cpu_info
C. machinfo
D. cpuinfo -v
E. procinfo -v
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 104
Which commands create a file with paths to all files named bob and display the files on the screen as they are
identified? (Select two.)
Answer: AE
Section: (none)
Explanation/Reference:
QUESTION 105
Which variable holds the result status of an executed command?
A. $!
B. $#
C. $?
D. $error
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 106
The execution scripts for rwhod and xntpd are configured in which configuration file?
A. /etc/rc.config.d/netconf
B. /etc/rc.config.d/mailsvrs
C. /etc/rc.config.d/namesvrs
D. /etc/rc.config.d/netdaemons
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 107
Click the Exhibit button.
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 108
How do you search through all man pages for a command?
A. man -c keyword
B. man -k keyword
C. man -s keyword
D. man -v keyword
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 109
On an HP-UX system, an empty cron.deny file exists but there is not a
cron.allow file. Who can use cron in this situation?
A. nobody
B. only root
C. everybody
D. only system accounts
Answer: C
Section: (none)
QUESTION 110
Which features of Trusted Mode are available in Standard Mode? (Select three.)
A. auditing
B. password history
C. restricted login times
D. system generated passwords
E. passwords longer than 8 characters
Answer: ABC
Section: (none)
Explanation/Reference:
QUESTION 111
Consider the fragment of the hosts.equiv file for host, Server1, shown
below. Which option correctly describes the resulting security on host Server1? Alan -Beth +Carlos
A. deny password-free access to user Beth when attempting to log into host Alan; allow all users from host
Carlos password-free access to host Server1
B. deny password-free access to user Alan when user Alan attempts to log in from host Beth; allow user
Carlos password-free access to all accounts (except root) on host Server1 from any host
C. deny password-free access to user Beth when user Beth attempts to log in from host Alan; grant user
Carlos password-free access to all accounts (except root) on host Server1 from any host on the network
D. deny password-free access to user Beth when user Beth attempts to log in from host Alan; allow user
Carlos password-free access to Carlos' account (except root) on host Server1 from any host on the network
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 112
Which daemon is used to monitor and rotate audit log files?
A. auditd
B. audsys
C. audomon
D. audit_monitor
Answer: C
Section: (none)
Explanation/Reference:
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 114
Which function does the pwck command perform?
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 115
Click the Task button.
Given the following requirements, use drag and drop to order the PAM modules and control flags.
Authenticate the user against PAM_UNIX 1st; if that is successful stop the authentication process.
If the user fails to authenticate using PAM_UNIX, try to authenticate the user with PAM_LDAP.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 116
In trusted mode, which file is modified to force the system to generate all new passwords?
A. /etc/profile
B. /etc/default/password
C. /tcb/files/system/password
D. /tcb/files/auth/system/default
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 117
Which phrase best describes a DMZ?
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 118
Which kernel tunable can be set to prevent stack buffer overflow attacks?
A. tunable st_fail_overruns = 0
B. tunable st_fail_overruns = 1
C. tunable executable_stack = 1
D. tunable executable_stack = 0
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 119
You have been managing a UNIX Server, system02, running HP-UX Trusted System for two years and all
patches and OS updates are current. You are preparing to do your monthly maintenance and want to ensure no
new logins occur. You also want to make sure that no one can login during the maintenance period. Which
actions do you need to take? (Select two.)
Answer: AF
Section: (none)
Explanation/Reference:
QUESTION 120
You have been managing a UNIX Server, system02, for two years and all patches and OS updates are current.
Why would the network security group send you a message to add the following line to your ARP configuration
file?
system03 00:30:6e:5c:3f:f8
Answer: C
Section: (none)
Explanation/Reference:
QUESTION 121
What is the default directory where PAM (Pluggable Authentication Module) libraries are located?
A. /usr/lib
B. /usr/local/lib
C. /usr/contrib/lib
D. /usr/lib/security
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 122
Which procedures configure tcpwrappers for ftpd? (Select two.)
Answer: BD
Section: (none)
Explanation/Reference:
QUESTION 123
Which VxVM daemons need to be running for the volume manager to operate correctly?
Answer: D
Section: (none)
QUESTION 124
Click the Task button.
Using drag and drop, prioritize the scheduling policies in order of importance.
A.
B.
C.
D.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 125
What are three design features of current HP9000 servers? (Select three.)
Answer: BCD
Section: (none)
Explanation/Reference:
QUESTION 126
What statements are correct concerning the terms thread and process for a system running HP-UX? (Select
Answer: AEF
Section: (none)
Explanation/Reference:
QUESTION 127
Click the Task button.
Using drag and drop, build the command line to create the volume group control file of vg01. Panels can be
used multiple times or not used.
A.
B.
C.
D.
Answer:
Section: (none)
Explanation/Reference:
QUESTION 128
A new gateway machine, IP address 145.1.22.100, allows access to a business partner with a network number
of 15. Which command creates a static route to the business partner's network?
Answer: D
Section: (none)
Explanation/Reference:
QUESTION 129
After setting up an Ignite-UX server, the client is not able to find the server.
Answer: ABD
Section: (none)
Explanation/Reference:
QUESTION 130
Which command creates templates to be used for package setup?
A. cmrunpkg
B. cmmakepkg
C. cmquerycl
D. cmgetconf
Answer: B
Section: (none)
Explanation/Reference:
QUESTION 131
What is the first step when creating an NIS Master server?
A. nisinit -a
B. update all ASCII source files
C. /sbin/init.d/ypinit start
D. /sbin/init.d/nis.server start
Explanation/Reference: