Académique Documents
Professionnel Documents
Culture Documents
HR-P41A
OPERATE STANDBY
NTSC INTELLIGENT
SP/LP/EP ON PAL TV PICTURE
NTSC 3.58/4.43 INTELLIGENT
PICTURE LP/EP
NTSC3.58
PAL NTSC
VIDEO CASSETTE RECORDING & PLAYBACK NTSC4.43
PLAYER
HR-P41A
PAL NTSC
INSTRUCTIONS
PU30425-1844
Table of contents Precautions
Thank you for purchasing this JVC video cassette player. To The rating plate and the safety caution are on the rear of the unit.
ensure optimum performance of this unit, please read this
instruction manual thoroughly. WARNING: DANGEROUS VOLTAGE IN-
Precautions ........................................................................... 2
SIDE
Controls and terminals .......................................................... 3 WARNING: TO PREVENT FIRE OR SHOCK
Wireless remote control ........................................................ 4 HAZARD, DO NOT EXPOSE
Connections .......................................................................... 5 THIS UNIT TO RAIN OR
Setting the video channel ...................................................... 6
The video cassette ................................................................ 6 MOISTURE.
Playback ................................................................................ 7
Playback features .................................................................. 8
Recording .............................................................................. 9 The OPERATE button does not completely shut off mains
Editing ................................................................................... 9 power from the unit, but switches operating current on and
Troubleshooting .................................................................. 10 off.
Specifications ...................................................................... 10
Features This unit is produced to comply with Standard IEC Publ. 65.
• 3 system (PAL/MESECAM/NTSC) Please follow these precautions. Not doing so may result
• NTSC playback (on PAL television) in damage to the VCP, remote control, or video cassette.
• RF output G/K switchable
• Digital auto tracking • Avoid extreme heat and direct sunlight.
• HQ (High Quality) • Avoid extreme cold.
• Intelligent picture • Avoid extreme humidity.
• Auto playback function • Avoid dust.
• Repeat playback • Avoid places subject to vibrations.
• Shuttle search • Avoid strong magnetic fields.
• Still and slow motion • Do not block the VCP’s ventilation openings.
• Line recording • Do not place anything heavy on the VCP or remote
control.
• Do not place anything which might spill on top of the
Automatic features VCP or remote control.
• Do not place the VCP on cushions, pillows, or thick
Auto power on carpeting.
The video cassette player is automatically turned on when the • Use the VCP in a stable, horizontal position only.
tape is inserted. • Place cassettes in cassette cases and store vertically.
Auto rewind Beware of moisture condensation
The video tape is automatically rewound when the end of the Moisture in the air will condense on the VCP when you move it
tape is reached during the play, recording or shuttle search from a cold place to a warm place, or under extremely humid
forward mode. conditions — just as water droplets form on the surface of a
glass filled with cold liquid. Moisture condensation on the head
Auto playback drum will cause damage to the tape. In conditions where
If the video cassette’s safety tab has been removed, playback condensation may occur, keep the VCP’s power turned on for
will begin automatically when the tape is inserted into the video a few hours to let the moisture dry.
cassette player.
When transporting
Power off eject 7 Be sure to remove cassette from VCP before packing.
Even when the video cassette player’s power is off, pressing the 7 Avoid violent shocks to the VCP during packing and trans-
eject button will turn the power on and eject the tape. Once port.
ejected, the power will be turned off again automatically.
PAL NTSC
2
Controls and terminals
Front panel
1 2 3 45
OPERATE STANDBY
NTSC INTELLIGENT
SP/LP/EP ON PAL TV PICTURE
NTSC 3.58/4.43 INTELLIGENT
PICTURE LP/EP
NTSC3.58
PAL NTSC
VIDEO CASSETTE RECORDING & PLAYBACK NTSC4.43
PLAYER
HR-P41A
$ # " ! 9 876
1 OPERATE button 0 Remote sensor window
To turn the power on and off (standby mode). For remote control operation.
Rear panel
1 23 4 5 1 AC power cord
2 RF channel adjustment screw
3 RF. OUT terminal
40
32
10-
4 AUDIO/VIDEO IN terminals
K
G
RF OUT
AUDIO
IN OUT
5 AUDIO/VIDEO OUT terminals
ANT.
IN
1-
VIDEO
6 ANT. IN terminal
7 TV system switch
76
3
Wireless remote control
NTSC INTELLIGENT
SP/LP/EP ON PAL TV PICTURE
NTSC 3.58/4.43 INTELLIGENT
PICTURE LP/EP
NTSC3.58
PAL NTSC
VIDEO CASSETTE RECORDING & PLAYBACK NTSC4.43
PLAYER
HR-P41A
television.
1 Transmitting window
1 2 TV channel –/+ buttons
3 TV VOLUME –/+ buttons
TV
4 TV/VIDEO (Player) button
2 - TVCH + OPERATE
9 Not function
- VOLUME + TV/VIDEO
3 ! 5 Digital AUTO TRACKING button
To cancel the Auto tracking mode.
VIDEO
TV/VIDEO OPERATE
6 Rewind 1 + button
4 AUTO - TRACKING +
" To rewind the video tape. Also to start reverse shuttle
search playback.
5 (+ - +(
# 7 Play 3 button
6 $ To start playback.
[ L J
8 Record ¶ button
7 % Press the Record ¶ and Play 3 buttons together, to start
8 & recording.
1 2
4
Connections
Make sure that the power to the video cassette player and TV
is off before making the following connections.
Connection A
10-
40
32
RF OUT IN OUT
K AUDIO
G
ANT.
IN VIDEO
1-
Connection B
Note:
If you put a TV set directly on this VCP or install it too close to
a TV set, noise may occur. If this noise occurs, separate the
VCP and the TV set.
Connect the power cord to your household AC outlet. 2 Connect the TV’s VIDEO OUT and AUDIO OUT termi-
nals to the video cassette player’s VIDEO IN and AU-
3 DIO IN terminals.
TV system
The TV system switch should be set as follows.
K position: Set to this position for K system areas (East-
ern European countries).
G position: Set to this position for G system areas (West-
ern European countries for example).
K
G
Note:
• When connection B is used to connect the TV and video
cassette player, setting the TV system switch is not
necessary.
5
Setting the video channel The video cassette
Note:
• When you have connected the VIDEO/AUDIO OUT termi- SP/LP/EP
NTSC 3.58/4.43
OPERATE
INTELLIGENT
PICTURE
STANDBY
LP/EP
NTSC
ON PAL TV
NTSC3.58
INTELLIGENT
PICTURE
NTSC INTELLIGENT
SP/LP/EP ON PAL TV PICTURE
NTSC 3.58/4.43 INTELLIGENT
PICTURE LP/EP
NTSC3.58
PAL NTSC
VIDEO CASSETTE RECORDING & PLAYBACK NTSC4.43
PLAYER
HR-P41A
6
Playback
- VOLUME + TV/VIDEO
+ OPERATE
INTELLIGENT
PICTURE
STANDBY
LP/EP
NTSC
ON PAL TV
NTSC3.58
NTSC4.43
PAL NTSC
INTELLIGENT
PICTURE
(+
[
-
L
+(
J
2 Select this mode to watch NTSC tapes on a PAL system TV.
NTSC
REMOTE CONTROL UNIT ON PAL TV
NTSC3.58
NTSC4.43
NTSC
ON PAL TV
NTSC3.58
NTSC4.43
7
Playback features
During playback:
1 Press the INTELLIGENT PICTURE button.
The INTELLIGENT PICTURE indicator will light.
Press the Pause 8 button for 2 seconds.
1 7 Press the INTELLIGENT PICTURE button to cancel this
feature.
7 Press the Play 3 button to return to the normal playback
speed.
Use this feature during playback to visually locate any point on Manual tracking
a recorded cassette. The sound will be cut during shuttle search
operation. Press the remote control’s AUTO button.
During playback:
1
1 Press the Fast forward ¡ or Rewind 1 button to
engage shuttle search forward or reverse.
2 Press the remote control’s TRACKING + or – button to
adjust tracking.
8
Recording Editing
“Connections” section. G
ANT.
AUDIO
Audio/Video signals
TV
1 2
- TVCH + OPERATE
- VOLUME + TV/VIDEO
VIDEO
TV/VIDEO OPERATE
AUTO - TRACKING +
SP/LP/EP
NTSC 3.58/4.43
RECORDING & PLAYBACK
OPERATE
INTELLIGENT
PICTURE
STANDBY
LP/EP
NTSC
ON PAL TV
NTSC3.58
NTSC4.43
PAL NTSC
INTELLIGENT
PICTURE
(+
[
-
L
+(
J
2 40
32
RF OUT
10-
IN OUT
K AUDIO
G
ANT.
IN VIDEO
1-
Recorder
9
Troubleshooting Specifications
Standard accessories
About Head cleaning Remote control unit ............................................................... 1
Batteries for remote control ................................................... 2
7 If the picture playback becomes blurred, it does not mean RF antenna cable .................................................................. 1
that the recorded program has been erased. Conversion plug .................................................................... 1
7 Dirt accumulated on the video heads after long periods of
use causes such troubles. In this case, head cleaning • Design and specifications subject to change without notice.
requiring highly technical care is necessary.
7 For head cleaning, consult the nearest JVC dealer.
10
MEMO
11