Académique Documents
Professionnel Documents
Culture Documents
Series II System
General Description
The Bose® FreeSpace 3 Series II
system is a high performance, Virtu-
ally Invisible® system engineered for a
wide range of business applications
including retail, restaurant, and
hospitality operations.
The product provides the following
Technical Information features:
FreeSpace 3 Series II System FreeSpace 3 Series II • High fidelity, extended bandwidth
reproduction of voice and music
Frequency Range Acoustimass Module (FS3B)
®
Front View
Side View
Rear View
AMPreliminary_00 _V.pdf • October 8, 2002
Top View Front View
Side View
Rear View
Front View
Side View
Rear View
Side View
FS3F satellite speaker. Rough-in The module shall have one 5.25" expanded metal grille and shall meet
pans are available for flush-mounting (13.3 cm) dual voice coil low- plenum ratings when used with a
in hard ceilings or walls (and re- frequency driver. The module shall plenum cover. The surface-mount
quired for installing the module that have an input impedance of 6Ω for satellite shall have a cloth grille and
way). The Bose 8/32 junction box direct connection to unequalized low- black or white polymer finish.
may be used with the rough-in pan impedance amplifier sources. The The loudspeaker shall be the Bose
or tile bridge for pre-wiring that system shall be configured for use FreeSpace 3 Series II loudspeaker
meets local building codes. with either a 70/100V input or a low- system.
impedance input. The transformer
For pendant-mounting in an open shall offer multiple taps of 25W, 50W,
ceiling, the FS3B Pendant-Mount Kit Safety and Regulatory
100W, and 200W.
offers a suspension cable, eye bolts Compliance
for cable installation, and a cosmetic Each satellite speaker shall have one
2.5" (6.3 cm) full-range driver. The The Bose FreeSpace 3 Series II
cover for the module. For the FS3F loudspeakers have passed extensive
satellite speakers, an optional nominal average dispersion shall be
170˚ at –6dB. testing and comply with the following
cosmetic cover can be used in specifications and uses:
conjunction with solid conduit The input connectors shall consist of
attached to the satellite rear cover. multi-position screw-type barriers on UL1480 listed:
An optional surface-mount kit for the the Acoustimass module, a two-
• General-Purpose Use, UL Category
module provides a wall- or ceiling- position guillotine connector on the
flush-mount satellite, and a two- UEAY, File Number S 5591
mount bracket and cosmetic cover
that coverts the Series II module into position screw-type barrier on the Air-handling spaces (ceiling ple-
a surface-mount speaker. The surface-mount satellite. Wire jumpers nums), FS3 module and flush-mount
surface-mount satellite speakers for transformer settings shall be satellite:
include mounting brackets that allow provided. Removable covers shall
shield all bass module input and • UL-2043 When used with the PC-
for easy installation and aiming at FS3F and PC-FS3B Plenum Cover
± 30˚ pitch and ±90˚ yaw. jumper connections.
accessories
The FS3F and FS3B plenum cover The Acoustimass module shall have
allow each loudspeaker to meet fire dimensions of 15.4" (39.1 cm) outer • NFPA-70 National Electric Code
codes for installing in air-handling flange diameter; 14.25" (36.1 cm) 2002, Article 300-22(c)
spaces. ceiling hole diameter; and 7.5"
(19.0 cm) height to top of housing. It • NFPA-90-A-1996 Installation of Air
Note: This product is equipped shall weigh 14 lb (6.36 kg). Each Conditioning and Ventilation
with a protection circuit that surface-mount satellite shall measure Systems, Section 2-3.10.1(a),
reduces the volume to a very low 3.0"H x 3.0"W x 4.0"D (7.7 cm x 7.7 Exception 3
level when over-powered. In the cm
event that the protection circuit is x 10.2 cm) and shall weigh 1.75 lb EMC Directive 89/336/EEC and
activated, turn off the signal source (0.8 kg). Each flush-mount satellite Article 10 (1) of the directive,
for 30 seconds for full recovery. EN50081-1, and EN50082-1, as
signified by the CE mark.
Loudspeaker Configuration
The FreeSpace 3 loudspeaker
®
FreeSpace 3 satellites, the module
system consists of a flush-mount must have a separate amplifier
Acoustimass module plus two to
®
channel and must not connect to the
four satellite speakers of flush- or other speakers.
surface-mount design. The module Detailed installation and setup instruc-
may also be mounted on the surface tions are provided in the Bose
of a wall or ceiling using the optional FreeSpace 3 Series II Loudspeaker
surface-mount kit. System Installation Guide found on the
The module alone may be used for website http:\\ pro.bose.com.
bass augmentation with other Bose
speakers, such as the FreeSpace Warranty Information
Model 16, Model 32, Model 32SE or
FreeSpace 6 loudspeakers. The Bose FreeSpace 3 Series II
loudspeaker system is covered by a ©2002 Bose Corporation, The Mountain
With loudspeakers other than the five-year transferable limited warranty.
Framingham, MA 01701-9168 USA
268120 AM Rev.00 PC030504 JN30604
AMPreliminary_00 _V.pdf
Subject to change without •notice.
October 8, 2002