Académique Documents
Professionnel Documents
Culture Documents
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time : 20 - 30 minutes
● Tools Required for Assembly (not included) : Flathead Screwdriver , Phillips Screwdriver, Pliers,
Electrical Tape, Wire Cutters, Safety Glasses & (3) 60W G16 1/2 candelabra base Bulbs.
● Helpful Tools (not included) : Wire Strippers.
1 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : RFR5003NR,RFR5003PV
STEP 1 :
a. Determine the Rods to be assembled according to your
desired hanging height.
b. Pass the Supply Wires with Ground Wire through the
chosen Rods and then thread Rods and Socket Assembly 6” Rod
together as shown. Tighten until snug.
6” Rod
12” Rod
12” Rod
D5/8” Rod
Supply Wires
with Ground
Wire
Socket Assembly
STEP 2 :
a . Pass the Supply Wires with Ground Wire through the
Swivel and Ceiling Canopy.
Ceiling Canopy
b . Thread the Swivel onto the top end of the Upper Rod and
hand tighten until snug.
Swivel
Upper Rod
2 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : RFR5003NR,RFR5003PV
STEP 3: Crossbar
a . Secure the Crossbar to the Outlet Box with Outlet Box
Screws . Tighten until snug.
Outlet Box
Outlet Box Screw
STEP 4 :
* Use Wire Connectors ( not supplied ) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires .
a . Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b . Connect the House White ( or Ribbed ) Wire to the
BLACK ( OR RED ) WIRE BLACK OR SMOOTH
Fixture Supply Wire ( White or Ribbed Side ) .
c . Connect the House Black ( or Red ) Wire to the Fixture FROM HOUSE FROM FIXTURE
Supply Wire ( Black or Smooth Side ).
d . Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet GROUND WIRE GROUND WIRE
Box . FROM HOUSE FROM FIXTURE
STEP 5 :
a . Place the Ceiling Canopy onto Outlet Box aligning 3 holes
on the edge of the Ceiling Canopy and Mounting Holes on Outlet Box
the Crossbar. Crossbar
b. Using screwdriver, thread Mounting Screws into the
mounting holes on the Crossbar and hand tighten until
Ceiling
snug to secure the fixture. Canopy
Mounting Screw
STEP 6 :
a. Place the Shade onto the Candle Cover as shown.
Shade
Candle Cover
3 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : RFR5003NR,RFR5003PV
STEP 7 :
a . Install correct bulbs referring to fixture markings and / or labels for maximum wattage .
Your installation is completed now . Restore electricity . Retain this sheet for future reference .
4 OF 4