Académique Documents
Professionnel Documents
Culture Documents
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 STYLE NUMBER: VTBK8502Z, VTMT8502C
www . quoizel . com
E Mosaic Panel 1 pc H
C
F Bulb Shield 2 pcs
I
G G9 Bulb 2 pcs
H Socket Collar 2 pcs D K
I Steel Collar 2 pcs
2
J Shade 2 pcs
K Socket Collar Tool 1 pc
1
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (2) 75W Frosted JCD G9 Bulbs (supplied).
● Helpful Tools (not included): Wire strippers.
1 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: VTBK8502Z, VTMT8502C
STEP 1: Fig. 1
a. Secure the Crossbar to the Outlet Box with Outlet Box
Screws . Tighten until snug.
Crossbar
STEP 2: Fig. 2
Use Wire Connectors (not supplied) to connect the
wires.
a. Connect the House Ground Wire to the Fixture Ground WHITE OR RIBBED WHITE OR RIBBED
Wire. FROM FIXTURE
FROM HOUSE
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side).
c. Connect the House Black (or Red) Wire to the Fixture BLACK (OR RED) WIRE BLACK OR SMOOTH
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape FROM HOUSE FROM FIXTURE
and carefully stuff all of the connected wires into the
Outlet Box. GROUND WIRE GROUND WIRE
STEP 3: Fig. 3
a. Place the Backplate over the Crossbar, line up holes on
the side of the Backplate and mounting holes on the Crossbar
folded edge of the Crossbar. Secure by threading Backplate
Mounting Screws into the mounting holes on the
Mounting
Crossbar. Hand-tighten until snug with screwdrivers. Screw
b. Insert the Round Plug into the Plug Receptacle on the
side of the Backplate as shown.
Plug
Receptacle
Round Plug
Mounting 2
Screw
2 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: VTBK8502Z, VTMT8502C
STEP 4:
[Refer to Fig.4A and Fig.4B for more detailed
Middle Slot Fig. 4
information]
Backplate
a. Place the Mounting Bracket from the Mosaic Panel into
the Middle Slot on the Backplate. (Fig.4A) Mounting
b. Slip Sliding Blocks on the back of the Mosaic Panel Bracket
over the ends of the Bar and slide them in tight towards
the Backplate. (Fig.4B)
2
Bar
Mosaic Panel
Fig. 4A L
Fig. 4B N EL
E PA
AN IC
I CP O SA
A
OS O FM
Mosaic Panel FM CK
C KO BA
B A Middle Slot
Mounting Mosaic
Bracket Panel
LED
Sliding
Block
Bar
Backplate
LED
STEP 5:
a. Place the Shade and the Steel Washer over the Socket Fig. 5
as shown. Using the Socket Collar Tool, thread the Socket Collar Tool
Socket Collar onto the Socket. Hand-tighten until snug.
Note: There are labels on the Sockets for Bulb Shields Socket Collar
assembly. You might have to remove them while you
Steel Collar
assemble the Shades. Please make notes of the
Sockets sequences before you start it.
Shade
2
Socket
1 Label
3 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: VTBK8502Z, VTMT8502C
STEP 6:
a. Install the supplied G9 Bulbs into the Socket, referring Fig. 6 Mosaic Panel
STEP 7:
a. Your installation is completed now. Restore electricity. Please note that the G9 Bulbs and the LED lights inside
of the Mosaic P anel can be turned on independently by the wall Switch (Please refer to Step 8).
b. Please retain this instruction sheet for future reference.
SWITCHING MODE
The switching features of the product allows for you to change your lighting mode from halogen to LED.
STEP 8:
a. Flip the switch “ON” and the halogen lamps illuminates.
ON...
STEP 9:
a. Flip the switch “OFF” to turn off the halogen lamps for
one second.
...One Second
OFF then...
STEP 10:
a. Flip the switch “ON” to turn the LED lamps ON.
...Back ON...
STEP 11:
a. Flip the switch “OFF” to turn off LED lamps.
...OFF
STEP 12:
a. Sequence begins over.
Note: When no switch has occurred for 30 minutes, the halogen lights are programmed to come on first.
4 OF 4