Académique Documents
Professionnel Documents
Culture Documents
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 STYLE NUMBER: CTR2823IS
www . quoizel . com
G Ceiling Canopy 1 pc D
Fixture Body 1 pc E
H
F
I Check Ring 1 pc
L
J Stem 1 pc
K Spacer Tube 1 pc
L Side Arms 1 pc
M
M Coupling 1 pc Q
1 pc N
N 1/8 IP Hex Nut
O R
O Cap 1 pc
P Finial 1 pc P
S T
Q Socket Assembly 1 pc
R Center Stem 1 pc
S Flat Washer 2 pcs
U
T Rubber Washer 2 pcs
U Shade 1 pc
V 6” Rod 2 pcs V
1 OF 5
PREPARATION STYLE NUMBER: CTR2823IS
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (4) 100W A19 medium base bulbs .
● Helpful Tools (not included): Wire strippers.
INSTALLATION INSTRUCTIONS
STEP 1: Coupling
a. Screw the end of the Stem into the Coupling on the top
center of the Socket Assembly and hand-tighten until
snug. Fixture Body
b. Unfold Side Arms to proper locations. Check Ring
c. Place the Spacer Tube, the Check Ring, the Fixture
Body and the Side Arms over the top end of the Stem in Stem
turn. Secure by threading the Coupling onto the Stem.
Hand-tighten until snug.
Side Arms
Spacer Tube
Coupling
Socket
Assembly
2 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER: CTR2823IS
STEP 2:
a. Determine the Rods to be assembled according to your
desired hanging height.
6” Rod
b. Pass the Supply Wires with Ground Wire through the
chosen Rods and then thread Rods and Fixture 6” Rod
Assembly together as shown. Hand-tighten until snug.
12” Rod
12” Rod
Fixture Assembly
STEP 3:
a. Pass the Supply Wires with Ground Wire through the Ceiling Canopy
Swivel and Ceiling Canopy.
b. Thread the Swivel onto the top end of the Upper Rod.
Hand-tighten until snug. Swivel
Upper Rod
Outlet Box
Outlet Box Screw
3 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER: CTR2823IS
STEP 5:
Use Wire Connectors (not supplied) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires.
a. Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side). BLACK (OR RED) WIRE BLACK OR SMOOTH
c. Connect the House Black (or Red) Wire to the Fixture FROM FIXTURE
FROM HOUSE
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the GROUND WIRE GROUND WIRE
Outlet Box.
FROM HOUSE FROM FIXTURE
STEP 6:
a. Place the Ceiling Canopy over the Mounting Screws
and secure with the Mounting Balls. Hand-tighten until Outlet Box
snug.
Mounting
Screw
Ceiling
Canopy
Mounting Ball
STEP 7:
a. Thread the short nipple end of the Center Stem into the
hex coupling underside of the Socket Assembly. Hand-
tighten until snug.
Socket
Assembly
Center Stem
4 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER: CTR2823IS
STEP 8:
a. Place the Flat Washers, the Rubber Washers and the
Shade over the end of the Center Stem as shown.
Secure by threading the 1/8 IP Hex Nut onto the Center
Stem. Hand-tighten until snug with pliers.
Center Stem
Flat Washer
Rubber Washer
Shade
Rubber Washer
Flat Washer
1/8 IP Hex Nut
STEP 9:
a. Place the Cap over the end of the Center Stem and
secure with the Finial. Hand-tighten until snug.
Shade
Center Stem
Cap
Finial
STEP 10:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
5 OF 5