Académique Documents
Professionnel Documents
Culture Documents
KH-MSDS-09 Revision : 1
ATOMETAL(AM-C-T) COMPONENT : B
1. Identification of substance
a. Product details :
Trade name : ATOMETAL(AM-C-T)
b. Manufacturer/Supplier :
Kyung Hung Industrial Co., Ltd.
474-2, Gasan-ri, Gasan-myun Tel : *82-31-543-2223~5
Pochun-gun, Kyunggi-do Fax: *82-31-543-2226
487-811 Korea
c. Information : laboratory
d. Emergency telephone number : *82-31-543-2272
2. Composition/Data on components
Chemical characterization
a. Description : Anti-corrosion coating for chemical Tanks, the bottom of Vessels, Ocean steel structure.
b. Ingredients:
CAS-No. Substance Wt %
100-51-6 Benzylalcohol >25
1477-55-0 M-Phenylenebis(methylene) >20
108-95-2 Phenol >3
28572-86-3 Styrene-acrylic copolymer >52
3. Hazards identification
Information pertaining to particular dangers for man and environment :
Harmful in contact with skin and if swallowed.
Causes burns.
May cause sensitization by skin contact.
Page :1/6
Material Safety Data Sheet Date of Issue : 15/11/2002
KH-MSDS-09 Revision : 1
ATOMETAL(AM-C-T) COMPONENT : B
d. After skin contact :
Remove any contaminated clothing immediately.
Remove the substance mechanically. DON'T use solvent or thinner.
Immediately following skin contact, all affected areas should be washed thoroughly with soap
and water (rinse thoroughly). Cover wound with a sterile dressing.
e. After eye contact :
Remove contact lenses. Rinse immediately with plenty of running water for at least 10
minutes. Eyelids should be held away from the eyeball to ensure thorough rinsing. Seek
medical advice if there is any suspicion of eye damage or persistent irritation.
f. After ingestion :
DON'T induce vomiting. Rinse out mouth and give plenty of water to drink with small sips
(dilution effect). Keep patient at rest. Seek medical advice immediately and show the label or
the packaging. Never give anything by mouth to an unconscious person.
Drink citrous fruit juice for neutralization.
g.Information for medical personnel :
If skin irritation or pulmanory sensitization has developed and a causal relation has been confirmed,
further exposure to the material and analogous compounds should not be allowed.
Treat chemical burns as burns.
5. Fire-fighting measures
a. Suitable extinguishing media :
CO2, dry chemical powder or water-mist. Larger fire with water-mist or alcohol resistant foam.
Page :2/6
Material Safety Data Sheet Date of Issue : 15/11/2002
KH-MSDS-09 Revision : 1
ATOMETAL(AM-C-T) COMPONENT : B
6. Accidental release measures
a. Person related safety precautions :
Wear protective equipment. All personnel remain upwind of the spill. Keep unprotected persons
away. Avoid contact with eyes and skin. Ensure sufficient ventilation.
b. Measures for environmental protection :
Do not allow to enter drainage system, surface or ground water. Inform the local authorities if the
product has entered the sewage system.
Do not allow to enter the ground/Soil. Try pumping the product in an open barrel.
c. Methods for cleaning/collection :
Provide sufficient ventilation.
Absorb with liquid-binding material (sand, earth, diatomite, acid binders, silica gel, universal
binder, sawdust). Avoid using solvents. Place in metal containers for recovery or disposal.
Place leaking containers in a marked drum. Scrub the contaminated surface with a diluted soap
solution. Consider the cleaning water as contaminated waste.
Take care of large quantities by damming and pumping.
Contaminated materials should be removed as waste.
STORAGE
a. Demands concerning storage rooms and tanks :
Sufficient ventilation in the storage rooms and working areas.
Prevent any penetration in the ground.
b. Information about storage in a common storage facility :
Not required.
c. Further information about storage conditions :
Protect containers against physical damage.
Store in a cool, dry and well ventilated place, in tightly closed containers.
Page :3/6
Material Safety Data Sheet Date of Issue : 15/11/2002
KH-MSDS-09 Revision : 1
ATOMETAL(AM-C-T) COMPONENT : B
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
a. Additional information about design of technical systems :
No further data.
b. Substances with exposure limits :
CAS-N0 substance Ref. Value-Unit
No data available
Page :4/6
Material Safety Data Sheet Date of Issue : 15/11/2002
KH-MSDS-09 Revision : 1
ATOMETAL(AM-C-T) COMPONENT : B
Page :5/6
Material Safety Data Sheet Date of Issue : 15/11/2002
KH-MSDS-09 Revision : 1
ATOMETAL(AM-C-T) COMPONENT : B
Page :6/6
cean steel structure.