Académique Documents
Professionnel Documents
Culture Documents
Coating thickness
and dew point
measurement
probes for specific
applications
Display
n High resolution graphic display
n All standard languages displayable
n Back lit display
n Flip-display by 180 degrees
Germans finest.
We produce our gauges and systems using We also use high-quality materials such as Quality by excellence as proven by our
modern facilities in Germany exclusively. integrated rubies for our proven measuring 3 years warranty.
Many aspects of work are still done by heads. Therefore, QNix® coating thickness
hand. We test our gauges with particular gauges have become a worldwide standard
care to ensure the best quality in their of user-friendliness and excellent quality
worldwide application. “Made in Germany”.
* not valid for the pen-shaped probe and for specific applications
QNix® 8500 Basic/QNix® 8500 Premium:
A perfect system.
The modular measuring system QNix® 8500 Calibration options for special Average of defined coating thickness.
offers two different gauge versions measurement conditions. On coatings of highly varying thickness
(Basic and Premium). They particularly In addition to a (constant) factory calibration, or to comply with a certain inspection
differ in functionality and storage capacity the measuring system QNix® 8500 offers two standard, set the gauge to calculate and
(see below). calibration processes that are useful during display the valid thickness measurement
specific measuring tasks such as measure- from a previously defined amount of single
Display of two coating thickness ment on curvatures or small parts. measurements.
measurements. - A one-point calibration can optimize
The “combined measurement” mode the probe’s measuring accuracy with an Measurement processing and
allows the simultaneous measurement of expected coating thickness documentation using Excel.
galvanizing and epoxy based coating on - A two point calibration can increases the Using the QNix® software the measurements
steel substrate – in one single measurement probe’s measuring accuracy in a certain can be transmitted wirelessly into an
process. The gauge then displays the coating thickness range. Excel spread sheet. This documents all
coating of the zinc and the lacquer relevant statistical analysis required by a
layers as two separate values (minimum Reliable measurements also on quality assurance system.
thickness of the metallic non-ferrous inter- rough surfaces.
layer (zinc): 50μm). On rough surfaces, an average zero
reference can be calculated and stored
from a freely determinable amount of zero
reference measurements.
The gauge, serving as storage device, display and charging station, easily fits into a
pocket or can simply fastened to the arm using the protective cover and the wristband.
Gauge
n Storage device, display and
charging station for the
QNix® 8500 sat wireless probe Wireless probe
n Thump-sized, weighing only 30 g
n Stable and safe one-hand measurements
with safety cord
n Range up to 20 meters
n Up to 4000 measurements without
recharging
n Confirmation of transmission with blue
LED signal
Magnetic-inductive pen-shaped probe MI Fe 500 μm.
The pen-shaped probe is perfectly suited for Application examples
quality controls where precision measure- n Measurements of angles, washers, screws, bolts, nuts and friction-locked connections
ments on small parts or near edges are n Ensures reliable protective coatings on steel bolts and nuts as used in rotor mountings
required. for wind energy plants or bridges and window fasteners.
n Measurements of PVD coatings such as TiN, TiCrN, CrN and TiAIN
Only the correct coating thickness on small
parts such as screws or bolts ensures Product advantages
proper adhesion force and corrosion n Measurements taken manually or with stand equipment
protection. The use of the optimized pen- n Magnetic-inductive and (optional) Hall-effect measuring method combined in one gauge
shaped probe MI Fe 500 μm can significant- n Digital measuring electronics linked with probe to keep zero reference during probe change
ly reduce interfering measurement effects n Rugged probe thanks to stainless steel design
near edges. This allows measurements n Easy adjustment thanks to probe’s pen-shape
much closer to edges and thus more
precise results on small parts. User software
n Wireless communication between PC and gauge
This interchangeable probe also allows n Read-out of gauge memory
for accurate measurements of thin, non- n Flexible analysis with Microsoft Excel
ferromagnetic metal coatings such as
chromium, copper, zinc, etc and lacquer,
enamel or synthetic coatings on ferro-
magnetic substrates.
NEW! QNix® 8500: Dew point probe*.
The dew point probe provides measure- Application examples
ments and documentation of the climatic The main field of application is the corrosion protection of steel works such as the coating of
conditions as required for surface treatment. bridges, ships and buildings. In addition the dew point probe is also used in coating work of wood,
Use this data to determine if the require- concrete, synthetic materials and non-ferrous metal.
ments for proper coating are met. That way,
corrosion damage can be avoided. Climatic parameters measured and displayed simultaneously
n Relative humidity (RH) in %
Dew point measurement is closely related n Ambient temperature (Ta) in °C or °F
to coating thickness measurement since n Surface temperature (Ts) in °C or °F
too low or too high coating thicknesses may n Dew point temperature (Td) in °C or °F
increase corrosion damage. n Ts – Td difference (dT) in °C or °F
Interchangeable 8500 Fe 8500 Fe 8500 NFe 8500 Dual Fe/NFe 8500 Dual Fe / NFe
probes/Probe type 2000 µm 5000 µm 2000 µm 2000 µm 5000 µm / 2000 µm
Measurement Method Magnetic: Magnetic: Magnetic: Magnetic: Magnetic:
Magnetic flux/ Magnetic flux/ Eddy current NFe* Magnetic flux/ Magnetic flux/
Hall effect Fe* Hall effect Fe* Hall effect Fe*/ Hall effect Fe*/
Eddy current NFe* Eddy current NFe*
According to Standard DIN EN ISO 2808, DIN 50981, DIN EN ISO 2808, DIN 50981, DIN EN ISO 2808, DIN EN ISO 2808, DIN 50981, DIN EN ISO 2808, DIN 50981
ISO 2178, BS 5411 (11), ISO 2178, BS 5411 (11), BS 3900-C5, ASTM D 7091, DIN 50984, ISO 2178, DIN 50984, ISO 2178,
BS 3900-C5, ASTM B 499, BS 3900-C5, ASTM B 499, DIN 50984, BS 5411 (3), BS 5411 (3 & 11), BS 5411 (3 & 11),
ASTM D 1186, ASTM D 7091 ASTM D 1186, ASTM D 7091 ISO 2360, ASTM D 1400 BS 3900-C5, ASTM B 499, BS 3900-C5, ASTM B 499,
ISO 2360, ASTM D 1400, ISO 2360, ASTM D 1400,
ASTM D 1186, ASTM D 7091 ASTM D 1186, ASTM D 7091
Measuring Range 0 – 2000 µm 0 – 5000 µm 0 – 2000 µm Fe: 0 – 2000 µm Fe: 0 – 5000 µm,
NFe: 0 – 2000 µm NFe: 0 – 2000 µm
Measuring Interval 1500 ms 1500 ms 1500 ms 1500 ms 1500 ms
Measuring Accuracy ± (1 µm + 2% of the ± (1 µm + 2% of the ± (1 µm + 2% of the ± (1 µm + 2% of the ± (1 µm + 2% of the
Regarding Automation- reading) reading) in the range reading) reading) reading) in the range
Standards of 0.0 to 2.0 mm of 0.0 to 2.0 mm
± 3.5 % of the reading ± 3.5 % of the reading
from 2.0 mm from 2.0 mm
Minimum Measuring 20 x 20 20 x 20 20 x 20 20 x 20 20 x 20
Surface (mm x mm)
Minimum Radius Convex: 5 mm, Convex: 5 mm, Convex: 5 mm, Convex: 5 mm, Convex: 5 mm,
of Curvature Concave: 30 mm Concave: 30 mm Concave: 30 mm Concave: 30 mm Concave: 30 mm
Minimum Thickness 0.2 mm 0.2 mm 0.05 mm Fe: 0.2 mm, Fe: 0.2 mm,
of Base Material NFe: 0.05 mm NFe: 0.05 mm
Wireless Interface No No No No No
Operation Temperature 0 to 50 °C 0 to 50 °C 0 to 50 °C 0 to 50 °C 0 to 50 °C
Storage Temperature -10 to 60 °C -10 to 60 °C -10 to 60 °C -10 to 60 °C -10 to 60 °C
Power Supply From gauge From gauge From gauge From gauge From gauge
Dimensions 60 x 26 x 22 60 x 26 x 22 60 x 26 x 22 60 x 26 x 22 60 x 26 x 22
(L x W x H in mm) without extensions without extensions without extensions without extensions without extensions
Weight incl. Batteries ca. 12 g ca. 12 g ca. 12 g ca. 12 g ca. 12 g
Wireless Probes QNix® sat 8500 measuring probe MI Fe 500 µm 8500 dew point probe
ISN Frequency Band 2.4 GHz Measuring Method Magnetic measuring method Ambient Temperature (Ta)
Radio Transmission Range Max. 20 m Fe: magnetic induction Measuring Range 0 °C to +50 °C
See (*Fe) Accuracy ± 0.5 °C
Power Supply Lithium-Ion accumulator, Resolution 0.1 °C
chargeable via According to Standards DIN EN ISO 2808,
QNix® 8500 gauge DIN 50981, ISO 2178, Surface Temperature (Ts)
BS 5411 (11), BS 3900 – C5, Measuring Range -10° to +100 °C
Accumulator Capacity Max. 4000 measurements ASTM B499, ASTM D 1186, Accuracy ± 0.5 °C
Charging Time approx. 5 hours ASTM D 7091 Resolution 0.1 °C
Dimensions 61 x 28 x 28 mm Measuring Range Fe 0.0 – 500 µm Rel. Humidity (RH)
Weight ca. 30 g Measuring Interval 1600 ms Measuring Range 0 to 100% RH
Accuracy ± 2% between 10 – 90%
Repeatability Regarding ± (0.1 µm + 0,8% of the Resolution 0.1%
Automation Standads reading)
Magnetic Holder Accessory
Accuracy Regarding ± (0.3 µm + 2% of the
Automation Standards reading) after calibration Analysis with Software Yes
At the same time, the QNix® software provides the base of customized
applications to effectively support your quality assurance system.
Germany:
GmbH & Co. KG
Robert-Perthel-Strasse 2 · 50739 Köln
Phone +49 (0) 221-917455-0
Fax +49 (0) 221-171221
E-Mail info@automation.de
www.automation.de