Vous êtes sur la page 1sur 7

QUIZ2_CCNP2_V5.

0 Sida 1 av 7

1 In which data over ADSL architecture is the user PC required to run client software?
PPPoA
PPPoE
CAP
RFC 1483/2684

2 Which ADSL standard is supported by ANSI and ITU?


CAP
DMT
FDM
QAM

3 When the CPE is configured as the PPPoE or PPPoA client, which two interfaces can support the configuration? (Choose two.)
VDSL interface
ATM interface
DDR interface
PVC interface
Ethernet interface

4 What are four major components of a cable system? (Choose four.)


set-top box
antenna site
transportation network
grounding and attachment hardware
headend
distribution network

5 What does the command ip nat inside source list 101 interface Dialer 0 overload accomplish?
All internal addresses matching ACL 101 will be translated into the single IP address that is configured on the Dialer 0 interface.
All external addresses matching ACL 101 will be translated into the single IP address that is configured on the Dialer 0 interface.
All internal addresses matching ACL 101 will be translated into their own unique external address as provided by the Dialer 0
interface.
All external addresses matching ACL 101 will be translated into their own unique external address as provided by the Dialer 0
interface.

Create PDF files without this message


mhtml:file://D:\Mina by purchasing
dokument\NIT novaPDF
-09\CCNP 2 - printer (http://www.novapdf.com)
WAN\QUIZ2_CCNP2_V5.0.mht 2011-05-26
QUIZ2_CCNP2_V5.0 Sida 2 av 7

Refer to the exhibit. What is the purpose of the ip mtu 1492 command that is applied to interface Dialer0 of router RTA?
When a dialer interface is being used, the MTU must be reduced 8 bytes.
When an ATM pvc is used, the MTU must be reduced 8 bytes.
The aggregation router requires a reduced MTU across the ATM PVC.
The ISP router only accepts IP packets sized from 1492 bytes to 46 bytes.
The MTU is reduced to accommodate the PPPoE header.
When the internal interface is configured by the ip tcp adjust-mss 1452 command, the outside interface must be configured with
the ip mtu 1492 command.

A network administrator has partially set up the serial interfaces on the company router which connected to the ISP with an ADSL link.
The ISP is running DHCP services to customers. Which command is used to assign an IP address to ethernet1?
ip address dhcp
no ip address
ip address dynamic
ip address negotiated

8 At which step in the cable modem initiation process does negotiation of QoS take place?
during power up
during the time the modem reads specific messages in the downstream path
during the time the modem communicates with the CMTS to establish Layer 1 and Layer 2 communications

Create PDF files without this message


mhtml:file://D:\Mina by purchasing
dokument\NIT novaPDF
-09\CCNP 2 - printer (http://www.novapdf.com)
WAN\QUIZ2_CCNP2_V5.0.mht 2011-05-26
QUIZ2_CCNP2_V5.0 Sida 3 av 7

during the time the modem registers with the CMTS

9 Which of the following is a characteristic of ADSL?


It is designed to deliver more bandwidth downstream than upstream.
It is designed to deliver more bandwidth upstream than downstream.
The upstream rates range from 1.5 to 9 Mbps.
The downstream rates range from 16 to 640 Kbps.

10

Refer to the exhibit. From router RTA, where is the other end point for the PVC that is established on interface ATM 0/0 and uses VPI
8 and VCI 35?
DSLAM
aggregation router
ISP router
VPI 8 - termination at the DSLAM, VCI 35 -termination at the aggregation router
VPI 8 - termination at the aggregation router, VCI 35 - termination at the DSLAM
no termination for PVC 8/35. It is a virtual path/virtual circuit.
11

Create PDF files without this message


mhtml:file://D:\Mina by purchasing
dokument\NIT novaPDF
-09\CCNP 2 - printer (http://www.novapdf.com)
WAN\QUIZ2_CCNP2_V5.0.mht 2011-05-26
QUIZ2_CCNP2_V5.0 Sida 4 av 7

Refer to the exhibit. Which statement is true about the interface command encapsulation aal5mux ppp dialer?
It specifies the Layer 3 encapsulation.
It specifies the Layer 2 encapsulation.
It instructs the router to use PPP encapsulation.
It binds the Dialer0 interface to the ATM interface.
It ensures that pool aal5mux will use interface ATM 0/0.
It configures PVC 8/35 with PPP authentication.

12 What are two characteristics of DSL? (Choose two.)


uses fiber for local loop transmission
uses copper for local loop transmission
uses Layer 2 technology
uses Layer 1 technology

13 Which data over ADSL is a routed solution?


PPPoE
PPPoA
CAP
RFC 1483

14 When configuring a CPE router acting as the PPPoE client, what is the next step after enabling PPPoE on the Ethernet interface?
Configure static NAT.
Configure the ADSL encapsulation.
Configure the ADSL interface with an ATM PVC.
Configure the dialer interface.
Configure the MTU size of 1496.
Configure the MTU size of 1508.

15

Create PDF files without this message


mhtml:file://D:\Mina by purchasing
dokument\NIT novaPDF
-09\CCNP 2 - printer (http://www.novapdf.com)
WAN\QUIZ2_CCNP2_V5.0.mht 2011-05-26
QUIZ2_CCNP2_V5.0 Sida 5 av 7

Refer to the exhibit. Why do DHCP clients in the customer network site not have connectivity?
Router RTA has an incorrect DHCP server configuration.
IP NAT is configured incorrectly on RTA.
RTA configuration does not allow the DHCP server connected to the aggregation router to properly assign IP addresses to the customer
network.
Configuration of interface dialer 0 is incorrect on RTA.
A default route that is pointing to a dialer interface will not function.
The ATM virtual circuit has not been configured on RTA.

16

Observe the exhibit. A network administrator issues a show command while troubleshooting a problem with a DSL connection from an
827 router to an ISP across a DSL link. While troubleshooting the connection to the ISP, which line number from the output indicates
that the 827 router is trained to the DSLAM?
2
3

Create PDF files without this message


mhtml:file://D:\Mina by purchasing
dokument\NIT novaPDF
-09\CCNP 2 - printer (http://www.novapdf.com)
WAN\QUIZ2_CCNP2_V5.0.mht 2011-05-26
QUIZ2_CCNP2_V5.0 Sida 6 av 7

7
10

17 Which standards or organizations are associated with cable broadband networks?(Choose three.)
NTSC
PAL
ANSI
SECAM
OSI

18 Which set of commands would correctly configure DHCP to use the 10.10.10.0/24 network pool?
RTA(config)# ip dhcp mypool
RTA(config-dhcp)# import all
RTA(config-dhcp)# network 10.10.10.0 0.0.0.255
RTA(config-dhcp)# default-router 10.10.10.1
RTA(config)# ip dhcp mypool
RTA(config-dhcp)# import all
RTA(config-dhcp)# network 10.10.10.0
RTA(config-dhcp)# default-router 10.10.10.1
RTA(config)# ip dhcp mypool
RTA(config-dhcp)# import all
RTA(config-dhcp)# network 10.10.0.0 255.255.0.0
RTA(config-dhcp)# default-router 10.10.10.1
RTA(config)# ip dhcp mypool
RTA(config-dhcp)# import all
RTA(config-dhcp)# network 10.10.0.0 0.0.255.255
RTA(config-dhcp)# default-router 10.10.10.1
RTA(config)# ip dhcp mypool
RTA(config-dhcp)# import all
RTA(config-dhcp)# network 10.10.10.0 255.255.255.0
RTA(config-dhcp)# default-router 10.10.10.1

19

Refer to the exhibit. The configuration has been applied on a router RTA. However, RTA is unable to establish a PPPoA connection.
On the basis of the provided information, what would correct this problem?
On interface ATM0/0, enter the command encapsulation aal5mux ppp dialer.
On interface ATM0/0, enter the command ip address negotiated.
On interface Dialer0, enter the command encapsulation aal5mux ppp dialer.
On interface Dialer0, enter the command ip address negotiated.
On PVC 8/35, enter the command encapsulation aal5mux ppp dialer.

Create PDF files without this message


mhtml:file://D:\Mina by purchasing
dokument\NIT novaPDF
-09\CCNP 2 - printer (http://www.novapdf.com)
WAN\QUIZ2_CCNP2_V5.0.mht 2011-05-26
QUIZ2_CCNP2_V5.0 Sida 7 av 7

On PVC 8/35, enter the command ip address negotiated.

20 When configuring a PPPoE DSL interface, what should the MTU size be set to?
1492
1496
1504
1508
1512

Create PDF files without this message


mhtml:file://D:\Mina by purchasing
dokument\NIT novaPDF
-09\CCNP 2 - printer (http://www.novapdf.com)
WAN\QUIZ2_CCNP2_V5.0.mht 2011-05-26

Vous aimerez peut-être aussi