Académique Documents
Professionnel Documents
Culture Documents
c c
c c
Ans: D
Ans: C
Ans: A
6. With IRQ signal from an external interrupt device microprocessor
A. Temporarily stops current C. Resumes the interrupted
sequence of execution after execution after the
completing the current completion of ISR
instruction D. Do (A), (B) and (C) of the
B. Executes corresponding above in sequence
Interrupt Service Routine
Ans: D
.
7. The responsibilities of a typical Embedded systems software Engineer must include
Ans: D
13.The I/O transfer technique which involves highest hardware complexity and lowest
CPU overhead is
15.In an instruction execution cycle CPU checks for the interrupt when
Ans: A
A. RETURN C. POP
B. PUSH D. RST
Ans: A
20.The time taken by the system to respond to external interrupt is:
A. Interrupt latency C. Interrupt sequence
B. Interrupt priority D. Interrupt context
Ans: A
23.Interrupts, shared data, priorities and deadlines are applicable to:
A. RTOS C. Round-robin
B. Function-queue-scheduling D. Round-robin with interrupts
E.
Ans: A
Ans: D
25.Which of the following features is NOT applicable to an embedded RTOS?
A. Program Interface C. File system manipulation
B. I/O operations D. All of the above
Ans: C
Ans: C
28.The switch-over from kernel space to user space is done by means of
A. A hardware interrupt C. A software trap
B. A Mutex D. A semaphore
Ans: C
30.The most appropriate tool when considering Embedded System Software
development is
A. Native Compiler C. Native Assembler
B. Cross-Compiler D. None of the above
Ans: B
Ans: A
Ans: D
38.Blocking of a high priority task due to a shared resource while a low priority task is
running is
A. Priority sharing C. Priority inheritance
B. Priority conversion D. Priority inversion
Ans: D
Ans: A
51.Identify the feature which is not applicable to Digital Signal Processor
A. Low computational power C. Very Large Instruction Word
and high communication capability
capability D. Single Instruction Multiple
B. Multiply Add Accumulate Data
Units
Ans: A