Académique Documents
Professionnel Documents
Culture Documents
diode module :
cross generating optics
datasheet
K ey features
Wavelength 635nm
Output powers from 0.9mW to 4mW
70° full fan angle cross generating optics
Scratch-resistant sapphire window protects
lens
Appl i c at i o n s
Industrial alignment
Industrial positioning
H e a v y D u t y I n d u s t r i a l L a s e r D i od e M o d u l e
Designed and constructed to withstand the A range of industrial type connectors, a scratch-
harshest conditions and satisfy rigorous resistant sapphire window to protect the lens
industrial applications whilst remaining and a hard-coat anodised case all add up to
economically priced, this range of robust laser a rugged and reliable laser module that won’t
modules offers a very high level of performance. let you down when the going gets tough.
This industrial laser module is available with a Electrical connections are made via a 2.5mm
lasing wavelength of 635nm and optical output DC jack or industrial screw-on connector.
powers from 0.9mW to 4mW. The industrial range of laser diode modules
They generate an accurate 70° full angle cross has been designed as a complete laser diode
with Gaussian intensity, offering straight line solution for heavy duty OEM use.
precision without bowing.
The beam is aligned to <0.25o of the mechanical
axis of the laser.
Full Fan Angle Cross 1/2 Angle Beam Divergence Connector Type
70o 0.4 mrad typ 2.5mm DC Jack
Part Number Wavelength (nm) Power (mW) Max. Operating Current (mA)
300-2237-01 635 0.9 45
300-2236-01 635 4.0 50
Accessories
300-0399-00 2 Metre Industrial Power Lead
Warranty 1 Year
L a se r Sa f e t y
The light emitted from these devices has been set in accordance with IEC60825. However, staring into the beam, whether directly or
indirectly, must be avoided. IEC60825 classifies laser products into three different categories depending on light emitted, wavelength
and eye safety.
C LA S S I I
“Caution”, visible laser light less than 1.0mW. Considered eye safe, normal exposure to this type of beam will not cause permanent
damage to the retina.
C LA S S I I I R
“Danger”, visible laser light between 1.0mW and 5.0mW. Considered eye safe with caution. Focusing of this light into the eye could
cause some damage.
C LA S S I I I B
“Danger”, infrared (IR), and high power visible lasers considered dangerous to the retina if exposed.
NB: It is important to note that while complying with the above classifications, unless otherwise stated, our laser diode products are not
certified and are designed solely for use in OEM products. The way in which the device is used in the final product may alter its original
design classification, and it is the responsibility of the OEM to ensure compliance with the relevant standards.
Heat Sinking
If the case temperature of the laser diode exceeds its maximum specification, premature or catastrophic failure may occur.
To ensure the maximum life of the laser diode, it is recommended that an additional electrically insulated heatsink, of at least 35 sq.cm.
be used. Thermal transfer cream can be used to improve contact and heat dissipation. Do not restrict air circulation around the device.
Power Connections
The industrial laser diode modules require a regulated input voltage of 5V DC.
WARNING: The anodised housing is internally connected to the positive supply rail. Damage to the external anodised surfaces will
result in the housing being at positive potential.
Specifications subject to change without notice. E&OE