Académique Documents
Professionnel Documents
Culture Documents
12-P-1100AK ENGINE
5.5.04
P15.12-2076-09
Shown on model 169.0 1 Intake manifold support 2 Bolts 3 Bolts 4 Bracket 5 Bolt 6 Bolts
7 8 9 10 11
Electrical connector Electrical connector Ignition cable Ignition cable Brake booster vacuum line
T1/1 T1/2
ed a Danger!
Remove/install Risk of death caused by contact with parts conducting high voltages. Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry work out on the ignition system AS15.10-Z-0001-01A
p 1 2 3 4 5 6
Notes on avoiding damage to ignition system Disconnect brake booster vacuum line (11) on intake manifold Remove air filter housing Unscrew bolts (2, 3) and remove intake manifold support Unscrew bolt (5) and remove bracket (4) Remove electrical connector (7) and electrical connector (8) Remove ignition cables (9, 10) from the ignition i Installation: Secure the ignition cable (9) coil for cylinders 1+2 (T1/1) and the ignition coil for cylinders 1 and 3 to the cylinder head cover, for cylinders 3+4 (T1/2) position "a" (arrow), and plug into connection "a" of the ignition coil for cylinders 1+2 (T1/1) and the ignition coil for cylinders 3+4 (T1/2). Secure the ignition cable (10) for cylinders 2 and 4 at the cylinder head cover, position "b" (arrow), and plug into connection "b" of the ignition coil for cylinders 1+2 (T1/1) and the ignition coil for cylinders 3+4 (T1/2). Unscrew bolts (6) and remove the ignition coil n for cylinders 1+2 (T1/1) and the ignition coil for cylinders 3+4 (T1/2) n Install in the reverse order n
AH15.10-P-0002-01AK
AR09.10-P-1050AK *BA09.20-P-1004-01O
*BA15.10-P-1002-01F
*BA15.10-P-1003-01F
Copyright DaimlerChrysler AG 10.06.2011 CD-Ausgabe G/09/05 . This WIS print-out will not be recorded by Modification services.
Page 1
n Intake manifold, intake manifold preheater Number Designation Engine 266.920/ 940/960
BA09.20-P-1004-01O
Nm
10
BA15.10-P-1002-01F
Bolt of ignition coil to cylinder head cover (sand casting) Bolt of ignition coil to cylinder head cover (die-casting)
Nm
BA15.10-P-1003-01F
Nm
14
Copyright DaimlerChrysler AG 10.06.2011 CD-Ausgabe G/09/05 . This WIS print-out will not be recorded by Modification services.
Page 2