Vous êtes sur la page 1sur 98

XCAP-LTE Lte Parameter Description

Edition: 04 Version: 4.108.xx 2011. 01.

2011 Accuver., Ltd., All rights reserved. This documentation shall not be changed, distributed to the public, and opened to the third person without written approval. Accuver is not responsible for any direct or indirect damages arisen or related to use of this manual. All information included herein may be changed without prior notice.

Accuver APAC Limited Unit 206, 2/F., No. 8 Science Park West Avenue Hong Kong Science Park, Shatin New Territories, Hong Kong TEL: +852 2210 7004 FAX: +852 2210 7017 Web: http://www.accuver.com Email: sales@accuver.com

Introduction

Introduction of Appendix
This Analyzer Parameter Description manual specifies asynchronous parameters in Parameter Trees in Analyzer graph/map/table/CDF/PDF.

History
Edition 00 01 02 Date 2009.10 2010.10 2010.10 Draft version (LGE) 2 version (LGE) 3 version (Samsung) 4 version 03 2011.01 1) Qualcomm 2) Samsung LPHY N Cell Information Structure Enhancement) 04 2011.01 5 version (GCT)
th th rd nd

Description

Copyright by Accuver Ltd.

Page I

Contents
Introduction of Appendix .............................................................................. I History ................................................................................................... I

Parameter Description .......................................................................... 1


LGE ..................................................................................................... 1 L1 Status Info ................................................................................... 1 Serving Cell Signal Quality Info .............................................................. 2 Tx Power Info ................................................................................... 2 RACH Info ....................................................................................... 2 Timing Adjustment Info ........................................................................ 3 Cell Info .......................................................................................... 3 Search Result ................................................................................... 6 Channel Info .................................................................................... 7 CQI Info.......................................................................................... 7 Multi-paths Profile .............................................................................. 8 PBCH BLER .................................................................................... 8 PDSCH BLER .................................................................................. 9 PDCCH Detection Rate ....................................................................... 9 DL Grant & UL Ack/Nack Status Info(Improved) ............................................ 9 DL Grant & UL Ack/Nack Status Info(Improved)[Detail per TTI] ........................ 11 UL Grant & DL Ack/Nack Status Info ....................................................... 12 UL Grant & DL Ack/Nack Status info[Detail per TTI] ..................................... 13 PDSCH PHY Throughput ................................................................... 14 UL PRB MAP Data Info ...................................................................... 14 PUSCH PHY Throughput ................................................................... 14 L2 DL Throughput ............................................................................ 15 L2 UL Throughput ............................................................................ 15 PDSCH MAC BLER .......................................................................... 16 RLC States Info ............................................................................... 16 MAC State Info ............................................................................... 17 MAC UL Transmission Info .................................................................. 17 RACH REQ Info .............................................................................. 18 RACH RSP General Info .................................................................... 18 RNTI Info ...................................................................................... 19

Copyright by Accuver Ltd.

Page I

XCAP-LTE Analyzer Parameter Description/Ed.04

Serving Cell & Neighbor Cell Lists ......................................................... 19 NAS System Info ............................................................................. 21 RRC BCH Status Info ........................................................................ 22 NAS State Info ................................................................................ 22 NAS State Info(R4) ........................................................................... 22 Radio & NAS Signaling Failure Info ........................................................ 23 RRC Freq Scan Info ......................................................................... 23 Cell Reselection Info ......................................................................... 23 Handover History ............................................................................. 23 Data Path Packet Loss ...................................................................... 24 ESM Instance Info ............................................................................ 24 Samsung ............................................................................................... 26 Common Basic Info .......................................................................... 26 Common Data Info ........................................................................... 26 LTE N Cell Information....................................................................... 27 LPHY Cell Search Info ....................................................................... 28 LPHY System Info ............................................................................ 29 LPHY Channel Quality Info ................................................................. 30 LPHY Parameter Info ........................................................................ 30 LPHY PHICH Info ............................................................................ 31 LL1 RF & Sync Info .......................................................................... 31 LL1 Downlink Info ............................................................................ 32 LL1 Uplink Info ................................................................................ 32 LL1 Measurement Config Info .............................................................. 32 LL2 SCH Configuration Info ................................................................. 33 Timer & Preamble Info ....................................................................... 33 Power Ramping & RA Supervision Info.................................................... 33 Max HARQ Msg3Tx & RACH Info ......................................................... 34 LL2 RNTI Info ................................................................................. 34 LL2 RLC Info .................................................................................. 34 LL2 PDCP Info ................................................................................ 35 LRRC Serving Cell Info ...................................................................... 36 LRRC State Variables Info .................................................................. 36 LRRC Timer info .............................................................................. 37 LNAS State Variables Info ................................................................... 37 LNAS MM(SIM/PLMN/Security) Info ....................................................... 38

Page II

Copyright by Accuver Ltd.

XCAP-LTE Analyzer Parameter Description/Ed.04

LNAS PDP/IP Info ............................................................................ 39 LDATA Throughput Info ...................................................................... 39 LDATA Timing Info............................................................................ 39 Qualcomm ............................................................................................. 40 Configuration Info ............................................................................ 40 Power Info ..................................................................................... 50 Cell Search .................................................................................... 50 Ant Correlation Result ....................................................................... 51 Intrafreq Measurement Info ................................................................. 51 Channel Quality Info ......................................................................... 53 ML1 Downlink Info ........................................................................... 54 ML1 Uplink Info ............................................................................... 55 Random Access Procedure ................................................................. 55 Radio Link Monitoring Info .................................................................. 59 NAS ESM Bearer Context Info ............................................................. 59 NAS EMM State .............................................................................. 60 RRC Serving Cell Info ....................................................................... 61 RRC PLMN Search Info ..................................................................... 62 ML1 Serving Cell Info(Acquisition) ......................................................... 63 Physical Throughput ......................................................................... 63 MAC Throughput ............................................................................. 64 RLC Throughput .............................................................................. 64 PDCP Throughput ............................................................................ 64 GCT .................................................................................................... 66 L1 Status Info ................................................................................. 66 Serving Cell Signal Quality Info ............................................................ 67 Tx Power Info ................................................................................. 67 RACH Info ..................................................................................... 67 Timing Adjustment Info ...................................................................... 67 Cell Info ........................................................................................ 68 Search Result ................................................................................. 71 Channel Info .................................................................................. 71 CQI Info........................................................................................ 72 Multi-paths Profile ............................................................................ 73 PBCH BLER .................................................................................. 73 PDSCH BLER ................................................................................ 73

Copyright by Accuver Ltd.

Page III

XCAP-LTE Analyzer Parameter Description/Ed.04

PDCCH Detection Rate ..................................................................... 74 DL Grant & UL Ack/Nack Status Info(Improved) .......................................... 74 DL Grant & UL Ack/Nack Status Info(Improved)[Detail per TTI] ........................ 76 UL Grant & DL Ack/Nack Status Info ....................................................... 77 UL Grant & DL Ack/Nack Status info[Detail per TTI] ..................................... 78 PDSCH PHY Throughput ................................................................... 78 UL PRB MAP Data Info ...................................................................... 79 PUSCH PHY Throughput ................................................................... 79 L2 DL Throughput ............................................................................ 79 L2 UL Throughput ............................................................................ 80 PDSCH MAC BLER .......................................................................... 80 RLC States Info ............................................................................... 81 MAC State Info ............................................................................... 81 MAC UL Transmission Info .................................................................. 81 RACH REQ Info .............................................................................. 83 RACH RSP General Info .................................................................... 83 RNTI Info ...................................................................................... 83 Serving Cell & Neighbor Cell Lists ......................................................... 84 NAS System Info ............................................................................. 86 RRC BCH Status Info ........................................................................ 86 NAS State Info ................................................................................ 87 NAS State Info(R4) ........................................................................... 87 Radio & NAS Signaling Failure Info ........................................................ 87 RRC Freq Scan Info ......................................................................... 87 Cell Reselection Info ......................................................................... 88 Handover History ............................................................................. 88 Data Path Packet Loss ...................................................................... 88 ESM Instance Info ............................................................................ 89

Page IV

Copyright by Accuver Ltd.

Parameter Description

LGE
L1 Status Info
L1 status information shows physical layer status such as channel setup status, serving cell information, PCH DRX and measurement periodicity, etc. Parameter State Info> Main State Physical layer main state 0: DEACTIVATED 1: IDLE 2: CONNECTED State Info> BCH BCH Channel State 0: RELEASE 1: SETUP State Info> PCH PCH Channel State 0: RELEASE 1: SETUP State Info> DL-SCH for BCCH State Info> UL/DL-SCH and RACH Serving Cell Info> PCI Serving Cell Info> DL Freq Serving Cell Info> UL Freq Serving Cell Info> DL Bandwidth Serving Cell Info> UL Bandwidth Serving Cell Info> Antenna Num DL-SCH for BCCH Channel State 0: RELEASE 1: SETUP UL/DL-SCH and RACH Channel State 0: RELEASE 1: SETUP Cell identifier Downlink frequency Uplink frequency Downlink bandwidth (Unit : RB) Uplink bandwidth (Unit : RB) Number of downlink transmit antenna Description

PCH DRX Period

PCH DRX periodicity 0: 0.32sec 1: 0.64sec 2: 1.28sec 3: 2.56sec 255: OFF

Serving Cell Signal Quality Info


The serving cell quality information shows SNR of reference signal (RS SNR) and received power of reference signal (RS RSSI). Parameter RS RSSI 0 RS RSSI 1 RS RSSI RS SNR Description received power 0 of reference signal received power 1 of reference signal total received power of reference signal (rs_rssi[0] + rs_rssi[1])/2 reference signal power and noise power for a resource element containing RS are estimated. 10*log10{ (signal_pwr[0] + signal_pwr [1])/ (noise_pwr[0] + noise_pwr [1])})

Tx Power Info
Time sync report log shows the time sync status of UE. Parameter PUCCH Tx Power PUSCH Tx Power PRACH Tx Power Total Tx Power Description PUSCH average UE output power in dBm PUCCH average UE output power in dBm PRACH instantaneous UE output power in dBm 1 frame based average UE output power in dBm

RACH Info
Parameter Frame Num TTI Preamble Format Speed Mode Root Seq Cyclic Shift Zero Correlation Zone Retrans Num Tx Power Start frame number Start subframe number 0: Format 0, 1: Format 1, 2: Format2, 3: Format3 0: normal speed, 1: high speed Root Sequence Cyclic Shift per Use Zero Correlation Zone (Ncs value 59) Retransmit number RACH transmit power Description

XCAP-LTE Analyzer Parameter Description/Ed.04

Timing Adjustment Info


Tx Timing adjustment log shows the TA position. Parameter Rx SFN Rx TTI NTA Received frame number Received subframe number Timing advance command In case of random access response : 11bit for NTA In other case : 6bit for NTA (TA = 0, 1, 2,..., 63) Accum TA Accumulate timing advance command Description

Cell Info
Cell Information display cell lists which are collected from Mp Searcher and Cell Searcher. Parameter INTRA>SYNC> RSRP INTRA>SYNC> RSRQ INTRA>SYNC> RSSI INTRA>SYNC> FrameBound INTRA>SYNC> CPLength Description Reference Signal Received Power of Intra cell which is known the sync position. Reference Signal Received Quality of Intra cell which is known the sync position Received Power of Intra cell which is known the sync position Cell frame boundary in Intra Sync CP length in Intra Sync 0: Unknown 1 : Normal CP 2 : Extended CP INTRA>SYNC> DL Earfcn INTRA>SYNC> Top Set Earfcn number in Intra Sync PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn INTRA>ASYNC> RSRP INTRA> ASYNC> RSRQ INTRA> ASYNC> RSSI INTRA> ASYNC> FrameBound PCI with RSRP strength from top 1 to 20 from Intra Sync Cell Top 1 to 20 RSRP from Intra Sync Cell Top 1 to 20 RSRQ from Intra Sync Cell Top 1 to 20 RSSI from Intra Sync Cell Top 1 to 20 FrameBound from Intra Sync Cell Top 1 to 20 CPLength from Intra Sync Cell Top 1 to 20 DL Earfcn from Intra Sync Cell

Reference Signal Received Power of Intra cell which is unknown the sync position. Reference Signal Received Quality of Intra cell which is unknown the sync position Received Power of Intra cell which is unknown the sync position Cell frame boundary in Intra Async

Copyright by Accuver Ltd.

Page 3

INTRA> ASYNC> CPLength

CP length in Intra Async 0: Unknown 1 : Normal CP 2 : Extended CP

INTRA> ASYNC> DL Earfcn INTRA> ASYNC > Top Set

Earfcn number in Intra Async PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn PCI with RSRP strength from top 1 to 20 from Intra Async Cell Top 1 to 20 RSRP from Intra Async Cell Top 1 to 20 RSRQ from Intra Async Cell Top 1 to 20 RSSI from Intra Async Cell Top 1 to 20 FrameBound from Intra Async Cell Top 1 to 20 CPLength from Intra Async Cell Top 1 to 20 DL Earfcn from Intra Async Cell

INTRA>DETECT> RSRP INTRA> DETECT> RSRQ INTRA> ASYNC> RSSI INTRA> DETECT> FrameBound INTRA> DETECT> CPLength

Reference Signal Received Power of Intra cell which is newly detected at this search. Reference Signal Received Quality of Intra cell which is newly detected at this search Received Power of Intra cell which is newly detected at this search Cell frame boundary in Intra Detected CP length in Intra Detected 0: Unknown 1 : Normal CP 2 : Extended CP

INTRA> DETECT> DL Earfcn INTRA> DETECT > Top Set

Earfcn number in Intra Detected PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn PCI with RSRP strength from top 1 to 20 from Intra Detect Cell Top 1 to 20 RSRP from Intra Detect Cell Top 1 to 20 RSRQ from Intra Detect Cell Top 1 to 20 RSSI from Intra Detect Cell Top 1 to 20 FrameBound from Intra Detect Cell Top 1 to 20 CPLength from Intra Detect Cell Top 1 to 20 DL Earfcn from Intra Detect Cell

INTER>SYNC> RSRP INTER>SYNC> RSRQ INTER>SYNC> RSSI INTER>SYNC> FrameBound

Reference Signal Received Power of Inter cell which is known the sync position. Reference Signal Received Quality of Inter cell which is known the sync position Received Power of Inter cell which is known the sync position Cell frame boundary in Inter Sync

XCAP-LTE Analyzer Parameter Description/Ed.04

INTER>SYNC> CPLength

CP length in Inter Sync 0: Unknown 1 : Normal CP 2 : Extended CP

INTER>SYNC> DL Earfcn INTER >SYNC> Top Set

Earfcn number in Inter Sync PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn PCI with RSRP strength from top 1 to 20 from Inter Sync Cell Top 1 to 20 RSRP from Inter Sync Cell Top 1 to 20 RSRQ from Inter Sync Cell Top 1 to 20 RSSI from Inter Sync Cell Top 1 to 20 FrameBound from Inter Sync Cell Top 1 to 20 CPLength from Inter Sync Cell Top 1 to 20 DL Earfcn from Inter Sync Cell

INTER>ASYNC> RSRP INTER> ASYNC> RSRQ INTER> ASYNC> RSSI INTER> ASYNC> FrameBound INTER> ASYNC> CPLength

Reference Signal Received Power of Inter cell which is unknown the sync position. Reference Signal Received Quality of Inter cell which is unknown the sync position Received Power of Inter cell which is unknown the sync position Cell frame boundary in Inter Async CP length in Inter Async 0: Unknown 1 : Normal CP 2 : Extended CP

INTER> ASYNC> DL Earfcn INTER > ASYNC > Top Set

Earfcn number in Inter Async PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn PCI with RSRP strength from top 1 to 20 from Inter Async Cell Top 1 to 20 RSRP from Inter Async Cell Top 1 to 20 RSRQ from Inter Async Cell Top 1 to 20 RSSI from Inter Async Cell Top 1 to 20 FrameBound from Inter Async Cell Top 1 to 20 CPLength from Inter Async Cell Top 1 to 20 DL Earfcn from Inter Async Cell

INTER>DETECT> RSRP INTER> DETECT> RSRQ INTER> ASYNC> RSSI INTER> DETECT> FrameBound

Reference Signal Received Power of Inter cell which is newly detected at this search. Reference Signal Received Quality of Inter cell which is newly detected at this search Received Power of Inter cell which is newly detected at this search Cell frame boundary in Inter Detected

Copyright by Accuver Ltd.

Page 5

INTER> DETECT> CPLength

CP length in Inter Detected 0: Unknown 1 : Normal CP 2 : Extended CP

INTER> DETECT> DL Earfcn INTER > DETECT > Top Set

Earfcn number in Inter Detected PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn PCI with RSRP strength from top 1 to 20 from Inter Detect Cell Top 1 to 20 RSRP from Inter Detect Cell Top 1 to 20 RSRQ from Inter Detect Cell Top 1 to 20 RSSI from Inter Detect Cell Top 1 to 20 FrameBound from Inter Detect Cell Top 1 to 20 CPLength from Inter Detect Cell Top 1 to 20 DL Earfcn from Inter Detect Cell

All Set Top Set

All Cell RSRP/RSRQ/RSSI/FrameBound /CPLength/DL Earfcn/Cell State per PCI PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn PCI with RSRP strength from top 1 to 20 from All Cell Top 1 to 20 RSRP from All Cell Top 1 to 20 RSRQ from All Cell Top 1 to 20 RSSI from All Cell Top 1 to 20 FrameBound from All Cell Top 1 to 20 CPLength from All Cell Top 1 to 20 DL Earfcn from All Cell Top 1 to 20 Cell State from All Cell - Intra Sync - Intra Async Cell State - Intra Detect - Inter Sync - Inter Async - Inter Detect

Search Result
Search Result log shows Mp Search result and Cell Search result. Parameter MP Searcher Cell Searcher> Dominant PCI Cell Searcher> Dominant Cell Srch Energy Dominant Cell Search Energy Description Mp Searcher Dominant Energy and Mp Searcher position per PCIS (PCIS: 0,1 or 2) PCI with Dominant Cell Search Energy

XCAP-LTE Analyzer Parameter Description/Ed.04

Cell Searcher> PCI# Earfcn Used Cell Searcher Num

Cell Search Energy, PCIG, Half Frame Idx and CP Length per PCI (PCIG: 0 ~ 167, PCI: 0 ~ 503) EARFCN number Num of Used Cell Searcher

Channel Info
The channel information shows no antenna in the 2x2 MIMO channel. Parameter Tx Correlation> Freq Total Band(Avg) Tx Correlation> Freq Sub Band x Rx Correlation> Freq Total Band(Avg) Rx Correlation> Freq Sub Band x H00 (Real)> Freq Sub Band x H00 (Imaginary)> Freq Sub Band x H01 (Real)> Freq Sub Band x H01 (Imaginary)> Freq Sub Band x H10 (Real)> Freq Sub Band x H10 (Imaginary)> Freq Sub Band x H11 (Real)> Freq Sub Band x H11 (Imaginary)> Freq Sub Band x Description Tx Correlation in Total Band(Sub Band 1 ~ 30) Tx Correlation per Sub Band Rx Correlation in Total Band(Sub Band 1 ~ 30) Tx Correlation per Sub Band H00 (Real value) per Sub Band H00 (Imaginary value) per Sub Band H00 (Real value) per Sub Band H00 (Imaginary value) per Sub Band H00 (Real value) per Sub Band H00 (Imaginary value) per Sub Band H00 (Real value) per Sub Band H00 (Imaginary value) per Sub Band

CQI Info
The wideband CQI information shows measured CQI of wideband in the UE. The sub-band CQI information shows the CQI (channel quality information) of sub-bands. The sub-band is defined a unit for a group of resource elements used for reporting sub-band CQI. Parameter Rank Ratio> Instant Instant Rank Ratio (Range 0 ~ 1) Description

Copyright by Accuver Ltd.

Page 7

Rank Ratio> Cumulative CQI(Wideband)> Rank1 CQI CQI(Wideband)> Rank2 CW0 CQI CQI(Wideband)> Rank2 CW1 CQI CQI(Wideband)> Rank1 PMI CQI(Wideband)> Rank2 PMI CQI(Subband)> Rank1 CQI CQI(Subband)> Rank2 CW0 CQI CQI(Subband)> Rank2 CW1 CQI CQI(Subband)> Rank1 PMI CQI(Subband)> Rank2 PMI

Cumulative Rank Ratio (Range 0 ~ 1) Rank1 wide band CQI Rank2 wide band CQI for CW0 Rank2 wide band CQI for CW1 Rank1 wide band PMI Rank2 wide band PMI Rank1 sub band CQI Rank2 sub band CQI for CW0 Rank2 sub band CQI for CW1 Rank1 sub band PMI Rank2 sub band PMI

Multi-paths Profile
This information shows the channel impulse response of reference signals in the time domain. Parameter Serving PCI Ref EsNo Serving cell ID (0~503) The reference EsNo is the detected RS SNR in the reference position. RS power metric of reference path. EsNo is calculated by computing 10*log10(RS power metric/noise power metric) Ref Timing Path Info[x]> EsNo Path Info[x]> Time Index The reference timing gives the information of reference cell timing of demodulation. Reference timing of serving cell. The resolution is Ts in a frame RS power metric of this path Timing offset from reference timing (Ts resolution) Description

PBCH BLER
PBCH BLER displays how much transport blocks get CRC_NOK about total received transport blocks. Parameter Instant Cumulative Instant PBCH BLER (bler_info.err_nums / bler_info.total_nums) * 100 Cumulative PBCH BLER Description

XCAP-LTE Analyzer Parameter Description/Ed.04

PDSCH BLER
PDSCH BLER displays how much transport blocks get CRC_NOK about total received transport blocks. Parameter Instant> All Instant PDSCH Total BLER ((bler_info[0].err_nums + bler_info[1].err_nums) / (bler_info[0].total_nums + bler_info[1].total_nums)) * 100 Instant> Codeword #0 Instant> Codeword #1 Cumulative> All Cumulative> Codeword #0 Cumulative> Codeword #1 Instant PDSCH Codeword0 BLER (bler_info[0].err_nums / bler_info[0].total_nums) * 100 Instant PDSCH Codeword1 BLER (bler_info[1].err_nums / bler_info[1].total_nums) * 100 Cumulative PDSCH Total BLER Cumulative PDSCH Codeword0 BLER Cumulative PDSCH Codeword1 BLER Description

PDCCH Detection Rate


UE cant calculate PDCCH BLER because UE doesnt know when eNode-B sends its PDCCH. In other words, UE detects PDCCH blindly. So, UE DM supports this item similar with PDCCH BLER. Parameter DCI 0 DCI 1 DCI 1a DCI 1b DCI 1c DCI 2 DCI 2a DCI 3 DCI 3a The number of detection for DCI#0 The number of detection for DCI 1 The number of detection for DCI 1a The number of detection for DCI 1b The number of detection for DCI 1c The number of detection for DCI 2 The number of detection for DCI 2a The number of detection for DCI 3 The number of detection for DCI 3a Description

DL Grant & UL Ack/Nack Status Info(Improved)


DL Grant & UL ACK/NACK Status(Improved) displays DL grant regardless any DCI format in every TTI. According to TS36.212, each DCI format has the specific fields, not all, and the unnecessary fields are displayed to the blank. Additionally, UL_ACK/NACK, CFI, and DCI_3/3A payload will be included in this item. Parameter SFN SFN value Description

Copyright by Accuver Ltd.

Page 9

TTI DCI Format> Count DCI Format> Rate TM Scheme

TTI value DCI 1 Num/ DCI 1A Num/ DCI 1B Num/ DCI 1C Num/ DCI 2 Num/ DCI 2A Num/ DCI 3 Num/ DCI 3A Num/ N/A Num DCI 1 Rate/ DCI 1A Rate/ DCI 1B Rate/ DCI 1C Rate/ DCI 2 Rate/ DCI 2A Rate/ DCI 3 Rate/ DCI 3A Rate/ N/A Rate transmission scheme 0:"SING-ANT(P0)",1:"SING-ANT(P5)",2:"TRANSDIV",3:"LARGE-CDD",4:"CLOSE-SM",5:"MU-MIMO"

TPC RB Num MCS> CW0> MCS(Idx) MCS> CW0> QPSK Rate MCS> CW0> 16 QAM Rate MCS> CW0> 64 QAM Rate MCS> CW1> MCS(Idx) MCS> CW1> QPSK Rate MCS> CW1> 16 QAM Rate MCS> CW1> 64 QAM Rate NDI> CW0> New Data Num NDI> CW0> Retrans Data Num NDI> CW0> New Data Rate NDI> CW1> New Data Num NDI> CW1> Retrans Data Num NDI> CW1> New Data Rate UL ACK/NACK> CW0> ACK Count UL ACK/NACK> CW0> NACK Count UL ACK/NACK> CW0> DTX Count

TPC Resource Block Number CW0 MCS CW0 QPSK Rate CW0 16 QAM Rate CW0 64 QAM Rate CW1 MCS CW1 QPSK Rate CW1 16 QAM Rate CW1 64 QAM Rate CW0 NDI (NDI field = 1) CW0 NDI (NDI field = 0) New Data Num/(Retrans Data Num+New Data Num)*100 in CW0 CW1 NDI (NDI field = 1) CW1 NDI (NDI field = 0) New Data Num/(Retrans Data Num+New Data Num)*100 in CW1 CW0 UL ACK result CW0 UL NACK result CW0 UL DTX result

XCAP-LTE Analyzer Parameter Description/Ed.04

UL ACK/NACK> CW0> ACK Rate UL ACK/NACK> CW0> NACK Rate UL ACK/NACK> CW0> DTX Rate UL ACK/NACK> CW1> ACK Count UL ACK/NACK> CW1> NACK Count UL ACK/NACK> CW1> DTX Count UL ACK/NACK> CW1> ACK Rate UL ACK/NACK> CW1> NACK Rate UL ACK/NACK> CW1> DTX Rate DCI 3(Mode)> DCI 3/3A Value(CW0) DCI 3(Mode)> DCI 3/3A Value(CW1)

ACK Count/(ACK Count+NACK Count+DTX Count)*100 in CW0 NACK Count/(ACK Count+NACK Count+DTX Count)*100 in CW0 DTX Count/(ACK Count+NACK Count+DTX Count)*100 in CW0 CW1 UL ACK result CW1 UL NACK result CW1 UL DTX result ACK Count/(ACK Count+NACK Count+DTX Count)*100 in CW1 NACK Count/(ACK Count+NACK Count+DTX Count)*100 in CW1 DTX Count/(ACK Count+NACK Count+DTX Count)*100 in CW1 CW0 DCI3/3A value CW1 DCI3/3A value

DL Grant & UL Ack/Nack Status Info(Improved)[Detail per TTI]


DL Grant & UL Ack/Nack Status Info(Improved)[Detail per TTI] displays the related information per TTI. Parameter SFN TTI CFI DCI Format SFN value TTI value CFI value DCI format 0:"DCI_1",1:"DCI_1A,2:"DCI_1B",3:"DCI_1C",4:"DCI_2", 5:"DCI_2A",6:"DCI_3",7:"DCI_3A" RNTI RNTI type 0:"C-RNTI",1:"RA-RNTI",2:"P-RNTI",3:"SI-RNTI", 4:"PUCCH",5:"PUSCH",6:"SPSRNTI",7:T-CRNTI TM Scheme transmission scheme 0:"SING-ANT(P0)",1:"SING-ANT(P5)",2:"TRANS- DIV",3:"LARGE-CDD",4:"CLOSESM",5:"MU-MIMO" Distribution Flag Gap Value RA Header distribution flag 0:"LOCAL", 1:"DIST" gap value RA header Description

Copyright by Accuver Ltd.

Page 11

Precoding RB Num PMI Confirmation TPC HARQ Number MCS(CW0) NDI(CW0) RV(CW0) MOD Type(CW0) New/Retrans Type(CW0) TB Size(CW0) CRC Result(CW0) UL ACK/NACK Result(CW0) DCI 3(CW0) MCS(CW1) NDI(CW1) RV(CW1) MOD Type(CW1) New/Retrans Type(CW1) TB Size(CW1) CRC Result(CW1) UL ACK/NACK Result(CW1) DCI 3(CW1)

precoding information Resource Block Number PMI confirmation TPC HARQ number MCS in CW0 NDI in CW0 redundancy version in CW0 modulation type in CW0 new or retransmission type in CW0 transport block size in CW0 CRC result in CW0 UL ACK/NACK result in CW0 DCI3/3A value in CW0 MCS in CW1 NDI in CW1 redundancy version in CW1 modulation type in CW1 new or retransmission type in CW1 transport block size in CW1 CRC result in CW1 UL ACK/NACK result in CW1 DCI3/3A value in CW1

UL Grant & DL Ack/Nack Status Info


UL Grant Info Status log shows get UL Scheduling Grant information to PDCCH. Parameter SFN TTI FH> FH Num FH> No FH Num FH> FH Rate MCS> CQI REQ> MCS(Idx) MCS> No CQI REQ> MCS(Idx) SFN value TTI value FH Number No FH Number FH Num/(No FH Num+FH Num)* 100 No CQI Request Modulation and Coding Rate CQI Request Modulation and Coding Rate Description

XCAP-LTE Analyzer Parameter Description/Ed.04

MCS> No CQI REQ> QPSK Rate MCS> No CQI REQ> 16 QAM Rate MCS> No CQI REQ> 64 QAM Rate New Data Num Retrans Data Num New Data Rate TPC CS DMRS DL ACK/NACK> ACK Count DL ACK/NACK> NACK Count DL ACK/NACK> DTX Count DL ACK/NACK> ACK Rate DL ACK/NACK> NACK Rate DL ACK/NACK> DTX Rate

QPSK Num/(QPSK Num+16QAM Num+64QAM Num)*100 in CQI Request 16QAM Num/(QPSK Num+16QAM Num+64QAM Num)*100 in CQI Request 64QAM Num/(QPSK Num+16QAM Num+64QAM Num)*100 in CQI Request New data indicator (NDI field = 1) New data indicator (NDI field = 0) New Data Num/(Retrans Data Num+New Data Num)*100 Power control of PUSCH Cyclic shift for DMRS DL ACK result DL NACK result DL DTX result ACK Count/(ACK Count+NACK Count+DTX Count)*100 NACK Count/(ACK Count+NACK Count+DTX Count)*100 DTX Count/(ACK Count+NACK Count+DTX Count)*100

UL Grant & DL Ack/Nack Status info[Detail per TTI]


UL Grant & DL Ack/Nack Status info[Detail per TTI] displays the related information per TTI. Parameter SFN TTI TB Size RB Assign FH MCS NDI TPC CS DMRS CQI Request Ind SFN value TTI value Transport Block size Resurce block assingment 0 :No FH 1 :FH Modulation and Coding Rate New data indicator Power control of PUSCH Cyclic shift for DMRS CQI Request Indication 0 : No CQI Request 1 : CQI Request Description

Copyright by Accuver Ltd.

Page 13

DL ACK/NACK Result

0 :NACK 1 :ACK

PDSCH PHY Throughput


PDSCH PHY Throughput has displays how much to get the downlink data in 1sec. Parameter All Codeword #0 Codeword #1 PDSCH PHY Total Throughput (cw_0 + cw_1) / 1000 PDSCH PHY Codeword0 Throughput (cw_0) / 1000 PDSCH PHY Codeword0 Throughput (cw_1) / 1000 Description

UL PRB MAP Data Info


This information shows the log of transmit physical resource mapping information. Parameter SFN TTI Bandwidth Channel Type> Count Channel Type> Rate PRACH PUCCH PUSCH SRS PUSCH+SRS PUCCH+SRS Frame number TTI number 0:1.4MHz, 1:3MHz, 2:5MHz, 3:10MHz, 4:15MHz, 5:20MHz DTX/ PRACH/ PUCCH/ PUSCH/ SRS/ PUSCH+SRS/ PUCCH+SRS Count DTX/ PRACH/ PUCCH/ PUSCH/ SRS/ PUSCH+SRS/ PUCCH+SRS Rate RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in PRACH RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in PUCCH RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in PUSCH RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in SRS RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in PUSCH+SRS RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in PUCCH+SRS Description

PUSCH PHY Throughput


UL Throughput log shows the Uplink data throughput at UE side. Parameter NEW Transmission Description A number of bits about new transmission per 1 sec (new_bit_nums) / 1000

XCAP-LTE Analyzer Parameter Description/Ed.04

Total UL

A number of bits about re-transmission per 1 sec (new_bit_nums + retrans_bit_nums) / 1000

L2 DL Throughput
Parameter PDCP> Total PDCP> RB ID(x) RLC> Total Total Downlink PDCP Throughput (rbId total Byte*8/1000) Downlink PDCP Throughput per RB ID (rbId total Byte*8/1000) Total Downlink RLC Throughput (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM), 4 ~ 5 (UM) RLC> AM> Total Total Downlink RLC AM Throughput (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM) RLC> AM> RB ID(x) Downlink RLC AM Throughput per RB ID (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM) RLC> UM> Total Total Downlink RLC UM Throughput (rbId total Byte*8/1000) Precondition: index 4 ~ 5 (AM) RLC> UM> RB ID(x) Downlink RLC UM Throughput per RB ID (rbId total Byte*8/1000) Precondition: index 4 ~ 5 (AM) MAC Downlink MAC Throughput (MacDlTotalBytes*8/1000) Description

L2 UL Throughput
Parameter PDCP> Total PDCP> RB ID(x) RLC> Total Total Uplink PDCP Throughput (rbId total Byte*8/1000) Uplink PDCP Throughput per RB ID (rbId total Byte*8/1000) Total Uplink RLC Throughput (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM), 4 ~ 5 (UM) RLC> AM> Total Total Uplink RLC AM Throughput (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM) Description

Copyright by Accuver Ltd.

Page 15

RLC> AM> RB ID(x)

Uplink RLC AM Throughput per RB ID (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM)

RLC> UM> Total

Total Uplink RLC UM Throughput (rbId total Byte*8/1000) Precondition: index 4 ~ 5 (AM)

RLC> UM> RB ID(x)

Uplink RLC UM Throughput per RB ID (rbId total Byte*8/1000) Precondition: index 4 ~ 5 (AM)

MAC

Uplink MAC Throughput (MacUlTotalBytes*8/1000)

PDSCH MAC BLER


This item is for MAC BLER of downlink (PDSCH). Ratio of transport blocks which remain unacknowledged (CRC failure) after HARQ retransmission divided by total number of initial transmissions received by UE MAC Parameter Instant> All Instant> Codeword #0 Instant> Codeword #1 Cumulative> All Cumulative> Codeword #0 Cumulative> Codeword #1 Instant total MAC BLER ( (cwd0ErrNum/cwd0TBNum) *100 + (cwd1ErrNum/cwd1TBNum) *100 ) / 2 Instant code word #0 MAC BLER (cwd0ErrNum/cwd0TBNum) *100 Instant code word #1 MAC BLER (cwd1ErrNum/cwd1TBNum) *100 Cumulative total MAC BLER Cumulative code word #0 MAC BLER Cumulative code word #1 MAC BLER Description

RLC States Info


This item provides state information of RLC Tx/Rx Entity. Parameter Tx States> RB ID (x)> Mode Tx States> RB ID (x)> State Rx States> RB ID (x)> Mode Rx States> RB ID (x)> State Tx States RLC Mode (AM /UM/TM) Tx States RLC Tx Entity state (NULL/DTR) Rx States RLC Mode (AM /UM/TM) Rx States RLC Tx Entity state (NULL/DTR) Description

XCAP-LTE Analyzer Parameter Description/Ed.04

MAC State Info


This item includes MAC DL/UL state information. Parameter MAC UL State Current state of MAC uplink (0-NOT_CONFIGURED, 1-CONFIGURED, 2-OUT_OF_SYNC, 3-IN_SYNC, 4IN_CR, 5-READY_TO_SCHED ) MAC DL State Current State of MAC downlink (0-NOT_CONFIGURED, 1-CONFIGURED, 2-PCH_STATE, 3-RACH_STATE, 4DSCH_STATE) Description

MAC UL Transmission Info


This item is for total packets information of uplink data transmission. Parameter Count> 1st Trans Count> 1st Re-Trans Count> 2nd Re-Trans Count> 3rd Re-Trans Count> 4th Re-Trans Count> 5th Re-Trans Count> 6th Re-Trans Count> 7th Re-Trans Count> 8th Re-Trans Count> 9th Re-Trans Count> 10th Re-Trans Count> Total Trans Count> Bad Count Percentage> 1st Trans Percentage> 1st ReTrans Percentage> 2nd ReTrans Percentage> 3rd ReTrans Percentage> 4th ReTrans Percentage> 5th ReTrans Success in 1st transmission Success in 1st re-transmission Success in 2nd re-transmission Success in 3rd re-transmission Success in 4th re-transmission Success in 5th re-transmission Success in 6th re-transmission Success in 7th re-transmission Success in 8th re-transmission Success in 9th re-transmission Success in 10th re-transmission SuccessCnt i (Where, i = 0 to 10) Bad Count 1st Trans/(Total Trans+Bad Count)*100 1st Re-Trans/(Total Trans+Bad Count)*100 2nd Re-Trans/(Total Trans+Bad Count)*100 3rd Re-Trans/(Total Trans+Bad Count)*100 4th Re-Trans/(Total Trans+Bad Count)*100 5th Re-Trans/(Total Trans+Bad Count)*100 Description

Copyright by Accuver Ltd.

Page 17

Percentage> 6th ReTrans Percentage> 7th ReTrans Percentage> 8th ReTrans Percentage> 9th ReTrans Percentage> 10th ReTrans Percentage> Total Trans Percentage> Bad Percentage

6th Re-Trans/(Total Trans+Bad Count)*100 7th Re-Trans/(Total Trans+Bad Count)*100 8th Re-Trans/(Total Trans+Bad Count)*100 9th Re-Trans/(Total Trans+Bad Count)*100 10th Re-Trans/(Total Trans+Bad Count)*100 Total Trans/(Total Trans+Bad Count)*100 Bad Count/(Total Trans+Bad Count)*100

RACH REQ Info


This item includes RACH request information. Parameter RACH Transmit Time Retransmission Num RACH Type RACH transmit time Retransmission Num 0 : INITIAL 1 : HANDOVER 2 : UL DATA ARRIVAL 3 : DL DATA ARRIVAL 4 : SR MAX 5 : NO_SR_CONFIG RA-RNTI Preamble ID RACH RNTI Preamble Identity Description

RACH RSP General Info


This item includes RACH response information. Parameter RACH Response Receiving Time Result RACH Preamble Identity BackOff Indicator Time Advance Temporary C-RNTI MCS RACH response receiving time 0: NACK, 1: ACK RACH Preamble Identity BackOff Indicator Time Advance Temporary C-RNTI Modulation and coding Scheme Description

XCAP-LTE Analyzer Parameter Description/Ed.04

TPC for scheduled PUSCH Hopping Flag UL Delay CQI Request Resource Block Assignment Access RACH Latency

TPC command for scheduled PUSCH Hopping Flag UL Delay CQI Request Resource block assignment(10bits) Access RACH Latency (sec)

RNTI Info
This item includes RNTI information. Parameter C-RNTI RA-RNTI Temporary C-RNTI C-RNTI RA-RNTI Temporary C-RNTI Description

Serving Cell & Neighbor Cell Lists


Parameter Serving Cell Info> UE State Current UE state - UE_IDLE_MODE - UE_CONNECTED_MODE - NO_SERVICE - NON_LTE_RAN Serving Cell Info> Freq UL Serving Cell Info> Freq DL Serving Cell Info> PCI Serving Cell Info> TAC Serving Cell Info> PLMN Identity Serving Cell Info> Global Cell ID Intra Freq Cell Lists> DL Freq Intra Freq Cell Lists> Serving Cell> Serving PCI Intra Freq Cell Serving PCI Uplink Carrier Frequency Downlink Carrier Frequency Physical Cell Identity Tracking Area Code PLMN Identity Global Cell ID Downlink Carrier Frequency Description

Copyright by Accuver Ltd.

Page 19

Intra Freq Cell Lists> Serving Cell> Serving RSRP Intra Freq Cell Lists> Serving Cell> Serving RSRQ Intra Freq Cell Lists> Serving Cell> Serving RSSI Intra Freq Cell Lists> Serving Cell> All Cell Info Intra Freq Cell Lists> Monitored Cell> Monitored Cell Count Intra Freq Cell Lists> Monitored Cell> Monitored Cell List Intra Freq Cell Lists> Monitored Cell> Summary Monitored Cell List Intra Freq Cell Lists> Monitored Cell> RSRP Intra Freq Cell Lists> Monitored Cell> RSRQ Intra Freq Cell Lists> Monitored Cell> RSSI Intra Freq Cell Lists> Monitored Cell> Top Set Intra Freq Cell Monitored RSRP per PCI Intra Freq Cell Monitored RSRQ per PCI Intra Freq Cell Monitored RSSI per PCI PCI RSRP RSRQ RSSI Intra Freq Cell Lists> Detected Cell> Detected Cell Count Intra Freq Cell Lists> Detected Cell> Detected Cell List Intra Freq Cell Lists> Detected Cell> Summary Detected Cell List Detected PCI List with (RSRP,RSRQ) from Intra Freq Cell Detected PCI List from Intra Freq Cell Number of Detected PCI from Intra Freq Cell PCI with RSRP strength from top 1 to 20 from Intra Freq Monitored Cell Top 1 to 20 RSRP from Intra Freq Monitored Cell Top 1 to 20 RSRQ from Intra Freq Monitored Cell Top 1 to 20 RSSI from Intra Freq Monitored Cell Monitored PCI List with (RSRP,RSRQ) from Intra Freq Cell Monitored PCI List from Intra Freq Cell Number of Monitored PCI from Intra Freq Cell Intra Freq Cell Serving RSRP/RSSQ/RSSI per PCI Intra Freq Cell Serving RSSI Intra Freq Cell Serving RSRQ Intra Freq Cell Serving RSRP

XCAP-LTE Analyzer Parameter Description/Ed.04

Intra Freq Cell Lists> Detected Cell> RSRP Intra Freq Cell Lists> Detected Cell> RSRQ Intra Freq Cell Lists> Detected Cell> RSSI Intra Freq Cell Lists> Detected Cell> Top Set

Intra Freq Cell Detected RSRP per PCI Intra Freq Cell Detected RSRQ per PCI Intra Freq Cell Detected RSSI per PCI PCI RSRP RSRQ RSSI PCI with RSRP strength from top 1 to 20 from Intra Freq Detected Cell Top 1 to 20 RSRP from Intra Freq Detected Cell Top 1 to 20 RSRQ from Intra Freq Detected Cell Top 1 to 20 RSSI from Intra Freq Detected Cell

Intra Freq Cell Lists> All Set Intra Freq Cell Lists> Top Set

Intra Freq Cell RSRP/RSRQ/RSSI/Cell State per PCI PCI RSRP RSRQ RSSI PCI with RSRP strength from top 1 to 20 from Intra Freq Cell Top 1 to 20 RSRP from Intra Freq Cell Top 1 to 20 RSRQ from Intra Freq Cell Top 1 to 20 RSSI from Intra Freq Cell Top 1 to 20 Cell State from Intra Freq Cell Cell State - Serving - Monitored - Detected

Inter Freq Cell Lists> Freq DL(x)>PCI(y)> RSRP Inter Freq Cell Lists> Freq DL(x)>PCI(y)> RSRQ Inter Freq Cell Lists> Freq DL(x)>PCI(y)> RSSI Inter Freq Cell Lists> Freq DL(x)>PCI(y)> Cell Type Inter frequency cell type 1 : monitored cell 2 : detected cell Inter frequency cell Received Power Inter frequency cell Reference Signal Received Quality Inter frequency cell Reference Signal Received Power

NAS System Info


Parameter PLMN_ID TAC Cell ID TAI List PLMN ID of the current cell TAC of the current cell Cell ID of the current cell Tracking Area identity List MCC (Mobile Country Code), MNC (Mobile Network Code) and TAC (Tracking Area Code). Description

Copyright by Accuver Ltd.

Page 21

RRC BCH Status Info


This item provides the information of BCH status. Parameter RRC BCH Status> PCI RRC BCH Status> Freq DL RRC BCH Status> Purpose Physical Cell Identity (0~503) DL Frequency Purpose of BCH Setup - SIB_NORMAL, - CELL_RESELECTION, - SIB_MODIFICATION, - MOVE_TO_IDLE, - SIB_CONNECTED, - SFN_READ, - SPECIFIED_SIB, - SIBC_SIB RRC BCH Status> Result Result of receiving System Information. - SUCCESS, - PLMN_MISMATCH, - MIB_TIMEOUT, - SI_TIMEOUT, - LAST_RESULT Description

NAS State Info


This item provides the state information of EMM (EPS Mobility Management), ECM (EPS Connection Management) and PLMN and EU (EPS Update) status when each state is changed. Parameter EMM State ECM State PLMN State EU State Description Current state of EMM (EPS Mobility Management) Current state of ECM (EPS Connection Management) Current state of PLMN Current EU (EPS Update) status

NAS State Info(R4)


This item provides the NAS state information of EMM (EPS Mobility Management), ECM (EPS Connection Management) and PLMN and EMM Cache status when each state is changed. Parameter EMM State ECM State PLMN State EMM Cache State Description Current state of EMM (EPS Mobility Management) Current state of ECM (EPS Connection Management) Current state of PLMN Current state of EMM Cache

XCAP-LTE Analyzer Parameter Description/Ed.04

Radio & NAS Signaling Failure Info


Parameter Radio Problem Cause NAS Signaling Failure Cause Description Radio problem diagnostic logging attribute. NAS signaling failure diagnostic logging attribute

RRC Freq Scan Info


This item displays the result of frequency scan. Parameter Search Type Cell Search Method - Frequency LIST - Frequency RANGE Freq DL RSRP DL Frequency Reference Signal Received Power Description

Cell Reselection Info


This item provides the information on both source cell and target cell when RRC perform cell reselection. Parameter Old Freq DL Old Cell ID New Freq DL New Cell ID Old Carrier Frequency Old Cell Identity New Carrier Frequency New Cell Identity Description

Handover History
This item displays handover history, delay and result. Parameter Source Cell Target Cell Handover Delay Result Handover Type Source Cell Physical Identity Target Cell Physical Identity Handover delay (Unit : ms) - FAIL - SUCCESS - LTE - Outbound IRAT - Inbound IRAT Description

Copyright by Accuver Ltd.

Page 23

Data Path Packet Loss


This item is for UL/DL packet loss of data path(HIM/PDCP/L2). Parameter UL UsbBlockTime UL SdioBlockTime UL UsbUnreg UL SdioUnreg UL HimAllocFail UL DimInvHdr UL DimNoRB UL PdcpSduFull UL PdcpPduBufFull UL PdcpCipAllocFail UL PdcpDisTimer UL MacSchedMiss DL PhyAllocFail DL MacInvHdr DL RlcDuplication DL RlcInvHdr DL RlcOutWnd DL RlcRsmFull DL PdcpInvHdr DL PdcpOutWnd DL CipAllocFail DL DimInvalid DL HimIfFull DL UsbBlockTime DL SdioBlockTime DL UsbPacketLoss DL SdioPacketLoss UL : USB Blocking count UL : SDIO Blocking count UL : number of discarded packet in USB by unregistered connection UL : number of discarded packet in SDIO by unregistered connection UL : Memory allocation fail count in HIM UL : Number of discarded packet in DIM by Invalid header UL : Number of discarded packet in DIM because of no RB UL : Fail count in PDCP by PDCP SDU Queue full UL : Number of discarded packet in PDCP by PDCP PDU Queue full UL : Number of discarded packet in PDCP by Ciphering block full UL : Number of discarded packet by PDCP discard timer expiry UL : Number of discarded MAC PDU which is not transfered DL : Number of discarded MAC PDU by memory allocation in L1 DL : Number of discarded MAC PDU by invalid MAC header DL : number of discarded RLC PDU by duplication DL : number of discarded RLC PDU by invalid RLC header DL: number of discarded RLC PDU which falls outside of window DL : number of discard RLC PDU by RSM buffer full DL : number of discarded PDCP PDU by invalid PDCP header DL : number of discarded PDCP PDU which falls outside of window DL : Number of discarded packet in PDCP by Ciphering block full DL : Number of discarded packet in DIM by IP Header length mismatch DL : Number of discarded packet in HIM by interface buffer full DL : USB block count DL : SDIO block count DL : number of discarded packet in USB DL : number of discard packet in SDIO Description

ESM Instance Info


This item includes ESM instance information R3. Maximum number of ESM instance is 15(1~15). The EPS Id uniquely identifies each ESM instance. Parameter Tab Index EPS Id Linked Bearer Id 1: 1 tab, 2: 2 EPS ID Linked Bearer ID
st nd

Description tab, 15: 15


th

tab

XCAP-LTE Analyzer Parameter Description/Ed.04

PDN Address APN QCI EPS Type

PDN IP Address Access Point Name QCI (1 ~ 9) - NONE BEARER TYPE - DEFAULT_BEARER - DEDICATED_BEARER

ESM State PTI Instance Id Deactivate Mode

- DEACTIVE - ACTIVE PTI Instance ID - NONE_MODE - NORMAL - NORMAL_ALL - DETACH - STATUS_IND - PDN_DISCONNECT - PDN_DISCONNECT_REJECT - PDN_DISCONNECT_TIMEOUT - MODIFICATION_REJECT - MODIFICATION_TIMEOUT - OVERWRITE - LOCALLY

Overwrite Mode

- NONE BEARER TYPE - DEFAULT_BEARER - DEDICATED_BEARER

Copyright by Accuver Ltd.

Page 25

Samsung
Common Basic Info

Parameter RAT Radio Access Technology - GSM - GPRS - UMTS - EDGE - HSPA - LTE Modem Status Modem Status - INITIAL - ACQUISITION - IDLE - ACCESS - TRAFFIC - NO SERVICE MIMO Type MIMO Type - SISO - SIMO - MISO - MIMO Rx Frequency Tx Frequency DL Frequency (MHz) UL Frequency (MHz)

Description

Common Data Info

Parameter DL Throughput UL Throughput DL BLER DL BLER DL FER UL FER

Description DL Throughput for GSM/GPRS/UMTS/EDGE/HSPA/ LTE UL Throughput for GSM/GPRS/UMTS/EDGE/HSPA/ LTE DL Block Error Rate for GSM/GPRS/UMTS/EDGE/HSPA/ LTE DL Block Error Rate for GSM/GPRS/UMTS/EDGE/HSPA/ LTE DL Frame Error Rate for GSM/GPRS/UMTS/EDGE/HSPA/ LTE UL Frame Error Rate for GSM/GPRS/UMTS/EDGE/HSPA/ LTE

XCAP-LTE Analyzer Parameter Description/Ed.04

LTE N Cell Information

Parameter EUTRAN>PLMN EUTRAN>Serving Cell Info> Cell ID EUTRAN>Serving Cell Info>RSSI EUTRAN>Serving Cell Info>CINR EUTRAN>Serving Cell Info>RSRP EUTRAN>Serving Cell Info>RSRQ EUTRAN>Serving Cell Info>All Cell Info EUTRAN>Neighbor Cell Info>NCell Num EUTRAN>Neighbor Cell Info>EARFCN EUTRAN>Neighbor Cell Info>RSSI EUTRAN>Neighbor Cell Info>RSRP EUTRAN>Neighbor Cell Info>RSRQ EUTRAN>Neighbor Cell Info>Top Set Neighbor Cell number Serving Cell RSRQ Serving Cell RSRP Serving Cell CINR PLMN Serving Cell ID(PCI 0 ~ 503) Serving Cell RSSI

Description

Serving Cell RSSI/CINR/RSRP/RSRQ per PCI

Neighbor Cell EARFCN per Cell ID(PCI) Neighbor Cell RSSI per Cell ID(PCI) Neighbor Cell RSRP per Cell ID(PCI) Neighbor Cell RSRQ per Cell ID(PCI) EARFCN Cell ID RSSI RSRP RSRQ Top 1 to 20 EARFCN from Neighbor Cell PCI with RSRP strength from top 1 to 20 from Neighbor Cell Top 1 to 20 RSSI from Neighbor Cell Top 1 to 20 RSRP from Neighbor Cell Top 1 to 20 RSRQ from Neighbor Cell

EUTRAN>All Set EUTRAN>Top Set

All(Serving/Neighbor) Cell EARFCN/RSSI/CINR/RSRP/RSRQ per PCI Cell ID EARFCN RSSI RSRP RSRQ Cell State PCI with RSRP strength from top 1 to 20 from Neighbor Cell Top 1 to 20 EARFCN from All(Serving/Neighbor) Cell Top 1 to 20 RSSI from All(Serving/Neighbor) Cell Top 1 to 20 RSRP from All(Serving/Neighbor) Cell Top 1 to 20 RSRQ from All(Serving/Neighbor) Cell Top 1 to 20 Cell State from All(Serving/Neighbor) Cell Serving, Neighbor

UTRAN>UARFCN

UARFCN per PSC

Copyright by Accuver Ltd.

Page 27

UTRAN>RSSI UTRAN>RSCP UTRAN>Ec/Io UTRAN>FDD/TDD

UTRAN RSSI per PSC UTRAN RSCP per PSC UTRAN Ec/Io per PSC UTRAN FDD/TDD per PSC - FDD - TDD

UTRAN>Top Set

UARFCN PSC RSSI RSCP Ec/Io FDD/TDD

Top 1 to 20 UARFCN from UTRAN PSC with Ec/Io strength from top 1 to 20 from UTRAN Top 1 to 20 RSSI from UTRAN Top 1 to 20 RSCP from UTRAN Top 1 to 20 Ec/Io from UTRAN Top 1 to 20 FDD/TDD from UTRAN

GERAN>RSSI GERAN>BSIC GERAN>Top Set

GERAN RSSI per ARFCN GERAN BSIC per ARFCN ARFCN BSIC RSSI ARFCN with RSSI strength from top 1 to 20 from GERAN Top 1 to 20 BSIC from GERAN Top 1 to 20 RSSI from GERAN

CDMA2000>Frequency CDMA2000>Ec/Io CDMA2000>1xRTT/HR PD CDMA2000>PN Phase CDMA2000>Top Set

CDMA2000 Frequency per PN CDMA2000 Ec/Io per PN CDMA2000 1xRTT/HRPD per PN CDMA2000 PN Phase per PN Frequency PN Ec/Io PN Phase 1xRTT/HRPD Top 1 to 20 Frequency from CDMA2000 PN with Ec/Io strength from top 1 to 20 from CDMA2000 Top 1 to 20 Ec/Io from CDMA2000 Top 1 to 20 PN Phase from CDMA2000 Top 1 to 20 1xRTT/HRPD from CDMA2000

LPHY Cell Search Info

Parameter Cell ID CP type Cell ID(PCI 0 ~ 503) Cyclic Prefix type - Normal - Extended Antenna[x]>RSRP Antenna[x]>RSRQ Antenna[x]>RSSI Antenna[x] RSRP (where, x = 0 ~3) Antenna[x] RSRQ (where, x = 0 ~3) Antenna[x] RSSI (where, x = 0 ~3)

Description

XCAP-LTE Analyzer Parameter Description/Ed.04

LPHY System Info

Parameter Transmission mode Transmission mode - SISO - SIMO - 2TX SFBC - 4TX SFBC-FSTD

Description

- 2TX Open-loop SM-: 4TX Open-loop SM - 2TX Closed-loop SM, Rank=2 - 4TX Closed-loop SM, Rank=2 - 2TX Multi-user MIMO - 4TX Multi-user MIMO - 2TX Closed-loop SM, Rank=1 - 4TX Closed-loop SM, Rank=1 - port5 SISO - port5 SIMO DL Pwr Control>Pa Index Pa Index - [-6 dB] - [ -4.77 dB] - [-3 dB] - [-1.76 dB] - [0 dB] - [1 dB] - [2 dB] - [3 dB] DL Pwr Control>Pb Index Pb Index - 1 (One Antenna) - 4/5 (One Antenna) - 3/5 (One Antenna) - 2/5 (One Antenna) - 5/4 (Two or Four Antenna) - 1 (Two or Four Antenna) - 3/4 (Two or Four Antenna) - 1/2 (Two or Four Antenna) DL Pwr Control>CQI feedback type(Aperiodic) CQI feedback type(Aperiodic) - Aperiodic Mode 1-2 - Aperiodic Mode 2-0 - Aperiodic Mode 2-2 - Aperiodic Mode 3-0 - Aperiodic Mode 3-1

Copyright by Accuver Ltd.

Page 29

DL Pwr Control>CQI feedback type(Periodic)

CQI feedback type(Periodic) - Periodic Mode 1-0 - Periodic Mode 1-1 - Periodic Mode 2-0 - Periodic Mode 2-1

DL Pwr Control>Codebook Subset Restriction Codebook Subset Restriction

LPHY Channel Quality Info

Parameter CINR>CINR 0 CINR>CINR 1 CQI Metric>CQI Metric0 CQI Metric>CQI Metric1 CQI Metric>RI CQI Metric>PMI CQI Metric>Best PMI CINR 0 for Ant 0 CINR 1 for Ant 1 Channel Quality information Metric0 Channel Quality information Metric1 Rank Indication Precoding Matrix Indicator Best Precoding Matrix Indicator

Description

LPHY Parameter Info

Parameter DL System Info>DL BW Downlink System Bandwidth - 1.4M - 3M - 5M - 10M - 15M - 20M DL System Info>CP Type DL System Info>eNB Ant Num DL System Info>UE Ant Num DL System Info>Cell ID DL System Cyclic Prefix type - Normal - Extended -1 -2 -4 -1 -2 Cell ID(PCI 0 ~ 503)

Description

XCAP-LTE Analyzer Parameter Description/Ed.04

UL System Info>UL BW

Uplink System Bandwidth - 1.4M - 3M - 5M - 10M - 15M - 20M

UL System Info>CP Type

UL System Cyclic Prefix type - Normal - Extended

LPHY PHICH Info

Parameter PHICH group number PHICH duration

Description Physical HARQ indicator channel group number (parameter to derive number of PHICH groups) Physical HARQ indicator channel duration - Short (Normal) - Extended

LL1 RF & Sync Info

Parameter RSSI Ant0 RSSI Ant1 TX Power Sync Info>Cell ID Sync Info>SFN PBCH Info>Bandwidth

Description Received signal strength indication for Ant 0 Received signal strength indication for Ant 1 Transmitted Power Sync Cell ID Sync SFN Bandwidth - 1.4M - 3M - 5M - 10M - 15M - 20M

PBCH Info>Phich Resource

PHICH Resource - 1/6 - 1/2 -1 -2

Copyright by Accuver Ltd.

Page 31

PBCH Info>Phich Duration PBCH Info>eNB Ant

PHICH Duration - Short (Normal) - Extended eNB(LTE Site) Antenna -1 -2

LL1 Downlink Info

Parameter PDSCH BLER RB Num MCS Level0 MCS Level1 Modulation0 Modulation1 PDSCH Block Error Rate Resource Block Number for DL MCS Level0 for DL MCS Level1 for DL

Description

Modulation0 (QPSK, 16QAM, 64QAM) for DL Modulation1 (QPSK, 16QAM, 64QAM) for DL

LL1 Uplink Info

Parameter PUSCH BLER RB Num MCS Level Modulation PUSCH Block Error Rate Resource Block Number for UL MCS Level for UL

Description

Modulation (QPSK, 16QAM, 64QAM) for UL (LTE UE CAPA 5 supports 64QAM.)

LL1 Measurement Config Info

Parameter S-measure Gap Pattern Gap Start SFN Gap Start Subframe EUTRA quantity EUTRA FC RSRP EUTRA FC RSRQ S-measure Gap Pattern Gap Start System Frame Number Gap Start Subframe EUTRA quantity

Description

EUTRA Fc RSRP (where, Fc: Frequency of the carrier centre frequency) EUTRA Fc RSRQ (where, Fc: Frequency of the carrier centre frequency)

XCAP-LTE Analyzer Parameter Description/Ed.04

LL2 SCH Configuration Info

Parameter DL SCH Config>Semi Persist Sched Interval UL SCH Config> MaxHARQ-Tx UL SCH Config>Semi Persist Sched Interval UL SCH Config>Periodic BSR timer Max HARQ-Tx [Unit: n]

Description Semi Persist Schedule Interval [Unit: sf]

Semi Persist Schedule Interval [Unit: sf] Periodic Buffer Status Report timer [Unit: n]

Timer & Preamble Info

Parameter Time Alignment Timer Info>Time Alignment Timer PHR Configuration Info>Periodic PHR Timer PHR Configuration Info>PHR Prohibit Timer PHR Configuration Info>DL Pathloss Change Preamble Info>No. of RA-Preambles Preamble Info>Size of RA-Preambles Group A Number of RA-Preambles [Unit: n] DL Pathloss Change [Unit: dB] PHR Prohibit Timer [Unit: sf] Periodic PHR Timer [Unit: sf] Time Alignment Timer [Unit: sf]

Description

Size of RA-Preambles Group A [Unit: n]

Power Ramping & RA Supervision Info

Parameter Power Ramping Param Info>Power Ramping Step Power Ramping Step[Unit: dB]

Description

Copyright by Accuver Ltd.

Page 33

Power Ramping Param Info>Preamble Initial Rx Target Pwr RA Supervision Info>Preamble Trans Max RA Supervision Info>RA Response Window Size RA Supervision Info>MAC Contention Resolution Timer

Preamble Initial Rx Target Power [Unit: dBm]

Preamble Trans Max [Unit: n]

RA Response Window Size [Unit: sf] MAC Contention Resolution Timer [Unit: sf]

Max HARQ Msg3Tx & RACH Info

Parameter Max HARQ Msg3Tx Info>MaxHARQ-Msg3Tx RACH Info>PREAMBLE_ID RACH Info>Back Off Timer Value RACH Info>Preamble Counter Preamble Counter Back Off Timer Value [Unit: ms] Preamble ID Max HARQ-Msg3Tx

Description

LL2 RNTI Info

Parameter SI-RNTI P-RNTI Temp C-RNTI C-RNTI RA-RNTI SPS-RNTI SI-RNTI P-RNTI Temporary C-RNTI C-RNTI RA-RNTI SPS-RNTI

Description

LL2 RLC Info

Parameter Uplink>RB ID [x]>UM SN length

Description UM SN length for Uplink (where, x = 0 ~ 31)

XCAP-LTE Analyzer Parameter Description/Ed.04

Uplink>RB ID [x]>Poll retransmit timer Uplink>RB ID [x]>Poll PDU Uplink>RB ID [x]>Poll Byte Uplink>RB ID [x]>Max Retransmit threshold Uplink>RB ID [x]>Active Info Downlink>RB ID [x]>UM SN length Downlink>RB ID [x]>T1 time value Downlink>RB ID [x]>Status Prohibit timer value Downlink>RB ID [x]>Active Info

Poll retransmit timer for Uplink (where, x = 0 ~ 31) [Unit: ms] Poll PDU for Uplink (where, x = 0 ~ 31) Poll Byte for Uplink (where, x = 0 ~ 31) [Unit: kB] Max Retransmit threshold for Uplink (where, x = 0 ~ 31) [Unit: n] Active Info for Uplink (where, x = 0 ~ 31) UM SN length for Downlink (where, x = 0 ~ 31) T1 time value for Downlink (where, x = 0 ~ 31) [Unit: ms] Status Prohibit timer value for Downlink (where, x = 0 ~ 31) [Unit: ms]

Active Info for Downlink (where, x = 0 ~ 31) - Deactive - Active

LL2 PDCP Info

Parameter Uplink>PDCP Info Num Uplink>RB ID [x]>Connection Info Uplink>RB ID [x]>Integrity Protection Flag Uplink>RB ID [x]>Ciphering Flag

Description Uplink PDCP Info Number (where, x = 0 ~ 31) Connection Info for Uplink (where, x = 0 ~ 31) - invalid - valid Integrity Protection Flag for Uplink (where, x = 0 ~ 31) - Null - Snow3G - AES Ciphering Flag for Uplink (where, x = 0 ~ 31) - Null - Snow3G - AES

Uplink>RB ID [x]>SN Window Size

SN Window Size for Uplink (where, x = 0 ~ 31) - SRBs - DRBs on RLC UM - DRBs on RLC UM or AM

Copyright by Accuver Ltd.

Page 35

Uplink>RB ID [x]>SDU Discard Timer

SDU Discard Timer for Uplink (where, x = 0 ~ 31) - Discard timer disable - Discard timer time (0x01 ~ 0xFE) [Unit: ms] - Infinity

Downlink>PDCP Info Num Downlink>RB ID [x]>Connection Info Downlink>RB ID [x]>Integrity Protection Flag Downlink>RB ID [x]>Ciphering Flag

Downlink PDCP Info Number (where, x = 0 ~ 31) Connection Info for Downlink (where, x = 0 ~ 31) - invalid - valid Downlink>RB ID [x]>Integrity Protection Flag for Downlink (where, x = 0 ~ 31) - Null - Snow3G - AES Downlink>RB ID [x]>Ciphering Flag for Downlink (where, x = 0 ~ 31) - Null - Snow3G - AES

Downlink>RB ID [x]>SN Window Size

Downlink>RB ID [x]>SN Window Size for Downlink (where, x = 0 ~ 31) - SRBs - DRBs on RLC UM - DRBs on RLC UM or AM

LRRC Serving Cell Info

Parameter Global Cell ID Band PLMN ID TAC List Global Cell ID Band (Band 1 ~ 14, 17, 33 ~ 40) PLMN ID TAC List (TAC[0] & TAC[1])

Description

LRRC State Variables Info

Parameter RRC State RRC State - NULL - IDLE - CONNECTED - DISCONNECTING

Description

XCAP-LTE Analyzer Parameter Description/Ed.04

LRRC Timer info

Parameter T300 Timer 300 (Start)

Description

Transmission of RRCConnectionRequest (Stop) Reception of RRCConnectionSetup or RRCConnectionReject message, cell reselection and upon abortion of connection establishment by upper layers (At expiry) Perform the actions as specified in 3GPP 36.331 5.3.3.6 T301 Timer 301 (Start) Transmission of RRCConnectionReestabilshmentRequest (Stop) Reception of RRCConnectionReestablishment or RRCConnectionReestablishmentReject message as well as when the selected cell becomes unsuitable (At expiry) Go to RRC_IDLE T310 Timer 310 (Start) Upon detecting physical layer problems i.e. upon receiving N310 consecutive out-ofsync indications from lower layers (Stop) Upon receiving N311 consecutive in-sync indications from lower layers, upon triggering the handover procedure and upon initiating the connection reestablishment procedure (At expiry) If security is not activated: go to RRC_IDLE else: initiate the connection reestablishment procedure T311 Timer 311 (Start) Upon initiating the RRC connection re-establishment procedure (Stop) Selection of a suitable E-UTRA cell or a cell using another RAT (At expiry) Enter RRC_IDLE

LNAS State Variables Info

Copyright by Accuver Ltd.

Page 37

Parameter EMM Functional State EMM Functional State - DETACHED - IDLE - CONNECTED EMM State EMM State - NULL - DEREGISTERED - REGISTERED_INITIATED - REGISTERED - TAU_INITIATED - SERVICE_REQUEST_INITIATED - DEREGISTERED_INITIATED

Description

LNAS MM(SIM/PLMN/Security) Info

Parameter SIM Data Info>TAI SIM Data Info>S-TMSI SIM Data Info>SIM Update status SIM Data Info>IMSI SIM Data Info>GUTI SIM Data Info>HPLMN search period PLMN Selection Info>Registered PLMN Security Info>Status Security Status 0: Enable 1: Disable Security Info>NAS KSI Security Info>CK Security Info>IK Security Info>Security algo integrity NAS KSI CK IK Security algorithm integrity - INTEG_NULL_ALGO - INTEG_SNOW3G_ALGO - INTEG_AES_ALGO Security Info>Security algo ciphering Security algorithm ciphering - INTEG_NULL_ALGO - INTEG_SNOW3G_ALGO - INTEG_AES_ALGO Registered PLMN IMSI GUTI HPLMN search period TAI S-TMSI SIM Update status

Description

XCAP-LTE Analyzer Parameter Description/Ed.04

LNAS PDP/IP Info

Parameter PDP Info IP Info>IPv4 Address IP Info>IP Mode

Description EPS Bearer Id, Bearer Type and SM Cause IP v4 Address IP Mode - IPv4 - IPv6 - IPv4_IPv6

LDATA Throughput Info

Parameter Physical Layer>UL Throughput Physical Layer>DL Throughput

Description LTE PUSCH Throughput [Unit: Mbps] LTE PDSCH Throughput [Unit: Mbps]

LDATA Timing Info

Parameter Connection time

Description Connection time by Samsung LTE chipset [Unit: ms]

Copyright by Accuver Ltd.

Page 39

Qualcomm
Configuration Info

Parameter DL Common> TDD Common Config Subframe Assignment

Description 0 SUBFRAME_ASSIGN_0 1 SUBFRAME_ASSIGN_1 2 SUBFRAME_ASSIGN_2 3 SUBFRAME_ASSIGN_3 4 SUBFRAME_ASSIGN_4 5 SUBFRAME_ASSIGN_5 6 SUBFRAME_ASSIGN_6 0 SPECIAL_SUBFRAME_PATTERN_0 1 SPECIAL_SUBFRAME_PATTERN _1 2 SPECIAL_SUBFRAME_PATTERN _2 Special Subframe Patterns 3 SPECIAL_SUBFRAME_PATTERN _3 4 SPECIAL_SUBFRAME_PATTERN _4 5 SPECIAL_SUBFRAME_PATTERN _5 6 SPECIAL_SUBFRAME_PATTERN _6 7 SPECIAL_SUBFRAME_PATTERN_7 8 SPECIAL_SUBFRAME_PATTERN_8

DL Common> UL CP Config DL Common> UL Config

UL CP UL EARFCN

0 NORMAL_CP 1 EXTENDED_CP UL Cell earfcn (18000 <= Range <= 39649) Uplink bandwidth 6 (RBs) 1.4 MHz 15 (RBs) 3 MHz

UL Bandwidth

25 (RBs) 5 MHz 50 (RBs) 10 MHz 75 (RBs) 15 MHz 100 (RBs) 20 MHz

Additional Spectrum Emission DL Common> MIB info Num ENB Ant Ports

Additional Spectrum Emission (Range is 1 to 32) Valid values 1, 2, 4 PHICH-Duration 0 PHICH_NORMAL 1 PHICH_EXTENDED

PHICH Duration

XCAP-LTE Analyzer Parameter Description/Ed.04

Ng (HICH group multiplier) 0 1/6 PHICH Resource 1 1/2 21 32 DL Common> PDSCH Config Reference Signal Power Downlink Reference-signal transmit power (Range is -60 to 50 dBm) P_B indicates the ratio of PDSCH-to-RS EPRE in symbols with and without reference symbols for 1, 2 or 4 cell specific antenna ports P-b 0 PB0 = (1, 1), (2, 5/4), (4, 5/4) 1 PB1 = (1, 4/5), (2, 1), (4, 1) 2 PB2 = (1, 3/5), (2, 3/4), (4, 3/4) 3 PB3 = (1, 2/5), (2, 1/2), (4, 1/2) 4 PB_FW_HYPOTHESIS DL Common> MBSFN Config> Config[x] Allocation Offset allocation offset (Range is 0 to 7) allocation period 0 1 radio frame 1 2 radio frames Allocation Period 2 4 radio frames 3 8 radio frames 4 16 radio frames 5 32 radio frames subfn allocation type Sub-Fn Allocation Type Type 0 MBSFN allocation one frame Type 1 MBSFN allocation four frames subfn allocation mask based on subfn allocation type Sub-Fn Allocation Mask - First 6 bits (least significant bits) for Type 0 - All 24 bits for Type 1 - Total 24 bits mask DL Dedicated> PDCCH TPC Config for PUCCH TPC-RNTI RNTI for PUCCH power control using DCI format 3/3A (Range is 0001-003C, 003D-FFF3) DCI format 3 or 3A used for TPC Index DCI Format 0 DCI Format3 1 DCI Format3A Index of N or M TPC Index DL Dedicated> PDCCH TPC Config for PUSCH (Range is [1-15] for DCI format 3 and [1-31] for format 3A) TPC-RNTI RNTI for PUSCH power control using DCI format 3/3A (Range is 0001-003C, 003D-FFF3) DCI format 3 or 3A used for TPC Index DCI Format 0 DCI Format3 1 DCI Format3A

Copyright by Accuver Ltd.

Page 41

Index of N or M TPC Index Antenna Config (Range is [1-15] for DCI format 3 and [1-31] for format 3A) A bitmask of the codebook restriction. The number of bits used in the restriction varies with the transmission mode n2TxAntenna-tm3 : 2 n4TxAntenna-tm3 : 4 Codebook Subset Restriction n2TxAntenna-tm4 : 6 n4TxAntenna-tm4 : 64 n2TxAntenna-tm5 : 4 n4TxAntenna-tm5 : 16 n2TxAntenna-tm6 : 4 n4TxAntenna-tm6 : 16 Transmission mode 1 Tx mode 1 2 Tx mode 2 Transmission Mode 3 Tx mode 3 4 Tx mode 4 5 Tx mode 5 6 Tx mode 6 7 Tx mode 7 Tx Ant Selection Control DL Dedicated> PDSCH Config 0 Closed loop 1 Open loop P-a 0 - 6 dB 1 - 4.77 dB 2 - 3 dB P-a 3 - 1.77 dB 4 0 dB 5 1 dB 6 2 dB 7 3 dB 8 PA_FW_HYPOTHESIS DL Dedicated> UErelated Config UL Common> PUSCH Config C-RNTI n_sb C- RNTI value (Range is 0001-003C, 003D-FFF3) n_sb 0x0 - 1 to 0x3 4 Hopping-mode Hopping Mode 0x0 - Inter subframe 0x1 - Intra and inter subframe Hopping Offset Hopping offset (Range is 0 to 98)

XCAP-LTE Analyzer Parameter Description/Ed.04

Enable 64 QAM

1 indicates that 64 QAM is enabled while 0 indicates that no 64 QAM is allowed Group-hopping-enabled 1 indicates that Group Hopping is enabled while 0 Indicates that Group Hopping is disabled

Group Hopping Enabled Group Assignment PUSCH Sequence Hopping Enabled Cyclic Shift UL Common> PUCCH Config Delta Shift n_rb_cqi n_cs_an n1_pucch_an UL Common> SRS Config SRS Enabled SRS Bandwidth Config SRS Subframe Config Simultaneous ACK/NAK SRS

Group Assignment PUSCH (Range is 0 to 29) Sequence-hopping-enabled 1 indicates that Sequence Hopping is enabled while 0 Indicates that Sequence Hopping is disabled Cyclic Shift (Range is 0 to 7) Delta Shift (Range is 1 to 3) n_rb_cqi (Range is 0 to 98) n_cs_an (Range is 0 to 7) n1_pucch_an (Range is 0 to 2047) 0x0 Disable 0x1 Enable SRS Bandwidth Configuration (Range is 0 to 7) SRS subframe Configuration (Range is 0 to 15) Simultaneous-AN-and-SRS 1 indicates that Simultaneous transmission of ACK/NAK and SRS is enabled while 0 Indicates that it is disabled SRS Max Uplink Pilot Time Slot 1 indicates reconfiguration is enabled for UpPts while 0 indicates that reconfiguration is disabled. 0x0 Disable 0x1 Enable SRS Bandwidth (Range is 0 to 3) SRS hopping bandwidth (Range is 0 to 3) Frequency Domain Position (Range is 0 to 23) 0 corresponds to single and value 1 to indefinite (Range is 0 to 1) SRS Config Index (Range is 0 to 1023) Tx Combination (Range is 0 to 1) Cyclic Shift (Range is 0 to 7) 0x0 Disable 0x1 Enable

SRS Max UpPts UL Dedicated> SRS Config

SRS Enabled SRS Bandwidth SRS Hopping Bandwidth Freq Domain Position Duration SRS Config Index Tx Combination Cyclic Shift

UL Dedicated> CQI Config

CQI Enabled

Copyright by Accuver Ltd.

Page 43

CQI Reporting Mode Aperiodic 0x0 Mode12 CQI Reporting Mode Aperiodic 0x1 Mode20 0x2 Mode22 0x3 Mode30 0x4 Mode31 CQI Reporting Periodic Present CQI Format Indicator Nominal PDSCH RS EPRE Offset CQI PUCCH Resource Index RI Config Index K Simultaneous AckNack and CQI CQI-PMI Config Index UL Dedicated> Antenna Config 0x0 Not Present 0x1 - Present PUCCH CQI Feedback Type 0x0 Wideband CQI 0x1 Subband CQI Nominal PDSCH RS EPRE Offset (Range is -1 to 6) CQI PUCCH Resource Index (Range is 0 to 1185) RI Config Index (Range is 1 to 1023) K (Range is 1 to 4) Simultaneous-AN-and-CQI 1 indicates that simultaneous transmission of ACK/NACK and CQI is allowed and 0 indicates that it is not CQI/PMI Periodicity and offset Configuration Index (Range is 0 to 1023) Transmission mode 1 Tx mode 1 2 Tx mode 2 Transmission Mode 3 Tx mode 3 4 Tx mode 4 5 Tx mode 5 6 Tx mode 6 7 Tx mode 7 Tx Ant Selection Enabled Tx Ant Selection Control Codebook Subset Restriction GM Common> UL Frequency Config Cell Frequency 0 indicates that UE transmit antenna selection is disabled. If 1, then the field indicates whether UE transmit antenna selection control is closed-loop or open-loop 0 indicates closed loop and 1 indicates open loop Codebook Subset Restriction ul-EARFCN For FDD Default value determined from default Tx-RX frequency separation defined in [36.101] Range is For TDD This parameter is absent and it is equal to the downlink frequency.

XCAP-LTE Analyzer Parameter Description/Ed.04

Bandwidth Additional Spectrum Emission GM Common> PUCCH Config PUCCH Delta Shift n_rb_cqi n_cs_an n1_pucch_an GM Common> UL Power Control Config P0 Nominal PUSCH

Uplink bandwidth Additional Spectrum Emission (Range is 0 to 31) PUCCH Delta Shift (Range is 1 to 3) n_rb_cqi (Range is 0 to 98) n_cs_an (Range is 0 to 7) n1_pucch_an (Range is 0 to 2047) P0 Nominal PUSCH (Range is -126 to 24) Alpha 0x0 0 0x1 0.4 0x2 0.5

Alpha

0x3 0.6 0x4 0.7 0x5 0.8 0x6 0.9 0x7 1.0 P0 Nominal PUCCH (Range is -127 to -96) actual value = IE value * 2 [dB] Delta Preamble MSG3 Delta TF List PUCCH Format 1 Delta TF List PUCCH Format 1b Delta TF List PUCCH Format 2 Delta TF List PUCCH Format 2a Delta TF List PUCCH Format 2b 0x0 Disable 0x1 Enable SRS bandwidth configuration (Range is 0 to 7) SRS subframe configuration (Range is 0 to 15) Simultaneous-AN-and-SRS 1 indicates that Simultaneous transmission of ACK/NAK and SRS is enabled while 0 Indicates that it is disabled SRS Max Uplink Pilot Time Slot 1 indicates reconfiguration is enabled for UpPts while 0 indicates that reconfiguration is disabled

P0 Nominal PUCCH Delta Preamble MSG3 Delta TF List PUCCH Format 1 Delta TF List PUCCH Format 1b Delta TF List PUCCH Format 2 Delta TF List PUCCH Format 2a Delta TF List PUCCH Format 2b GM Common> SRS Config SRS Enabled SRS Bandwidth Config SRS Subframe Config Simultaneous ACK/NAK SRS

SRS Max UpPts

Copyright by Accuver Ltd.

Page 45

GM Common> UL Cyclic Prefix Config GM Common> PUSCH Config GM Dedicated> SR Config UL Cyclic Prefix Length

Uplink cyclic prefix length 0 corresponds to normal cyclic prefix and 1 corresponds to extended cyclic prefix Enable 64 QAM SR Enabled SR PUCCH Resource Index SR Config Index SR Max Transmissions 0x0 Disable 0x1 Enable 0x0 Disable 0x1 Enable SR PUCCH Resource Index (Range is 0 to 2047) SR Config Index (Range is 0 to 155) SR Max Transmissions(DSR_TRANS_MAX) (Range is 4 to 64) 0x0 Disable 0x1 Enable CQI Reporting Mode Aperiodic 0x0 Mode12 CQI Reporting Mode Aperiodic 0x1 Mode20 0x2 Mode22 0x3 Mode30 0x4 Mode31 Nominal PDSCH RS EPRE Offset CQI Reporting Periodic Present CQI Reporting Periodic Enabled CQI Format Indicator Nominal PDSCH RS EPRE Offset (Range is -1 to 6) 0x0 Not Present 0x1 - Present 0x0 Disable 0x1 Enable PUCCH CQI Feedback Type 0x0 Wideband CQI 0x1 Subband CQI Simultaneous AckNack and CQI CQI PUCCH Resource Index RI Config Index K CQI-PMI Config Index Simultaneous-AN-and-CQI 1 indicates that simultaneous transmission of ACK/NACK and CQI is allowed and 0 indicates that it is not CQI PUCCH Resource Index (Range is 0 to 1185) RI Config Index (Range is 1 to 1023) K (Range is 1 to 4) CQI/PMI Periodicity and offset Configuration Index (Range is 0 to 1023) 0x0 Disable 0x1 Enable SRS Bandwidth (Range is 0 to 3)

GM Dedicated> CQI Config

CQI Enabled

GM Dedicated> SRS Config

SRS Enabled SRS Bandwidth

XCAP-LTE Analyzer Parameter Description/Ed.04

SRS Hopping Bandwidth Freq Domain Position Duration Tx Combination Cyclic Shift SRS Config Index GM Dedicated> PHR Config PHR Enabled Periodic PHR Timer Prohibit PHR Timer DL Pathloss Change Threshold GM Dedicated> PUSCH TPC Config PUSCH TPC Enabled PUSCH TPC DCI Format PUSCH TPC Index

SRS hopping bandwidth (Range is 0 to 3) Frequency Domain Position (Range is 0 to 23) 0 corresponds to single and value 1 to indefinite (Range is 0 to 1) Tx Combination (Range is 0 to 1) Cyclic Shift (Range is 0 to 7) SRS Config Index (Range is 0 to 1023) 0x0 Disable 0x1 Enable PERIODIC_PHR_TIMER Value in number of subframes (Range is 0 to 1000). PROHIBIT PHR TIMER Value in number of subframes (Range is 0 to 1000). DL Pathloss Change Value in dB (Range is 0 to 6) 0x0 Disable 0x1 Enable 0x0 - Format 3 0x1 Format 3a Index of N or M N or M is dependent on the used DCI format (Range is 1 to 31) RNTI for PUSCH power control using DCI format 3/3A 0x0 Disable 0x1 Enable 0x0 - Format 3 0x1 Format 3a Index of N or M N or M is dependent on the used DCI format (Range is 1 to 31) RNTI for PUCCH power control using DCI format 3/3A max-HARQ-Tx (Range is 1 to 28) Configures TTI bundling on and OFF; can be configured for FDD and for TDD only for configurations 0, 1 and 6 Accumulation-enabled 1 corresponds to enabled, whereas 0 corresponds to disabled

PUSCH TPC-RNTI GM Dedicated> PUCCH TPC Config PUCCH TPC Enabled PUCCH TPC DCI Format PUCCH TPC Index

PUCCH TPC-RNTI GM Dedicated> UL SCH Config MAX HARQ Transmissions TTI Bundling Enabled GM Dedicated> UL Power Control Config Accumulation Enabled

P0 UE PUSCH

P0 UE PUSCH (Range is -8 to 7)

Copyright by Accuver Ltd.

Page 47

P0 UE PUCCH

P0 UE PUCCH (Range is -8 to 7) Delta MCS Enabled

Delta MCS Enabled

0 corresponds to value 0 corresponding to state disabled; 1 corresponds to value 1.25 corresponding to enabled P_SRS Offset For Ks=1.25, the actual parameter value is pSRS-offset value 3. For Ks=0, the actual parameter value is -10.5 + 1.5*pSRS-offset value.

P_SRS Offset

GM Dedicated> PUSCH Config

Delta Offset ACK Index Delta Offset CQI Index Delta Offset Index

Delta Offset ACK Index (Range is 0 to 15) Delta Offset CQI Index (Range is 0 to 15) Delta Offset Index (Range is 0 to 15) 0x0 Disable 0x1 Enable ACK/NAK Feedback Mode Parameter indicates one of the two TDD ACK/NACK feedback modes used 0 corresponds to use of ACK/NACK bundling, whereas 1 corresponds to ACK/NACK multiplexing The same value applies to both ACK/NACK feedback modes on PUCCH as well as on PUSCH ACK/NAK Repetition Factor Parameter indicates whether ACK/NACK repetition is enable or disabled (Range is 2 to 6) PUCCH Resource for ACK/NAK Repetition (Range is 0 to 2047) Transmission mode 1 Tx mode 1 2 Tx mode 2 3 Tx mode 3 4 Tx mode 4 5 Tx mode 5 6 Tx mode 6 7 Tx mode 7 0 indicates that UE transmit antenna selection is disabled. If 1, then the field indicates whether UE transmit antenna selection control is closed-loop or open-loop 0 indicates closed loop and 1 indicates open loop Codebook Subset Restriction 0x0 Disable 0x1 Enable

GM Dedicated> PUCCH Config

PUCCH Cfg Enabled

ACK/NAK Feedback Mode

ACK/NAK Repetition Factor n1_PUCCH_ANRep GM Dedicated> Antenna Config

Transmission Mode

Tx Ant Selection Enabled Tx Ant Selection Control Codebook Subset Restriction GM Dedicated> CDRX Config CDRX Enable

XCAP-LTE Analyzer Parameter Description/Ed.04

On Duration Timer Inactivity Timer DL DRX Retx Timer Long Cycle Len Cycle Start Offset Short DRX Cycle Enable Short DRX Cycle Len Short DRX Timer PRACH Logical Root Seq Index

On Duration Timer pdcch subframes (Maximum value 200) Inactivity Timer pdcch subframes (Maximum value 2560) DL DRX Retx Timer pdcch subframes (Maximum value 33) Long Cycle Len pdcch subframes (Maximum value 2560) Cycle Start Offset pdcch subframes (Maximum value 2559) 0x0 Disable 0x1 Enable Short DRX Cycle Len pdcch subframes (Maximum value 640) Short DRX Timer pdcch subframes (Maximum value 16) Logical Root ZadOFF-Chu Sequence number for various preamble formats Range is 0 to 837 for Preamble Format 0-3 Range is 0 to 137 for Preamble Format 4 Random Access Preamble timing for a range of Preamble Formats (Range is 0 to 15) Controls grouping of preamble sequences in two sets, to differentiate a high speed UE from normal Frequency Resource offset (Range is 0 to 104) Maximum number of HARQ re-transmissions from UE for RACH message3 (Range is 1 to 8) Cyclic Shifts for various Preamble Formats Range is 0 to15 for Preamble Formats 0-3 Range is 0 to 6 for Pramble Format 4 Window size for reception of RACH message2 (Range is 2 to 10) 0 SUBFRAME_ASSIGN_0 1 SUBFRAME_ASSIGN_1 2 SUBFRAME_ASSIGN_2

RA Preamble Timing High Speed Flag PRACH Frequency Offset Max Transmissions MSG3 Cyclic Shift Zone Length RA Response Window Size TDD

Subframe Assignment

3 SUBFRAME_ASSIGN_3 4 SUBFRAME_ASSIGN_4 5 SUBFRAME_ASSIGN_5 6 SUBFRAME_ASSIGN_6

Copyright by Accuver Ltd.

Page 49

0 SPECIAL_SUBFRAME_PATTERN_0 1 SPECIAL_SUBFRAME_PATTERN _1 2 SPECIAL_SUBFRAME_PATTERN _2 Special Subframe Patterns 3 SPECIAL_SUBFRAME_PATTERN _3 4 SPECIAL_SUBFRAME_PATTERN _4 5 SPECIAL_SUBFRAME_PATTERN _5 6 SPECIAL_SUBFRAME_PATTERN _6 7 SPECIAL_SUBFRAME_PATTERN_7 8 SPECIAL_SUBFRAME_PATTERN_8

Power Info

Parameter RSSI(In-band) Ant0 Ant1 Comb RSSI(Total Band) Ant0 Ant1 Comb RSSI(Broadband) Ant0 Ant1 Comb Tx Power PUSCH PUCCH PRACH SRS AGC

Description RSSI(In-band) for Ant0 (Range: -120 dBm to -10 dBm) RSSI(In-band) for Ant1 (Range: -120 dBm to -10 dBm) [RSSI(In-band)>Ant0 + RSSI(In-band)>Ant1]/2 RSSI(Total Band) for Ant0 (Range: -120 dBm to -10 dBm) RSSI(Total Band) for Ant1 (Range: -120 dBm to -10 dBm) [RSSI(Total Band)>Ant0 + RSSI(Total Band)>Ant1]/2 RSSI(Broadband) for Ant0 (Range: -120 dBm to -10 dBm) RSSI(Broadband) for Ant1 (Range: -120 dBm to -10 dBm) [RSSI(Broadband)>Ant0 + RSSI(Broadband)>Ant1]/2 PUSCH Tx Power (Range: -112 dBm to 23 dBm) PUCCH Tx Power (Range: -112 dBm to 23 dBm) PRACH Tx Power (Range: -112 dBm to 23 dBm) SRS Tx Power (Range: -112 dBm to 23 dBm) AGC Tx Power (Range: -70 dBm to 32.3 dBm)

Cell Search

Parameter PSS> Dominant PSS Peak Value PSS> Dominant PSS Peak Position PSS> Dominant PSS Indices SSS> Dominant PCI Dominant PSS Peak value 10log10(x/128) in units of dB

Description

Sample position with 5 ms resolution (Range is 0 to (9600-1)) PSS Index (Range is 0 to 2) Dominant Cell ID(PCI)

XCAP-LTE Analyzer Parameter Description/Ed.04

SSS> Dominant SSS Peak Value SSS> Dominant SSS Position SSS> Detected Cell Info> PCI#

Dominant SSS Peak Value 10log10(x/256) in units of dB Start of SSS sequence in search sample server. Range is 0 to (search sample server length -1) SSS Peak Value SSS Position SSS Peak value per PCI SSS Position per PCI Cyclic prefix used per PCI CP 0 normal CP 1 extended CP Half Frame Hypothesis Half Frame Hypothesis per PCI 0 Preamble 1 MIDamble

Ant Correlation Result

Parameter Serving PCI RSSI Ant0 RSSI Ant1 RSSI Comb Antenna Correlation> Correlation Real> Tx Ant[x] Antenna Correlation> Correlation Imaginary> Tx Ant[x] Serving Cell PCI RSSI per Rx antenna0 RSSI per Rx antenna1 Combined RSSI

Description

Real part of Rx0 and Rx1 correlation Where, x is Tx Antenna (Range: 0 ~ 3). Imaginary part of Rx0 and Rx1 correlation Where, x is Tx Antenna (Range: 0 ~ 3).

Intrafreq Measurement Info

Parameter EARFCN Frequency Serving Cell> Serving PCI Serving Cell> Serving RSRP Downlink frequency as E-ARFCN

Description

Downlink frequency of the serving cell (Unit: MHz) Serving Cell PCI (Range: 0 ~ 503) RSRP RSRP0 RSRP1 Serving Cell RSRP (Range: -140dBm to -44dBm) Serving Cell RSRP0 (Range: -140dBm to -44dBm) Serving Cell RSRP1 (Range: -140dBm to -44dBm) Serving Cell RSRQ (Range: -30dB to 0 dB)

Serving Cell> Serving

RSRQ

Copyright by Accuver Ltd.

Page 51

RSRQ

RSRQ0 RSRQ1

Serving Cell RSRQ0 (Range: -30dB to 0 dB) Serving Cell RSRQ1 (Range: -30dB to 0 dB) Serving Cell RSSI (Range: -140dBm to -44dBm) Serving Cell RSSI0 (Range: -140dBm to -44dBm) Serving Cell RSSI1 (Range: -140dBm to -44dBm) Serving Cell SINR0 (Range: -20dB to +30dB) Serving Cell SINR1 (Range: -20dB to +30dB) Serving Cell RSRP per PCI (Range: -140dBm to -44dBm) Serving Cell RSRP0 per PCI (Range: -140dBm to -44dBm) Serving Cell RSRP1 per PCI (Range: -140dBm to -44dBm) Serving Cell RSRQ per PCI (Range: -30dB to 0 dB) Serving Cell RSRQ0 per PCI (Range: -30dB to 0 dB) Serving Cell RSRQ1 per PCI (Range: -30dB to 0 dB) Serving Cell RSSI per PCI (Range: -140dBm to -44dBm) Serving Cell RSSI0 per PCI (Range: -140dBm to -44dBm) Serving Cell RSSI1 per PCI (Range: -140dBm to -44dBm) Serving Cell SINR0 per PCI (Range: -20dB to +30dB) Serving Cell SINR1 per PCI (Range: -20dB to +30dB)

Serving Cell> Serving RSSI

RSSI RSSI0 RSSI1

Serving Cell> Serving SINR Serving Cell> All Cell Info> Serving RSRP

SINR0 SINR1 RSRP>PCI# RSRP0>PCI# RSRP1>PCI#

Serving Cell> All Cell Info> Serving RSRQ

RSRQ>PCI# RSRQ0>PCI# RSRQ1>PCI#

Serving Cell> All Cell Info> Serving RSSI

RSSI>PCI# RSSI0>PCI# RSSI1>PCI#

Serving Cell> All Cell Info> Serving SINR Neighbor Cell> Neighbor Neighbor Cell> Cell Count Neighbor Cell> Neighbor Cell List Neighbor Cell> Summary Neighbor Cell List Neighbor Cell> Neighbor RSRP

SINR0>PCI# SINR1>PCI#

Number of Neighbor PCI

Neighbor PCI List

Neighbor PCI List with (RSRP,RSRQ)

RSRP>PCI# RSRP0>PCI# RSRP1>PCI#

Neighbor Cell RSRP per PCI (Range: -140dBm to -44dBm) Neighbor Cell RSRP0 per PCI (Range: -140dBm to -44dBm) Neighbor Cell RSRP1 per PCI (Range: -140dBm to -44dBm) Neighbor Cell RSRQ per PCI (Range: -30dB to 0 dB) Neighbor Cell RSRQ0 per PCI (Range: -30dB to 0 dB) Neighbor Cell RSRQ1 per PCI (Range: -30dB to 0 dB) Neighbor Cell RSSI per PCI (Range: -140dBm to -44dBm) Neighbor Cell RSSI0 per PCI (Range: -140dBm to -44dBm) Neighbor Cell RSSI1 per PCI (Range: -140dBm to -44dBm) PCI with RSRP strength from top 1 to 20 from Neighbor Cell Top 1 to 20 RSRP from Neighbor Cell Top 1 to 20 RSRP0 from Neighbor Cell Top 1 to 20 RSRP1 from Neighbor Cell Top 1 to 20 RSRQ from Neighbor Cell

Neighbor Cell> Neighbor RSRQ

RSRQ>PCI# RSRQ0>PCI# RSRQ1>PCI#

Neighbor Cell> Neighbor RSSI

RSSI>PCI# RSSI0>PCI# RSSI1>PCI#

Neighbor Cell> Top Set> Top#

PCI RSRP RSRP0 RSRP1 RSRQ

XCAP-LTE Analyzer Parameter Description/Ed.04

RSRQ0 RSRQ1 RSSI RSSI0 RSSI1 All Set> All RSRP RSRP>PCI# RSRP0>PCI# RSRP1>PCI# All Set> All RSRQ RSRQ>PCI# RSRQ0>PCI# RSRQ1>PCI# All Set> All RSSI RSSI>PCI# RSSI0>PCI# RSSI1>PCI# All Set> Cell State Cell State per PCI - Serving - Neighbor Top Set> Top# PCI RSRP RSRP0 RSRP1 RSRQ RSRQ0 RSRQ1 RSSI RSSI0 RSSI1

Top 1 to 20 RSRQ0 from Neighbor Cell Top 1 to 20 RSRQ1 from Neighbor Cell Top 1 to 20 RSSI from Neighbor Cell Top 1 to 20 RSSI0 from Neighbor Cell Top 1 to 20 RSSI1 from Neighbor Cell RSRP per PCI RSRP0 per PCI RSRP1 per PCI RSRQ per PCI RSRQ0 per PCI RSRQ1 per PCI RSSI per PCI RSSI0 per PCI RSSI1 per PCI

PCI with RSRP strength from top 1 to 20 from All Set Top 1 to 20 RSRP from All Set Top 1 to 20 RSRP0 from All Set Top 1 to 20 RSRP1 from All Set Top 1 to 20 RSRQ from All Set Top 1 to 20 RSRQ0 from All Set Top 1 to 20 RSRQ1 from All Set Top 1 to 20 RSSI from All Set Top 1 to 20 RSSI0 from All Set Top 1 to 20 RSSI1 from All Set Top 1 to 20 Cell State from All Set

Cell State

- Serving - Neighbor

Channel Quality Info

Parameter

Description

Copyright by Accuver Ltd.

Page 53

Tx Mode

Transmission Mode 0 TM_INVALID 1 TM_SINGLE_ANT_PORT0 2 TM_TD_RANK1 3 TM_OL_SM 4 TM_CL_SM 5 TM_MU_MIMO 6 TM_CL_RANK1_PC 7 TM_SINGLE_ANT_PORT5

PUCCH Reporting Mode

PUCCH Reporting Mode 0 MODE_1_0 1 MODE_1_1 2 MODE 2_0 3 MODE 2_1

PUSCH Reporting Mode

PUSCH Reporting Mode 0 MODE_APERIODIC_RM12 1 MODE_APERIODIC_RM20 2 MODE_APERIODIC_RM22 3 MODE_APERIODIC_RM30 4 MODE_APERIODIC_RM31

Rank Index

Rank Index 0 Rank 1 1 Rank 2

WideBand CQI CW0 WideBand CQI CW1 WideBand PMI

Wideband CQI for CW0 (Range: 0 ~ 15) Wideband CQI for CW1 (Range: 0 ~ 15) WideBand PMI Range: 015 for 4 Tx, Rank 1 and 2 Range: 01 for 2 Tx, Rank 2 Range: 03 for 1 or 2 Tx, Rank 1

ML1 Downlink Info

Parameter RB Num MCS Idx0 MCS Idx1 Modulation Idx0 Rate Number of DL Resource Blocks DL MCS Index0 DL MCS Index1 QPSK 16QAM 64QAM Modulation Idx1 Rate QPSK 16QAM

Description

QPSK Num/(QPSK Num+16QAM Num+64QAM Num)*100 in TB[0] 16QAM Num/(QPSK Num+16QAM Num+64QAM Num)*100 in TB[0] 64QAM Num/(QPSK Num+16QAM Num+64QAM Num)*100 in TB[0] QPSK Num/(QPSK Num+16QAM Num+64QAM Num)*100 in TB[1] 16QAM Num/(QPSK Num+16QAM Num+64QAM Num)*100 in TB[1]

XCAP-LTE Analyzer Parameter Description/Ed.04

64QAM

64QAM Num/(QPSK Num+16QAM Num+64QAM Num)*100 in TB[1]

ML1 Uplink Info

Parameter RB Num MCS Idx Modulation Idx Rate Number of UL Resource Blocks UL MCS Index QPSK 16QAM 64QAM

Description

QPSK Num/(QPSK Num+16QAM Num+64QAM Num)*100 16QAM Num/(QPSK Num+16QAM Num+64QAM Num)*100 64QAM Num/(QPSK Num+16QAM Num+64QAM Num)*100

Random Access Procedure

Parameter Random Access Request(MSG1)> Preamble Sequence Random Access Request(MSG1)> Physical Root Index Random Access Request(MSG1)> Cyclic Shift Random Access Request(MSG1)> PRACH Tx Power Random Access Request(MSG1)> Beta PRACH Random Access Request(MSG1)> Frequency Resource Offset Random Access Request(MSG1)> Preamble Format Random Access Request(MSG1)> Duplex Mode System Duplex Mode 0: FDD 1: TDD N_ra_prb (Range is 0 to 104) Beta PRACH (Range is 0 to 2047) Cyclic Shift Preamble Sequence Index.

Description

Physical Root Sequence Index corresponding to Preamble Sequence

PRACH Transmit Power (Range is -112 dBm to 23 dBm)

Preamble format (based on PRACH configuration parameter signaled).

Copyright by Accuver Ltd.

Page 55

Random Access Request(MSG1)> RA Request Timing SFN Random Access Request(MSG1)> RA Request Timing Sub-Fn Random Access Request(MSG1)> RA Response Window Start SFN Random Access Request(MSG1)> RA Response Window Start Sub-Fn Random Access Request(MSG1)> RA Response Window End SFN Random Access Request(MSG1)> RA Response Window End Sub-Fn Random Access Request(MSG1)> RARNTI Random Access Request(MSG1)> Random Access Resource for TDD t_1_ra t_0_ra f_ra Frequency resource index 0x0: Resource reoccurring in all radio frames, 0x1: Resource reoccurring in all even radio frames, 0x2: Resource reoccurring in all odd radio frames 0x0: Random access resource located in first half frame 0x1: random access resource is located in second half frame UL subframe number where preamble starts 0x0: 0 t_2_ra 0x1: 1 0x2: 2 0x3: * for preamble format 4 RA RNTI based on MSG1 timing Random Access Response Window End - Subframe number Random Access Response Window End - System frame number Random Access Response Window Start - Subframe number Random Access Response Window Start - System frame number Random Access Request Timing - Subframe number Random Access Request Timing - System frame number

XCAP-LTE Analyzer Parameter Description/Ed.04

Density per 10 ms 0x0: 0.5 0x1: 1 d_ra 0x2: 2 0x3: 3 0x4: 4 0x5: 5 0x6: 6 Random Access Response(MSG2)> SFN Random Access Response(MSG2)> Sub-Fn Random Access Response(MSG2)> Timing Advance Random Access Response(MSG2)> RACH Procedure Type Random Access Response(MSG2)> RACH Procedure Mode Random Access Response(MSG2)> RNTI Type 0x0 Contention free 0x1 Contention based 0x0 Initial access 0x1 Connected mode RACH procedure 0x0 C_RNTI 0x1 SPS_RNTI 0x2 P_RNTI 0x3 RA_RNTI 0x4 TEMP_C_RNTI 0x5 SI_RNTI 0x6 TPC_PUSCH_RNTI 0x7 TPC_PUCCH_RNTI 0x8 MBMS RNTI Random Access Response(MSG2)> RNTI Value UE Identification(MSG3)> TPC UE Identification(MSG3)> MSC UE Identification(MSG3)> RIV Resource Indicator Value Modulation and Coding Scheme TPC command to be applied to MSG3 transmission RNTI value Timing Advance Value Random Access Response Timing - Subframe number Random Access Response Timing - System frame number

Copyright by Accuver Ltd.

Page 57

UE Identification(MSG3)> CQI Enable UE Identification(MSG3)> UL Delay UE Identification(MSG3)> Hopping Flag UE Identification(MSG3)> SFN UE Identification(MSG3)> Sub-Fn UE Identification(MSG3)> Starting RB Num UE Identification(MSG3)> RB Num UE Identification(MSG3)> TB Size Index UE Identification(MSG3)> Modulation Type UE Identification(MSG3)> Redundancy Version index UE Identification(MSG3)> HARQ ID Contention Resolution(MSG4)> SFN Contention Resolution(MSG4)> Sub-Fn

0x0 Disabled 0x1 Enabled 0x0 Do not delay 0x1 Delay UL transmission 0x0 Hopping is OFF 0x1 Hopping is ON

System frame number of MSG3

Subframe number of MSG3

Starting resource block number of the received grant

Total number of resource blocks allocated in the grant

Transport block size can be determined based on the Transport Block Size Index and Number of Resource Blocks by the log code parser 0x0 BPSK 0x1 QPSK 0x2 16QAM 0x3 64QAM

Redundancy Version Index

ID of the HARQ process on which MSG3 transmission was scheduled

System frame number of MSG4

Subframe number of MSG4

XCAP-LTE Analyzer Parameter Description/Ed.04

Contention Resolution(MSG4)> Contention Result Contention Resolution(MSG4)> UL ACK Timing SFN Contention Resolution(MSG4)> UL ACK Timing Sub-Fn

0x0 Contention failed 0x1 Contention passed

System frame number of MSG4 ACK

Subframe number of MSG4 ACK

Radio Link Monitoring Info

Parameter Out of Sync BLER

Description Out of Sync BLER, calculated from the measured SNR. The out_sync BLER corresponds to the BLER if the actual transmission parameters equal to the parameters specified in Spec for out_sync. x / (1<<15) * 100(%)

In Sync BLER

In Sync BLER, calculated from the measured SNR. The in_sync BLER corresponds to the BLER if the actual transmission parameters equal to the parameters specified in Spec for in_sync. x / (1<<15) * 100(%)

NAS ESM Bearer Context Info

Parameter Context Type Bearer ID Bearer State 0 - Default 1 - Dedicated ID of the bearer context 0 INACTIVE 1 ACTIVE 2 ACTIVE_PENDING 3 MODIFY Connection ID SDF ID LBI RB ID

Description

Connection ID associated with the bearer Service Data Flow ID Linked Bearer Identity Radio bearer ID that corresponds to the EPS Bearer ID of the context

Copyright by Accuver Ltd.

Page 59

EPS QoS

Quality of Service Class Identifier 0 0 0 0 0 0 0 0 Reserved 0 0 0 0 0 0 0 1 QCI 1 0 0 0 0 0 0 1 0 QCI 2 0 0 0 0 0 0 1 1 QCI 3 0 0 0 0 0 1 0 0 QCI 4 0 0 0 0 0 1 0 1 QCI 5 0 0 0 0 0 1 1 0 QCI 6 QCI 0 0 0 0 0 1 1 1 QCI 7 0 0 0 0 1 0 0 0 QCI 8 0 0 0 0 1 0 0 1 QCI 9 0 0 0 0 1 0 1 0 Reserved to 01111111 1 0 0 0 0 0 0 0 Operator-specific QCIs to 11111110 1 1 1 1 1 1 1 1 Reserved MBR for UL MBR for DL GBR for UL GBR for DL MBR for UL Ext MBR for DL Ext GBR for UL Ext GBR for DL Ext Maximum bit rate for uplink (refer section 9.9.4.3 of the spec TS 24.301) Maximum bit rate for downlink (refer section 9.9.4.3 of the spec TS 24.301) Guaranteed bit rate for uplink (refer section 9.9.4.3 of the spec TS 24.301) Guaranteed bit rate for downlink (refer section 9.9.4.3 of the spec TS 24.301) Maximum bit rate for uplink (extended) (refer section 9.9.4.3 of the spec TS 24.301) Maximum bit rate for downlink (extended) (refer section 9.9.4.3 of the spec TS 24.301) Guaranteed bit rate for uplink (extended) (refer section 9.9.4.3 of the spec TS 24.301) Guaranteed bit rate for downlink (extended) (refer section 9.9.4.3 of the spec TS 24.301)

NAS EMM State

Parameter

Description

XCAP-LTE Analyzer Parameter Description/Ed.04

EMM State

Current EMM state EMM_NULL 0 EMM_DEREGISTERED 1 EMM_REGISTERED_INITIATED 2 EMM_REGISTERED 3 EMM_TRACKING_AREA_UPDATING_INITIATED 4 EMM_SERVICE_REQUEST_INITIATED 5 EMM_DEREGISTERED_INITIATED 6 EMM_INVALID_STATE 7

EMM Substate MCC MNC GUTI Info

Current EMM sub-state MCC part of the PLMN MNC part of the PLMN UE ID MCC MNC MME Group ID MME Code M-TMSI 1: IMSI_ID, 6: GUTI_ID MCC part of the PLMN MNC part of the PLMN MME_GROUP_ID interpret/display as an array of bytes. MME Code M_TMSI interpret/display as an array of bytes.

RRC Serving Cell Info

Parameter PCI EARFCN(DL) EARFCN(UL) Frequency(DL) Frequency(UL) Bandwidth(DL) Physical cell ID Downlink frequency as E-ARFCN Uplink frequency as E-ARFCN

Description

Downlink frequency of the serving cell (Unit: MHz) Uplink frequency of the serving cell (Unit: MHz) Downlink bandwidth 6 1.4 MHz 15 3 MHz 25 5 MHz 50 10 MHz 75 15 MHz 100 20 MHz

Copyright by Accuver Ltd.

Page 61

Bandwidth(UL)

Uplink bandwidth 6 1.4 MHz 15 3 MHz 25 5 MHz 50 10 MHz 75 15 MHz 100 20 MHz

Cell ID TAC Band Indicator MCC MNC Allowed Access

Cell Identity received in SIB1 Tracking area code Frequency band indicator MCC part of the PLMN MNC part of the PLMN Allowed access on the cell based on network select mode indicated by NAS 0 Full 1 Limited

RRC PLMN Search Info

Parameter PLMN Search Request> NETWORK_SELECT_ MODE PLMN Search Request> SEARCH_TYPE

Description Allowed access on the cell based on network select mode indicated by NAS 1 - Automatic 2 - Manual Service Search type indicated by NAS 1 None 2 Background Automatic 3 - Background Manual

PLMN Search Request> RAT_LIST> List[x] PLMN Search Request> PLMN_LIST> List[x] PLMN Search Response> Active RAT

1 GSM 2 WCDMA 3 LTE MCC and MNC Active RAT 1 GSM 2 WCDMA 3 LTE

PLMN Search Response> SEARCH_STATUS

1 Completed 2 Timed out 3 Abort Confirmation 4 - Aborted

XCAP-LTE Analyzer Parameter Description/Ed.04

PLMN Search Response> PLMN_LIST> List[x] MCC and MNC

ML1 Serving Cell Info(Acquisition)

Parameter DL Bandwidth SFN EARFCN Frequency Serving Cell PCI PBCH Decode Result PHICH Duration PHICH Resource

Description Downlink bandwidth of the serving cell System frame number when PBCH was decoded EARFCN of the serving cell Frequency of the serving cell (Unit: MHz) Cell ID of the serving cell 0x1 Success 0x0 Failure 0 PHICH_NORMAL 1 PHICH_EXTENDED HICH group multiplier 0 1/6 1 1/2 21 32

PSS Correlation SSS Correlation PBCH Reference Timing MIB Payload Frequency Offset No. of Ant

PSS correlation value of serving cell SSS correlation value of serving cell PBCH reference timing Raw PBCH payload Frequency offset estimate based upon the PBCH decode. 0x0 1 antenna 0x1 2 antennas 0x2 4 antennas 0x3 Invalid

Physical Throughput

Parameter PDSCH Throughput> Total PDSCH Throughput> HARQ[#] PUSCH Throughput> Total

Description PDSCH Throughput>HARQ[x] (Unit: Mbps) (within 1 second pdsch_tb_size)*8/(1sec)/(10^6) (Unit: Mbps) PUSCH Throughput>HARQ[x] (Unit: Mbps)

Copyright by Accuver Ltd.

Page 63

PUSCH Throughput> HARQ[#]

(within 1 second pusch_tb_size)*8/(1sec)/(10^6) (Unit: Mbps)

MAC Throughput

Parameter DL MAC Throughput> Total DL MAC Throughput> HARQ[#] UL MAC Throughput> Total UL MAC Throughput> HARQ[#]

Description DL MAC Throughput>HARQ[x] (Unit: Mbps) (within 1 second MAC DL TBS)*8/(1 sec)/(10^6) (Unit: Mbps) UL MAC Throughput>HARQ[x] (Unit: Mbps) (within 1 second MAC UL GRANT(BYTE))*8/(1 sec)/(10^6) (Unit: Mbps)

RLC Throughput

Parameter DL RLC Throughput> Total DL RLC Throughput> RB CFG IDX[#] UL RLC Throughput> Total UL RLC Throughput> RB CFG IDX[#]

Description DL RLC Throughput>RB CFG IDX[x] (Unit: Mbps) (RLC Rx Byte)*8/(Timestamp)/(10^6) (Unit: Mbps) Where, RLC Rx Byte = DATA_PDU_BYTES + STATUS_RXED_BYTES + INVALID_PDU_BYTES UL RLC Throughput>RB CFG IDX[x] (Unit: Mbps) (RLC Tx Byte)*8/(Timestamp)/(10^6) (Unit: Mbps) Where, RLC Tx Byte = NUM_NEW_DATA_PDU_BYTES + NUM_CTRL_PDU_BYTES_Tx + NUM_RETX_PDU_BYTES

PDCP Throughput

Parameter DL PDCP Throughput> Total DL PDCP Throughput> RB CFG IDX[#] UL PDCP Throughput> Total

Description DL PDCP Throughput>RB CFG IDX[x] (Unit: Mbps) (PDCP Rx Byte)*8/(Timestamp)/(10^6) (Unit: Mbps) Where, PDCP Rx Byte = NUM_DATA_PDU_RX_BYTES + NUM_CONTROL_PDU_RX_BYTES + NUM_PDU_INVALID_BYTES UL PDCP Throughput>RB CFG IDX[x] (Unit: Mbps)

XCAP-LTE Analyzer Parameter Description/Ed.04

UL PDCP Throughput> RB CFG IDX[#]

(PDCP Tx Byte)*8/(Timestamp)/(10^6) (Unit: Mbps) Where, PDCP Tx Byte = NUM_DATA_PDU_TX_BYTES + NUM_CONTROL_PDU_TX_BYTES - NUM_DISCARD_SDU_BYTES

Copyright by Accuver Ltd.

Page 65

GCT
L1 Status Info
L1 status information shows physical layer status such as channel setup status, serving cell information, PCH DRX and measurement periodicity, etc. Parameter State Info> Main State Physical layer main state 0: DEACTIVATED 1: IDLE 2: CONNECTED State Info> BCH BCH Channel State 0: RELEASE 1: SETUP State Info> PCH PCH Channel State 0: RELEASE 1: SETUP State Info> DL-SCH for BCCH State Info> UL/DL-SCH and RACH Serving Cell Info> PCI Serving Cell Info> DL Freq Serving Cell Info> UL Freq Serving Cell Info> DL Bandwidth Serving Cell Info> UL Bandwidth Serving Cell Info> Antenna Num PCH DRX Period DL-SCH for BCCH Channel State 0: RELEASE 1: SETUP UL/DL-SCH and RACH Channel State 0: RELEASE 1: SETUP Cell identifier Downlink frequency Uplink frequency Downlink bandwidth (Unit : RB) Uplink bandwidth (Unit : RB) Number of downlink transmit antenna PCH DRX periodicity 0: 0.32sec 1: 0.64sec 2: 1.28sec 3: 2.56sec 255: OFF Description

XCAP-LTE Analyzer Parameter Description/Ed.04

Serving Cell Signal Quality Info


The serving cell quality information shows SNR of reference signal (RS SNR) and received power of reference signal (RS RSSI). Parameter RS RSSI 0 RS RSSI 1 RS RSSI RS SNR Description received power 0 of reference signal received power 1 of reference signal total received power of reference signal (rs_rssi[0] + rs_rssi[1])/2 reference signal power and noise power for a resource element containing RS are estimated. 10*log10{ (signal_pwr[0] + signal_pwr [1])/ (noise_pwr[0] + noise_pwr [1])})

Tx Power Info
Time sync report log shows the time sync status of UE. Parameter PUCCH Tx Power PUSCH Tx Power PRACH Tx Power Total Tx Power Description PUSCH average UE output power in dBm PUCCH average UE output power in dBm PRACH instantaneous UE output power in dBm 1 frame based average UE output power in dBm

RACH Info
Parameter Frame Num TTI Preamble Format Speed Mode Root Seq Cyclic Shift Zero Correlation Zone Retrans Num Tx Power Start frame number Start subframe number 0: Format 0, 1: Format 1, 2: Format2, 3: Format3 0: normal speed, 1: high speed Root Sequence Cyclic Shift per Use Zero Correlation Zone (Ncs value 59) Retransmit number RACH transmit power Description

Timing Adjustment Info


Tx Timing adjustment log shows the TA position. Parameter Rx SFN Rx TTI Received frame number Received subframe number Description

Copyright by Accuver Ltd.

Page 67

NTA

Timing advance command In case of random access response : 11bit for NTA In other case : 6bit for NTA (TA = 0, 1, 2,..., 63)

Accum TA

Accumulate timing advance command

Cell Info
Cell Information display cell lists which are collected from Mp Searcher and Cell Searcher. Parameter INTRA>SYNC> RSRP INTRA>SYNC> RSRQ INTRA>SYNC> RSSI INTRA>SYNC> FrameBound INTRA>SYNC> CPLength Description Reference Signal Received Power of Intra cell which is known the sync position. Reference Signal Received Quality of Intra cell which is known the sync position Received Power of Intra cell which is known the sync position Cell frame boundary in Intra Sync CP length in Intra Sync 0: Unknown 1 : Normal CP 2 : Extended CP INTRA>SYNC> DL Earfcn INTRA>SYNC> Top Set Earfcn number in Intra Sync PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn INTRA>ASYNC> RSRP INTRA> ASYNC> RSRQ INTRA> ASYNC> RSSI INTRA> ASYNC> FrameBound INTRA> ASYNC> CPLength PCI with RSRP strength from top 1 to 20 from Intra Sync Cell Top 1 to 20 RSRP from Intra Sync Cell Top 1 to 20 RSRQ from Intra Sync Cell Top 1 to 20 RSSI from Intra Sync Cell Top 1 to 20 FrameBound from Intra Sync Cell Top 1 to 20 CPLength from Intra Sync Cell Top 1 to 20 DL Earfcn from Intra Sync Cell

Reference Signal Received Power of Intra cell which is unknown the sync position. Reference Signal Received Quality of Intra cell which is unknown the sync position Received Power of Intra cell which is unknown the sync position Cell frame boundary in Intra Async CP length in Intra Async 0: Unknown 1 : Normal CP 2 : Extended CP

INTRA> ASYNC> DL Earfcn INTRA> ASYNC > Top Set

Earfcn number in Intra Async PCI RSRP PCI with RSRP strength from top 1 to 20 from Intra Async Cell Top 1 to 20 RSRP from Intra Async Cell

XCAP-LTE Analyzer Parameter Description/Ed.04

RSRQ RSSI FrameBound CPLength DL Earfcn INTRA>DETECT> RSRP INTRA> DETECT> RSRQ INTRA> ASYNC> RSSI INTRA> DETECT> FrameBound INTRA> DETECT> CPLength

Top 1 to 20 RSRQ from Intra Async Cell Top 1 to 20 RSSI from Intra Async Cell Top 1 to 20 FrameBound from Intra Async Cell Top 1 to 20 CPLength from Intra Async Cell Top 1 to 20 DL Earfcn from Intra Async Cell

Reference Signal Received Power of Intra cell which is newly detected at this search. Reference Signal Received Quality of Intra cell which is newly detected at this search Received Power of Intra cell which is newly detected at this search Cell frame boundary in Intra Detected CP length in Intra Detected 0: Unknown 1 : Normal CP 2 : Extended CP

INTRA> DETECT> DL Earfcn INTRA> DETECT > Top Set

Earfcn number in Intra Detected PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn PCI with RSRP strength from top 1 to 20 from Intra Detect Cell Top 1 to 20 RSRP from Intra Detect Cell Top 1 to 20 RSRQ from Intra Detect Cell Top 1 to 20 RSSI from Intra Detect Cell Top 1 to 20 FrameBound from Intra Detect Cell Top 1 to 20 CPLength from Intra Detect Cell Top 1 to 20 DL Earfcn from Intra Detect Cell

INTER>SYNC> RSRP INTER>SYNC> RSRQ INTER>SYNC> RSSI INTER>SYNC> FrameBound INTER>SYNC> CPLength

Reference Signal Received Power of Inter cell which is known the sync position. Reference Signal Received Quality of Inter cell which is known the sync position Received Power of Inter cell which is known the sync position Cell frame boundary in Inter Sync CP length in Inter Sync 0: Unknown 1 : Normal CP 2 : Extended CP

INTER>SYNC> DL Earfcn INTER >SYNC> Top Set

Earfcn number in Inter Sync PCI RSRP RSRQ RSSI FrameBound PCI with RSRP strength from top 1 to 20 from Inter Sync Cell Top 1 to 20 RSRP from Inter Sync Cell Top 1 to 20 RSRQ from Inter Sync Cell Top 1 to 20 RSSI from Inter Sync Cell Top 1 to 20 FrameBound from Inter Sync Cell

Copyright by Accuver Ltd.

Page 69

CPLength DL Earfcn INTER>ASYNC> RSRP INTER> ASYNC> RSRQ INTER> ASYNC> RSSI INTER> ASYNC> FrameBound INTER> ASYNC> CPLength

Top 1 to 20 CPLength from Inter Sync Cell Top 1 to 20 DL Earfcn from Inter Sync Cell

Reference Signal Received Power of Inter cell which is unknown the sync position. Reference Signal Received Quality of Inter cell which is unknown the sync position Received Power of Inter cell which is unknown the sync position Cell frame boundary in Inter Async CP length in Inter Async 0: Unknown 1 : Normal CP 2 : Extended CP

INTER> ASYNC> DL Earfcn INTER > ASYNC > Top Set

Earfcn number in Inter Async PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn PCI with RSRP strength from top 1 to 20 from Inter Async Cell Top 1 to 20 RSRP from Inter Async Cell Top 1 to 20 RSRQ from Inter Async Cell Top 1 to 20 RSSI from Inter Async Cell Top 1 to 20 FrameBound from Inter Async Cell Top 1 to 20 CPLength from Inter Async Cell Top 1 to 20 DL Earfcn from Inter Async Cell

INTER>DETECT> RSRP INTER> DETECT> RSRQ INTER> ASYNC> RSSI INTER> DETECT> FrameBound INTER> DETECT> CPLength

Reference Signal Received Power of Inter cell which is newly detected at this search. Reference Signal Received Quality of Inter cell which is newly detected at this search Received Power of Inter cell which is newly detected at this search Cell frame boundary in Inter Detected CP length in Inter Detected 0: Unknown 1 : Normal CP 2 : Extended CP

INTER> DETECT> DL Earfcn INTER > DETECT > Top Set

Earfcn number in Inter Detected PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn PCI with RSRP strength from top 1 to 20 from Inter Detect Cell Top 1 to 20 RSRP from Inter Detect Cell Top 1 to 20 RSRQ from Inter Detect Cell Top 1 to 20 RSSI from Inter Detect Cell Top 1 to 20 FrameBound from Inter Detect Cell Top 1 to 20 CPLength from Inter Detect Cell Top 1 to 20 DL Earfcn from Inter Detect Cell

XCAP-LTE Analyzer Parameter Description/Ed.04

All Set Top Set

All Cell RSRP/RSRQ/RSSI/FrameBound /CPLength/DL Earfcn/Cell State per PCI PCI RSRP RSRQ RSSI FrameBound CPLength DL Earfcn PCI with RSRP strength from top 1 to 20 from All Cell Top 1 to 20 RSRP from All Cell Top 1 to 20 RSRQ from All Cell Top 1 to 20 RSSI from All Cell Top 1 to 20 FrameBound from All Cell Top 1 to 20 CPLength from All Cell Top 1 to 20 DL Earfcn from All Cell Top 1 to 20 Cell State from All Cell - Intra Sync - Intra Async Cell State - Intra Detect - Inter Sync - Inter Async - Inter Detect

Search Result
Search Result log shows Mp Search result and Cell Search result. Parameter MP Searcher Cell Searcher> Dominant PCI Cell Searcher> Dominant Cell Srch Energy Cell Searcher> PCI# Earfcn Used Cell Searcher Num Cell Search Energy, PCIG, Half Frame Idx and CP Length per PCI (PCIG: 0 ~ 167, PCI: 0 ~ 503) EARFCN number Num of Used Cell Searcher Dominant Cell Search Energy Description Mp Searcher Dominant Energy and Mp Searcher position per PCIS (PCIS: 0,1 or 2) PCI with Dominant Cell Search Energy

Channel Info
The channel information shows no antenna in the 2x2 MIMO channel. Parameter Tx Correlation> Freq Total Band(Avg) Tx Correlation> Freq Sub Band x Description Tx Correlation in Total Band(Sub Band 1 ~ 30) Tx Correlation per Sub Band

Copyright by Accuver Ltd.

Page 71

Rx Correlation> Freq Total Band(Avg) Rx Correlation> Freq Sub Band x H00 (Real)> Freq Sub Band x H00 (Imaginary)> Freq Sub Band x H01 (Real)> Freq Sub Band x H01 (Imaginary)> Freq Sub Band x H10 (Real)> Freq Sub Band x H10 (Imaginary)> Freq Sub Band x H11 (Real)> Freq Sub Band x H11 (Imaginary)> Freq Sub Band x

Rx Correlation in Total Band(Sub Band 1 ~ 30) Tx Correlation per Sub Band H00 (Real value) per Sub Band H00 (Imaginary value) per Sub Band H00 (Real value) per Sub Band H00 (Imaginary value) per Sub Band H00 (Real value) per Sub Band H00 (Imaginary value) per Sub Band H00 (Real value) per Sub Band H00 (Imaginary value) per Sub Band

CQI Info
The wideband CQI information shows measured CQI of wideband in the UE. The sub-band CQI information shows the CQI (channel quality information) of sub-bands. The sub-band is defined a unit for a group of resource elements used for reporting sub-band CQI. Parameter Rank Ratio> Instant Rank Ratio> Cumulative CQI(Wideband)> Rank1 CQI CQI(Wideband)> Rank2 CW0 CQI CQI(Wideband)> Rank2 CW1 CQI CQI(Wideband)> Rank1 PMI CQI(Wideband)> Rank2 PMI CQI(Subband)> Rank1 CQI Instant Rank Ratio (Range 0 ~ 1) Cumulative Rank Ratio (Range 0 ~ 1) Rank1 wide band CQI Rank2 wide band CQI for CW0 Rank2 wide band CQI for CW1 Rank1 wide band PMI Rank2 wide band PMI Rank1 sub band CQI Description

XCAP-LTE Analyzer Parameter Description/Ed.04

CQI(Subband)> Rank2 CW0 CQI CQI(Subband)> Rank2 CW1 CQI CQI(Subband)> Rank1 PMI CQI(Subband)> Rank2 PMI

Rank2 sub band CQI for CW0 Rank2 sub band CQI for CW1 Rank1 sub band PMI Rank2 sub band PMI

Multi-paths Profile
This information shows the channel impulse response of reference signals in the time domain. Parameter Serving PCI Ref EsNo Serving cell ID (0~503) The reference EsNo is the detected RS SNR in the reference position. RS power metric of reference path. EsNo is calculated by computing 10*log10(RS power metric/noise power metric) Ref Timing Path Info[x]> EsNo Path Info[x]> Time Index The reference timing gives the information of reference cell timing of demodulation. Reference timing of serving cell. The resolution is Ts in a frame RS power metric of this path Timing offset from reference timing (Ts resolution) Description

PBCH BLER
PBCH BLER displays how much transport blocks get CRC_NOK about total received transport blocks. Parameter Instant Cumulative Instant PBCH BLER (bler_info.err_nums / bler_info.total_nums) * 100 Cumulative PBCH BLER Description

PDSCH BLER
PDSCH BLER displays how much transport blocks get CRC_NOK about total received transport blocks. Parameter Instant> All Instant PDSCH Total BLER ((bler_info[0].err_nums + bler_info[1].err_nums) / (bler_info[0].total_nums + bler_info[1].total_nums)) * 100 Instant> Codeword #0 Instant> Codeword #1 Cumulative> All Instant PDSCH Codeword0 BLER (bler_info[0].err_nums / bler_info[0].total_nums) * 100 Instant PDSCH Codeword1 BLER (bler_info[1].err_nums / bler_info[1].total_nums) * 100 Cumulative PDSCH Total BLER Description

Copyright by Accuver Ltd.

Page 73

Cumulative> Codeword #0 Cumulative> Codeword #1

Cumulative PDSCH Codeword0 BLER Cumulative PDSCH Codeword1 BLER

PDCCH Detection Rate


UE cant calculate PDCCH BLER because UE doesnt know when eNode-B sends its PDCCH. In other words, UE detects PDCCH blindly. So, UE DM supports this item similar with PDCCH BLER. Parameter DCI 0 DCI 1 DCI 1a DCI 1b DCI 1c DCI 2 DCI 2a DCI 3 DCI 3a The number of detection for DCI#0 The number of detection for DCI 1 The number of detection for DCI 1a The number of detection for DCI 1b The number of detection for DCI 1c The number of detection for DCI 2 The number of detection for DCI 2a The number of detection for DCI 3 The number of detection for DCI 3a Description

DL Grant & UL Ack/Nack Status Info(Improved)


DL Grant & UL ACK/NACK Status(Improved) displays DL grant regardless any DCI format in every TTI. According to TS36.212, each DCI format has the specific fields, not all, and the unnecessary fields are displayed to the blank. Additionally, UL_ACK/NACK, CFI, and DCI_3/3A payload will be included in this item. Parameter SFN TTI DCI Format> Count DCI Format> Rate TM Scheme SFN value TTI value DCI 1 Num/ DCI 1A Num/ DCI 1B Num/ DCI 1C Num/ DCI 2 Num/ DCI 2A Num/ DCI 3 Num/ DCI 3A Num/ N/A Num DCI 1 Rate/ DCI 1A Rate/ DCI 1B Rate/ DCI 1C Rate/ DCI 2 Rate/ DCI 2A Rate/ DCI 3 Rate/ DCI 3A Rate/ N/A Rate transmission scheme 0:"SING-ANT(P0)",1:"SING-ANT(P5)",2:"TRANSDIV",3:"LARGE-CDD",4:"CLOSE-SM",5:"MU-MIMO" TPC RB Num MCS> CW0> MCS(Idx) MCS> CW0> QPSK Rate TPC Resource Block Number CW0 MCS CW0 QPSK Rate Description

XCAP-LTE Analyzer Parameter Description/Ed.04

MCS> CW0> 16 QAM Rate MCS> CW0> 64 QAM Rate MCS> CW1> MCS(Idx) MCS> CW1> QPSK Rate MCS> CW1> 16 QAM Rate MCS> CW1> 64 QAM Rate NDI> CW0> New Data Num NDI> CW0> Retrans Data Num NDI> CW0> New Data Rate NDI> CW1> New Data Num NDI> CW1> Retrans Data Num NDI> CW1> New Data Rate UL ACK/NACK> CW0> ACK Count UL ACK/NACK> CW0> NACK Count UL ACK/NACK> CW0> DTX Count UL ACK/NACK> CW0> ACK Rate UL ACK/NACK> CW0> NACK Rate UL ACK/NACK> CW0> DTX Rate UL ACK/NACK> CW1> ACK Count UL ACK/NACK> CW1> NACK Count UL ACK/NACK> CW1> DTX Count UL ACK/NACK> CW1> ACK Rate

CW0 16 QAM Rate CW0 64 QAM Rate CW1 MCS CW1 QPSK Rate CW1 16 QAM Rate CW1 64 QAM Rate CW0 NDI (NDI field = 1) CW0 NDI (NDI field = 0) New Data Num/(Retrans Data Num+New Data Num)*100 in CW0 CW1 NDI (NDI field = 1) CW1 NDI (NDI field = 0) New Data Num/(Retrans Data Num+New Data Num)*100 in CW1 CW0 UL ACK result CW0 UL NACK result CW0 UL DTX result ACK Count/(ACK Count+NACK Count+DTX Count)*100 in CW0 NACK Count/(ACK Count+NACK Count+DTX Count)*100 in CW0 DTX Count/(ACK Count+NACK Count+DTX Count)*100 in CW0 CW1 UL ACK result CW1 UL NACK result CW1 UL DTX result ACK Count/(ACK Count+NACK Count+DTX Count)*100 in CW1

Copyright by Accuver Ltd.

Page 75

UL ACK/NACK> CW1> NACK Rate UL ACK/NACK> CW1> DTX Rate DCI 3(Mode)> DCI 3/3A Value(CW0) DCI 3(Mode)> DCI 3/3A Value(CW1)

NACK Count/(ACK Count+NACK Count+DTX Count)*100 in CW1 DTX Count/(ACK Count+NACK Count+DTX Count)*100 in CW1 CW0 DCI3/3A value CW1 DCI3/3A value

DL Grant & UL Ack/Nack Status Info(Improved)[Detail per TTI]


DL Grant & UL Ack/Nack Status Info(Improved)[Detail per TTI] displays the related information per TTI. Parameter SFN TTI CFI DCI Format SFN value TTI value CFI value DCI format 0:"DCI_1",1:"DCI_1A,2:"DCI_1B",3:"DCI_1C",4:"DCI_2", 5:"DCI_2A",6:"DCI_3",7:"DCI_3A" RNTI RNTI type 0:"C-RNTI",1:"RA-RNTI",2:"P-RNTI",3:"SI-RNTI", 4:"PUCCH",5:"PUSCH",6:"SPSRNTI",7:T-CRNTI TM Scheme transmission scheme 0:"SING-ANT(P0)",1:"SING-ANT(P5)",2:"TRANS- DIV",3:"LARGE-CDD",4:"CLOSESM",5:"MU-MIMO" Distribution Flag Gap Value RA Header Precoding RB Num PMI Confirmation TPC HARQ Number MCS(CW0) NDI(CW0) RV(CW0) MOD Type(CW0) New/Retrans Type(CW0) TB Size(CW0) CRC Result(CW0) distribution flag 0:"LOCAL", 1:"DIST" gap value RA header precoding information Resource Block Number PMI confirmation TPC HARQ number MCS in CW0 NDI in CW0 redundancy version in CW0 modulation type in CW0 new or retransmission type in CW0 transport block size in CW0 CRC result in CW0 Description

XCAP-LTE Analyzer Parameter Description/Ed.04

UL ACK/NACK Result(CW0) DCI 3(CW0) MCS(CW1) NDI(CW1) RV(CW1) MOD Type(CW1) New/Retrans Type(CW1) TB Size(CW1) CRC Result(CW1) UL ACK/NACK Result(CW1) DCI 3(CW1)

UL ACK/NACK result in CW0 DCI3/3A value in CW0 MCS in CW1 NDI in CW1 redundancy version in CW1 modulation type in CW1 new or retransmission type in CW1 transport block size in CW1 CRC result in CW1 UL ACK/NACK result in CW1 DCI3/3A value in CW1

UL Grant & DL Ack/Nack Status Info


UL Grant Info Status log shows get UL Scheduling Grant information to PDCCH. Parameter SFN TTI FH> FH Num FH> No FH Num FH> FH Rate MCS> CQI REQ> MCS(Idx) MCS> No CQI REQ> MCS(Idx) MCS> No CQI REQ> QPSK Rate MCS> No CQI REQ> 16 QAM Rate MCS> No CQI REQ> 64 QAM Rate New Data Num Retrans Data Num New Data Rate TPC CS DMRS DL ACK/NACK> ACK Count SFN value TTI value FH Number No FH Number FH Num/(No FH Num+FH Num)* 100 No CQI Request Modulation and Coding Rate CQI Request Modulation and Coding Rate QPSK Num/(QPSK Num+16QAM Num+64QAM Num)*100 in CQI Request 16QAM Num/(QPSK Num+16QAM Num+64QAM Num)*100 in CQI Request 64QAM Num/(QPSK Num+16QAM Num+64QAM Num)*100 in CQI Request New data indicator (NDI field = 1) New data indicator (NDI field = 0) New Data Num/(Retrans Data Num+New Data Num)*100 Power control of PUSCH Cyclic shift for DMRS DL ACK result Description

Copyright by Accuver Ltd.

Page 77

DL ACK/NACK> NACK Count DL ACK/NACK> DTX Count DL ACK/NACK> ACK Rate DL ACK/NACK> NACK Rate DL ACK/NACK> DTX Rate

DL NACK result DL DTX result ACK Count/(ACK Count+NACK Count+DTX Count)*100 NACK Count/(ACK Count+NACK Count+DTX Count)*100 DTX Count/(ACK Count+NACK Count+DTX Count)*100

UL Grant & DL Ack/Nack Status info[Detail per TTI]


UL Grant & DL Ack/Nack Status info[Detail per TTI] displays the related information per TTI. Parameter SFN TTI TB Size RB Assign FH MCS NDI TPC CS DMRS CQI Request Ind SFN value TTI value Transport Block size Resurce block assingment 0 :No FH 1 :FH Modulation and Coding Rate New data indicator Power control of PUSCH Cyclic shift for DMRS CQI Request Indication 0 : No CQI Request 1 : CQI Request DL ACK/NACK Result 0 :NACK 1 :ACK Description

PDSCH PHY Throughput


PDSCH PHY Throughput has displays how much to get the downlink data in 1sec. Parameter All Codeword #0 Codeword #1 PDSCH PHY Total Throughput (cw_0 + cw_1) / 1000 PDSCH PHY Codeword0 Throughput (cw_0) / 1000 PDSCH PHY Codeword0 Throughput (cw_1) / 1000 Description

XCAP-LTE Analyzer Parameter Description/Ed.04

UL PRB MAP Data Info


This information shows the log of transmit physical resource mapping information. Parameter SFN TTI Bandwidth Channel Type> Count Channel Type> Rate PRACH PUCCH PUSCH SRS PUSCH+SRS PUCCH+SRS Frame number TTI number 0:1.4MHz, 1:3MHz, 2:5MHz, 3:10MHz, 4:15MHz, 5:20MHz DTX/ PRACH/ PUCCH/ PUSCH/ SRS/ PUSCH+SRS/ PUCCH+SRS Count DTX/ PRACH/ PUCCH/ PUSCH/ SRS/ PUSCH+SRS/ PUCCH+SRS Rate RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in PRACH RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in PUCCH RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in PUSCH RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in SRS RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in PUSCH+SRS RB Size/ Even Slot RB Offset/ Odd Slot RB Offset/ SRS RB Size/ SRS RB Offset in PUCCH+SRS Description

PUSCH PHY Throughput


UL Throughput log shows the Uplink data throughput at UE side. Parameter NEW Transmission Total UL Description A number of bits about new transmission per 1 sec (new_bit_nums) / 1000 A number of bits about re-transmission per 1 sec (new_bit_nums + retrans_bit_nums) / 1000

L2 DL Throughput
Parameter PDCP> Total PDCP> RB ID(x) RLC> Total Total Downlink PDCP Throughput (rbId total Byte*8/1000) Downlink PDCP Throughput per RB ID (rbId total Byte*8/1000) Total Downlink RLC Throughput (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM), 4 ~ 5 (UM) Description

Copyright by Accuver Ltd.

Page 79

RLC> AM> Total

Total Downlink RLC AM Throughput (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM)

RLC> AM> RB ID(x)

Downlink RLC AM Throughput per RB ID (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM)

RLC> UM> Total

Total Downlink RLC UM Throughput (rbId total Byte*8/1000) Precondition: index 4 ~ 5 (AM)

RLC> UM> RB ID(x)

Downlink RLC UM Throughput per RB ID (rbId total Byte*8/1000) Precondition: index 4 ~ 5 (AM)

MAC

Downlink MAC Throughput (MacDlTotalBytes*8/1000)

L2 UL Throughput
Parameter PDCP> Total PDCP> RB ID(x) RLC> Total Total Uplink PDCP Throughput (rbId total Byte*8/1000) Uplink PDCP Throughput per RB ID (rbId total Byte*8/1000) Total Uplink RLC Throughput (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM), 4 ~ 5 (UM) RLC> AM> Total Total Uplink RLC AM Throughput (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM) RLC> AM> RB ID(x) Uplink RLC AM Throughput per RB ID (rbId total Byte*8/1000) Precondition: index 1 ~ 3 (AM) RLC> UM> Total Total Uplink RLC UM Throughput (rbId total Byte*8/1000) Precondition: index 4 ~ 5 (AM) RLC> UM> RB ID(x) Uplink RLC UM Throughput per RB ID (rbId total Byte*8/1000) Precondition: index 4 ~ 5 (AM) MAC Uplink MAC Throughput (MacUlTotalBytes*8/1000) Description

PDSCH MAC BLER


This item is for MAC BLER of downlink (PDSCH). Ratio of transport blocks which remain un-

XCAP-LTE Analyzer Parameter Description/Ed.04

acknowledged (CRC failure) after HARQ retransmission divided by total number of initial transmissions received by UE MAC Parameter Instant> All Instant> Codeword #0 Instant> Codeword #1 Cumulative> All Cumulative> Codeword #0 Cumulative> Codeword #1 Instant total MAC BLER ( (cwd0ErrNum/cwd0TBNum) *100 + (cwd1ErrNum/cwd1TBNum) *100 ) / 2 Instant code word #0 MAC BLER (cwd0ErrNum/cwd0TBNum) *100 Instant code word #1 MAC BLER (cwd1ErrNum/cwd1TBNum) *100 Cumulative total MAC BLER Cumulative code word #0 MAC BLER Cumulative code word #1 MAC BLER Description

RLC States Info


This item provides state information of RLC Tx/Rx Entity. Parameter Tx States> RB ID (x)> Mode Tx States> RB ID (x)> State Rx States> RB ID (x)> Mode Rx States> RB ID (x)> State Tx States RLC Mode (AM /UM/TM) Tx States RLC Tx Entity state (NULL/DTR) Rx States RLC Mode (AM /UM/TM) Rx States RLC Tx Entity state (NULL/DTR) Description

MAC State Info


This item includes MAC DL/UL state information. Parameter MAC UL State Current state of MAC uplink (0-NOT_CONFIGURED, 1-CONFIGURED, 2-OUT_OF_SYNC, 3-IN_SYNC, 4IN_CR, 5-READY_TO_SCHED ) MAC DL State Current State of MAC downlink (0-NOT_CONFIGURED, 1-CONFIGURED, 2-PCH_STATE, 3-RACH_STATE, 4DSCH_STATE) Description

MAC UL Transmission Info


This item is for total packets information of uplink data transmission.

Copyright by Accuver Ltd.

Page 81

Parameter Count> 1st Trans Count> 1st Re-Trans Count> 2nd Re-Trans Count> 3rd Re-Trans Count> 4th Re-Trans Count> 5th Re-Trans Count> 6th Re-Trans Count> 7th Re-Trans Count> 8th Re-Trans Count> 9th Re-Trans Count> 10th Re-Trans Count> Total Trans Count> Bad Count Percentage> 1st Trans Percentage> 1st ReTrans Percentage> 2nd ReTrans Percentage> 3rd ReTrans Percentage> 4th ReTrans Percentage> 5th ReTrans Percentage> 6th ReTrans Percentage> 7th ReTrans Percentage> 8th ReTrans Percentage> 9th ReTrans Percentage> 10th ReTrans Percentage> Total Trans Percentage> Bad Percentage Success in 1st transmission Success in 1st re-transmission Success in 2nd re-transmission Success in 3rd re-transmission Success in 4th re-transmission Success in 5th re-transmission Success in 6th re-transmission Success in 7th re-transmission Success in 8th re-transmission Success in 9th re-transmission Success in 10th re-transmission SuccessCnt i (Where, i = 0 to 10) Bad Count

Description

1st Trans/(Total Trans+Bad Count)*100 1st Re-Trans/(Total Trans+Bad Count)*100 2nd Re-Trans/(Total Trans+Bad Count)*100 3rd Re-Trans/(Total Trans+Bad Count)*100 4th Re-Trans/(Total Trans+Bad Count)*100 5th Re-Trans/(Total Trans+Bad Count)*100 6th Re-Trans/(Total Trans+Bad Count)*100 7th Re-Trans/(Total Trans+Bad Count)*100 8th Re-Trans/(Total Trans+Bad Count)*100 9th Re-Trans/(Total Trans+Bad Count)*100 10th Re-Trans/(Total Trans+Bad Count)*100 Total Trans/(Total Trans+Bad Count)*100 Bad Count/(Total Trans+Bad Count)*100

XCAP-LTE Analyzer Parameter Description/Ed.04

RACH REQ Info


This item includes RACH request information. Parameter RACH Transmit Time Retransmission Num RACH Type RACH transmit time Retransmission Num 0 : INITIAL 1 : HANDOVER 2 : UL DATA ARRIVAL 3 : DL DATA ARRIVAL 4 : SR MAX 5 : NO_SR_CONFIG RA-RNTI Preamble ID RACH RNTI Preamble Identity Description

RACH RSP General Info


This item includes RACH response information. Parameter RACH Response Receiving Time Result RACH Preamble Identity BackOff Indicator Time Advance Temporary C-RNTI MCS TPC for scheduled PUSCH Hopping Flag UL Delay CQI Request Resource Block Assignment Access RACH Latency RACH response receiving time 0: NACK, 1: ACK RACH Preamble Identity BackOff Indicator Time Advance Temporary C-RNTI Modulation and coding Scheme TPC command for scheduled PUSCH Hopping Flag UL Delay CQI Request Resource block assignment(10bits) Access RACH Latency (sec) Description

RNTI Info
This item includes RNTI information. Parameter C-RNTI C-RNTI Description

Copyright by Accuver Ltd.

Page 83

RA-RNTI Temporary C-RNTI

RA-RNTI Temporary C-RNTI

Serving Cell & Neighbor Cell Lists


Parameter Serving Cell Info> UE State Current UE state - UE_IDLE_MODE - UE_CONNECTED_MODE - NO_SERVICE - NON_LTE_RAN Serving Cell Info> Freq UL Serving Cell Info> Freq DL Serving Cell Info> PCI Serving Cell Info> TAC Serving Cell Info> PLMN Identity Serving Cell Info> Global Cell ID Intra Freq Cell Lists> DL Freq Intra Freq Cell Lists> Serving Cell> Serving PCI Intra Freq Cell Lists> Serving Cell> Serving RSRP Intra Freq Cell Lists> Serving Cell> Serving RSRQ Intra Freq Cell Lists> Serving Cell> Serving RSSI Intra Freq Cell Lists> Serving Cell> All Cell Info Intra Freq Cell Lists> Monitored Cell> Monitored Cell Count Number of Monitored PCI from Intra Freq Cell Intra Freq Cell Serving RSRP/RSSQ/RSSI per PCI Intra Freq Cell Serving RSSI Intra Freq Cell Serving RSRQ Intra Freq Cell Serving RSRP Intra Freq Cell Serving PCI Uplink Carrier Frequency Downlink Carrier Frequency Physical Cell Identity Tracking Area Code PLMN Identity Global Cell ID Downlink Carrier Frequency Description

XCAP-LTE Analyzer Parameter Description/Ed.04

Intra Freq Cell Lists> Monitored Cell> Monitored Cell List Intra Freq Cell Lists> Monitored Cell> Summary Monitored Cell List Intra Freq Cell Lists> Monitored Cell> RSRP Intra Freq Cell Lists> Monitored Cell> RSRQ Intra Freq Cell Lists> Monitored Cell> RSSI Intra Freq Cell Lists> Monitored Cell> Top Set Intra Freq Cell Monitored RSRP per PCI Intra Freq Cell Monitored RSRQ per PCI Intra Freq Cell Monitored RSSI per PCI PCI RSRP RSRQ RSSI Intra Freq Cell Lists> Detected Cell> Detected Cell Count Intra Freq Cell Lists> Detected Cell> Detected Cell List Intra Freq Cell Lists> Detected Cell> Summary Detected Cell List Intra Freq Cell Lists> Detected Cell> RSRP Intra Freq Cell Lists> Detected Cell> RSRQ Intra Freq Cell Lists> Detected Cell> RSSI Intra Freq Cell Lists> Detected Cell> Top Set Intra Freq Cell Detected RSRP per PCI Intra Freq Cell Detected RSRQ per PCI Intra Freq Cell Detected RSSI per PCI PCI RSRP RSRQ RSSI Intra Freq Cell Lists> All Set Intra Freq Cell Lists> Top Set PCI with RSRP strength from top 1 to 20 from Intra Freq Detected Cell Top 1 to 20 RSRP from Intra Freq Detected Cell Top 1 to 20 RSRQ from Intra Freq Detected Cell Top 1 to 20 RSSI from Intra Freq Detected Cell Detected PCI List with (RSRP,RSRQ) from Intra Freq Cell Detected PCI List from Intra Freq Cell Number of Detected PCI from Intra Freq Cell PCI with RSRP strength from top 1 to 20 from Intra Freq Monitored Cell Top 1 to 20 RSRP from Intra Freq Monitored Cell Top 1 to 20 RSRQ from Intra Freq Monitored Cell Top 1 to 20 RSSI from Intra Freq Monitored Cell Monitored PCI List with (RSRP,RSRQ) from Intra Freq Cell Monitored PCI List from Intra Freq Cell

Intra Freq Cell RSRP/RSRQ/RSSI/Cell State per PCI PCI RSRP RSRQ RSSI PCI with RSRP strength from top 1 to 20 from Intra Freq Cell Top 1 to 20 RSRP from Intra Freq Cell Top 1 to 20 RSRQ from Intra Freq Cell Top 1 to 20 RSSI from Intra Freq Cell

Copyright by Accuver Ltd.

Page 85

Top 1 to 20 Cell State from Intra Freq Cell Cell State - Serving - Monitored - Detected Inter Freq Cell Lists> Freq DL(x)>PCI(y)> RSRP Inter Freq Cell Lists> Freq DL(x)>PCI(y)> RSRQ Inter Freq Cell Lists> Freq DL(x)>PCI(y)> RSSI Inter Freq Cell Lists> Freq DL(x)>PCI(y)> Cell Type Inter frequency cell type 1 : monitored cell 2 : detected cell Inter frequency cell Received Power Inter frequency cell Reference Signal Received Quality Inter frequency cell Reference Signal Received Power

NAS System Info


Parameter PLMN_ID TAC Cell ID TAI List PLMN ID of the current cell TAC of the current cell Cell ID of the current cell Tracking Area identity List MCC (Mobile Country Code), MNC (Mobile Network Code) and TAC (Tracking Area Code). Description

RRC BCH Status Info


This item provides the information of BCH status. Parameter RRC BCH Status> PCI RRC BCH Status> Freq DL RRC BCH Status> Purpose Physical Cell Identity (0~503) DL Frequency Purpose of BCH Setup - SIB_NORMAL, - CELL_RESELECTION, - SIB_MODIFICATION, - MOVE_TO_IDLE, - SIB_CONNECTED, - SFN_READ, - SPECIFIED_SIB, - SIBC_SIB Description

XCAP-LTE Analyzer Parameter Description/Ed.04

RRC BCH Status> Result

Result of receiving System Information. - SUCCESS, - PLMN_MISMATCH, - MIB_TIMEOUT, - SI_TIMEOUT, - LAST_RESULT

NAS State Info


This item provides the state information of EMM (EPS Mobility Management), ECM (EPS Connection Management) and PLMN and EU (EPS Update) status when each state is changed. Parameter EMM State ECM State PLMN State EU State Description Current state of EMM (EPS Mobility Management) Current state of ECM (EPS Connection Management) Current state of PLMN Current EU (EPS Update) status

NAS State Info(R4)


This item provides the NAS state information of EMM (EPS Mobility Management), ECM (EPS Connection Management) and PLMN and EMM Cache status when each state is changed. Parameter EMM State ECM State PLMN State EMM Cache State Description Current state of EMM (EPS Mobility Management) Current state of ECM (EPS Connection Management) Current state of PLMN Current state of EMM Cache

Radio & NAS Signaling Failure Info


Parameter Radio Problem Cause NAS Signaling Failure Cause Description Radio problem diagnostic logging attribute. NAS signaling failure diagnostic logging attribute

RRC Freq Scan Info


This item displays the result of frequency scan. Parameter Search Type Cell Search Method - Frequency LIST - Frequency RANGE Description

Copyright by Accuver Ltd.

Page 87

Freq DL RSRP

DL Frequency Reference Signal Received Power

Cell Reselection Info


This item provides the information on both source cell and target cell when RRC perform cell reselection. Parameter Old Freq DL Old Cell ID New Freq DL New Cell ID Old Carrier Frequency Old Cell Identity New Carrier Frequency New Cell Identity Description

Handover History
This item displays handover history, delay and result. Parameter Source Cell Target Cell Handover Delay Result Handover Type Source Cell Physical Identity Target Cell Physical Identity Handover delay (Unit : ms) - FAIL - SUCCESS - LTE - Outbound IRAT - Inbound IRAT Description

Data Path Packet Loss


This item is for UL/DL packet loss of data path(HIM/PDCP/L2). Parameter UL UsbBlockTime UL SdioBlockTime UL UsbUnreg UL SdioUnreg UL HimAllocFail UL DimInvHdr UL DimNoRB UL PdcpSduFull UL PdcpPduBufFull UL PdcpCipAllocFail UL PdcpDisTimer UL MacSchedMiss UL : USB Blocking count UL : SDIO Blocking count UL : number of discarded packet in USB by unregistered connection UL : number of discarded packet in SDIO by unregistered connection UL : Memory allocation fail count in HIM UL : Number of discarded packet in DIM by Invalid header UL : Number of discarded packet in DIM because of no RB UL : Fail count in PDCP by PDCP SDU Queue full UL : Number of discarded packet in PDCP by PDCP PDU Queue full UL : Number of discarded packet in PDCP by Ciphering block full UL : Number of discarded packet by PDCP discard timer expiry UL : Number of discarded MAC PDU which is not transfered Description

XCAP-LTE Analyzer Parameter Description/Ed.04

DL PhyAllocFail DL MacInvHdr DL RlcDuplication DL RlcInvHdr DL RlcOutWnd DL RlcRsmFull DL PdcpInvHdr DL PdcpOutWnd DL CipAllocFail DL DimInvalid DL HimIfFull DL UsbBlockTime DL SdioBlockTime DL UsbPacketLoss DL SdioPacketLoss

DL : Number of discarded MAC PDU by memory allocation in L1 DL : Number of discarded MAC PDU by invalid MAC header DL : number of discarded RLC PDU by duplication DL : number of discarded RLC PDU by invalid RLC header DL: number of discarded RLC PDU which falls outside of window DL : number of discard RLC PDU by RSM buffer full DL : number of discarded PDCP PDU by invalid PDCP header DL : number of discarded PDCP PDU which falls outside of window DL : Number of discarded packet in PDCP by Ciphering block full DL : Number of discarded packet in DIM by IP Header length mismatch DL : Number of discarded packet in HIM by interface buffer full DL : USB block count DL : SDIO block count DL : number of discarded packet in USB DL : number of discard packet in SDIO

ESM Instance Info


This item includes ESM instance information R3. Maximum number of ESM instance is 15(1~15). The EPS Id uniquely identifies each ESM instance. Parameter Tab Index EPS Id Linked Bearer Id PDN Address APN QCI EPS Type 1: 1 tab, 2: 2 EPS ID Linked Bearer ID PDN IP Address Access Point Name QCI (1 ~ 9) - NONE BEARER TYPE - DEFAULT_BEARER - DEDICATED_BEARER ESM State PTI Instance Id - DEACTIVE - ACTIVE PTI Instance ID
st nd

Description tab, 15: 15


th

tab

Copyright by Accuver Ltd.

Page 89

Deactivate Mode

- NONE_MODE - NORMAL - NORMAL_ALL - DETACH - STATUS_IND - PDN_DISCONNECT - PDN_DISCONNECT_REJECT - PDN_DISCONNECT_TIMEOUT - MODIFICATION_REJECT - MODIFICATION_TIMEOUT - OVERWRITE - LOCALLY

Overwrite Mode

- NONE BEARER TYPE - DEFAULT_BEARER - DEDICATED_BEARER

Vous aimerez peut-être aussi