Académique Documents
Professionnel Documents
Culture Documents
Copyright
This document supports a preliminary release of a software product that may be changed substantially prior to final commercial release. This document is provided for informational purposes only and Microsoft makes no warranties, either express or implied, in this document. Information in this document, including URL and other Internet Web site references, is subject to change without notice. The entire risk of the use or the results from the use of this document remains with the user. Unless otherwise noted, the companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted in examples herein are fictitious. No association with any real company, organization, product, domain name, e-mail address, logo, person, place, or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. 2010 Microsoft Corporation. All rights reserved. Microsoft, Active Directory, ActiveX, BizTalk, Excel, InfoPath, JScript, IntelliSense, Internet Explorer, MSDN, Outlook, PivotChart, PivotTable, PowerPoint, SharePoint, Tahoma, Visio, Visual Basic, Visual C++, Visual C#, Visual SourceSafe, Visual Studio, Win32, Windows, Windows NT, Windows PowerShell, Windows Server, Windows Server System, and Windows Server are trademarks of the Microsoft group of companies. SAP, R/3, mySAP, mySAP.com, xApps, xApp, SAP NetWeaver, and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and in several other countries all over the world. All other product and service names mentioned are the trademarks of their respective companies. Data contained in this document serves informational purposes only. National product specifications may vary. All other trademarks are property of their respective owners.
Contents
Installing BizTalk Server 2010 on Windows 7 and Windows Vista ............................................... 4 Introduction ............................................................................................................................. 4 How to Use this Document ................................................................................................... 4 Checklist: Planning Your Installation..................................................................................... 5 Choosing your BizTalk Server Features and Components .................................................... 5 Feature Dependency Matrix ................................................................................................. 7 Hardware Requirements ...................................................................................................... 8 Software Requirements ........................................................................................................ 9 Considerations When Installing BizTalk Server 2010 ...........................................................11 Preparing Your Computer for Installation ................................................................................12 Install Critical Windows Updates .........................................................................................12 Enable Internet Information Services ...................................................................................12 Install Microsoft Office Excel 2010 or 2007 ..........................................................................13 Install Visual Studio 2010 ....................................................................................................14 Install SQL Server 2008 R2/ SP1 ........................................................................................14 Install Prerequisites for MQSeries Agent .............................................................................16 Install SQL Server 2005 Notification Services ......................................................................16 Disable the Shared Memory Protocol ..................................................................................17 Join the Local Administrators Group ....................................................................................17 Configure the Application Event Log....................................................................................18 Installing and Configuring BizTalk Server................................................................................18 Verify Your Installation ........................................................................................................19 Configure BizTalk Server ....................................................................................................20 Enable TCP/IP and Named Pipes........................................................................................20 Enable DTC on the Local Host Server .................................................................................21 Uninstalling BizTalk Server .....................................................................................................22 Uninstall BizTalk Runtime Components ...............................................................................22 Uninstall Enterprise Single Sign-On.....................................................................................22 Remove All Remaining Components ...................................................................................23 Uninstallation Complete ......................................................................................................24 Appendix A: Silent Installation ................................................................................................24 Appendix B: Redistributable CAB Files ...................................................................................28 Appendix C: Customer Experience Improvement Program in BizTalk Server 2010..................29 Customer Experience Improvement Program ......................................................................30
Introduction
This document describes the process for installing and configuring Microsoft BizTalk Server on a single computer running Windows 7 or Windows Vista. We recommend that you read this entire document before beginning your installation. This is because BizTalk Server connects many disparate components both internal and external to your enterprise so information can flow smoothly and securely in many directions. While even the most basic single-server deployment relies on many variables, most real-world deployment scenarios extend much farther to include multiple servers and eventually clusters of both physical and virtual computers. No two deployments of BizTalk Server are the same. Before you begin the installation process, gather information on the needs of your enterprise, and discuss the scope of your deployment with the IT Professionals, System Administrators, and Developers who will use BizTalk Server. By studying this Installation Guide and carefully analyzing the specific needs of your enterprise, you will eventually create your own deployment roadmap. For information about installing BizTalk Server 2010 on multiple computers, see Installing BizTalk Server 2010 and BAM in a Multi-Computer Environment (http://go.microsoft.com/fwlink/?LinkID=191321). You can also download and install the BizTalk Server Best Practices Analyzer (http://go.microsoft.com/fwlink/?LinkID=196491). The Best Practices Analyzer (BPA) examines a BizTalk Server deployment and generates a list of best practices issues it discovers. BPA performs configuration-level verification, by reading and reporting only, and uses the gathered data to determine whether best practices are being followed.
Installing and Configuring BizTalk Server walks you through installing and configuring BizTalk Server. The section includes procedures for determining whether your installation was successful. Appendices y y y A. Silent Installation lists commands and options for an unattended installation. B. CAB Files links to the redistributable CAB files containing BizTalk Server prerequisites. C. Customer Experience Improvement Program in BizTalk Server 2010 provides information about providing feedback to Microsoft about BizTalk Server 2010.
*Only necessary if you are using the Windows SharePoint Services Adapter Web Service. Installing and configuring BizTalk Server y y y y y Install BizTalk Server 2010 Verify your installation Configure BizTalk Server Enable TCP/IP and named pipes in the SQL Server Configuration Manager Enable Microsoft Distributed Transaction Coordinator (MS DTC) on the Local Host Server (LHS)
Documentation Core documentation, tutorials, UI reference (F1 Help), programmers reference, and usage instructions for the SDK samples and utilities. Server Runtime The essential runtime services for BizTalk Server. BizTalk EDI/AS2 Runtime Runtime services providing native support for Electronic Data Interchange (EDI) data exchange and Applicability Statement 2 (AS2) data transport messaging functionality. Windows Communication Foundation (WCF) Adapter Runtime Adapters enabling BizTalk Server to communicate with WCF-based applications. Portal Components Also known as Business Activity Monitoring (BAM), these are a set of services enabling users to communicate and collaborate, and also to configure and monitor business processes and workflows. Administrative Tools Software necessary to administer BizTalk Server on both the local computer and a remote server. Windows Communication Foundation (WCF) Administration Tools Administration services for WCF components. Developer Tools and SDK Samples and utilities that enable the rapid creation of BizTalk Server 2010 solutions. This includes SDK samples and supporting documentation, BizTalk Explorer, schema and map designers, and Visual Studio project templates. Important You must install this component if you plan to do any development work. The Visual Studio extensions used by BizTalk Server will not work without the Developer Tools and SDK component installed. Additional Software The following components enable a more flexible BizTalk deployment: y y Enterprise Single Sign-On (SSO) Administration Module: The interface for managing SSO Affiliate Applications and their mappings. Enterprise Single Sign-On Master Secret Server: The SSO server that stores the master secret. All other SSO servers in the system get the master secret from this server. The Master Secret Server is required in a BizTalk Server environment. Business Rules Components: Used for composing policies to be consumed by the Business Rules Engine. MQSeries Agent: Provides communication between the BizTalk Adapter for MQSeries and MQSeries Server for Windows. Windows SharePoint Services Adapter Web Service: Allows the Windows SharePoint Services Adapter to process incoming and outgoing documents through Windows SharePoint Services. BAM Alert Provider for SQL Notification Services: Allows BAM Alerts. BAM Client: Client-side software enabling business users to work with BAM. BAM Eventing: Interceptors for Windows Workflow Foundation and Windows Communication Foundation. Also includes the BAM Event API, which sends events to the BAM database from custom applications.
6
y y y
y y y
y
Project Build Component: A tool enabling you to build BizTalk Server solutions without using Visual Studio.
y y y
Hardware Requirements
The following table shows the minimum hardware requirements for your BizTalk Server computer. In a production environment, the volume of traffic may dictate greater hardware requirements for your servers.
Component Minimum Requirement
A computer with an Intel Pentium-compatible CPU that is: y 1 GHz or higher for single processors
8
Component
Minimum Requirement
y y
900 MHz or higher for double processors 700 MHz or higher for quad processors
Hyper-threading and dual-core processors are supported. The 64-bit versions of BizTalk Server require a 64-bit operating system running on an x64based system. Computers based on CPUs that are compatible with the AMD64 (x86-64) and Extended Memory 64-bit Technology (EM64T) processor architecture are considered x64based systems. BizTalk Server is not supported on Itaniumbased systems. Memory Hard disk 2 GB of RAM 10 GB of available hard disk space for a complete installation including the operating system and all prerequisite software. The hard disk must be NTFS formatted. CD-ROM or DVD-ROM drive Windows Server 2003-compatible VGA or higher-resolution monitor set to 1024 x 768 pixels or greater resolution Network adapter card, and Microsoft mouse or compatible pointing device
Drive Display
Other
Software Requirements
This page lists the software required for running BizTalk Server. Youll be guided through installation steps for all of these prerequisites in a later section. Microsoft Windows Can be either Windows 7, Windows Server 2008 R2, Windows Server 2008 SP2, Windows Vista with Service Pack 2 (SP2). Internet Information Services (IIS) Version 7.5 and 7.0 is supported. Provides a scalable Web application infrastructure. Required for: EDI, BAM, WSS Adapter, and UDDI. Microsoft Office Excel 2010 or 2007 Business Activity Monitoring (BAM) uses an Excel workbook to display a real-time view of business processes.
If you are using Microsoft Office Excel 2010, you must install Excel 2010 hotfix package Knowledge Base article 2345338 (Description of the Excel 2010 hotfix package (excelc-xnone.msp, excel-x-none.msp): August 31, 2010). Note BizTalk Server 2010 supports only 32-bit version of Microsoft Office 2010. Required for: BAM. Microsoft .NET Framework 4 and .NET Framework 3.5 with Service Pack 1 (SP1) The .NET Framework 4 works side by side with older Framework versions. Applications that are based on earlier versions of the Framework will continue to run on the version targeted by default. The Microsoft .NET Framework 3.5 SP1 (formerly WinFX), is the new managed code programming model for Windows. It combines .NET Framework 2.0 with four new technologies: Windows Presentation Foundation (WPF), Windows Communication Foundation (WCF), Windows Workflow Foundation (WF), and Windows CardSpace (WCS, formerly InfoCard). Required for: All BizTalk Server managed components. Microsoft Visual Studio 2010 Provides a development environment for building applications that target any device and integrate with any platform. Professional Edition is recommended, but Standard and Team System are also supported. Required for: BizTalk Server Developer Tools and SDK component. SQL Server 2008 R2/2008 SP1 A relational database server for processing high volumes of data. For optimal performance, we recommend SQL Server 2008 R2/2008 SP1 Enterprise Edition. In order to fully use the BizTalk Server 2010 SDK, or deploy BizTalk Server applications from a Visual Studio development environment, you must also install the SQL Server Development Tools. Important BAM real-time aggregation (RTA) is not supported in SQL Server 2008 R2/2008 SP1 Standard Edition. In order to use BAM RTA, you must install SQL Server 2008 R2/2008 SP1 Enterprise Edition. Using SQL Server Express Edition in a production environment is not recommended. The Express edition does not include certain features needed by BizTalk Server.
y
y
Required for: BizTalk Server Runtime, EDI, and BAM. SQL Server 2005 Notification Services Enables the use of BAM Alerts. Note that this SQL Server 2005 feature is not included in SQL Server 2008 R2/2008 SP1, and must be downloaded separately. Required for: BAM Alerts. SQLXML 4.0 with Service Pack 1 Enables XML support for your SQL Server database and allows developers to bridge the gap between XML and relational data. You can create an XML view of your existing relational data and work with it as if it were an XML file. To install SQLXML 4.0 SP1, see Microsoft SQL Server 2008 Feature Pack (http://go.microsoft.com/fwlink/?LinkID=189325).
10
2. Configure the BAM portal by selecting the new website from the BAM Portal Web Site list.
12
The .NET Framework 4 can be installed side-by-side with previous versions of the .NET Framework on a single computer. If IIS was previously enabled on the computer, the setup process for the .NET Framework automatically registers ASP.NET 4 with IIS. However, if you install the .NET Framework 4 before you enable IIS, you must run the ASP.NET IIS Registration tool in order to register the .NET Framework with IIS and create application pools that use the .NET Framework 4. To manually register ASP.NET 4 with IIS, at the command prompt, type the following command and press Enter: %windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe /i. After registering ASP.NET 4, you must ensure that the restriction status of ASP.Net v4.0.30319 is set to Allowed. To check the registration status, follow these steps: 1. Open IIS Manager. In Features View, double-click ISAPI and CGI Restrictions. 2. The restriction status of ASP.Net v4.0.30319 should be set to Allowed. You can change the restriction status by selecting the restriction and clicking Allow or Deny in the Actions pane 3. Click Ok
13
14
BAM real-time aggregation (RTA) is not supported in SQL Server 2008 R2/2008 SP1 Standard Edition. In order to use BAM RTA, you must install SQL Server 2008 R2/2008 SP1 Enterprise Edition. To install SQL Server 2008 R2 1. Insert the SQL Server 2008 R2 installation disk into the DVD-ROM drive. The setup program will begin automatically. If prompted for automatic installation of prerequisite software, click OK. 2. On the SQL Server Installation Center, click Installation. 3. Click New Installation or Add Features to an Existing Installation. 4. Review the information on the Setup Support Rules screen, and then click OK. 5. On the Product Key screen, enter your product key and click Next. 6. On the License Terms screen, select I accept the license terms, and then click Next. 7. On the Setup Support Files screen, click Install. 8. On the Feature Selection screen, select the following features, and then click Next. y Database Engine Services y y y y y SQL Server Replication Full-Text Search
Analysis Services Reporting Services Shared Features y y y y Business Intelligence Development Studio Client Tools Connectivity Integration Services Management Tools - Basic y Management Tools - Complete
9. On the Instance Configuration screen, select Default instance, and then click Next. 10. Review the information on the Disk Space Requirements screen, and then click Next. 11. On the Server Configuration screen, click Use the same account for all SQL Server instances, enter a local account or domain account and password, and then click Next. 12. On the Database Engine Configuration screen, select Windows authentication mode, click Add Current User, and then click Next. 13. On the Analysis Services Configuration screen, click Add Current User, and then click Next. 14. On the Reporting Services Configuration screen, select Install the native mode default configuration, and then click Next. 15. On the Error and Usage Reporting screen, leave the default values, and then click Next. 16. On the Installation Rules screen, review the information and resolve any issues, and
15
then click Next. 17. On the Ready to Install screen, review the information, and then click Install. 18. On the Installation Progress screen, after setup has finished, click Next. 19. On the Complete screen, click Close.
y y
9. Click OK to close the Administrators Properties dialog box, and then close the Local
17
Users and Groups pane. 10. Click OK to close the User Accounts dialog box. 11. Close the Users Accounts pane.
5. Click OK, close the Event Viewer, and close Administrative Tools.
3. On the Start screen, click Install Microsoft BizTalk Server 2010. 4. On the Customer Information screen, type your user name and organization, enter your product key, and then click Next. 5. On the License Agreement screen, click Yes, I accept the terms of the license agreement, and then click Next. 6. Use the Customer Experience Improvement Program page of the BizTalk Server 2010 Installation Wizard to enable feature usage reporting functionality for BizTalk Server. For more information, see Customer Experience Improvement Program in BizTalk Server 2010 section in this guide. 7. On the Component Installation screen, review the available components and select the ones you want to install. 8. Accept the default installation location or click Browse to move to the location where you want to install BizTalk Server 2010, and then click Next. 9. If your computer is missing a prerequisite component such as ADOMD.NET, Setup can install the redistributable prerequisites. You can either: y y Select Automatically install the redistributable prerequisites from the web OR Select Automatically install the redistributable prerequisites from a CAB file if you have downloaded the CAB file. If you select this, you can then browse to the location of the CAB file and select it.
10. On the Summary screen, verify that the components that you select to install are correct. 11. To enable auto-logon after a system reboot, click Set and provide your logon information. Auto-logon is enabled only for reboots during setup, and is disabled when setup is complete. 12. Click Install to start the installation process. 13. On the Microsoft Update Setup page, click Use the Microsoft Update when I check for updates (recommended). 14. On the Installation Completed screen, clear the Launch BizTalk Server Configuration check box, and then click Finish.
2. Type regedit and then press Enter. 3. When the Registry opens, browse to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\BizTalk Server\3.0 4. If files exist in the 3.0 folder, setup succeeded. 5. Close the Registry, and then close the command prompt.
y y
In the right-hand pane, right-click SQL Server (MSSQLSERVER), and click Stop. When the service has stopped, right-click SQL Server (MSSQLSERVER) again, and click Start.
5. The steps listed above stops the NS$BAMAlerts service. You must restart the service. 6. When the service has restarted, close the Configuration Manager.
6. Click OK to close the Local DTC Properties dialog box. If prompted to restart the MSDTC service, click Yes. 7. Close Component Services. 8. Click Start, click Control Panel (View by: Large/Small icons), clickAdministrative Tools, and then click Windows Firewall with Advanced Security. 9. In Windows Firewall with Advanced Security, click Inbound Rules. 10. In the Inbound Rules pane, right-click Distributed Transaction Coordinator * (as appropriate), and then click Enable Rule. 11. In Windows Firewall with Advanced Security, click Outbound Rules. 12. In the Outbound Rules pane, right-click Distributed Transaction Coordinator * (as appropriate), and then click Enable Rule. 13. On the Control Panel (View by: Large/Small icons), double-click Administrative Tools. 14. In the right-hand pane, double-click Services. 15. In the right-hand pane of Services (Local), right-click COM+ System Application, click Restart, and wait for the service to restart. 16. Right-click and restart the Distributed Transaction Coordinator service. 17. Right-click and restart the SQL Server (MSSQLSERVER) service.
21
To uninstall BizTalk Server 2010 runtime components 1. Click Start, point to Control Panel (View by: Large/Small icons), and then click Programs and Features. 2. In the Programs and Features dialog box, click Microsoft BizTalk Server 2010, and then click Uninstall/Change. 3. On the Program Maintenance screen, select Remove, and then click Next. 4. On the Summary screen, review the components to be uninstalled, and then click Uninstall. 5. On the Uninstall Completed screen, click Finish.
To uninstall Enterprise SSO services 1. Click Start, point to Control Panel (View by: Large/Small icons), and then click Programs and Features. 2. In the Programs and Features dialog box, click Microsoft Enterprise Single Sign-On, and then click Uninstall/Change. 3. On the Program Maintenance screen, select Remove, and then click Next. 4. On the Summary screen, review the components to be uninstalled, and then click
22
Remove SQL Server agent jobs 1. Click Start, point to All Programs, click Microsoft SQL Server 2008 R2, and then click SQL Server Management Studio. 2. Click Connect. 3. In Object Explorer, expand SQL Server Agent, and then expand Jobs. 4. Remove the following jobs: y y y y y y y y y y y y y Backup BizTalk Server (BizTalkMgmtDb) CleanupBTFExpiredEntriesJob_BizTalkMgmtDb DTA Purge and Archive (BizTalkDTADb) Monitor BizTalk Server (BizTalkMgmtDb) MessageBox_DeadProcesses_Cleanup_BizTalkMsgBoxDb MessageBox_Message_Cleanup_BizTalkMsgBoxDb MessageBox_Message_ManageRefCountLog_BizTalkMsgBoxDb MessageBox_Parts_Cleanup_BizTalkMsgBoxDb MessageBox_UpdateStats_BizTalkMsgBoxDb Operations_OperateOnInstances_OnMaster_BizTalkMsgBoxDb PurgeSubscriptionsJob_BizTalkMsgBoxDb Rules_Database_Cleanup_BizTalkRuleEngineDb TrackedMessages_Copy_BizTalkMsgBoxDb Note If you deployed BAM, you may also need to remove the job named bam_<Cube Name>_<View Name>. Remove SQL Server Integration Services Packages 1. Click Start, point to All Programs, click Microsoft SQL Server 2008 R2, and then click SQL Server Management Studio. 2. Click Connect. 3. In Object Explorer, click Connect and select Integration Services, and then click Integration Services. 4. Expand Stored Packages and expand MSDB. 5. Remove the packages with the following prefixes: y BAM_AN_<Cube Name>
23
y
BAM_DM_<View Name>
Remove BizTalk Server 2010 databases 1. Click Start, point to All Programs, click Microsoft SQL Server 2008 R2, and then click SQL Server Management Studio. 2. In Object Explorer, expand Databases. 3. Remove the following databases: y y y y y y y y BAMArchive BAMPrimaryImport BAMStarSchema BizTalkDTADb BizTalkMgmtDb BizTalkMsgBoxDb BizTalkRuleEngineDb SSODB
Remove BAM Alerts Notification Services instance 1. Click Start, point to All Programs, point to Microsoft SQL Server 2005, and then click Configuration Tools.. 2. On the Configuration Tools menu, click Notification Services Command Prompt 3. Type the following command to disable the instance: nscontrol disable -name BAMAlerts. 4. Type the following command to stop the instance: net stop NS$BAMAlerts. 5. Type the following command to unregister the instance: nscontrol unregister -name BAMAlerts. Note The BAM Notification name is generated as NS$<Prefix for Alerts Database Name> where <Prefix for Alerts Database Name> is what you specified on the BAM Alerts configuration page. The default name is BAMAlerts. 6. Type the following command to delete the instance: nscontrol delete -name BAMAlerts server %computername% -force
Uninstallation Complete
At this point you have fully uninstalled BizTalk Server 2010.
computers that have the same configurations. Silent installation lets system administrators who want to install BizTalk Server 2010 on remote computers do so without user intervention. With a silent installation, a user does not have to monitor the installation and provide input. To perform a silent installation, use the command-line options provided to suppress all interaction and to provide parameters for all options. When you perform a silent installation, the installation program does not display messages. Instead, a log file captures the installation information that includes whether the installation was successful. You can then review the log file and determine the results of the installation. To perform a BizTalk Server 2010 silent installation 1. Click Start, point to All Programs, point to Accessories, and then click Command Prompt. 2. To start the silent installation, at the command prompt, type setup.exe /<command name><options>, and then press ENTER. 3. Check the installation status in the log file.
Command name Option Description
Provides help and quick reference. Suppresses UI during setup all dialog boxes, errors, or prompts requiring user input. All messages are entered into the setup log file. Note The Quiet flag cannot be specified for an upgrade, because upgrade requires user confirmation of selected options.
/CABPATH /S
<CAB file location> Indicates the location of the redistributable CAB file. <Configuration XML file> Performs a silent installation of features found in the specified configuration file. Note To install all features, specify ALL for the InstalledFeature parameter of the
25
Command name
Option
Description
configuration XML file. /PASSIVE Performs a passive installation. The setup program only displays the progress bar. Suppresses restart prompts and automatic restarts at the end of the installation. Always forces a restart after the installation is complete. Prompts the user before restarting. Uninstalls BizTalk Server 2010. <Logfile> [i][w][e][a][r][u][c][m ][p][v][*] Writes logging information to a log file to the specified path. Always uses verbose Windows Installer logging and it appends to an existing file. The following flags indicate which information to log: i - Status messages w - Nonfatal warnings e - All error messages a - Startup of actions r - Action-specific records u - User requests c - Initial user interface parameters m - Out-of-memory p - Terminal properties v Verbose output * - All /IGNOREDEPENDENCIES /INSTALLDIR <install path> /COMPANYNAME <program files folder> <company name> Bypasses the checks for downloadable prerequisites. Specifies the full path to product install location. Sets the company or organization
/NORESTART
26
Command name
Option
Description
name. /USERNAME /ADDLOCAL ALL <user name> Sets the user name. Installs all features. For more information about ADDLOCAL command, see Listing of Values for the ADDLOCAL Command (http://go.microsoft.com/fwlink/?Lin kID=189319).
Removes all features. Repairs all features. Enables Customer Experience Improvement Program (CEIP) in BizTalk Server 2010. Installs UDDI Installs Microsoft BizTalk Server RFID 2010
/PRODUCT UDDI msiexec.exe /i [MSIPATH] INSTALLDIR=[INSTALLDIRPATH] DATADIR=[DATADIRPATH] SQLSERVERMACHINENAME=[SQLS ERVERNAME] OVERWRITERFIDSTORE=1 INSTALLLEVEL=5 /lvxp RfidServicesInstall.txt /q For example: msiexec.exe /i "\\ABC\XYZ\RFID_x86\RfidServices.m si" INSTALLDIR=C:\Program Files\Microsoft BizTalk RFID\ DATADIR=C:\Program Files\Microsoft BizTalk RFID\ SQLSERVERMACHINENAME=(local) OVERWRITERFIDSTORE=1 INSTALLLEVEL=5 /lvxp RfidServicesInstall.txt /q
27
EN CN DE ES FR IT JA
http://go.microsoft.com/fwlink/?LinkID=189 403&clcid=0x409 http://go.microsoft.com/fwlink/?LinkID=189 403&clcid=0x804 http://go.microsoft.com/fwlink/?LinkID=189 403&clcid=0x407 http://go.microsoft.com/fwlink/?LinkID=189 403&clcid=0x40a http://go.microsoft.com/fwlink/?LinkID=189 403&clcid=0x40c http://go.microsoft.com/fwlink/?LinkID=189 403&clcid=0x410 http://go.microsoft.com/fwlink/?LinkID=189 403&clcid=0x411
http://go.microsoft.com/fwlink/?LinkID=189 406&clcid=0x409 http://go.microsoft.com/fwlink/?LinkID=189 406&clcid=0x804 http://go.microsoft.com/fwlink/?LinkID=189 406&clcid=0x407 http://go.microsoft.com/fwlink/?LinkID=189 406&clcid=0x40a http://go.microsoft.com/fwlink/?LinkID=189 406&clcid=0x40c http://go.microsoft.com/fwlink/?LinkID=189 406&clcid=0x410 http://go.microsoft.com/fwlink/?LinkID=189 406&clcid=0x411
28
Langu age
Windows 7
Windows Vista
KO TW
EN CN DE ES FR IT JA KO TW
http://go.microsoft.com/fwlink/?LinkID=189 404&clcid=0x409 http://go.microsoft.com/fwlink/?LinkID=189 404&clcid=0x804 http://go.microsoft.com/fwlink/?LinkID=189 404&clcid=0x407 http://go.microsoft.com/fwlink/?LinkID=189 404&clcid=0x40a http://go.microsoft.com/fwlink/?LinkID=189 404&clcid=0x40c http://go.microsoft.com/fwlink/?LinkID=189 404&clcid=0x410 http://go.microsoft.com/fwlink/?LinkID=189 404&clcid=0x411 http://go.microsoft.com/fwlink/?LinkID=189 404&clcid=0x412 http://go.microsoft.com/fwlink/?LinkID=189 404&clcid=0x404
http://go.microsoft.com/fwlink/?LinkID=189 405&clcid=0x409 http://go.microsoft.com/fwlink/?LinkID=189 405&clcid=0x804 http://go.microsoft.com/fwlink/?LinkID=189 405&clcid=0x407 http://go.microsoft.com/fwlink/?LinkID=189 405&clcid=0x40a http://go.microsoft.com/fwlink/?LinkID=189 405&clcid=0x40c http://go.microsoft.com/fwlink/?LinkID=189 405&clcid=0x410 http://go.microsoft.com/fwlink/?LinkID=189 405&clcid=0x411 http://go.microsoft.com/fwlink/?LinkID=189 405clcid=0x412 http://go.microsoft.com/fwlink/?LinkID=189 405&clcid=0x404
anonymous and cannot be used to identify you. Microsoft collects feature usage statistics as part of this program. By participating in this program, you can help improve the reliability and performance of various features of BizTalk Server. Post BizTalk Server 2010 Beta, you may also choose to opt out of this program. For more information about this program and its privacy policy, see Microsoft BizTalk Server CEIP Privacy Policy (http://go.microsoft.com/fwlink/?LinkId=188553).
Options
On the Customer Experience Improvement Program page, select one of the following options y y Yes, I want to participate in the program (Recommended). No, I dont want to participate in the program.
If you select Yes, users can decide whether they want to report Customer Experience Improvement Program events to Microsoft.
30