Académique Documents
Professionnel Documents
Culture Documents
WPQ Report N
Identification N:
Welded On:
Test Description
Revision N:
To Specification
Date:
SA-Material
AS 1548 5-490
Qualified Range
PAW
Manual
With Only
Material Thickness
Groove...........................................................................................................................
inches
All
Fillet Weld............................................................................................................................................
..
NA
All
Pipe Diameter
Groove........................................................................................................................................
NA
2.88
inches
Fillet Weld............................................................................................................................................
..
NA
Filler Metal (QW-404)
Specification (SFA) (only for information)............................................................................................................................
Without
Without
Filler Type (solid/metal or flux cored/powder) (GTAW/PAW)....Solid
. Solid, or Metal Cored
Deposited Weld Metal
3 or more passes
Less than 3 passes
Enter # of Passes & DWM
Groove.........................................................................................................................................
inches
??
inches
Fillet weld............................................................................................................................................
NA
All
Position (QW-405)
Groove.............................................................................................................................................
1G
Plate and Pipe > 24 inches ..........................................................................................................................................................
.
F (PA)
Plate and Pipe < 24 inches ..........................................................................................................................................................
F (PA)
Fillet Weld................................................................................................................................................
NA
F (PA)
Verticle progression (uphill or downhill)........................................
. Less than 15 Incline
Flat
Gas (QW-408)
For GTAW, PAW and GMAW Gas backing.....................................................................................
. With gas or metal backing
With
Type of fuel gas for OFW..............................................................................................................
.
NA
NA
Electrical Data (QW-409)
Current Type (AC or DC for GTAW) NA
.
NA
Polarity (EN or EP for GTAW)
..
NA
NA
Transfer mode (spray/globular or pulse to short circuit for GMAW)
.
NA
NA
BEND TESTS (QW-160)
Type and Figure Number
Results
NA
NA
NA
NA
OTHER TESTS
Visual Examination of Completed Weld (QW-302.4) Results:
NA
Alternaive radigraphic examinagtion (QW-191) Results:
Report Number:
NA
FILET WELD TEST (QW-180)
Fillet Weld - Fracture Test Results:
Length and % of Defects:
NA
Macro Examination (QW-184) Results:
Convexity
Concavity
NA
Fillet Weld Size
1. Leg Length
2. Leg Length
Welding of Test Supervised by:
Position:
Certified by
Date
Approved