Académique Documents
Professionnel Documents
Culture Documents
Ultrafast 25 ns, 50 ns and 75 ns Recovery Times 175C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction Reverse Voltage to 600 V Shipped in plastic bags, 5,000 per bag Available in Tape and Reel, 1500 per reel, by adding a RL suffix to the part number These devices are manufactured with a PbFree external lead finish only*
Mechanical Characteristics
Case: Epoxy, Molded Weight: 1.1 gram (approximately) Finish: All External Surfaces Corrosion Resistant and
Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 220C Max. for 10 Seconds, 1/16 from case Polarity: Cathode indicated by Polarity Band
MARKING DIAGRAM
MUR 4xx
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.
Preferred devices are recommended choices for future use and best overall value.
*For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
A A C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
MUR Rating Maximum Thermal Resistance, JunctiontoAmbient Symbol RqJA 405 410 415 420 440 460 Unit C/W
See Note 2
ELECTRICAL CHARACTERISTICS
MUR Rating Maximum Instantaneous Forward Voltage (Note 1) (iF = 3.0 A, TJ = 150C) (iF = 3.0 A, TJ = 25C) (iF = 4.0 A, TJ = 25C) Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, TJ = 150C) (Rated dc Voltage, TJ = 25C) Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amp/ms) (IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 Amp) Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/ms, Recovery to 1.0 V) 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%. Symbol vF 0.71 0.88 0.89 iR 150 5 trr 35 25 tfr 25 75 50 50 ns 250 10 ns 1.05 1.25 1.28 mA 405 410 415 420 440 460 Unit V
ORDERING INFORMATION
Device MUR405 MUR405RL MUR410 MUR410RL MUR415 MUR415RL MUR420 MUR420RL MUR440 MUR440RL MUR460 MUR460RL Package AXIAL LEAD AXIAL LEAD AXIAL LEAD AXIAL LEAD AXIAL LEAD AXIAL LEAD AXIAL LEAD AXIAL LEAD AXIAL LEAD AXIAL LEAD AXIAL LEAD AXIAL LEAD Shipping 5000 Units / Bag 1500 / Tape & Reel 5000 Units / Bag 1500 / Tape & Reel 5000 Units / Bag 1500 / Tape & Reel 5000 Units / Bag 1500 / Tape & Reel 5000 Units / Bag 1500 / Tape & Reel 5000 Units / Bag 1500 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
2
TJ = 175C
100C
25C
10 7.0
160
180 200
8 7 DC 6 5 4 3 2 1 0 0 20 40 60 80 100 120 140 160 180 200 TA, AMBIENT TEMPERATURE (C) SQUAREWAVE Rated VR RqJA = 28C/W
0.1 0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 dc SQUAREWAVE (Capacitive IPK =20 IAV Load) 10 5.0 C, CAPACITANCE (pF)
200
http://onsemi.com
3
TJ = 175C
10 7.0 5.0 3.0 TJ = 175C 2.0 25C 100C 1.0 0.7 0.5 0.3 0.2
100C
25C
100
200
300
400
500
600
700
8 7 6 5 4 3 2 1 0 0 20 40 60 80 100 120 140 160 180 200 TA, AMBIENT TEMPERATURE (C) SQUAREWAVE DC Rated VR RqJA = 28C/W
0.1 0.07 0.05 0.03 0.02 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3
14 12 10 8.0 6.0 4.0 2.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 (Capacitive IPK =20 IAV Load) 10
40 30 TJ = 25C 20
7.0
8.0
9.0
10
http://onsemi.com
4
Data shown for thermal resistance junctiontoambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured.
TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA 3 Lead Length, L (IN) 1/8 1/4 1/2 3/4 50 51 53 55 58 59 61 63 28 Units C/W C/W C/W
MOUNTING METHOD 1 P.C. Board Where Available Copper Surface area is small.
MOUNTING METHOD 2 Vector PushIn Terminals T28
L L
L = 1/2
http://onsemi.com
5
K D
1
A
2
NOTES: 1. DIMENSIONS AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 26704 OBSOLETE, NEW STANDARD 26705. INCHES MIN MAX 0.287 0.374 0.189 0.209 0.047 0.051 1.000 MILLIMETERS MIN MAX 7.30 9.50 4.80 5.30 1.20 1.30 25.40
DIM A B D K
http://onsemi.com
6
MUR420/D
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.