Académique Documents
Professionnel Documents
Culture Documents
How It Works:
The GPS Repeater kit (GPSTKC) is comprised of a GPS Repeater Amplifier and a GPS Repeater Antenna mounted on a pedestal. You can use your existing Active GPS roof antenna and cable or purchase these as options to the GPSTKC. The GPS signal is received by the roof top antenna and routed via a low loss cable to the GPSTKC Amplifier Antenna assembly where it is repeated. It takes at least three satellites to derive a position and five SVs for position, time, and redundancy. An important thing to remember is that one satellite will keep your receivers Almanac and Ephemeral data current. Our GPS Repeater kits have a range of approximately 100 feet and operate line of sight. The radiation pattern is similar to the beam of a flashlight. In some instances you may need multiple GPSTKCs due to obstacles. With judicious placement the number of GPS repeater kits can and should be kept to a minimum.
Note the GPSTKC is intended for installation and use in areas where the GPS signal in not currently present. The position receivers generate will be the position of the receive or roof antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration.
GPS SVs
Installation:
The GPS Repeater kit (GPSTKC) installation is simple. 1. Mount the pedestal GPS Amplifier Antenna assembly in a corner 8 to 30 ft. high. 2. Connect the GPS cable from the GPS roof antenna. 3. Plug in the Amplifier Antenna assembly and youre repeating GPS. 4. Adjust and point the Repeater antenna across the room at the opposite wall or corner. 5. Adjust the pedestal angle for best reception in all areas of the room.
Product Description
GPS Repeater Amplifier & Antenna assembled on a Pedestal Mount
General Specifications:
Operating Temperature 55 to 125 C Repeating Range 150ft Free Space Path Loss Characteristics -45dB at 10ft / -55dB at 25ft -60dB at 50ft (approximate signal strength of outdoors or 130dBm) -65dB at 100ft / -70dB at 150ft
Customer can choose to block DC to the antenna L2 or GLONASS operation requires antenna options
Mechanical Specifications:
Amplifier 2.5x2.5x1.25 / Pedestal Mount 4.125 Height / Total Assembly Height = 5.375 Pedestal Mount base 2.5x2.5 / Pedestal Mount hole pattern 2x2 (4-holes) Repeater Antenna 2.6x2.6 Antenna (RF IN) N type female connector
Customer can choose any connector male (plug) / female (jack) type N, TNC, BNC, SMA, SMB, SMC, or MCX
Available Options:
AC/DC Quick Connect Variable Power Supply Mil DC Power Supply Solar Power Supply Additional Port Out L1 Repeater Antenna L1/L2 Repeater Antenna L1/GLONASS Repeater Antenna L1 Roof Antenna L1/L2 Roof Antenna L1/GLONASS Roof Antenna Water Proof Variable Gain Cable 50 Cable 100 Cable 150