Académique Documents
Professionnel Documents
Culture Documents
DORMA MOVEO is opening up a completely new dimension in room partitioning systems. It underpins DORMAs world market leadership in this sector and you can profit from this development. Discover new possibilities for the flexible utilisation of your space. Adapt rooms in accordance with your individual requirements while maintaining maximum flexibility. Make the most of all the special advantages available
from this system for specifiers, architects, operators and users alike. DORMA MOVEO offers a new departure in effective space management. With lighter weights, increased speed and improved flexibility. You too can benefit from this unique innovation, one that gives you more space to manoeuvre, more room to develop than ever before. Now and into the future. Welcome to DORMA MOVEO!
A new and
New
New
Conventional partition
Weight/m2 (standard design) Standard method of ensuring top and bottom acoustic seals are in place Relative time savings for opening and closing Method of construction approx. 4045 kg By hand (with crank)
DORMA MOVEO
approx. 20 kg Electrically controlled automatic extension and retraction (ComforTronic) 50 % Sealed lightweight composite construction Modern industrial duplicate production Standard
Heavy-duty steel/aluminium construction Manual fabrication None, or subject to surcharge 80160 mm (depending on design)
Element thickness
100 mm
Cover plate 1
Surrounding sealing
Cover plate 2
Element construction The revolutionary sealed composite construction comprising light, sturdy outer shells in a sandwich structure with a core of acoustic foam (cold foam) ensures an inherently effective barrier for outstanding noise insulation and smoke control. The frame construction with all-round sealing extrusion
creates a self-supporting entity. The profiles themselves are acoustically decoupled by allround flexible extrusions to ensure significantly reduced levels of structure-borne sound transmission. The vertical convex/concave aluminium profiles with their integrated quad-lip gasket and deep positive interlock ensure
optimum sealing and stability of the element joint. And the aluminium channel sections serving as the top and bottom closure profiles hold the actuating mechanisms of the standard ComforTronic system.
ComforTronic The ComforTronic actuating system comes as standard and serves to extend and retract the horizontal seals (sealing strips) of the individual elements, and also the telescopic sleeve of the telescopic elements all under automatic electronic control. This means that anyone can operate the partition without the need for special training. It also eliminates the time and effort associated with manual crank operations and provides for excellent sound insulation and system stability. The entire partition opening and closing operation can be performed at twice the speed of that associated with conventional partitions.
Extendable horizontal sealing strips Each element is provided top and bottom with extendable, springmounted, flexible double-chamber quad lip seals. These are actuated by the ComforTronic mechanism and, when extended, press against the floor surface and ceiling track. The spring pressure allows for automatic adaptability to floor unevenness. The correct sealing strip contact pressure provided by the ComforTronic keeps the load on the screed or other floor coverings within acceptable limits. The result is excellent seal-tightness and stability of the system, with the elements reliably prevented from being dislodged.
Surrounding sealing The element is effectively sealed by an endless, all-round flexible extrusion (same frame sealing
principle as used for window casements), with the profiles and cover plates acoustically isolated as a result.
Element interconnection Combined positive and friction locking, convex/concave aluminium profiles with generous mating depth and integrated quad-lip gasket for optimum sealing. The vertical profiles are mounted in flexible backing profiles for acoustic isolation.
Corner sealing Specially shaped, flexible and flush-mounted sealing strip end mouldings of polyurethane ensure exceptional sealing top and bottom and increase the stability of the system.
The elements of the DORMA MOVEO system are exceptionally easy to slide manually into place. As soon as two elements are pushed together, the end-face contacts close the power supply circuit and the ComforTronic extends the sealing strips under electronic control. This ensures that the partition is correctly
closed and achieves excellent stability and sound insulation. Opening the partition again is merely a matter of throwing a switch. This causes the sealing strips to retract and the elements to be released, allowing them to be taken manually to their parking position all with the utmost ease and speed.
A
Sound insulation Spatial separation with low sound insulation Simple, uncomplicated and practical No extras Simple layouts Standard elements sufficient
B
Medium or high sound insulation (e.g. for use in office areas) Professional appearance, functional
C
High sound insulation (e.g. for frequent use for concurrent events) Elegant, prestigious
Design Additional functions performed by the surfaces Layout configurations Element section
Functional surfaces (e.g. for writing on or as projection surfaces) Special layout configurations or parking/stacking positions Elements required to have special properties
Smart Line
Business Line
Design Line
Smart Line
The clever solution thats right to the point
Business Line
The functional solution for the professional working environment
Design Line
The high value solution for exacting aesthetic demands
Dimensions Element thickness in mm Clear height in mm (min/max) Element width in mm Construction Construction type Element interconnection
Sealed lightweight sandwich composite with acoustic foam core Convex/concave aluminium profiles with sealing lips for combined friction and positive interlock
Equipment Method of operation Smoke protection Edging options With visible surface edging (K) With protective encasement edging (U) Surface finishes Classic Collection Design Collection Functional Collection Element types (further types in preparation)
ComforTronic (electronically controlled extension and retraction of the sealing strips) Standard (per DIN EN 1634-3)
4 $
4 $
4 $
Technology Sound insulation per EN 20140 in Rw 37 dB 47 dB 55 dB U-value per DIN in W/m2K Track type
4 Standard equipment
Passdoor
Fullwall element
Lichte Durchgangshhe (LDH) variations (in mm) (TM) Teilungsma Possible passdoor Min. clear height of Clear passage height Width of element partition (min. LH) (LDH) (TM) 2.440 2.100 1.070 2.440 2.100 1.170 2.440 2.100 1.250 2.440 2.100 957 2.440 2.100 1.057 2.440 2.100 1.137 Clear through-passage (LD) (one wing open) 820 920 1.000 820 920 1.000
Lichter Durchgang (LD) Clear passage width (LDB) (two wings open) 1.670 1.870 2.030
Passdoor
Double passdoor
10
d c
Vertical section.
Ceiling by others
Edging design.
Telescopic element Wall abutment
Wiring diagram and data a approx. 42 V, lflex cable included 4 x 1.5 mm2, length 6 m, to concave wall abutment b Control unit (254 x 180 x 90 mm) c 3 x 0.75 mm2 cable included, length 2 m, to power outlet d Power outlet by others 100120 V or 200240 V, 5060 Hz, min. 10 A e 3 x 0.6 mm2 cable by others, flexible, max. length 20 m, to switch f Switch
11
Easy parking.
In their stacked position, the elements form a compact package and can be accommodated in the smallest of spaces depending on the room Inboard parking solutions situation. The low weight of the elements and the associated structural advantages are particularly noticeable here. Below you will find our standard parking solutions; individual solutions for special requirements are also possible.
Parking solution PL3 Outboard parking solutions - Two-point suspension - 90 to partition axis - In several stacks
Parking solution PL4 - Two-point suspension - 90 to partition axis - Here with niche compartment door Parking solution PL5 - Two-point suspension - 90 to partition axis - Parked in a row arrangement
Suspension systems.
We have the right suspension system to suit any installation requirement and here are a few examples:
ca. ca. 120ca. 120 500 mm 120 mm mm 500 mm ca. 120 500 500 ca. 120 500 mm
17
ca. ca. 500ca. 500 1.000 mm500 1.000 mm 1.000 mmca. 500 1.000 mm ca. 500 1.000 mm
82
T-piece
ca. 1.000 ca. 1.000 1.500 1.000 1.500 mm ca.1.500 mm 1.000 1.500 mm 1.000 ca. ca. mm 1.500 mm
R-type track: Track system for right-angled configurations with cross-roller carriers for maximum possible layout variability; suitable for weights up to 500 kg per element. Support rollers in the junctions guarantee simple operation when sliding the elements across intersections.
by others
by others
K track curve
bauseits bauseits
70
bauseits
16
72
K track switch
by others
Wood screw 120x10 mm
by others
ca. ca. ca. ca. ca. 110 150 110 150 110 150 110110 150 150 mm mm mm mm mm
bauseits bauseits
bauseits
Holzschr. 120x10 mm
K-type track: Compact track system with minimum dimensions and mechanically coded junction technology with curves and switches for easy operation; suitable for weights up to 250 kg per element. With this track system, the elements are automatically guided to their position. Curved configurations possible. 13
Three surface finish collections to suit the full range of design and functional requirements.
Classic Collection The Classic Collection offers a variety of high-quality decorative finishes. The materials used are scratch- and impact-resistant, making them exceptionally tough and hard-wearing. Design Collection The Design Collection comprises high-grade real-wood veneers which, with their natural beauty and typical interplay of colour, shade and grain, impart an individual character to any room. Also available are striking metal decors and RAL-painted finishes. Functional Collection The Functional Collection contains finishes that add additional, professional functionality to your partition wall. You can choose from a variety of surfaces from write-on and magnetic to types suitable for painting or wallpapering. Special projection surfaces for data and daylight projectors are also available. Range: 7 4 magnetic/write-on surfaces 7 4 projection surfaces 7 Surface suitable for painting and wall papering
The surface finishes illustrated are just a few examples from the current collections. For detailed information on the surface finish collections, please consult our separate catalogues. 14
The MOVES electronic configurator (design tool) enables fast and easy planning of your MOVEO project, on site or at your offices, with our sales engineer on hand. Benefits: 7 Reduced planning process time 7 Shows all layouts and views with dimensions 7 Contains detailed parking system arrangements 7 Provides support in finding the right solution for your project 7 Illustrates the project with images from the catalogue 7 Provides all the ordering data and prices
The advice module also provides you with additional information for generating the optimum project solution. 15
www.dorma-hueppe.com
Door Control
Automatic
DORMA UK Ltd. Hppe Movable Walls Division Wilbury Way Hitchin GB-Hertfordshire SG4 OAB Phone +44 1 462 477600 Fax +44 1 462 477601 movablewalls@dorma-uk.co.uk www.dorma-uk.co.uk DORMA Polska Sp. z o.o. Dzia cian przesuwnych DORMA Hppe Ul. Warszawaska 72 PL-05-520 Konstancin-Jeziorna Phone +48 22 7365900 +48 22 7365901 Fax huppe@dorma.com.pl www.dorma.pl DORMA Ibrica S.A. Divisin Hppe Muros Mviles Camino de San Martin de la Vega, 4 E-28500 Arganda del Rey (Madrid) Phone +34 91 8757852 +34 91 8757884 Fax jpaller@dorma.es www.dorma.es
DORMA Schweiz AG Division Hppe Raumtrennsysteme Industrie Hegi 1a CH-9425 Thal Phone +41 71 8864646 Fax +41 71 8864656 dorma@dorma.ch www.dorma.ch Ecker Hppe Ges.m.b.H Hollabererstrae 4b A-4020 Linz Phone + 43 732 600451 + 43 732 650326 Fax office@ecker-hueppe.co.at www.dorma-hueppe.de DORMA Hppe Raumtrennsysteme GmbH + Co. KG Industriestrae 5 D-26655 Westerstede/Ocholt Postfach 2190 D-26648 Westerstede Phone +49 4409 666-0 +49 4409 666-489 Fax info.hueppe@dorma.com www.dorma-hueppe.com
Movable Walls