Académique Documents
Professionnel Documents
Culture Documents
Specification Contents
q Bore processing tolerances for mating shaft tolerances w Keyway dimensions for bore diameters e Nominal setscrew diameters for keyways r Nominal setscrew diameters for bore diameters (In the case of no keyway)
* For couplings whose bores are processed as a standard product, this specification may not suitable.
Unless there is a special order, it is processed by the former JIS (second class). For bore diameters under 12mm, keyways are not processed.
Shaft tolerance Recommended bore tolerance
b2 t2
b h
* If this is not a special order, the positions of setscrews will be 2 points, 90apart from each other.
h6h9 j6 k6 m6
H7 G7 F7 F7
90
2-M
Unit [mm]
for
bore
0.3 0
* If this is not a special order, the positions of setscrews will be 2 points, 90apart from each other.
90
2-M
Unit [mm]
41
Mechanical property
Metal material S20C-N S30C-N S30C-H S45C-N S45-H SS400 SCM420 SCM435 SUS303 SUS304 FC200 FC250 FC300 FC350 FCD400 FCD450 FCD500 A2014-T4 A2017-T4 A7075-T6 Yield point N/mm2
245 284 333 343 490 216 785 206 206 250 280 320 245 196 471
Hardness HB
116174 137197 152212 167229 201269 262352 269331 187 or less 200 or less 223 or less 241 or less 262 or less 277 or less 201 or less 143217 170241
42