Académique Documents
Professionnel Documents
Culture Documents
TOOLS AND GAUGES FOR MAINTENANCE IN LOCAL MANUAL CENTRAL AND _NUAL P .B.X. 'S OFFICES PURPOSES
Blank Page
X-65518-01
- ISSUE
14 - PAGE
FOB REISSUE
AI_ CHANGES
FROM 7. 8.
ISHUE
To add the KS-6367 wrench lag voltmeter relays. To add 1 Spring tools contained
To replace the No. 373 tool by the No. 373-B tool, and to add the No. 374-C tool for use with the No. 373-B tool. To add the No. 418-A 35-C test set. 222, tool for use on the No.
Depressor to llst of in the KS-6527 tool kit. tool for use on test cords.
9. 3. 1C.
4. 5.
To add the No. 436-A tool for use on 221, 223 end 224 type relays.
To add the "V" notch diagonal pliers per specification 6433 for use in skinning distributing frame wire. To replace and 38-B gauges, 58 gauges by the the Nos. 37 and respectively. Nos. 37-B To add the Nos. II3-A, II4-A for use on 92 type Jacks. and I!5-A gauges to
To add the No. 443-A tool for use in making connections to cord c_rcults.
ii. 12.
6. To add the No. 445-A tool for use moving dlal card holder frames.
in re13. To make other minor changes as required bring the speclfic_tlon up-to-date.
SECTION i.i
i - GENER/J_ manual P.B.X_'s and manual offices. Those tools and gauges wh Ich are requlrea in common battery offices are _esignated "C.B.", those which are required in magneto offices are aesignated "MAG.", and those which are required in manual P.B.X.'s are deslgneted "P.B.X.". 1.3 In adcltion to listing the tools and gauges in numerical order these lists also give a description, illustration and the use's of each tool and gauge. 1.4 when Tools and gauges listed in this specificstion shall not be furnished on Jobs except ordered by the Telephone Company.
This specification replaces X-65518-01, issue 13 a_d the appendix to X-65518-01. It covers the tools and gauges required for the maintenance of apparatus in local manual telephone offices, including the apparatus used in relay call indicator, call indicator from step by step and key indicator equipment and also manual P.B.X. 's. It will be reissued every four months under April l, August i and December i to keep date with tool and gauge changes, 1.2 dates of it up to
Section 2 of this specification contains numerical lists of tools and gauges arranged by code number to facilitate ordering. The lists cover tools and gauges which are required for
2 - TOOLS
AND GAUGES of the nuts 2.12 that the wlench wlll fit. ( ) are re-
The dimensions given in the description of the wrenches indicate in each case the size
_ICAL
LIST
OF TOOLS
*I-A
28
WRENCH - i/4" HEX. SOCKET (C.B. AND P._.X.) For use on protector nuts. Where are specified two of these tools 3/8" protectors are required
For
,,_-
_.,_"
............ _
(35) (34)
Replaced Replaced
*Order
as
the
1-A
Listening
Stick
X-65518-01
- ISSUE
14 - PA_
38-B
LAMP sOCKET WITH 802 CORD (C.B. AND P.B.X.) For general use
45
WRENCH - 5/16" I_. SOC_ (C.B. AND P.B.X.) For use on 89, i01, 105, 108, 114, iB4. 126, 172, 174, 198, 208 and 214 type relays and iS_-A, 103 and 169 type interrupters
_=_.#,_.,__
"
,,
.............. J
........
39
3[-ADJUSTER (P.B.X.)
-:
46 WRENCH - 3/8" HEX. SOCKET (C.B. AND P.B.X.) For use on 5 type message registers, l0 type buzzers and 89, 101, 17Z, 196 and 208 type relays _.
_5"
/6 _c-_ "
5" 4_
"
40
48
WRENCH - 7/32" AND 114" HEX. SOCKET DOUBLE-END AND SCREW-DRIVER (C.B., MAG. AND P.B.X.) For use on 1, 2 and 4 type buzzers, AC ringers and pivot type relays, 2_7, 243 type keys, 207, 213 type relays and precision type interrupter
5'__
.o2/'t']<
#
#
7
1 J 3 n _it
_"'_r _
_ _"
. ,,
.1,_r"
,l_r. ,.,_..
I
HX_.
Replace_
by tool
50-B
# !' Z
"" --
64
r;'l
t_l l _"
i 47''_" ..
16 3"Z A
4 '/
"
_,
,t "!_
. 4-
[,
.. _4 _
_ --_==___f_. 4_i'
Order
with
802 Cord
(58)
Replaced
by tool KS-2827
][-65518-01 - ISSUE
14 - PAGE
64
COMBINATION SCREW-DRIVER ARD PIN WR]_CH (C.B. AND P.B.X. ) For use on 4, 6, 7, I0, Ii an_ 15 type _asteners JaoE (75} Replaced by tool 74
(77} SOCEET DOUBLE END AND SCREW-DRAv_R (Combination of No, 147 an_ No, 405-A Tools) (_ag. C.B. and P.B.L} For use on 89, i01, 124, i_5. 126, 149, and 196 ype relays switches i05, 108, 114, 118, 121, L_2, 16_, 17_, 178, I79, 189, 190, and spring driven sequense
Replace_
by _ooi
149
82
I.,
I1!
r' ll .t,
-.>4 l._-fi"_ . _ L7""_v
WRENCH - 5/32" AND 7/52" H_. OPEN DOUBLE-END FLAT (C.B. AND P.B.X.) (87} Replaced by tool 519 use
For general
90
CAP REMOVER (C.B. AND P.B.X. ) For use on 5 type message registers
_a
9 '/
13 't
Z _;
.,
;" "
"
4 _
"
X-65518-01
- ISSUE
14 - PAGE
(92)
Replaced
by tool
276
ill
(93) 102
Replaced WRENCH
by tools
410-A
and 410-B
- 5/8" HEX. SOCKET (C.B. AND P.B.X.) 108 and 186 type relays, 5 type L. 4 1
H 3,,
message registers, 471 type keys I:
/Z
, _
1
2_% s'
Replaced
by tool
ll_"B
Tool 115)
103 COMBINATION PIN WRENCH, SCREW-DRIVER (C .B. AND P.B.X. ) For use on 16 type Jack fasteners AND Used to remove m_rklngs _b-----2
(C_B.)
underlining and multiple
f------Scraper
end
. _.._ ,, kl
_i
_ _----"
.(
29"
<
IJ l
<
4_
5 "
>I
i16 105 SPRING ADJUSTER (MAG.,C.B. AND P.B.X.) For use on vertical type keys
ADJUSTER (MAG., C.B. AND P.B.X.) (109) Replaced by tool KS-2548 For use on 49 and 92 type Jacks
3Z
76_z" JACK RIN@ SPRING ADJUSTER
J'{___.__-' -'"
_ _____"_ -,
with
7]"
X-55518-01
- ISSUE
14 - PAGE
(123) 1.24
Replaced
135
For mounting
shaft
For use in twisting the sleeve terminal of 49' type Jacks to lock the sleeve in position.
(125} 12g-B
Replaced
by %ool S19
WRENCH - 1/4" KEX. OPEN DOUBLE-END OFFSET (MAG,C.B. AND P._.X.) For use on rlngers in subscriber
Replaced RELAY
by tool
136-B
sets
blocking
flat
"_ _"
I"
08S '_ I
I_8
ADJUSTER (C.B. AND P.B.X. For use on the retractile message registers spring
) lug of 5 type
130
o, us.o,
...._" ,
, ,,
o,p,,o.s s co
"_
5"
_I_k_2_ 16 '"
4]_
,I[5_"_ _
lU
1_2
L,,_, l_r133
'
_I
''_
/"
s_RI_,G AD_,,_T,,_R
type keys
h_m
For cleaning
(MAG.AND C.B.)
For cleaning heat coll washers
'Y" S"
X-65516-01
- ISSUE
14 - PAGE
Replaced
by tool 319
207
SCREW-DRIVER 90 OFFSET (MAG., C.B. AND P.B.X.) For use with the 206 tool
For replacement
, j *"'__ .
a_
--_
"":028"
_'
149 (Replaces Tool 77 ) For holding soldering
"rl
_1_
, .02d-"--'
_"
,__
/6
wires
to jack
terminals
while
(208) 209 .
Replaced WRENCH
- D/15"
(C.B. AND P.B.X.) END OFFSET 499, 519 and 523 type AID, A18, B3, BIB,
_/I_,.._ _3 2/2_
243,
All,
a
S03 IND_ V{BEEL HOLDER (C.B.) interrupters 210 I_ _
3J"
__
'_'_/'_ |/
-I
21"_rk
._---_
L3-
n
206 SCHEW-DRIVER (MAG., C.B. - 30" OFFSET AND P.B.X.} For use on 186, 206, A, C, E, H, L, N, R an_ S type relays, 519 an_ C6 type keys
,
211
,,_
PLIERS (C.B.) For removing keys the buttons of 499 al_d b2_ type
_,_l_,..
""
,X,.
16
-,
1-65518-01
- ISSUE
14 - PAGE
212
ADJUSTING }_Y (C.B.) For turning the capstan head contact pole-pleee screws of 209 type relays amd
218-B
"A" CAM
TOOL
For use
on ib5 type
/3"
.-
:6.... "
q d
@-_
215 WRENCH15132" REX. SOCE_T (_AG., C.B. AND P.B.X. ) 137 type plugs 219 (Part of Tool 221) For use WRENCH
.,
SOCKET
_"---
on 25 and similar
Sype relays
io i<,r].-TL-.-.:-_ 't,,
/ k-J I_ " ,,
-. _
//6
"//'_
6""
For use on 188 and 189 type switches 3/" _-&_
_;411nI_$"-_] , /
7"
WRENCH
SOCKET
.
by tool 216-B
-TY __
__,_. _ 221
,-7
_,_
_ _
4"':*11""_1 5 j_l_ _ I_ _q
?,_ENCH - 3/8" AND 7/16" HEX. SOCKET DOUBLE-END A_q) DOUBLE-END SCREW-DRIV'_ (_iAG., C.B. AND P.B.X. } For placing fuses In cable termln_Is and for connecting wli_es to fuses and binding posts
COMBINATION TOOL WRENCH - 5/.16" _fEX. SOCKET W_NCH - 3/16" HEX. SOGE_T SCREW-DRIVER - 3 1/2" (C.B. AND P.B.X.) For use on 25 and ll8 Type Relays
!"-
I"1_,x.6#"
.. ,.
"/ii a_
a_
X-65518-01
- IS2_'E i - PAGE
2Z9
CAM CLEANER (C.B.) For cleaning the cams on spring sequence switches, and 155 type driven interrupters
_"
9 _
t
'
/"
.c
i
t
(231) (233) (234) 235 Replace_ Replaced by tool 349 243 WRENCH by tool R-6377Z by tool 30_ CLOSED Replaced
j
- 3/16" AND 5/8" HEX. FLAT DOUBLE-END (C.B.)
'
SPRING ADJUSTER (C .,_. ) For use on spring driven 155 type interrupters sequence switches, 7" " "" 1/16
g
L
'256
,_5.. UJz
WRENCH 5/8" AND 7/16" HEX. CPEE DOLS}LE-KND FLAT (C.B.) For use on 165 type interrupter
(_.B.)
For use on spring driven 155 type interrupters sequence switches,
16
X-6551_01
- ISSUE
14 - PAGE
246
P64
RETRACTILE
ADJUSTER
(C.B.)
For use on 246-A plugs, For adjusting the retractile on 208 and 214 type relays. spring lug
,,.._
._.
,,_
,, _i_
_3 Z 5_.
6"_ ,, .043
,52
255
/,6
265 SPRING ADJUSTER (C.B.) For use on spring driven sequence switches, 155 type interrupters and 200 and 206 type selectors. 265-B (Replaces Tool 265)
by tool
265-B
registers
for
traffic
purposes relays exceptapparatus and all types of and similar telegraph relays.
/"
JZ
"
266
IReplaced
4_"
by tool 266-B
-,
,,dT-:o2s"
259 (Replaces Tool 142) SPRING ADJUSTER (MAG. C.B. _/?D P.B.X.) 266-B (Part of Tool 265) (Replaces Tool 266) CONTACT BURNISHER BLADE (MAG. C.B. AND P.B.X. )
For use on 121, 122, 125, 149, 150, 162, 178, 179, 212, 218-A, A. B. C, E, G, H and R type relays, A-9 and A-14 _ype keys and 169 t_e interrupters.
/
tool
265-B
,--_"
o,,... .
Enlarged Tool) (End of view 32" 16 _ 267 (Replaces 257-B 267 ) Tool For (263) Replaced by II-A tuning fork. use Replaced by
,;
tool
-I
267-B INSULATOR
Interrupters.
X-65518-01
- ISSUE 14 -PAGE
i0
268
For adjusting mountln5 nuts of 18 and 19 type resistances, 200 type interrupters 7 pt
[C'O'))'-l _
I
oI
_r---I
,_
-.oz#"
Enlorged
"_[_l\\\\\\\\\\\\\\\\\\\_;z_]
V/e,,, r _ _..!"-.
9J"
-_,";I __ 277 _RENCH 1/4" HEX. OPEN -
of [nd
I; T --
END OFFSET (MAG.. C.B. AND P.B.X.) For mounting nuts on 18 and 19 type which "have been w_Ted in position reslstances
269
SCREW-DRIVER
For use
in mounting
Stromberg
Carlson
relays
_/'
_-
I"-/-I
/j"
For use on 121, T type relays, B,E,F,G,H,R and 122, 135, 149, 300 interrupt ers SPRING ADJUSTER
_I o
270 SPRING ADJUSTER (P.B.X.) For use in Stromberg interrupters Carlson
_-_-::.-'__o_,3 8
Z L_]__,
Enlorged view
.bH..
oferd
,"
"
,.
.I
relays and 171 type (301) (302) Replaced Replaced by tool R-63773 by tool 36_
h[]j]_
3_"
--
_Oe3places
) _?t
on 200 type seleotors. 1_7 a_d 80_ type relays, 491 type keys. S06 type seleotots and preoision type interrupters. _j ,.
from multiple
Jaoks
e_
7" Z 8
_[ -F_-.
3 br
. __,
V, wd E,?d e
I_J
.'"
(304)
Replaced
by
tool 344
][-55518-01305 WRENCH - 7/16" HEX. SOCKET (Replaoes OFFSET one end Of (C.B.) Tool 244J For use on D-54393 key, 200 stud 206 t_-pe '801eotors
ISSUE
14312 For
PAGE
P.B.X. ) cords
use in
repairing
switchboard
/,7
//.
_-
3" J
8--
13061
Repleoed
by
tOOl
417-1
4_"
Replaced
by _001
359 :.: . .
313
For use
CONDUCTOR C.B. A_D P.B.X.) (MAG., BRAID CUTTER in repairing switchboard cords
3-"
.141"-
40
Thd.
'
l.,.
311
"
{f18"
Illl| _ 64
AND '11].6" ...... . . . ,,
22
,,
3_j
WREltCit :
DOS/fOrt
When
I"
(C .B. _,N'D P.B .X. ) For use on 2 type dials and subsetringers.
T S"
-7"
_ 9"
z_---J
X-65518-0i
- ISSUE
14 - PAGE
12
S14
"U" SHAPED TWEEZERS (_AG., C.B. .AND P.B.X. ) For removing the end pieces of braiding and reenforcements from cords and conductors after being severed by the 312 and 313 tools
317
PLUG
For removing
L,:I _. .
S15 CONDUCTOR PIERCER (MAG. ,C.B. AND P.B.X. ) For piercing the conductors conductor cords of tinsel I - _1I_1
I \1--_' /_\,, \, I
I Ol6
6"
518 318 PLUG REMOVER AND ATTAC_R (MAG. ,C.B. AND P.B.X. ) For removing 109 and ii0 type plugs
PLUG REMOVER AND ATTACHER (MAG.) For use in removing 47 _ype plugs. This tool in conjunction with the 200 tool is equivalent to tool 317. This tool should not be ordered unless the offiee is already equipped with I;ool 200
l"
_#_DifOX"
I1"
_Ig-B
Tools 87, 12b, (C.B. AND P.B.X.) 146 and 519} For use in r_oving 2 and 4 type lamps 59, 60 and similar type number plates
(...
caps,
i
.020
''--_' _''-
IH
,,i" i'
X-65518-01
- ISSUE
14 - PAGE
15
Replaced
by tool 353
340
FLYabLE SHAFT (MA@. AND C.B. ) tool 133 for cleaning protector
For use in turning the relay contact and piece screws on 206 and 218 type relays
springs
L.
,
3"
c----7
-1J in,
/" f 4
525-B
ADJUSTER (C.S.) For use on the release type selectors ratchet dog of 204 S44 (Replaces Tool 304) SCREW-DRIVER OFFSET (C .B. ) clamp screw of 200 and
13'" --4
__i
J Z"_.J
._<_._ _ 6" " 4 _ 464
r,
it
78'
.0 ;_
....
.0411_
, ,,"
-_ I_-/3"2
Replaced
by tool 526-B
X-65518-01
- ISSUE
14 - PAGE
14
Replaoe_
by tool
553-B
LUBRICATOR
(c.B.ANDP.B.X. )
For use on 92 Cype I Jaoks.
(C.B.)
sequenoe .7. o_ switohes,
an_ 3_i} For use on Spring d_lven 155 type InSer_u_ters. ,....
--
I 7
.[
_"
J_
355
_--_I
MAGNF_T
-_ 16
556 349 (Replaees Tools 208 an_ SSl) FO_ use WRENCH - 3/16" AND 7/52" HEX. CI,OS_D DOU]_E-_E_'I) OFIPSET (NAG., G.B. AND P.B.X. ) on 114, i_4, 126, 174, 198, A, E, H,
L_
_r
3f o
350
SPRING ADJUSTE_ (C.B. AND P.B.X.) For adju_tlng the front contact i01, log, 108, 118 and 172 type spring on 89, relays
64
I ""
.....
,..I 3 L h
..
_-_,L _..
X-65518-01
_ ISSUE
14 - PAGE
15
(362-A}
Replaced
by tool 431-A
lO0Ooo
L
360-A
ooo001
._.o,0..
SOCKET TYPE CORD TIP - RED (MAG., C.B. AND P.B.X. ) For use in conjunction with 361-B, 364, 365 and ocher connectlng tools provided with pin terminals ,-3" /32 _
5"
registers, B and G selectors For use on 200 type type relays,and l0 type message
7_
360-B
SOCKET TYPE CORD TIPBLACK (MAG., C.B. AND P.B.X. ) For use in conjunction with 361-B, 364, 365 and other connecting tools provided with pin terminals 3" /',?_ 3_4
J'_ _"
,_:
_ .i
o,8"
SPADE TERMINAL (MAG., C.B. AND P.B.X.) For use In conjunction with 360 toni for
I_?"
II "
.
360-C
i"
_41_"
test
purposes _ _-_
! ,,-
SOCKET TYPE CORD TIP - W_ITE (MAG., C.B. AND P.B.X.) 363 For use in conjunction _Ith 361-B, 364, 365 and other connecting tools provided with pi_ terminels 3" / "-32
SUSPENDER CLIP (MAG., C.B. AND P.B.L For use In conjunction test purposes with
I"
f'
by tool 361-B
"
.
"
//"
" ' 3"'
t
(361)
Replaced
361-B RElaY WINDING CONNECTOR (Replaces (_G., O.B. AND P.B.X.) Tool 361) For use in conjunction with 360 tool for test purposes on E, R and similar type relays
Z9"
][-55518-01 - ISSUE
14 - PAGE
16
For use on 177 and 203 type relays. D-34393 key, secondary clocks, 491 type keys 33"
i.
6
Z_
J, siJiii,,
5" 3___/" 3" [ ,iEJl,_
mM].
UI|M_': -3'3 374-C CONTACT BURNISHER BLADE (MAG., C.B. AND P.B.X.) For use wlth 373-B tool
e 3zJ,t -.057"
_
For
,_
i
S1
"'
__L
g
U"
relaye
J_U_oo.A
i__
[. Z_"
L,t, _,
J
(Replaces _,e-A
(MAG., C.B.
AND D_,__OR
__
Replaced by tool 373-B" CONTACT BURNISHER HOLDER (MAG., C.B. AND P.B.X.) 379-A (Replaces tool R-63773)
on universal
type keys
and
jacks.
(C.B.}
,"
6_"
o _
the
driving
spring
lu_
of
200
LMAG., C.B.
AND P.B.X. )
"
_ L._o_ z-
on 3oo1
I l}
o/8._.oo_,,,
'_--'--_"
-}-ooe"
X-6551S-01
- ISSUE
14 _- PACZ 17
_85-B _84-A PORTASLE PLUG POLISHER (MAG., C.B. AND P.B.X.) For use holding
PLUG CHUCK (HAG., C.B. AND P.B.X.) In oonJunotlon with the 157 and 152 type plugs. 584-A tool for
For use in oonJunotion with the _85-A, B and C tools for holding plu_s while polishing
T-r_ __.. ,
I
h
, '
i
--_"
-',-_- Tllr_
, i .
.,
t , i
....___, J ,_._
,, J.... , ;_.
385-C
PLUG
CHUCK
_, ......3%--: ....._
I a _ ........ i _/_ w
6_ .......
d_ . '_........j" .......,,
385-A
PLUG CHUCK (MAG. A_D C.B.) in conjunotlon 47 type plugs with the _84-A tool for y__
i i
387-A
RELAY
k_
I ,
'
--
! ....
I
I
,_1I
588-A
WRENCH
- 3/16"
AND 1/4"
594-A
CONTACT
BITRNISR_R
(C._.A_ P._.X. 1
use on 141 a_Id similar type
tr
Jacks.
- "-,-I._-
"..._"1_-'_'-
TL
590-A PIN
-I
I-l
For
use
on _00
and
206
type
selectors
j,,.
_
#6
_c.,3.}
f
390-B
ic..
PIN
For use in conjunction with tool 5R_ for cleaning flared portion of 49 type Ja@k sleeves
l_" ..... /6
L
r
_.
,1
["--_
--1
"
I --_.
-T---'-J i r
i] ,--I_ ,, "
_ol-.For
llrl"
lubricating
Ij 64
X-65518-01
- ISSUE
14 - PAGE
19
WRENCH 5/3_" AND 3/16" HEX. SOCKET DOUBLE FI_D (Mag. C.B. and P.B.X. ) purposes
For replacement
For lifting
multiple
I "
I "
,3 '_
.IG
"-I
!i j" J J?:"
407-A (Replaces Tool 123) For use and 141 IACK SLEEVE HEMOVER (.__ '" (C.B. and P.B.X.) in removing type Jacks worn sleeves of 49 410-B (Replaces Tool 93) HARDWOOD WEDGE (C.B. AND P.B._. )
'I_ [
1 i, __/o_
"
5/_" (L__
If
IIi
,G
cable.
i I oj ,
,7
I
For llftlngmultiple
(C.B, and P.S.X.) JACK MOUNT ING COUNTER BORE For counter boring Jack mountings to accommodate the shoulder of a replacement sleeve for worn 141 type jacks
I"
408-A
_]
i_
t
L'"
--
411-A
F
409-A ,TACK SLEEVE CRIMPER (C.B. and P.B.X. ) For usa in c_mping replacement 49 and 141 type Jacks ,, _' sleeves o 414-B _ l_* . 2" 5
,f ,, _"
AUTOMATIC
wA_ER
(C.B. AND P.B. Y. ) of 49 ahd 141 type Jack mounting when Jacks replacing worn Jack sleeves
_..__.,.,._
li_x_,
For use
in d3:iving new
Jack sleeves
into the
!,[C_l
3Z
"--
X-65518-01
- ISSUE
14 - PAGE
20
415-A
SPRING
ADJUSTER
419-A
(C.B.)
For use on horizontal (221) type relays
/_----r /
2 422-A
,(
SCREW-DRIVER DOUBLE-END OFFSET (RL_G,, C.B. AND P.B.X.) For use on 122, 125 and similar type relays
(221)
type
relays
_ j_
;,i"
_'-_ F
___"
[%
_____l
l_
_
I __ 2
rp
_-_ _
423-A SCREW-DRIVER DOUBLE-END OFFSET (MAG., C.B. AND P.B.X.) For use on 122, 125 and similar type relays
417-A (Replaces
"-I_,
""
ll
Tool 30e}
For use
(C.B.)
type
selectors
i_ _ 1 "
'
!
",
_.
__
\19
__
6 418-A WRENCH 5/16" AND 7/32" HEX. OPEN DOUBLE-END FLAT (MAG., C.B. AND P.B.X.) For use on No. 35-C test setS
424-A
(C.B.)
the
.......
EB-65518-01
- ISSUE
14 - PAGE
21
425-A
interrupters
436-A For use 428-A RELAY WIhDING C01_CTOR (MAG., C.B. AND P.B.X.)
HEELPIECE ADJUSTI?_G TOOL (C.B. AND P.B.X.) on 221, _22, 223 and 224 type ,, relays
360 tool
on
_I_
_'003'',_ ,7.._'
_Ii
13" 32
53
6-_-
:
443-A
I"
CORD SHELF CONNECTING TOOL (MAG., C.B. AND P,B.X.) in making ocmnectlons to cord circuits
429-A (Replaces
For use
universal
type keys
445-A
DIAL CARD HOLDER TOOL (C.B, AND P.B.X.) in removing dlal card holder frames
For use 429-B (Replaces Tool R9190) KEY SUPPORT (MAG., O.B. AND P.B.X.}
universal
type keys
_
_
_____..
_
_ I_
L
/_
-_--_, ,;
_
X-65518-O1
- ISSUE
14 - PAGE
22
CORD REPAIR SCREW-DRIVER (MAG. C.B. AND P.B.X.) on switchboard cords, 89T 92, 188, 272,
GUN
,0
KS-b263 KS-2631 For general SCREW-DRIVER - 4-1/2" (MAG._C.B. AND P.B.X.) use on relays and keys Supplied
TABLE
For use
in repairing with
12' cord
8_'_"
4_"
i_x.
specify
length
of
H_AT COIL PLIERS (MAC;. C.B. AND P.B.X.) extracting heat coils
,t"
"""
EB-2993
oruo o
t K_-6015
;
V__G. C.B. AND P.B.X.)
use DUCK-BILL PLIERS For general
6"
) 6,{
1-65518-01
- ISSUE
14 - PAG_
23
WRENCH
SOCKET switches
KS-6527
on spring
sequence
For use in removing pe_cll points and other foreign materials from switchboard Jacks
KS-6278
1 - Special Elbow Light Holder 2 - Shelf Devices I - Automatlctlkit Auriscope I_R,,merCnslsts followlng'devices:iThlsof the 4 - Spring Depressors Z - Probing Tools i - Six-foot Two Conn_,otor Cord equipped with Special Socket Type Connector on One End and Pin Terminals on the Other i - Extra Surgical Lamp for the Auriscope I - Extra Surgical Lamp for the Elbow Light Holder i - Wooden Carrying Case
__7' I /6
usoi
AAD P.B.X.)
KS-6320
For general
use
_v_.,_
6_
%.I
r _ 4 Ks-6ss_
I ] _ rool(Part221}of (Replaces Tool 35) For general
1
__t "-_ !
-I
_ _ _ i
SCREW-DRIVER--I/2" _
(MAG., C.B. AND P.B.X.}
use
Y_-6367
WRENCH - 7/16" AND 5/8" REX. OPEN DOUBLE-END FLAT (C.B. AND P.B.X.) voltmeter relays
_w)_
z
5 _ P
_,_
X-65518-01
- ISSUE
14 - PAGE
_4
R-1519
R-1760
FRAME
ADJUSTER
and 206
type selectors
i i
R-1572
,, i_ _-_ _ --,zo"
/A
_ \
OPEN DOUBLE-END FLAT (MAG., C.B. AND P.B.X.) WR_CH - 1/2" AND 9/16"
HEX.
I --,to"
test
sets .... qr
7c-.11
376-A I" " "_' ...... .... _}_
(R-1623)
Replaced
by tool
X-65518-01
- ISSUE
14 - PAGE
25
R2262
WRE_ICH 5/52" AND 7/32" HEX. 0PEN DOUBLE-END FLAT (C.B.) on 85-F relays
SYST_ REGULAR SCREWDRIVER - 4" PER A.T.& T. C0. DRAWING 46-X-54 (MAG., C.B. AND For general use P.B.X.)
BELL
For use
_.07_"
(R7940) (R9190)
Replaced Replaced
by
BELL SYST_ REGULAR SCREWDRIVER - 5" PER A.T.& T. CO. DRAWING 46-X-54 (MAG., C.B. AND P.B.X.) For general use
by tools
(c._.) For
use on horizontal type relays
.-
_12"
"I
PER SPECIFICATION N0.6136-N BELL SYST_ DIAGONAL PLIERS (MAG. C.B. AWD P.B.X.) ) For general use
s'-o'
5 DRIVER - 5 1/2" PER A.T.& T. CO. DRAWING 46-X-40 (MAG., C.B. AND P.B.X.) For general use STST_ P-LONG NOSE PLIERS - 6 1/2" PER A.T.& T. CO. DRAW_:NG 46-X-56 For general use (MAG., C.B. AND P.B.X.) BELL
G#" _
.'I J#
BELL SYSTEM CABINET SCREW- _ DRIVER - 6 1/2" PER A.T.& T. CO. DRAWING 46-X-40 (MAG., C.B. AND P.B.X.) For general use
_I
_/__
m==_.
X-66518-Ol
- ISSUE
l_ - ._AGE EG
SYS_ P-SIDE CUTTING pLT_.RS - 6" PER SPECIFICATION 6335-N {MAG., C.B. AND P.B.X.)
BELL
_14768
For use
BELL
SYSTNd P-SIDE CUTTING PLIERS - 8" P_ SPECIFICATION 6335-N (MAG., C.B. AND P.B.Xo) use
_14769
For general
BELL SYSTEM "V" NOTCII DIAGONAL PLIERS - 5" PER SPECIFICATION 6433 For use In skinning dlstrlbutlng frame wire
'
'-
(2077?)
Replaced
by tool 416-A
"These
code
n_abers
are A.E.
Co. code
numbers.
X-65518-01
zs_r_
14 -
PAGE B7
NUMERICAL
LIST
OF GAUGES
*g-A
TARGET (MAC,., C,B, .AND P.B.X.) For use fork conJunotion in tuning in oh,eking dials, with the the ll-A speed of
#12-A
Ii L
/I _e If _.ml l/ m_;_. // _ // //f _ __; _ _ . _ _ 28 15" 2,-_ for
I
J
9_
LIMITING GAUGE (P.B.Z.} measlLrtng the limit of I" " we ar on ]i0
\V"c*" _/__T
\\
-_.-_ ;o.
.*l_
......
-"1.242,
DEAD COLLAR
*IO_A
TUNING
FORK
.160 .2;36 .242 TIP SLEEVE WORN NO-IIO PLUGS ,,,, N0-28_
LIMITING P.S.x. GAUGE } (c.])..a_ For 141 measurLng type Jaok the limit sleeves ot wear of 49
" z,.t_
...l-
'"
'__i__J_-',,__"'-_?i' , z'J-J!"_'-l; I I '" '_ J _**II--A (Replaces Tool 28_) TUNING FORK (MA_., C.B. AND P.B.X.)
t _------]
and
7,j:lor .UJe in oonJunotl-on .wi%h %he 8-. _e_'get on, eking _he speed o_ dials and spring
.__.,r_, .
Order *Order **Order #Order as as as as the the the the
n
Fork Fork Fork
L_ _'-,:
,, ,T
X-65518-01
- ISSUE 14 - PAGE
28'
Replaced THICENESS
by gauge GAUGE
37-B NEST
41
.054"
THICKNESS
GAUGE
(C .B. AND P.B.Xo 1 For gauging the gap between and armatures feather spring type relays the ba_ok contact of 114 and 198
.012",.024 _ AND .035" (C.B. AZ_D P.B.X.) the armature gap on ringers
"
3N
"
,/] 64;
5"
38 38-B
Replaced
by gauge
3e-B
42
.015" THICKNESS
GAUGE
TF.ICHNESS GAUGE NEST .012", .024"..035" AND .060" (C.B. For gauging AND P.B.X.) on ringers
(C.B. AND P.B.X. ) For gauging the gap betwee_ i%he _ack contact an_ armature feather spring of 114 type relays
LIMITING (C.B.
GAUGE _ 43
,kND P.B.Xo)
the limit
X-65518-01
- ISSUE
14 - PAGE E9
Replaced
by gauge
62-B
Replaced
by
gauge
68-B
For measuring in grams the tension on the springs of A-4, B-5, B-6t B-7, B-8, B-9, B-I_, 237, 242, 251, _70, 471, 479. 494, 495, 506 and blO type keys, 4 type foot switches. E, H, I, N, R and S typ e relays I-.
o , u _ _(&. L_h
-W--I"_ _ h __J
3E (7o) (64-A) (66-A 66-B and 66-C) 66-D (Replaces Gauge 66-C) Replaced by gauge 99-A (70-B) Replaced by gauge 66-D (70-C) Replaced by gauge 70-F Replaced by gauge 70-E Replaced by gauge 70-D
67-A 67-B 67-a 67-D 67-E 67-F 67-G 67-H 67-J 67-K 67-L 67-M
.015" .020" .025" .030" .0_5" .040" .003" .004" .008" .005" .006" .010"
For measurlng gaps on A, 0, E, H, R and 105 type relays smd i type buzzers.
general
use
general
use
GRA_
GAUGE
73-B
.007"
A_D
.008"
THICKNESS
GAUGE
general
use
and
relays
"Q ,5
._,"E !
2
(73-C)
Replaced
by
gauge
73-D
AND
GAUGE
the
armature
3f"
/-
4:
Z"
_1
/6
I
/5 ""
r,_.
I
L1
X-65518-01
- ISSUE
i_ - PAGE
Sl
Replaced 0-i000
by gauge
79-C TENSION
(C.B.)
?4-D (Replaces Gauge 74-C) THICKNESS GAUGE NEST (MAG. C.B. AND P.B.X. ) ' For measuring In grams on 200 type selectors selecto_ee
/ Y"
75-B
75-C 75-D 95-E 95-F 95-G 75-H 75-J 95-K 95-L 75-M 95-N For etc. use on 200 type selectors,
.oo_.004" .005" .006" .002" .012" .018" .009" .009" .011" .010" .008" relays, keys,
_ r_T__
[ 99-C (Replaces Gauge 79-A)
_,
/o,_"
........... ',,,,,,,,
':
For measuring in grams the tension of sprigs of 200 and 206 type selectors, I)-54_393, B20 and E1 _ype keys and precision type interrupters. /-'" ,2 _ ._
_s2
"'6 _
L
79-D
/01_ "
,-
_
GRAM PUSH-PULL
0-6000
. _J
ll;o_,.
keys.
, .'
(77) 77-B (Replaces
Gauge 77 )
.'_! v
Replaced
,_
by 8ause 77-B
f._G.. C.B.A_P.B.X.)
For ga_lng on various lever keys. and plunger operate pressures
.012"
AND
pc---So
'_T--_
For
gauging
the
air-gaps "
4_
For gauging
(C.B.)
gaps on Signal Engineering Co.
/!"
.014" "'
J .OI2t"
,OZZ'-"
X-65518-01
- ISSUE 14 - PAGE
32
90
.0_0" THICKNESS GAUGE (C.B. AND P.B.X.} For gauging the gap between the back contact and armature feather spring on 114 and 198 type relays
95-A
For gauging the gap between the back contact and armature feather spring on 114 and 198 type relays 7"
91-0
.060"
THICKNESS GAUGE NEST (C.B. AND P.B.X.) 100-A 100-B 100-C .005 .010 .015
2/"_
--T
i'
s"
3Z
lO0-D
IO0-E 100-F IO0-G i00-H 101-A 101-B 101-D 101-E
.020
.025 .030 .035 .040 .030 .035 .050 .060
!___ '_
_, rr _
_ ! i/_[
:
92-A .010NON-_AAGNETIC OFFSET THICKNESS GAUGE (C.B.) and either pole-piece on 206 type
0_0"
For gauging the armature travel and front contact make gaps on B and G type relays
.o o
_
relays
.t-"
' _ -_
'
'"
/5"
"'
--=_ I 92-D
,I
.018" NON-MAGNETIC OFFSET THICKNESS GAUGE For use on 2;. _ype relays
.@
.018" , .
X-65518-01
- ISSUE 14 - PAGE
3Z
107-A
THICKNESS (C.B.)
GAUGE of 89
II2-A .040" AND .050" THICKNESS (Replaces (C.B. AND P.B.X.) Gauge R-2228) For gauging selectors alr-gape on 200
GAUGE
armature
alr-gap
' I _,,',_-_,4-o""
" gi 4_, _
"_
' ' _
z'
+
._
l&
'_
ll0-A
i1____
'
t '.-_"
&
'
For use in measuring contact separation of 207 type relays. A container, KS-6526, has been furnished separately.
made
.............
".....
this
Ill _4
and
gauge
-P-_ is
--:
_7" _,6"
-
'e-_,w t
-_!
P.B.X.) Jacks
on 92 type
-""-.005"
III-A
_o4_.
__'._=-'-'-_--.... ,,..
PLUG GAUGE I .3" _-Lt _'_:,.
3 32
_,,"
. __a
'_
*'
_V-,-_ '_ _
.,'n
(C.B.
__
ll5-A
CROSS
TEST
PLUG
X-65518-01
- ISSUE
14 - PAGE
34
(ES-2872)
Replaced
ES-6338
,: of gram gauges
I__ _: ..... _i
THICKNESS GAUGE NEST .0015 _' AND .002" TO .0_5" IN STEPS 0E .001" _(..B ) C
Foe general
(R-1981) use
Replaced KS-6938
by gauges
KS-6909
and
-.
(R-2228) Replaced by gauge II2-A