Académique Documents
Professionnel Documents
Culture Documents
LEGEND
Straight Section, Ladder (SL)
6F)
60
(3O, 3I, 4O, 4I, 6O, 6I)
SECTION
SECTION
SECTION
4 COPE Hat
SECTION
5 COPE Trof
SECTION
6 COPE Channel
COPE Ladder
T.J. COPE
Technical Data
Introduction/Contents
COPE Hat
COPE Channel
T. J. Cope, Inc.
11500 Norcom Rd.
Philadelphia, PA 19154
Tele: 215-961-2570
Fax: 215-961-2580
Toll Free 800-688-4857
COPE Trof
1-1
Overview
Fiberglass
For extremely corrosive areas, T. J. Cope offers the most
complete line of Fiberglass cable trays available. For a
complete T. J. Cope Cope-Glas catalog, please contact the
factory or the T. J. Cope representative in your area.
Special Finishes
For extremely corrosive areas Cope can supply a PVC
(polyvinyl chloride) coating over aluminum or uncoated steel.
This is applied using the fluidized bed process to a nominal
thickness of 12 mils.
Weathering steel is also available; contact factory for
availability.
Steel Pre-Galvanized
Ladder
Ventilated Trough
A prefabricated metal structure with clear openings no greater
than 4".
Trough cable trays are the best choice for smaller cables.
Ventilated troughs offer some air-flow while completely
eliminating cable sagging.
Solid Trough
A prefabricated metal structure consisting of a bottom with no
openings within the cable bearing surface.
Solid bottom cable trays completely eliminate cable sagging
and offer the most protection for the cables.
Channel
A prefabricated metal structure consisting of a one-piece
ventilated or solid bottom channel section not exceeding 6"
in width.
Stainless Steel
Type 304 and Type 316 stainless steel material in accordance
with ASTM-A-240.
Aluminum
Aluminum material in accordance with AA-6063-T6.
Aluminum trays are suitable for most outdoor applications and
offer reductions in total installed costs.
1- 2
COPE
NEMA CLASS
The NEMA Classifications for Cable Tray were established to
simplify and standardize the specification of Cable Tray. This
classification is based on the working load (the total weight of the
cables), and the support span (the distance between supports). The
NEMA VE1 specifications are contained in Section 2.
T.J. Cope is a member of NEMA and offers designs in all NEMA
cable tray classifications.
Width
(in.)
3"
6
9
12
18
24
30
36
22
33
44
65
88
108
130
6"
36
54
72
108
144
180
216
44
66
88
130
175
216
260
Support Spans
Support span is the distance between the supports. The NEMA
standard support spans are based on 8', 12', 16' and 20'.
NEMA Classes
The following table summarizes the NEMA classes based on
cable/working load and support span described previously.
Support Span
Feet
Working Load
Lbs./Linear Ft.
8A
8B
8C
12A
12B
12C
16A
16B
16C
20A
20B
20C
8
8
8
12
12
12
16
16
16
20
20
20
50
75
100
50
75
100
50
75
100
50
75
100
The total weight in the tray which causes the tray to collapse,
is called the "destruction load capacity". When trays do
collapse, they generally do so by premature lateral buckling
(compression) of the top flange.
Concentrated Loads
A concentrated load is a static weight applied between the
side rails at mid span. When specified, these concentrated
static loads may be converted to an equivalent uniform load
(We), in pounds per lineal foot, using the following formula:
We = 2 * Concentrated Load
Support Span
This load (We) is then added to the static weight of the cable
before selecting the appropriate NEMA load span designation.
Please note per the NEMA VE-1 guidelines all T.J. Cope Cable
Trays are labeled as follows:
WARNING!
T J COPE, INC
PHILADELPHIA, PA 19154
LINE 4
1B48-06SL-12-09
STR LGTH LDR AL 4"LD 06" W 12"L 09 RS
CABLE TRAY
6316
1-3
Technical Data
Overview
Overview
Wind Loads
75 m.p.h. wind = 25 lbs./sq. ft. pressure
Ice Loads
12" thick ice on tray surfaces weighs 2.4 lbs/sq. ft.
Snow Loads
Snow loads vary greatly depending on the latitude and
altitude at the job site. Contact local weather bureau for
information.
Safety Factor
All loads stated in the Cope Selection Charts have a 1.5 safety
factor, in accordance with the NEMA VE-1 Guidelines. A safety
factor is the reserve strength, above the actual cable loading, for
which a tray system was designed.
tral
Neu
s
Axi
*C
*T
DEFLECTION
(Sag)
SPAN
*CCompression
*T Tension
SIMPLE BEAM
Testing Methods
Loading data stated in the catalog has been derived from
actual testing of the tray systems, or by means of structural
calculations. These figures were based on Simple Beam
calculation, per the NEMA VE-1 guidelines.
TRAY
SUPPORT
SPAN
SIMPLE BEAM
TRAY
SUPPORTS
SPAN
SPAN
SPAN
1/100
1/75
1/75
1/50
CONTINUOUS BEAM
1- 4
COPE
CAVITY SIZE
LOAD DEPTH/WIDTH OF TRAY
The size of the cable tray cavity is determined specifically by the
electrical requirements and the by the specific cables being used to
meet those requirements.
Article 318 of the National Ele"BP5al Code lists the specific
requirements concerning allowable Cable Fill. It is imperative that
the size of the cavity meets the conditions set forth by the NEC,
specifically:
RADIUS OF FITTINGS
Cable tray fittings are used to change directions both horizontally
and vertically. The standard radii for cable tray fittings are 12",
24", and 36".
The radius of the fittings should be based upon minimum bending
radius of the cables. This information can be obtained from the
cable manufacturer.
Based on the total number of cables to be placed in the tray it may
be more practical to use the next higher radius.
A general rule of thumb is that the splice plates should not fall
beyond the 14 point of the span, or the distance between supports.
For example: On a 20' support span the splice plates should not
be further than 5' away from the support location.
Cable fill guidelines set forth by the NEC, are generally based on
limiting heat build up in the trays. Where data or communications
type cables are being installed, heat is not a critical issue and the
allowable fill is determined by the total cross sectional area of the
tray cavity:
Total Cross Sectional Area = (Width) x (Load Depth).
Fittings
Supports for cable tray elbows are critical. It is important to note
that the cable tray will come under its greatest stress when cables
are being pulled into the tray. Therefore, proper placement of
supports is necessary to insure that the integrity of the tray system
is maintained during the cable pulling operation.
The diagrams on page 2-10 shows the recommended support
locations for fittings.
1-5
Technical Data
Overview
Overview
MIN. TEMP.
MAX. TEMP.
130
50
40
30
110
70
10
50
30
10
10
TE
M
PE
RA
TU
RE
PE
10
30
F
0
1 8
1 4
(0.0)
(3.2)
(6.3)
3 8
1 2
5 8
3 4
7 8
Expansion
Splice Plate
Expansion
Guides
1- 6
T.J. Cope produces trays that meet the National Electrical Code
(ANSI/NFPA 70), and are classified by Underwriters Laboratories,
Inc. (UL) as equipment ground conductor. These can be used for
any project worldwide except where another standard may take
precedence, such as the Canadian Standards Association.
SL
O
30
40
C
The National Electrical Code, Article 318-7 allows for Cable Tray
to be used as an equipment grounding conductor in commercial
and industrial establishments. The following table lists specific
ampere ratings and the minimum cross sectional area requirements
for each rating.
90
20
20
ELECTRICAL GROUNDING
Regular
Splice Plate
Firm
Hold-Down
Expansion
Splice Plate
Expansion
Guides
Cope CSA steel designs are offered in Type 1 (HDGAF) finish and
aluminum with plain finish. Available are ladder, vented and solid
bottom cable troughs for 3 meter spans and ladder type for 6
meter spans.
Max. Fuse Amp Rating
Circuit Breaker Amp Trip Setting
Minimum Cross
or Relay Amp Trip Setting
Sectional Area
for Ground Fault Protection
of Metal* Steel
Aluminum
of any Cable Tray Circuit
Cable Trays
Cable Trays
In the Cable Tray system
In2
mm2
In2
mm2
60
0.2
129
0.2
129
100
0.4
258
0.2
129
200
0.7
452
0.2
129
400
1
645
0.4
258
600
1.50**
968
0.4
258
1,000
0.6
387
1,200
1
645
1,600
1.5
968
2,000
2.00**
1,290
*Total cross sectional area of both siderails for ladder trough type trays, or the minimum
cross sectional area for metal in channel type cable trays or cable trays of one piece
construction.
COPE
The cross-sectional area for each T.J. Cope Cable Tray system,
straight sections and fittings, can be found on the appropriate
Cope Selection charts contained within this publication. In addition
all Cope Cable Tray, straight sections and fittings, are supplied with
a pressure sensitive labels indicating the cross sectional area of
both siderails, as required by the (NEC) National Electrical Code,
Article 318.
SUMMARY
You are now ready to select the best Cope Cable Tray system to
meet your needs. By now, we hope you've decided to select the
system using the NEMA CLASSIFICATION (8A, 12B, 20C, etc.)
which makes your work so much easier. Selection is also possible
using physical dimensions, performance, or any combination of
these data listed in our exclusive NEMA oriented T. J. Cope
selection charts. As always, should you need additional
information, we suggest you contact your nearest Cope
Representative or call Cope directly.
NEC Articles
Description
2002 Edition
Prior Editions
Cable Trays
392
318
1-7
Technical Data
Overview
RUNG
SIDE RAIL
SIDE RAIL
HEIGHT
LOAD
DEPTH
TOP FLANGE
(stiffened
type shown)
BOTTOM FLANGE
LENGTH
WIDTH
Cope Ladder
Side Members Cope side members are designed with top and
bottom flanges turned outward. This simplifies fastening the cable
tray to the supports. Cable tray with outward facing flanges allows
complete access within the cable loading area and eliminates the
possibility of cable damage from sharp edges within the cable
area. The return on the top flange strengthens the side member and
allows cable to be smoothly dropped over the side.
Rung Cope ladder rungs are 1.00" diameter tubing flattened on
top to provide a cable bearing surface. This construction allows
cable to drop out anywhere without contacting a sharp edge.
Rung Spacing The interval at which rungs are swaged to the
side member. This is measured from centerline of rung to centerline
of rung. Cope manufactures straight lengths with four standard
rung spacings; 6", 9", 12", and 18". Rung spacing selected is
generally determined by size and type of cable being supported.
When in doubt, 9" rung spacing is a generally accepted
compromise.
Length The longitudinal dimensions of standard Cope Cable
Ladder are 10', 12', 20' or 24'.
2R
TRAYS WITH
TANGENTS
1- 8
COPE
Cutaway
Cope Swage
1-9
Technical Data
Cope Ladder
RUNG SPACING
TOP FLANGE
(stiffened type shown)
LENGTH
SIDE RAIL
HEIGHT
LOAD
DEPTH
WIDTH
SIDE RAIL
Cope Hat
Side Members Cope Hat side members are designed with top
and bottom flanges turned inward. This minimizes the space
requirements of the cable tray system, and allows a very low side
rail height for each NEMA Standard VE-1 load depth.
Rungs Cope Hat provides for hat shaped rungs.
Load Depth Measured from the top surface of the rungs to the
top of the side member. Cope manufactures four loading depths;
278", 358", 458" and 558" corresponding to the four nominal
loading depths in NEMA Standard VE-1; 3", 4", 5" and 6".
Overall Height Cope Hat cable tray overall height is equal to
the loading depth plus 58".
Fittings For changing direction both horizontally and vertically,
Cope manufactures elbows, tees and crosses in all widths and
loading depths. Fittings are available in three standard radii; 12",
24" and 36". Standard fittings maintain a nominal 9" rung
spacing through the centerline of the fitting. Cope manufactures all
standard fittings with zero tangents.
1- 1 0
COPE
Straight Lengths
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
1-1 1
Technical Data
Cope Hat
Cope TROF
CORRUGATED
VENTILATED
BOTTOM
LOAD
DEPTH
WIDTH
SIDE
RAIL
WEB
LENGTH
SIDE RAIL
HEIGHT
CORRUGATED
SOLID
BOTTOM
STRAIGHT SECTION
1- 1 2
COPE
STANDARDS
NEMA STANDARDS
VE 1-1991
REV. NOVEMBER 1993
Scope
This standard covers continuous, complete, metallic systems of ladder,
trough, solid-bottom or channel cable tray intended for, but not limited to,
the support of power, control and signal cables.
Contents
STANDARDS
SECTION 1
SECTION 2
MANUFACTURING STANDARDS
Materials .................................................................................................. 2-4
Finishes..................................................................................................... 2-4
Dimensions ............................................................................................... 2-5
Protection of Cable Installation .................................................................... 2-5
Fittings ...................................................................................................... 2-5
Marking of Trays When Used as Equipment
Grounding Conductors ......................................................................... 2-6
SECTION 3
SECTION 4
TEST STANDARDS
Destruction Load Test .................................................................................. 2-6
Deflection Test ........................................................................................... 2-7
Electrical Continuity of Connections ....................................................... 2-7
SECTION 5
SECTION 6
APPLICATION INFORMATION
Deflection .................................................................................................. 2-8
Concentrated Static Load ............................................................................ 2-8
Warning! Walkways .................................................................................. 2-8
Fittings ...................................................................................................... 2-8
Supports ................................................................................................... 2-8
Support Locations ...................................................................................... 2-8
Protection of Cable Insulation ..................................................................... 2-9
Thermal Contraction and Expansion ............................................................ 2-9
Cable Insulation ........................................................................................ 2-9
Support Locations for Fittings ............................................................... 2-10
FIGURES 6-1
THROUGH 6-8
FIGURE 6-9
2- 2
COPE
NEMA Standards
SECTION 1
Referenced Standards & Definitions
1.2 DEFINITIONS
Metallic Cable Tray System An assembly of cable tray
straight sections, fittings, and accessories that forms a rigid
structural system to support cables.
2-3
STANDARDS
Channel Cable Tray A prefabricated metal structure
consisting of a one-piece ventilated bottom or solid-bottom channel
section, or both, not exceeding 6" (152mm) in width.
SECTION 2
Manufacturing Standards
2.1 MATERIALS
Cable tray systems shall be made of either corrosion-resistant metal
or metal with a corrosion-resistant finish.
NEMA Standards
edges and heat-affected zone of welding are subject to
superficial oxidation. These areas are then protected through
electrolytic action of the adjacent zinc surfaces. The coating is
smooth, ductile, and adherent.
2.2 FINISHES
2.2.1 Carbon steel used for cable trays shall be protected against
corrosion by one of the following processes:
A. Hot-dip mill galvanized in accordance with ASTM Publication
No. A525 G90 Coating.*
2- 4
COPE
NEMA Standards
2.3 DIMENSIONS
2.3.1 General
Plus or minus values stated reflect the range of nominal dimensions
in cable tray designs and are not intended to represent manufacturing tolerances.
2.5 FITTINGS
The design and construction of fittings shall be based on the
assumption that they will be supported in accordance with the
recommendations given in 6.6 for support locations.
2-5
NEMA Standards
STANDARDS
SECTION 4
Test Standards
SECTION 3
Performance Standards & Load/Span
Class Designations
4.1.4 Supports
Load
(kg/m)
Support
Feet
Span
(m)
Designation
Per 3.1
(74.4)
(111.6)
(148.8)
(74.4)
(111.6)
(148.8)
(74.4)
(111.6)
(148.8)
(74.4)
(111.6)
(148.8)
8
8
8
12
12
12
16
16
16
20
20
20
(2.44)
(2.44)
(2.44)
(3.66)
(3.66)
(3.66)
(4.87)
(4.87)
(4.87)
(6.09)
(6.09)
(6.09)
8A
8B
8C
12A
12B
12C
16A
16B
16C
20A
20B
20C
NOTE 1- The above working loads are for cable only; when considering applications requiring concentrated static load, see 6.2.
NOTE 2 - These designations do not apply to channel tray, and the
manufacturer should be consulted.
2- 6
COPE
NEMA Standards
4.1.6 Loading
Each specimen shall consist of two 24" (610mm) lengths of side rail
plus mechanical connecting means.
SECTION 5
specifications & Drawings
5.1 DATA TO APPEAR IN SPECIFICATIONS
The following statement and minimum data, when applicable,
should appear in all cable tray specifications:
1. Cable tray shall be manufactured and installed in
accordance with NEMA Standard VE 1-1991
2. Load/span class designation (see Section 3)
3. Type (see Section 1.2)
4. Material (see Section 2.1)
5. Finish (see Section 2.2)
6. Rung Spacing (see Section 2.3)
7. Inside depth (see Section 2.3)
8. Width (see Section 2.3)
9. Fitting Radius (see Section 2.3)
10. Accessories (see Section 1.2).
2-7
NEMA Standards
STANDARDS
SECTION 6
Application Information
6.1 DEFLECTION
Under normal applications deflection limitations should not be
included in design criteria for cable trays. However, if unusual or
special conditions exist, the manufacturer should be consulted.
Limitations of deflection for aesthetic purpose only can result in an
over-designed tray system.
6.5 SUPPORTS
Supports for cable trays should provide a strength and working
load capacity sufficient to meet the load requirement of the cable
tray systems.
1. Horizontal and vertical tray supports should provide an
adequate bearing surface for the tray and should have
provisions for holddown clamps or fasteners.
2. In addition, vertical tray supports should provide secured
means for fastening cable trays to supports.
6.4 FITTINGS
Changes in direction should be mechanically continuous and
accomplished by use of fittings having dimensions in accordance
with 2.3.
2- 8
COPE
NEMA Standards
Table 6-1
MAXIMUM SPACING BETWEEN EXPANSION JOINTS THAT PROVIDE
FOR 1" (25.4mm) MOVEMENT
Temp. Differential
F
(C)
Feet
(m)
25
50
75
100
125
150
175
512
256
171
128
102
85
73
(156)
(78.0)
(52.1)
(39.0)
(31.1)
(25.9)
(22.2)
(-4)
(10)
(24)
(38)
(51)
(65)
(79)
Steel
Aluminum
Feet
(m)
260
130
87
65
52
43
37
(79.2)
(39.6)
(26.5)
(19.8)
(15.8)
(13.1)
(11.3)
2-9
STANDARDS
2'0" Max.
[610 mm]
.
ax ]
M m
"
0 m
2' 10
[6
2'0" Max.
[610 mm]
2'0" Max.
[610 mm]
Figure 6-5
STRAIGHT REDUCER
Figure 6-1
HORIZONTAL ELBOWS
2'0" Max.
[610 mm]
2'0" Max.
[610 mm]
3 R
2'0" Max.
[610 mm]
2 L
2'0" Max.
[610 mm]
Figure 6-6
OFFSET REDUCER
Figure 6-2
HORIZONTAL TEE
3 R
2'0" Max.
[610 mm]
= 30, 45, 60, 90
2'0" Max.
[610 mm]
2'0" Max.
[610 mm]
Figure 6-3
HORIZONTAL CROSS
Figure 6-7
VERTICAL ELBOWS
22.5
45
.
ax ]
M m
"
0 m
2' 10
[6
2'0" Max.
[610 mm]
2'0" Max.
[610 mm]
2'0" Max.
[610 mm]
2'0" Max.
[610 mm]
2'0" Max.
[610 mm]
Figure 6-4
HORIZONTAL WYE
2- 1 0
Figure 6-8
VERTICAL TEE
COPE
NEMA Standards
GAP SETTINGS
MIN. TEMP.
MAX. TEMP.
130
50
40
30
110
90
20
70
10
50
30
10
10
20
TE
M
PE
RA
TU
RE
SL
O
PE
10
30
30
40
C
F
0
1 8
1 4
(0.0)
(3.2)
(6.3)
3 8
1 2
5 8
3 4
7 8
Figure 6-9
2-1 1
STANDARDS
2- 1 2
COPE
COPELADDER
3
Cable Ladder System for Power, Control,
Instrumentation Cable & Pneumatic Tubing
Pictorial Index
COPELADDER
STRAIGHT LENGTH
Page 3-11
VERTICAL ELBOWS
Page 3-22 to 3-25
HORIZONTAL ELBOWS
Page 3-12 to 3-15
HORIZONTAL TEE
Page 3-16
VERTICAL TEE
Page 3-27
HORIZONTAL CROSS
Page 3-17
COVERS
Page 3-30
REDUCERS
Page 3-18 to 3-19
COVER ATTACHMENTS
Page 3-31
ADJUSTABLE ELBOWS
Page 3-20
CONNECTORS
Page 3-28
45 "Y" BRANCH
Page 3-21
3-2
COPE LADDER
GENERAL &
TECHNICAL
INFORMATION
COPE LADDER
FITTINGS
COVERS
CONNECTORS
ACCESSORIES
Contents
COPE Ladder
COPELADDER
3-3
Selection Chart:
COPELADDER
Cope Ladder-Aluminum
NEMA CLASS, PHYSICAL AND STRUCTURAL PROPERTIES
NEMA
Standard
VE-1
Load/Span
Class
8A-12A
12B
12C
NEMA
Ld/Span
50 lb./ft.
12' span
75 lb.ft.
12' span
100 lb./ft
12' span
Cope
System
Number
1B38
1B48
3B58
1B68
Cope
Systems
Certified
By CSA
(See pg. 3-9)
1B38
3"
4"
5"
6"
Actual
Load
Depth
(76mm)
(102mm)
(127mm)
(152mm)
Side
Rail
Height
414" (108mm)
514" (133mm)
614" (159mm)
714" (184mm)
Flange
Width
(in.)
1316
1316
1316
1316
Sect. Mod.
of 2
Rails
Sx
(in.3)
0.898
1.142
1.614
1.874
Moment
of
Inertia
Ix
(in.4)
0.911
1.436
2.360
3.284
Min X-Sect.
Area of 2
Rails per
NEC 318-7
(sq. in.)
.60
.60
1.00
1.00
1.148
1.142
1.614
1.874
0.158
1.436
2.360
3.284
.60
.60
1.00
1.00
1.675
1.867
2.933
4.516
1.00
1.00
1.00
1.00
3B38
1B48
3B58
1B68
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
1316
5B38
3B48
5B58
5B68
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
1316
1316
1.646
1.522
1.944
2.576
1316
1316
1316
1316
1316
16A
50 lb./ft.
16' span
5B38
7448
1D58
5D68
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
1316
114
114
114
1.646
2.396
2.378
4.874
1.675
3.146
3.601
8.594
1.00
1.50
1.00
2.00
16B
75 lb./ft.
16' span
3D38
7448
1D58
5D68
3D38
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
114
114
114
114
2.242
2.396
2.378
4.874
2.203
3.146
3.601
8.594
1.50
1.50
1.00
2.00
16C
100 lb./ft.
16' span
5D38
3D48
5D58
5D68
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
114
114
114
114
2.782
3.434
3.542
4.874
2.869
4.373
5.374
8.594
1.50
2.00
2.00
2.00
20A
50 lb./ft.
20' span
3D38
7448
1D58
5D68
3D38
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
114
114
114
114
2.242
2.396
2.378
4.874
2.203
3.146
3.601
8.594
1.50
1.50
1.00
2.00
20B
75 lb./ft.
20' span
3D48
5D58
5D68
4"
5"
6"
(102mm)
(127mm)
(152mm)
514"
614"
714"
(133mm)
(159mm)
(184mm)
114
114
114
3.434
3.542
4.874
4.373
5.374
8.594
2.00
2.00
2.00
20C
100 lb./ft.
20' span
5E38
5D48
7D58
5D68
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
112
114
114
114
3.716
3.910
4.186
4.874
3.879
5.010
6.012
8.594
2.00
2.00
2.00
2.00
3658
5"
6"
(127mm)
(152mm)
614"
714"
(159mm)
(184mm)
134
112
3.490
3.252
5.453
5.726
1.50
1.50
EXTRA HEAVY DUTY - VERY LONG SPAN TRAYS- 6", 9" OR 12" RUNG SPACING
9D58
5" (127mm)
7G58
5" (127mm)
614"
614"
(159mm)
(159mm)
114
2
5.130
5.804
7.850
8.728
2.00
2.00
3-4
COPE LADDER
Selection Chart:
COPELADDER
Cope Ladder-Aluminum
LOAD AND DEFLECTION DATA FOR ALUMINUM LADDER
Working (Allowable) Load Capacity, Evenly Distributed-Tested per NEMA Standard VE-1,
Simple Beam - SAFETY FACTOR 1.5
6 Ft. Span
8 Ft. Span
10 Ft. Span
w
222
324
359
416
d
.35
.33
.22
.18
k
.002
.001
w
125
125
191
221
d
.63
.59
.37
.31
k
w
.005 80
.003 117
.002 115
.001 133
3B38
1B48
3B58
1B68
354
324
359
416
.45
.33
.22
.18
.001
.001
191
182
191
221
.76
.59
.37
.31
5B38
3B48
5B58
5B68
448
394
480
540
.39
.31
.24
.17
251
222
257
286
5B38
7448
1D58
5D68
16 Ft. Span
k
.012
.007
.005
.003
w
55
77
75
87
d
1.42
1.26
.74
.62
k
.026
.016
.010
.007
.004
.003
.002
.001
78
77
75
87
1.57
1.26
.74
.62
.020
.016
.010
.007
.69
.55
.40
.29
.003
.002
.002
.001
251
349
380
.69
.51
.49
2.26
1.85
1.61
1.38
.044 25
.023 51
.021 50
.009 103
2.75
2.89
2.51
2.16
.110
.057
.050
.021
3D38
7448
1D58
5D68
342
349
380
.72
.51
.49
2.74
1.85
1.61
1.38
.033 52
.023 51
.021 50
.009 103
4.27
2.89
2.51
2.16
.082
.057
.050
.021
5D38
3D48
5D58
5D68
444
525
.71
.55
.002 284
.001 336
106
119
116
161
2.73
2.01
1.60
1.38
.026 65
.017 76
.014 75
.009 103
4.07
3.14
2.50
2.16
.063
.041
.033
.021
3D38
7448
1D58
5D68
2.74
1.85
1.61
1.38
.033 52
.023 51
.021 50
.009 103
4.27
2.89
2.51
2.16
.082
.057
.050
.021
3D48
5D58
5D68
404
.70
.86
.76
.008
.005
.004
.003
20 Ft. Span
d
5E38
5D48
7D58
5D68
d
.99
.87
.55
.46
12 Ft. Span
.019
.015
.012
.009
103
100
101
103
4.79
3.59
3.02
2.16
77
76
2.55 .033
2.39 .032
24 Ft. Span
w
25 Ft. Span
w
COPE Ladder
Cope
Sys.
No.
1B38
1B48
3B58
1B68
.047
.036
.030
.021
3658
1E68
215
221
9D58
7G58
412 1.22 .003 214 2.00 .009 131 3.01 .023 68 3.23 .048
451 1.20 .003 253 2.14 .008 162 3.35 .020 112 4.79 .043 104 5.24 .050
3-5
Selection Chart:
COPELADDER
Cope Ladder-Steel
NEMA CLASS, PHYSICAL AND STRUCTURAL PROPERTIES
NEMA
Standard
VE-1
Class
8A-12B
12C
16A
NEMA
Load/Span
75 lb./ft.
12' span
100 lb./ft.
12' span
50 lb./ft.
16' span
Type
304 SS
System
Number
Cope
Systems
Certified
By CSA
Actual
Load Depth
Side
Rail Height
Flange
Width
(in.)
8B36
8246
8256
8B66
8B37
8247
8257
8B67
8B3T
824T
825T
8B6T
8B37
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
1316
6B36
8B46
6256
8B66
6B37
8B47
6257
8B67
6B3T
8B4T
625T
8B6T
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
1316
8D36
8D46
8456
6466
8D37
8D47
8457
6467
8D3T
8D4T
845T
646T
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
514"
Section
Modulus
of 2 Rails
Sx
(in.3 )
0.678
0.816
1.072
1.574
0.685
1.071
1.676
2.758
.40
.40
.70
.70
1316
0.834
0.924
1.330
1.574
0.845
1.162
2.079
2.758
.70
.40
.70
.70
114
114
114
114
0.852
1.146
1.330
2.062
0.868
1.447
2.078
3.739
.40
.70
.70
1.00
1316
1316
1316
1316
1316
16B
75 lb./ft.
16' span
6D36
8D46
6456
6466
6D37
8D47
6457
6467
6D3T
8D4T
645T
646T
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
114
114
114
114
1.056
1.146
1.652
2.062
1.076
1.447
2.580
3.739
.70
.70
1.00
1.00
16C
100 lb./ft.
16' span
4D36
6446
6456
8D66
4D37
6447
6457
8D67
4D3T
644T
645T
8D6T
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
114
114
114
114
1.298
1.280
1.652
1.814
1.326
1.680
2.580
3.185
1.00
.70
1.00
.70
20A
50 lb./ft.
20' span
6D36
6446
6456
6466
6D37
6447
6457
6467
6D3T
644T
645T
646T
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
114
114
114
114
1.056
1.280
1.652
2.062
1.076
1.680
2.580
3.739
.70
.70
1.00
1.00
20B
75 lb./ft.
20' span
2D36
4D46
6D56
6D66
2D37
4D47
6D57
6D67
2D3T
4D4T
6D5T
6D6T
6D57
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
414"
514"
614"
714"
(108mm)
(133mm)
(159mm)
(184mm)
114
114
114
114
1.758
1.744
1.814
2.246
1.802
2.209
2.743
3.951
1.00
1.00
1.00
1.00
20C
100 lb./ft.
20' span
2D46
4D56
4466
2D47
4D57
4467
2D4T
4D5T
446T
4"
5"
6"
(102mm)
(127mm)
(152mm)
514"
614"
714"
(133mm)
(159mm)
(184mm)
114
114
114
2.370
2.240
2.556
3.013
3.389
4.632
1.50
1.00
1.00
4B3T
6B4T
4B4T
3"
4"
4"
(76mm)
(102mm)
(102mm)
414"
514"
514"
(108mm)
(133mm)
(133mm)
1316
1316
1.024
1.140
1.402
1.039
1.436
1.769
.70
.70
1.00
EXTRA HEAVY DUTY - VERY LONG SPAN TRAYS- 6", 9" OR 12" RUNG SPACING
2D56
2D57 2D5T
5"
(127mm)
11D56 11D57 11D5T
5"
(127mm)
614"
614"
(159mm)
(159mm)
114
114
3.052
3.536
4.635
5.315
1.50
1.50
Note:
3-6
1316
COPE LADDER
Selection Chart:
COPELADDER
Cope Ladder-Steel
LOAD AND DEFLECTION DATA FOR STEEL LADDER
Working (Allowable) Load Capacity, Evenly Distributed-Tested per NEMA Standard VE-1,
Simple Beam - SAFETY FACTOR 1.5
6 Ft. Span
8 Ft. Span
10 Ft. Span
12 Ft. Span
16 Ft. Span
20 Ft. Span
Cope
System
Numbers
8B36/8B37/8B3T
8246/8247/824T
8256/8257/825T
8B66/8B67/8B6T
360
383
357
680
.26
.18
.11
.12
198
210
194
328
6B36/6B37/6B3T
8B46/8B47/8B4T
6256/6257/625T
8B66/8B67/8B6T
453
456
460
680
.27
.20
.11
.12
249
244
250
328
84
83
79
107
.98
.62
.38
.31
.012
.007
.005
.003
106
103
103
107
1.00
.71
.40
.31
.009
.007
.004
.003
8D36/8D37/8D3T
8D46/8D47/8D4T
8456/8457/845T
6466/6467/643T
1.17
.94
.43
.38
.009
.006
.004
.002
65 1.91 .029
86 1.54 .018
58 .71 .012
93 .62 .007
6D36/6D37/6D3T
8D46/8D47/8D4T
6456/6457/645T
6466/6467/643T
1.27
.94
.76
.38
.008
.006
.003
.002
88
86
123
93
2.08
1.54
1.22
.62
.024
.018
.010
.007
4D36/4D37/4D3T
6446/6447/644T
6456/6457/645T
8D66/8D67/8D6T
487
444
574
504
216
186
245
202
1.31
.89
.76
.51
.006
.005
.003
.003
113
100
123
101
2.16
1.51
1.22
.80
.019
.015
.010
.008
6D36/6D37/6D3T
6446/6447/644T
6456/6457/645T
6466/6467/643T
169
186
245
178
1.27
.89
.76
.38
.008
.005
.003
.002
88
100
123
93
2.08
1.51
1.22
.62
.024
.015
.010
.007
52 2.98 .057
53 1.94 .037
66 1.59 .024
55 .91 .017
2D36/2D37/2D3T
4D46/4D47/4D4T
6D56/6D57/6D5T
6D66/6D67/6D6T
304
280
269
291
1.36
1.02
.80.
.59
.004
.004
.003
.002
159
145
139
148
2.24
1.67
1.28
.95
.014
.012
.009
.006
94
85
81
85
2D46/2D47/2D4T
4D56/4D57/4D5T
4466/4467/446T
25 Ft. Span
COPE Ladder
4B36/4B37/4B3T
6B46/6B47/6B4T
4B46/4B47/4B4T
24 Ft. Span
3.23
2.40
1.82
1.33
.034
.028
.022
.016
2D56/2D57/2D5T
11D56/11D57/11D5T
490 .85 .002 254 1.40 .006 149 2.00 .013 79 1.91 .024 73 2.38 .033
434 .66 244 1.17 .005 156 1.82 .012 108 2.62 .024 100 2.85 .029
3-7
Ordering Information
COPELADDER
HOW TO ORDER:
Order by the Cope full catalog numbers given in this catalog. Please pay careful attention to the part numbering structure. Example:
Catalog No. 1B48-06SL-12-09 is a 4" load depth aluminum ladder wtih a 1316" flange, 6 inches wide, straight length 12 feet long,
rungs on 9" centers.
STRAIGHT LENGTH
FITTINGS
Prefix No.
System No.
1B48-06SL-12-09
Side Rail
Thickness
Rung
Spacing
Flange
Width
Load
Depth
Material
Finish
Length (Feet)
Basic Part
Width
System Number
Thickness Steel (Ga.)
8 - 18 ga.
6 - 16 ga.
4 - 14 ga.
2 - 12 ga.
11 - 11 ga.
Flange Width
2 - 1316" (21mm)
4 - 114" (32mm)
5 - 112" (38mm)
6 - 134" (45mm)
7 - 2"
(51mm)
*B - 1316"
*D - 114"
*E - 112"
*F - 134"
*G - 2"
Load Depth
3" (76mm)
4" (102mm)
5" (127mm)
6" (152mm)
Material Finish
6 - Mill-Galv.
7 - HDGAF
8 - Aluminum
T - 304SS
(21mm)
(32mm)
(38mm)
(45mm)
(51mm)
3-8
248-069F-12
Flange
Width
Radius (Inches)
Load
Depth
Material
Finish
Basic Part
Width
Description
Width (in.)
-06=6" (152mm)
-09=9" (229mm)
-12=12" (305mm)
-18=18" (457mm)
-24=24" (610mm)
-30=30" (762mm)
-36=36" (914mm)
COPE LADDER
COPELADDER
CSA
Cope
Class
System
See CSA
Certified
Std. C22.2
by CSA
ALUMINUM- Safety
C1
1B38
D1
3D38
E
3658
Load
Side Rail
Flange
Depth
Height
Width
Factor: 1.5
3"
(76mm) 414"
(108mm) 1316"
(21mm)
3"
(76mm) 414"
(108mm) 114"
(32mm)
5" (127mm) 614"
(159mm) 134"
(45mm)
(21mm)
(32mm)
CSA LOADS
Cope systems given in these charts are for projects that require
cabletroughs certified by the Canadian Standards Association
standard number C22.2 No. 126. Where CSA C22.2 is not
mandatory you may want to consider one of the other Cope
systems offered on the selection charts (page 3-4 & 3-6). Loads for
CSA classes C1, D1, and E when supported on shorter spans are
given in the following chart:
FACTOR OF SAFETY: 1.5
CLASS
1.5M
2.0M
C1
D1
E
259
-
164
-
2.5M
3.0M
4.0M
5.0M
6.0M
119
-
97
179
299
113
189
82
137
67
112
Max.Load
(Kg/m2)
Maximum
Support
Span
Deflection
Meets
CSA
Elec.
Tests
97
67
112
3m
6m
6m
19.3mm
88.7mm
60.4mm
Yes
Yes
Yes
97
112
3m
6m
8.9mm
41.4mm
Yes
Yes
COPE Ladder
NOTE: For other CSA approved systems please contact the factory.
3-9
Ordering Information
COPELADDER
STRAIGHT LENGTH
FITTINGS
Prefix No.
System No.
1B38-06SL-10-09
Side Rail
Thickness
Rung
Spacing
Flange
Width
Load
Depth
Material
Finish
Length (Feet)
Basic Part
8 - 18 ga.
6 - 16 ga.
(21mm)
6 - 134" (45mm)
*B - 1316" (21mm)
Thickness Alum (in.)** *D - 114" (32mm)
1- thinner
Load Depth
Material Finish
3" (76mm)
5" (127mm)
7 - HDGAF,
CSA Class 1
8 - Aluminum
Plain Finish
3- thicker
*Stiffened Upper Flange
**Alum. extruded side rails are individually engineered to loads and spans.
3-1 0
Radius (Inches)
Basic Part
Width
System Number
2 - 1316"
Flange
Width
Load
Depth
Material
Finish
Width
238-069F-12
Description
Width (in.)
06=6" (152mm)
09=9" (229mm)
12=12" (305mm)
18=18" (457mm)
24=24" (610mm)
30=30" (762mm)
36=36" (914mm)
Rung Spacing
06=6" (152mm)
09=9" (229mm)
12=12" (305mm)
Radius (in.)
12=12" (305mm)
24=24" (610mm)
36=36" (914mm)
COPE LADDER
Cope Ladder
COPELADDER
RUNG
RUNG SPACING
(center-to-center)
STRAIGHT LENGTH
Part No. SL
SIDE RAIL
LOAD
DEPTH
TOP FLANGE
(stiffened type shown)
BOTTOM FLANGE
LENGTH
System
Width
Basic No.
Rung Length
Spacing
SL
See
Pages
3-4 3-7
-06=6" (152mm)
-09=9" (229mm)
-12=12" (305mm)
-18=18" (457mm)
-24=24" (610mm)
-30=30" (762mm)
-36=36" (914mm)
NEMA
12' (3.7m)*
24' (7.3m)*
-06=6" (152mm)
-09=9" (229mm)
-12=12" (305mm)
-18=18" (457mm)
WIDTH
CSA
-10' (3m)
-20' (6m)
*12' all NEMA Classes, 24' NEMA Classes 16A, 16B, 16C, 20A, 20B, 20C.
Example: Catalog No. 1B48-06SL-12-09 is a 4-inch load depth aluminum ladder with a 1316" flange,
6 inches wide, straight length 12 feet long, rungs on 9" centers.
Conversion Table
English
Metric (mm)
6"
152
9"
229
12"
305
18"
457
24"
610
CSA
30"
762
36"
914
3" (76mm)
and
4" (102mm)
414" (108mm)
and
514" (133mm)
5" (127mm)
and
6" (152mm)
20'
6m
614" (159mm)
and
714" (184mm)
Rungs
Splice Plate
Finish
Connector
Bolts
Bolt Plating
Covers
Pre-Galvanized Steel
ASTM A-653-G90 CQ (18 & 16 Gage)
ASTM A-653-G90 CQ (14 & 12 Gage)
ASTM A-653-G90 CQ
ASTM A-569
ASTM A-591 Class C
SAE J429 Grade 1
(ASTM A-307 Grade A)
ASTM B-633.0002" Zinc
ASTM A-653-G90 CQ
Aluminum
AA-6063-T6 Extruded
AA-6063-T6 Extruded*
AA-5052-H34
3-1 1
COPE Ladder
Catalog Number
SIDE RAIL
HEIGHT
90 Horizontal Elbow
COPELADDER
Part No. 9F
A
R
A
W
COPE FITTINGS are offered in 12", 24", and 36" radius. Use Adjustable Connectors for
odd angles. Nominal 9" rung spacing maintained through centerline of all fittings.
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
Catalog Number
A Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 069F-12
Prefix- 099F-12
Prefix- 129F-12
15"
1612"
18"
(381mm)
(419mm)
(457mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 189F-12
Prefix- 249F-12
Prefix- 309F-12
21"
24"
27"
(533mm)
(610mm)
(686mm)
36"
(914mm)
Prefix- 369F-12
30"
(762mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 069F-24
Prefix- 099F-24
Prefix- 129F-24
27"
2812"
30"
(686mm)
(724mm)
(762mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 189F-24
Prefix- 249F-24
Prefix- 309F-24
33"
36"
39"
(838mm)
(914mm)
(991mm)
36"
(914mm)
Prefix- 369F-24
42"
(1067mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 069F-36
Prefix- 099F-36
Prefix- 129F-36
39"
4012"
42"
(991mm)
(1029mm)
(1067mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 189F-36
Prefix- 249F-36
Prefix- 309F-36
45"
48"
51"
(1143mm)
(1219mm)
(1295mm)
36"
(914mm)
Prefix- 369F-36
54"
(1372mm)
Example: 238-129F-12
3-1 2
COPE LADDER
60 Horizontal Elbow
COPELADDER
Part No. 6F
60
R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Catalog Number
A Dimension
B Dimension
6"
9"
12"
Width - W
(152mm)
(229mm)
(305mm)
Prefix- 066F-12
Prefix- 096F-12
Prefix- 126F-12
13"
1414"
1558"
(330mm)
(362mm)
(397mm)
712"
814"
9"
(191mm)
(210mm)
(229mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 186F-12
Prefix- 246F-12
Prefix- 306F-12
1814"
2034"
2338"
(464mm)
(527mm)
(594mm)
1012"
12"
1312"
(267mm)
(305mm)
(343mm)
36"
(914mm)
Prefix- 366F-12
26"
(660mm)
15"
(381mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
2338"
2434"
26"
(594mm)
(629mm)
(660mm)
1312"
1414"
15"
(343mm)
(362mm)
(381mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 186F-24
Prefix- 246F-24
Prefix- 306F-24
2858"
3114"
3334"
(727mm)
(794mm)
(857mm)
1612"
18"
1912"
(416mm)
(457mm)
(495mm)
36"
(914mm)
3638"
(924mm)
21"
(533mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 066F-36
Prefix- 096F-36
Prefix- 126F-36
3334"
3518"
3638"
(857mm)
(892mm)
(924mm)
1912"
2014"
21"
(495mm)
(514mm)
(533mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 186F-36
Prefix- 246F-36
Prefix- 306F-36
39"
4158"
4418"
(991mm)
(1057mm)
(1121mm)
2212"
24"
2512"
(572mm)
(610mm)
(648mm)
36"
(914mm)
Prefix- 366F-36
4634"
(1187mm)
27"
(686mm)
Example: 238-126F-12
3-1 3
COPE Ladder
45 Horizontal Elbow
COPELADDER
PART NO. 4F
45
A
R
W
12"
(305mm)
24"
(610mm)
36"
(914mm)
3-1 4
Width - W
6"
(152mm)
9"
(229mm)
12"
(305mm)
18"
(457mm)
24"
(610mm)
30"
(762mm)
36"
(914mm)
6"
9"
12"
18"
24"
30"
36"
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
6"
(152mm)
9"
(229mm)
12"
(305mm)
18"
(457mm)
24"
(610mm)
30"
(762mm)
36"
(914mm)
Example: 238-124F-12
Catalog Number
Prefix- 064F-12
Prefix- 094F-12
Prefix- 124F-12
Prefix- 184F-12
Prefix- 244F-12
Prefix- 304F-12
Prefix- 364F-12
A Dimension
1058"
(270mm)
1158"
(295mm)
1234"
(324mm)
1478"
(378mm)
17"
(432mm)
1918"
(486mm)
2114"
(540mm)
B Dimension
438"
(111mm)
478"
(124mm)
514"
(133mm)
618"
(156mm)
7"
(178mm)
778"
(200mm)
834"
(222mm)
Prefix- 064F-24
Prefix- 094F-24
Prefix- 124F-24
Prefix- 184F-24
Prefix- 244F-24
Prefix- 304F-24
Prefix- 364F-24
1918"
2018"
2114"
2338"
2512"
2758"
2934"
(486mm)
(511mm)
(540mm)
(594mm)
(648mm)
(702mm)
(756mm)
778"
838"
834"
958"
1012"
1112"
1238"
(200mm)
(213mm)
(222mm)
(244mm)
(267mm)
(292mm)
(314mm)
Prefix- 064F-36
Prefix- 094F-36
Prefix- 124F-36
Prefix- 184F-36
Prefix- 244F-36
Prefix- 304F-36
Prefix- 364F-36
2758"
2858"
2934"
3178"
34"
3618"
3814"
(702mm)
(727mm)
(756mm)
(810mm)
(864mm)
(918mm)
(972mm)
1112"
1178"
1238"
1314"
1418"
15"
1578"
(292mm)
(302mm)
(314mm)
(337mm)
(359mm)
(381mm)
(403mm)
COPE LADDER
30 Horizontal Elbow
COPELADDER
PART NO. 3F
30
A
R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
6"
(152mm)
9"
(229mm)
12"
(305mm)
18"
(457mm)
24"
(610mm)
30"
(762mm)
36"
(914mm)
6"
9"
12"
18"
24"
30"
36"
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
6"
(152mm)
9"
(229mm)
12"
(305mm)
18"
(457mm)
24"
(610mm)
30"
(762mm)
36"
(914mm)
Example: 238-123F-12
Catalog Number
Prefix- 063F-12
Prefix- 093F-12
Prefix- 123F-12
Prefix- 183F-12
Prefix- 243F-12
Prefix- 303F-12
Prefix- 363F-12
A Dimension
712"
(191mm)
814"
(210mm)
9"
(229mm)
1012"
(267mm)
12"
(305mm)
1312"
(343mm)
15"
(381mm)
B Dimension
2"
(51mm)
214"
(57mm)
238"
(60mm)
278"
(73mm)
314"
(83mm)
358"
(92mm)
4"
(102mm)
Prefix- 063F-24
Prefix- 093F-24
Prefix- 123F-24
Prefix- 183F-24
Prefix- 243F-24
Prefix- 303F-24
Prefix- 363F-24
1312"
1414"
15"
1612"
18"
1912"
21"
(343mm)
(362mm)
(381mm)
(419mm)
(457mm)
(495mm)
(533mm)
358"
378"
4"
438"
478"
514"
558"
(92mm)
(98mm)
(102mm)
(111mm)
(124mm)
(133mm)
(143mm)
Prefix- 063F-36
Prefix- 093F-36
Prefix- 123F-36
Prefix- 183F-36
Prefix- 243F-36
Prefix- 303F-36
Prefix- 363F-36
1912"
2014"
21"
2212"
24"
2512"
27"
(495mm)
(514mm)
(533mm)
(572mm)
(610mm)
(648mm)
(686mm)
514"
512"
558"
6"
612"
678"
714"
(133mm)
(140mm)
(143mm)
(152mm)
(165mm)
(175mm)
(184mm)
3-1 5
COPE Ladder
Horizontal Tee
COPELADDER
PART NO. FT
B
A
W
C
A
R
12"
(305mm)
24"
(610mm)
36"
(914mm)
3-1 6
Width - W
6"
(152mm)
9"
(229mm)
12"
(305mm)
18"
(457mm)
24"
(610mm)
30"
(762mm)
36"
(914mm)
Catalog Number
Prefix- 06FT-12
Prefix- 09FT-12
Prefix- 12FT-12
Prefix- 18FT-12
Prefix- 24FT-12
Prefix- 30FT-12
Prefix- 36FT-12
A Dimension
15"
(381mm)
1612"
(419mm)
18"
(457mm)
21"
(533mm)
24"
(610mm)
27"
(686mm)
30"
(762mm)
B Dimension
30"
(762mm)
33"
(838mm)
36"
(914mm)
42"
(1067mm)
48"
(1219mm)
54"
(1372mm)
60"
(1524mm)
C Dimension
18"
(457mm)
21"
(533mm)
24"
(610mm)
30"
(762mm)
36"
(914mm)
42"
(1067mm)
48"
(1219mm)
6"
9"
12"
18"
24"
30"
36"
Prefix- 06FT-24
Prefix- 09FT-24
Prefix- 12FT-24
Prefix- 18FT-24
Prefix- 24FT-24
Prefix- 30FT-24
Prefix- 36FT-24
27"
2812"
30"
33"
36"
39"
42"
(686mm)
(724mm)
(762mm)
(838mm)
(914mm)
(991mm)
(1067mm)
54"
57"
60"
66"
72"
78"
84"
(1372mm)
(1448mm)
(1524mm)
(1676mm)
(1829mm)
(1981mm)
(2134mm)
30"
33"
36"
42"
48"
54"
60"
(762mm)
(838mm)
(914mm)
(1067mm)
(1219mm)
(1372mm)
(1524mm)
Prefix- 06FT-36
Prefix- 09FT-36
Prefix- 12FT-36
Prefix- 18FT-36
Prefix- 24FT-36
Prefix- 30FT-36
Prefix- 36FT-36
39"
4012"
42"
45"
48"
51"
54"
(991mm)
(1029mm)
(1067mm)
(1143mm)
(1219mm)
(1295mm)
(1372mm)
78"
81"
84"
90"
96"
102"
108"
(1981mm)
(2057mm)
(2134mm)
(2286mm)
(2438mm)
(2591mm)
(2743mm)
42"
45"
48"
54"
60"
66"
72"
(1067mm)
(1143mm)
(1219mm)
(1372mm)
(1524mm)
(1676mm)
(1829mm)
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
6"
(152mm)
9"
(229mm)
12"
(305mm)
18"
(457mm)
24"
(610mm)
30"
(762mm)
36"
(914mm)
Example: 238-12FT-12
COPE LADDER
Horizontal Cross
COPELADDER
PART NO. FC
A
B
A
R
7 8 "
SQUARE RUNG
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
6"
(152mm)
9"
(229mm)
12"
(305mm)
18"
(457mm)
24"
(610mm)
30"
(762mm)
36"
(914mm)
Catalog Number
Prefix- 06 FC-12
Prefix- 09 FC-12
Prefix- 12 FC-12
Prefix- 18 FC-12
Prefix- 24 FC-12
Prefix- 30 FC-12
Prefix- 36 FC-12
A Dimension
15"
(381mm)
1612"
(419mm)
18"
(457mm)
21"
(533mm)
24"
(610mm)
27"
(686mm)
30"
(762mm)
B Dimension
30"
(762mm)
33"
(838mm)
36"
(914mm)
42"
(1067mm)
48"
(1219mm)
54"
(1372mm)
60"
(1524mm)
6"
9"
12"
18"
24"
30"
36"
Prefix- 06 FC-24
Prefix- 09 FC-24
Prefix- 12 FC-24
Prefix- 18 FC-24
Prefix- 24 FC-24
Prefix- 30 FC-24
Prefix- 36 FC-24
27"
2812"
30"
33"
36"
39"
42"
(686mm)
(724mm)
(762mm)
(838mm)
(914mm)
(991mm)
(1067mm)
54"
57"
60"
66"
72"
78"
84"
(1372mm)
(1448mm)
(1524mm)
(1676mm)
(1829mm)
(1981mm)
(2134mm)
Prefix- 06 FC-36
Prefix- 09 FC-36
Prefix- 12 FC-36
Prefix- 18 FC-36
Prefix- 24 FC-36
Prefix- 30 FC-36
Prefix- 36 FC-36
39"
4012"
42"
45"
48"
51"
54"
(991mm)
(1029mm)
(1067mm)
(1143mm)
(1219mm)
(1295mm)
(1372mm)
78"
81"
84"
90"
96"
102"
108"
(1981mm)
(2057mm)
(2134mm)
(2286mm)
(2438mm)
(2591mm)
(2743mm)
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
6"
(152mm)
9"
(229mm)
12"
(305mm)
18"
(457mm)
24"
(610mm)
30"
(762mm)
36"
(914mm)
Example: 238-12FC-12
3-1 7
COPE Ladder
Straight Reducer
COPELADDER
PART NO. ST
W1
12
W
Straight (ST)
Width - W1
Cat. No.-Straight
A Dimension
30"
24"
18"
(762mm)
(610mm)
(457mm)
Prefix-36ST-30
Prefix-36ST-24
Prefix-36ST-18
3"
6"
9"
(76mm)
(152mm)
(229mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
Prefix-36ST-12
Prefix-36ST-09
Prefix-36ST-06
12"
1312"
15"
(305mm)
(343mm)
(381mm)
24"
18"
12"
(610mm)
(457mm)
(305mm)
Prefix-30ST-24
Prefix-30ST-18
Prefix-30ST-12
3"
6"
9"
(76mm)
(152mm)
(229mm)
9"
6"
(229mm)
(152mm)
Prefix-30ST-09
Prefix-30ST-06
1012"
12"
(267mm)
(304mm)
18"
12"
9"
(457mm)
(305mm)
(229mm)
Prefix-24ST-18
Prefix-24ST-12
Prefix-24ST-09
3"
6"
712"
(76mm)
(152mm)
(191mm)
6"
(152mm)
Prefix-24ST-06
9"
(229mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
Prefix-18ST-12
Prefix-18ST-09
Prefix-18ST-06
3"
412"
6"
(76mm)
(114mm)
(152mm)
(305mm)
12"
9"
6"
(229mm)
(152mm)
Prefix-12ST-09
Prefix-12ST-06
112"
3"
(38mm)
(76mm)
9"
6"
(152mm)
Prefix-09ST-06
112"
(38mm)
36"
(914mm)
30"
(762mm)
24"
(610mm)
18"
(457mm)
(229mm)
Example: 238-12ST-06
3-1 8
COPE LADDER
W1
W1
12
12
B
W
Left Hand (LH)
B
W
Right Hand (RH)
Prefix-36LH-30
Prefix-36LH-24
Prefix-36LH-18
Prefix-36RH-30
Prefix-36RH-24
Prefix-36RH-18
6"
12"
18"
(152mm)
(305mm)
(457mm)
15"
12"
9"
(381mm)
(305mm)
(229mm)
30"
24"
18"
(914mm)
(610mm)
(457mm)
Prefix-36LH-12
Prefix-36LH-09
Prefix-36LH-06
Prefix-36RH-12
Prefix-36RH-09
Prefix-36RH-06
24"
27"
30"
(610mm)
(686mm)
(762mm)
6"
412"
3"
(152mm)
(114mm)
(76mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
Prefix-30LH-24
Prefix-30LH-18
Prefix-30LH-12
Prefix-30RH-24
Prefix-30RH-18
Prefix-30RH-12
6"
12"
18"
(152mm)
(305mm)
(457mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
24"
18"
12"
(610mm)
(457mm)
(305mm)
Prefix-30LH-09
Prefix-30LH-06
Prefix-30RH-09
Prefix-30RH-06
21"
24"
(533mm)
(610mm)
412"
3"
(114mm)
(76mm)
9"
6"
(229mm)
(152mm)
Prefix-24LH-18
Prefix-24LH-12
Prefix-24LH-09
Prefix-24RH-18
Prefix-24RH-12
Prefix-24RH-09
6"
12"
15"
(152mm)
(305mm)
(381mm)
9"
6"
412"
(229mm)
(152mm)
(114mm)
18"
12"
9"
(457mm)
(305mm)
(229mm)
Prefix-24LH-06
Prefix-24RH-06
18"
(457mm)
3"
(76mm)
6"
(152mm)
Prefix-18LH-12
Prefix-18LH-09
Prefix-18LH-06
Prefix-18RH-12
Prefix-18RH-09
Prefix-18RH-06
6"
9"
12"
(152mm)
(229mm)
(305mm)
6"
412"
3"
(152mm)
(114mm)
(76mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
(305mm)
12"
Prefix-12LH-09
Prefix-12LH-06
Prefix-12RH-09
Prefix-12RH-06
3"
6"
(76mm)
(152mm)
412"
3"
(114mm)
(76mm)
9"
6"
(229mm)
(152mm)
9"
Prefix-09LH-06
Prefix-09RH-06
3"
(76mm)
(76mm)
6"
(152mm)
36"
(914mm)
30"
(762mm)
24"
(610mm)
18"
(457mm)
A Dim.
B Dim.
3"
W1 Dim.
(229mm)
Example: 238-12LH-06
3-1 9
COPE Ladder
COPELADDER
Adjustable Elbow
COPELADDER
PART NO. AF
A
W
6"
Width - W
A Dimension
Prefix- 06AF
Prefix- 09AF
Prefix- 12AF
6"
9"
12"
(152mm)
(229mm)
(305mm)
8"
11"
14"
(203mm)
(279mm)
(356mm)
Prefix- 18AF
Prefix- 24AF
Prefix- 30AF
18"
24"
30"
(457mm)
(610mm)
(762mm)
20"
26"
32"
(508mm)
(660mm)
(813mm)
Prefix- 36AF
36"
(914mm)
38"
(965mm)
Both rails at hinge break to be bonded if fitting is used as equipment grounding conductor.
Example: 238-12AF
3-2 0
COPE LADDER
45 "Y" Branch
COPELADDER
PART NO. LY AND RY
(RY Shown)
A
C
Prefix- 06LY
Prefix- 09LY
Prefix- 12LY
Prefix- 06RY
Prefix- 09RY
Prefix- 12RY
6"
9"
12"
Width - W
(152mm)
(229mm)
(305mm)
2212"
2634"
31"
A Dim.
(571mm)
(679mm)
(787mm)
1614"
2138"
2612"
B Dim.
(413mm)
(543mm)
(673mm)
914"
91316"
1012"
C Dim.
(289mm)
(330mm)
(375mm)
1118"
1334"
1614"
D Dim.
(283mm)
(349mm)
(412mm)
Prefix- 18LY
Prefix- 24LY
Prefix- 30LY
Prefix- 18RY
Prefix- 24RY
Prefix- 30RY
18"
24"
30"
(457mm)
(610mm)
(762mm)
3912"
48"
5638"
(1003mm)
(1219mm)
(1432mm)
3634"
47"
5714"
(933mm)
(1193mm)
(1454mm)
1134"
13"
1418"
(460mm)
(546mm)
(629mm)
2138"
2612"
3158"
(543mm)
(673mm)
(803mm)
Prefix- 36LY
Prefix- 36RY
36"
(914mm)
65"
(1651mm)
6712"
(1714mm)
1512"
(718mm)
3634"
(933mm)
Example: 238-12RY
3-2 1
COPE Ladder
8"
90 Vertical Elbow
COPELADDER
PART NO. 9O (OUTSIDE)
A
A
90
R
H
12"
(305mm)
24"
(610mm)
36"
(914mm)
H Dim.
A Dim.
414"
514"
(108mm)
(133mm)
Prefix- (W)9I-12
Prefix- (W)9I-12
Prefix- (W)9O-12
Prefix- (W)9O-12
1418"
1458"
(359mm)
(372mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)9I-12
Prefix- (W)9I-12
Prefix- (W)9O-12
Prefix- (W)9O-12
1518"
1558"
(384mm)
(397mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)9I-24
Prefix- (W)9I-24
Prefix- (W)9O-24
Prefix- (W)9O-24
2618"
2658"
(664mm)
(676mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)9I-24
Prefix- (W)9I-24
Prefix- (W)9O-24
Prefix- (W)9O-24
2718"
2758"
(689mm)
(702mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)9I-36
Prefix- (W)9I-36
Prefix- (W)9O-36
Prefix- (W)9O-36
3818"
3858"
(969mm)
(981mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)9I-36
Prefix- (W)9I-36
Prefix- (W)9O-36
Prefix- (W)9O-36
3918"
3958"
(994mm)
(1007mm)
Example: 238-129O-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
3-2 2
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
COPE LADDER
60 Vertical Elbow
COPELADDER
PART NO. 6O (OUTSIDE)
A
C
60
12"
(305mm)
24"
(610mm)
36"
(914mm)
H Dim.
A Dim.
B Dim.
C Dim.
Prefix- (W)6I-12
Prefix- (W)6I-12
Prefix- (W)6O-12
Prefix- (W)6O-12
738"
(181mm)
(187mm)
1418"
1258"
(311mm)
(321mm)
718"
514"
(108mm)
(133mm)
1214"
1458"
(359mm)
(372mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)6I-12
Prefix- (W)6I-12
Prefix- (W)6O-12
Prefix- (W)6O-12
1318"
1312"
(334mm)
(343mm)
758"
718"
(194mm)
(200mm)
1518"
1558"
(384mm)
(397mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)6I-24
Prefix- (W)6I-24
Prefix- (W)6O-24
Prefix- (W)6O-24
2258"
2318"
(575mm)
(588mm)
1318"
1338"
(334mm)
(340mm)
2618"
2658"
(664mm)
(676mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)6I-24
Prefix- (W)6I-24
Prefix- (W)6O-24
Prefix- (W)6O-24
2312"
24"
(597mm)
(610mm)
13"
178"
(330mm)
(353mm)
2718"
2758"
(689mm)
(702mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)6I-36
Prefix- (W)6I-36
Prefix- (W)6O-36
Prefix- (W)6O-36
33"
3312"
(838mm)
(851mm)
1918"
1938"
(486mm)
(492mm)
3818"
3858"
(969mm)
(981mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)6I-36
Prefix- (W)6I-38
Prefix- (W)6O-36
Prefix- (W)6O-36
3378"
3438"
(861mm)
(873mm)
1958"
1978"
(499mm)
(505mm)
3918"
3958"
(994mm)
(1007mm)
414"
Example: 238-126O-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
3-2 3
COPE Ladder
45 Vertical Elbow
COPELADDER
PART NO. 4O (OUTSIDE)
45
C
R
H
12"
414"
514"
(108mm)
(133mm)
Prefix- (W)4I-12
Prefix- (W)4I-12
Prefix- (W)4O-12
Prefix- (W)4O-12
10"
1038"
(254mm)
(264mm)
418"
414"
(105mm)
(108mm)
1418"
1458"
(359mm)
(372mm)
(305mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)4I-12
Prefix- (W)4I-12
Prefix- (W)4O-12
Prefix- (W)4O-12
1034"
1118"
(273mm)
(283mm)
412"
458"
(114mm)
(118mm)
1518"
1518"
(384mm)
(397mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)4I-24
Prefix- (W)4I-24
Prefix- (W)4O-24
Prefix- (W)4O-24
1812"
1878"
(470mm)
(480mm)
758"
778"
(194mm)
(200mm)
2618"
2658"
(664mm)
(676mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)4I-24
Prefix- (W)4I-24
Prefix- (W)4O-24
Prefix- (W)4O-24
1914"
1912"
(489mm)
(495mm)
8"
878"
(203mm)
(207mm)
2718"
2758"
(689mm)
(702mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)4I-36
Prefix- (W)4I-36
Prefix- (W)4O-36
Prefix- (W)4O-36
27"
2738"
(686mm)
(695mm)
1118"
1138"
(283mm)
(289mm)
3818"
3858"
(969mm)
(981mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)4I-36
Prefix- (W)4I-36
Prefix- (W)4O-36
Prefix- (W)4O-36
2758"
8"
(702mm)
(711mm)
1112"
1158"
(292mm)
(295mm)
3918"
3958"
(994mm)
(1007mm)
Radius - R
24"
(610mm)
36"
(914mm)
H Dim.
A Dim.
B Dim.
C Dim.
Example: 238-1240-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
3-2 4
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
COPE LADDER
30 Vertical Elbow
COPELADDER
PART NO. 3O (OUTSIDE)
30
A
C
R
12"
(305mm)
24"
(610mm)
36"
(914mm)
H Dim.
A Dim.
B Dim.
C Dim.
Prefix- (W)3I-12
Prefix- (W)3I-12
Prefix- (W)3O-12
Prefix- (W)3O-12
2"
(48mm)
(51mm)
1418"
738"
(181mm)
(187mm)
178"
514"
(108mm)
(133mm)
718"
1458"
(359mm)
(372mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)3I-12
Prefix- (W)3I-12
Prefix- (W)3O-12
Prefix- (W)3O-12
758"
778"
(194mm)
(200mm)
2"
218"
(51mm)
(54mm)
1518"
1558"
(384mm)
(397mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)3I-24
Prefix- (W)3I-24
Prefix- (W)3O-24
Prefix- (W)3O-24
1318"
1338"
(334mm)
(340mm)
312"
358"
(89mm)
(92mm)
2618"
2658"
(664mm)
(676mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)3I-24
Prefix- (W)3I-24
Prefix- (W)3O-24
Prefix- (W)3O-24
1358"
1378"
(346mm)
(353mm)
358"
334"
(92mm)
(95mm)
2718"
2758"
(689mm)
(702mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)3I-36
Prefix- (W)3I-36
Prefix- (W)3O-36
Prefix- (W)3O-36
1918"
1938"
(486mm)
(492mm)
518"
514"
(130mm)
(133mm)
3818"
3858"
(969mm)
(981mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)3I-36
Prefix- (W)3I-36
Prefix- (W)3O-36
Prefix- (W)3O-36
1958"
1978"
(499mm)
(505mm)
514"
538"
(133mm)
(137mm)
3918"
3958"
(994mm)
(1007mm)
414"
Example: 238-1230-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
3-2 5
COPE Ladder
COPELADDER
PART NO. SR
H
A
R
H Dim.
Catalog Number
A Dimension
B Dimension
12"
414"
514"
(108mm)
(133mm)
Prefix- (W)SR-12
Prefix- (W)SR-12
1614"
1714"
(413mm)
(438mm)
1418"
1458"
(359mm)
(371mm)
(305mm)
614"
714"
(159mm)
(814mm)
Prefix- (W)SR-12
Prefix- (W)SR-12
1814"
1914"
(464mm)
(489mm)
1518"
1558"
(384mm)
(397mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)SR-24
Prefix- (W)SR-24
2814"
2914"
(718mm)
(743mm)
2618"
2658"
(664mm)
(676mm)
(610mm)
614"
714"
(159mm)
(814mm)
Prefix- (W)SR-24
Prefix- (W)SR-24
3014"
3114"
(768mm)
(794mm)
2718"
2758"
(689mm)
(702mm)
36"
414"
514"
(108mm)
(133mm)
Prefix- (W)SR-36
Prefix- (W)SR-36
4014"
4114"
(1022mm)
(1048mm)
3818"
3858"
(968mm)
(981mm)
(914mm)
614"
714"
(159mm)
(814mm)
Prefix- (W)SR-36
Prefix- (W)SR-36
4214"
4314"
(1073mm)
(1099mm)
3918"
3958"
(994mm)
(1006mm)
24"
Example: 238-12SR-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
3-2 6
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
COPE LADDER
Vertical Tee
COPELADDER
PART NO. VT
H
B
C
R
H Dim.
Catalog Number
A Dimension
B Dimension
C Dimension
12"
414"
514"
(108mm)
(133mm)
Prefix- (W)VT-12
Prefix- (W)VT-12
2814"
2914"
(718mm)
(743mm)
1614"
1714"
(413mm)
(438mm)
1418"
1458"
(359mm)
(371mm)
(305mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)VT-12
Prefix- (W)VT-12
3014"
3114"
(768mm)
(794mm)
1814"
1914"
(464mm)
(489mm)
1518"
1558"
(384mm)
(397mm)
24"
414"
514"
(108mm)
(133mm)
Prefix- (W)VT-24
Prefix- (W)VT-24
5214"
5314"
(1327mm)
(1353mm)
2814"
2914"
(718mm)
(743mm)
2618"
2658"
(664mm)
(676mm)
(610mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)VT-24
Prefix- (W)VT-24
5414"
5514"
(1378mm)
(1403mm)
3014"
3114"
(768mm)
(794mm)
2718"
2758"
(689mm)
(702mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)VT-36
Prefix- (W)VT-36
7614"
7714"
(1937mm)
(1962mm)
4014"
4114"
(1022mm)
(1048mm)
3818"
3858"
(968mm)
(981mm)
614"
714"
(159mm)
(184mm)
Prefix- (W)VT-36
Prefix- (W)VT-36
7814"
7914"
(1988mm)
(2013mm)
4214"
4314"
(1073mm)
(1099mm)
3918"
3958"
(994mm)
(1006mm)
36"
(914mm)
Example: 238-12VT-12
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
3-2 7
COPE Ladder
Connector Plates
COPELADDER
TRAY CONNECTORS
Catalog Number & Finishes
Catalog Number
Load Depth
3
4
5
6
EXPANSION CONNECTOR
Part No. CE (Sold in pairs)
(2) 716" x 112" SLOTS
Finish
6 (Mill Galv.)
7 (HDGAF)
8 (Alum.)
T (304SS)
Basic Number
-02RC
-02CE
-02CV
-02CH
-02CA
Example: 38 -02RC for 3" load depth, aluminum, universal
curvilinear connector.
Part Nos. CE, CH, and CV to be bonded if used as equipment
grounding conductor.
NOTE: Hole patterns match corresponding tray.
Three-hole pattern illustrated.
Heavy duty, mid span splice plates available upon request.
D
D
6"
6"
90 ANGLE CONNECTOR
Part No. CA (Sold in pairs)
734"
3"
REDUCING CONNECTOR
Part No. CO (Not sold in pairs)
Catalog Number
Load Depth
3"
3"
4"
5"
6"
3"
L.H. OFFSET
REDUCTION
STRAIGHT
REDUCTION
3-2 8
3"
R.H. OFFSET
REDUCTION
Finish
6 (Mill Galv.)
7 (HDGAF)
8 (Alum.)
T (304SS)
30"
27"
24"
21"
18"
15"
1312"
12"
1012"
9"
712"
6"
412"
3"
112"
(762mm)
(686mm)
(610mm)
(533mm)
(457mm)
(381mm)
(343mm)
(305mm)
(267mm)
(229mm)
(191mm)
(152mm)
(114mm)
(76mm)
(38mm)
Example: 38-03CO for 3" load depth, aluminum, 3" Reducer Connector.
Typical Use: 9" to 6", or use 2 for 12" to 6", etc.
COPE LADDER
Hardware
COPELADDER
MATERIAL/FINISH
Electrogalvanized finish standard. Other finishes available; consult factory. *Use following
suffix when applicable - use only where indicated.
No Suffix ..... Electrogalvanized carbon steel only
-HG ............. Hot-dip Galvanized (Except Threaded Rod)
-SS .............. 302/304 Stainless Steel
-S1 .............. 316 Stainless Steel (check factory for availability)
Example: 5112-2-HG, 38 x 112 hex head bolt, hot-dip galvanized
Cat. No.
5002-0-*
5002-1-*
5002-2-*
5002-3-*
5002-4-*
Size
14"
38"
12"
58"
34"
Cat. No.
5006-0-*
5006-1-*
5006-2-*
5006-3-*
5006-4-*
Size
14"
38"
12"
58"
34"
Cat. No.
5007-0-*
5007-1-*
5007-2-*
5007-3-*
5007-4-*
Size
14"
38"
12"
58"
34"
FLAT WASHERS
SPLIT-LOCK WASHERS
COVER SCREW
Part No. EM-CC (electrogalv. steel)
Part No. EM-CC-SS (stainless steel)
No. 10 x 58" long, self drilling-self tapping
hex head plated steel screw.
Suggested spacing:
Indoor: 8 per 12';
Outdoor: 10 per 12'
FENDER WASHERS
Cat. No.
5010-0-*
5010-1-*
5010-2-*
ROD COUPLER
Cat. No.
8195-0-*
8195-1-*
8195-2-*
8195-3-*
8195-4-*
Size
14"
38"
12"
58"
34"
Cat. No.
5001-0-*
5001-1-*
5001-2-*
5001-3-*
5001-4-*
Size
14"
38"
12"
58"
34"
Catalog No.
5100-0
HEX NUTS
Catalog No.
6100-0
Hex Head
Cap Screw
Cat. No.
5100-0-*
5112-0-*
5100-1-*
5112-1-*
5200-1-*
5100-2-*
5112-2-*
5200-2-*
5212-2-*
5300-2-*
5312-2-*
5112-3-*
5200-3-*
5300-3-*
5400-3-*
5200-4-*
5300-4-*
5400-4-*
Round Head
Cap Screw
Cat. No.
6100-0-*
6112-0-*
6100-1-*
6112-1-*
6200-1-*
6100-2-*
6112-2-*
6200-2-*
6212-2-*
6300-2-*
6312-2-*
6112-3-*
6200-3-*
6300-3-*
6400-3-*
6200-4-*
6300-4-*
6400-4-*
Size
(Dia. x Len.)
14" x 1"
14" x 112"
38" x 1"
38" x 112"
38" x 3"
12" x 1"
12" x 112"
12" x 2"
12" x 212"
12" x 3"
12" x 312"
58" x 112"
58" x 2"
58" x 3"
58" x 4"
34" x 2"
34" x 3"
34" x 4"
NOTE: Standard finish is electrogalvanized. Refer to finishes above for specifications of alternate finish or material.
3-2 9
COPE Ladder
CONNECTOR HARDWARE
(Case-hardened steel electrogalvanized)
SQUARE NUTS
Covers
COPELADDER
COVERS for straight sections shown. Standard fitting covers are flat solid type (NF). Aluminum covers are fabricated from 0.040"
aluminum AA-3150-H14; steel covers are fabricated from 20 gage ASTM A-653-G90 CQ, mill-galvanized steel.
FS Flat Solid
w/Flange
NF Flat Solid
PS Peaked Solid
(suffix height)
NL Flat Louvered
FL Louvered
w/Flange
HS Hat (Solid)
HV Hat (Vent)
(suffix height)
Flange
Finish
HS, HV,
FL, FS,
NF, NL,
PS, PF,
PH, PV
2 - 1316"
6 - Mill Galv.
7 - HDGAF
8 - Alum.
T - 304SS
4 - 114"
5 - 112"
6 - 134"
7 - 2"
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
Length
Height*
-12'
-06'
-2*
JOINT PLATE
*peak and hat only, 2" height standard. Consult factory for other heights.
Example: NL46-09SL-12 is a flat louvered mill-galv. steel cover for a 9" wide mill galvanized ladder 12' long with a 114"
flange.
Flange
NF
FS
2 - 1316"
Load Depth
3-3 0
6 - Mill Galv.
7 - HDGAF
8 - Alum.
T - 304SS
Width/Basic No.
Radius
-06 XX**
12"
-09 XX**
24"
-12 XX**
36"
-18 XX**
-24 XX**
-30 XX**
-36 XX**
*Load depth for outside riser or vertical tee only.
**XX from fitting selection pages
EXAMPLE: NF26-369F-24 is a mill galvanized non-flanged solid cover for a 36" wide horizontal 90 elbow with a 24" radius.
4 - 114"
3
4
5
6
Finish
Tray Width
JP-06 = 6"
JP-09 = 9"
JP-12 = 12"
JP-18 = 18"
JP-24 = 24"
JP-30 = 30"
JP-36 = 36"
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
COPE LADDER
Cover Accessories
COPELADDER
COVER CLIP
Part No. CCS-SS (Stainless Steel)
COVER CLIP
Part No. CCS (Electro-Galv. Steel)
Cover
Tray
Flange
Use with any width tray and cover. Not sold in pairs.
Indoor use only. Suggest spacing 6' max.
COPE Ladder
COVER CONNECTOR
Part No. CC (For all covers except hat & peak type)
Catalog Number
Flange
2 - 1316"
4 - 114"
5 - 112"
6 - 134"
7 - 2"
Load
Depth
3
4
5
6
Finish
Width Type
6 - Mill Galv. -06
DC
7 - HDGAF
-09
8 - Alum.
-12
T - 304SS
-18
-24
-30
-36
Catalog Number
For all covers except hat &
peak type. Furnished with:
(2) 14"-20 all-thread rods
(4) hex nuts, flat washers
and lock washers
Suggested spacing:
Indoor: 2 per 12'
Outdoor: 3 per 12'
High Wind: 5 per 12'
Catalog Number
Flange
2 - 1316"
4 - 114"
5 - 112"
6 - 134"
7 - 2"
Load Depth
3
4
5
6
Finish
6 - Mill Galv.
7 - HDGAF
8 - Alum.
T - 304SS
Flange
Finish
2 - 1316"
4 - 114"
5 - 112"
6 - 134"
7 - 2"
6 - Mill Galv.
7 - HDGAF
8 - Alum.
T - 304SS
-24
-30
-36
Width
Type
-06
-09
-12
-18
CC
Catalog Number
Flange
2 - 1316"
4 - 114"
5 - 112"
6 - 134"
7 - 2"
Finish
6 - Mill Galv.
7 - HDGAF
8 - Alum.
T - 304SS
Type
EC
Height*
- Raise* (in.)
3-3 1
Accessories
COPELADDER
ELEVATED COVER CONNECTORS
Part No. EM-CC
#10 x 58"
Self Drilling
Screw
Raise
Catalog Number
Basic Finish
6 (Mill Galv.)
7 (HDGAF)
8 (Alum.)
T (304SS)
Tray Channel
Catalog Number
Finish
Type
Height*
6 - Mill Galv.
EM-CC
- Raise* (in.)
7 - HDGAF
8 - Alum.
T - 304SS
*1", 2" or 3" standard.
Example: 7-EM-CC-2 for hot dipped galvanized,
outdoor, Elevated Cover Connector with a 2" raise
Width
-06DO = 6" (152mm)
-09DO = 9" (229mm)
-12DO = 12" (305mm)
-18DO = 18" (457mm)
-24DO = 24" (610mm)
-30DO = 30" (762mm)
-36DO = 36" (914mm)
BONDING JUMPER
Part No. CBJ
BLIND END
Part No. BE
22 Gage Steel, .040" Aluminum
Catalog No.
CBJ-C
Catalog Number
Load Depth
3
4
5
6
Finish
6(Mill Galv.)
7 (HDGAF)
8 (Alum.)
T (304SS)
Width
-06BE = 6" (152mm)
-09BE = 9" (229mm)
-12BE = 12" (305mm)
-18BE = 18" (457mm)
-24BE = 24" (610mm)
-30BE = 30" (762mm)
-36BE = 36" (914mm)
CBJ-4C
NOTE:
Dimensional Data
AWG 1/0 copper wire
1512" long overall
AWG 4/0 copper wire
1512" long overall
No hardware supplied
UL Listed E-24264
Certified File No. LR 9795
3-3 2
Catalog No.
9056-EP
9057-EP
9056-SS
9057-SS
Capacity
1/0 2/0 3/0
4/0 250 MCM
1/0 2/0 3/0
4/0 250 MCM
Dimensions
1" w x 2" long
1" w x 238" long
1" w x 2" long
1" w x 238" long
COPE LADDER
Accessories
COPELADDER
CONDUIT-TO-CABLE TRAY CLAMP
Size
TB6210
TB6212
12" 34"
CCB-050
CCB-075
CCB-100
CCB-125
CCB-150
CCB-175
CCB-200
Std. Pkg.
50
20
1" 114"
SizeEMT
38" to 12"
12"
34"
34"
1"
114"
112"
2"
1"
114"
112"
2"
BOX CONNECTOR
Part No. CB
14 Gage Steel
.080" Aluminum
NOTE: 14"-20 carriage bolts, flat washers, hex nuts furnished.
COPE Ladder
Catalog No.
Catalog Number
Load Depth Finish
Catalog No.
Size
TB6209
TB6211
TB6214
TB6216
TB6218
12"-34"
3
4
5
6
Std. Pkg.
1"-114"
112"-2"
212"-3"
312"-4"
10
10
5
5
2
Width
6 (Mill Galv.)
7 (HDGAF)
8 (Alum.)
T (304SS)
-06CB = 6"
-09CB = 9"
-12CB = 12"
-18CB = 18"
-24CB = 24"
-30CB = 30"
-36CB = 36"
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
24"
Tray Width
Self-drilling, Self-tapping
Sheet Metal Screws
#EM-CC, (10) Included
Tray-to-Box Connector
(2) Included,
Hardware Included
Wall Thickness
Up to 1'
Solid Bottom
One Piece
Pan Type Tray
Connectors, One
Pair Included
3-3 3
Barrier Strips
COPELADDER
BARRIER STRIPSTRAIGHT SECTION
Part No. SB
6 (Mill Galv.)
7 (HDGAF)
8 (Alum.)
T (304 SS)
Includes: 1 U-Bolt
707981504
2 Acorn Nuts 707671500
Barrier - SB
114"
9"
10 - 24 UNC
Thread
412"
Tray
Rung
Catalog Number
Load Depth Finish
3
4
5
6
6 (Mill Galv.)
7 (HDGAF)
8 (Alum.)
T (304 SS)
COVER SCREW
Part No. EM-CC (electrogalv. steel)
Part No. EM-CC-SS (stainless steel)
Catalog Number
Load Depth Finish
3
4
5
6
6 (Mill Galv.)
7 (HDGAF)
8 (Alum.)
T (304 SS)
Bend (deg.)
90
60
45
30
Basic No.
Radius
Suggested spacing:
Indoor: 8 per 12';
Outdoor: 10 per 12'
3-3 4
COPE LADDER
Accessories
COPELADDER
COMBINATION HOLD-DOWN CLAMP & EXPANSION GUIDE
Catalog No.
9131
9131-DC
Material
Cast Zinc
Dichromate
Plated Zinc
Hardware purchased separately
to suit support system.
238"
.56" Hole
Teeth
Teeth
Firm Connect
Type
Expansion
Catalog No.
6-9052
8-9052
Firm
6-9053
Hold-Down 8-9053
COPE Ladder
EXPANSION GUIDE
Part No. 9052
Expansion
Finish
Elec. Galv.
Cast Alum.
Elec. Galv.
Cast Alum.
CABLE CLAMP
Stainless Steel Part No. SCC
Catalog No.
SCC-150
SCC-250
SCC-400
SCC-450
SCC-600
Clamp Min.
34
158
212
258
414
Clamp Min.
1
1
1
1
1
1
1
1
312
412
5
7
9
1012
12
14
3-3 5
Supports
COPELADDER
VERTICAL SUPPORTS
Catalog No.
9043-37
414" Overall Height Side Members
9043
514" Overall Height Side Members
9025-98
614" & 714" Overall Height Side Members
Ladder Supports can be bolted anywhere along the straight runs. They can be bolted
directly onto the coupler plates at splices of straight runs and riser fittings, or they can be
bolted at any place in the run by field-drilling side rails. Ladder supports are used with
either 38" or 12" hanger rods. Finish is eIectrogalvanized.
GUSSET-TYPE SUPPORTS
Catalog
No.
1332"
x 12" slots
Dimension
B
9702-06
61/2"
41/2"
1
9702-09
9 /2"
41/2"
1
9702-12
6"
12 /2"
41/2"
1
9702-15
9"
15 /2"
41/2"
1
9702-18
12"
18 /2"
6"
9702-24
18"
241/2"
6"
9702-30
24"
301/2"
6"
* Uniform load rating is normally twice the end load rating.
Ladder
Width
End-Load
Rating*
C
3"
3"
3"
3"
41/2"
41/2"
41/2"
450 lbs.
375 lbs.
300 lbs.
260 lbs.
225 lbs.
200 lbs.
175 lbs.
For use with all types of Cope Ladder and Trough systems. Finish
is mill-galvanized. Order hardware separately.
CHANNEL-TYPE SUPPORTS
CHANNEL-TYPE SUPPORTS
2"
2"
13
16"
8 "
4 78"
6 14"
A
3
8"
For use with all types of Cope Ladder and Trough systems.
Finish is mill-galvanized. Order hardware separately.
For use with all types of Cope Ladder and Trough systems.
Finish is mill-galvanized. Order hardware separately.
Ladder Width
Dimension A
9720-12
6"
12"
9720-15
9"
15"
9720-18
12"
18"
9720-24
18"
24"
* Uniform load rating is normally twice the end load rating.
3-3 6
Catalog No.
Ladder Width
Dimension A
9721-24
18"
24"
9721-30
24"
30"
9721-36
30"
36"
9721-42
36"
42"
* Uniform load rating is normally twice the end load rating.
End-Load Rating*
480 lbs.
385 lbs.
320 lbs.
305 lbs.
COPE LADDER
COPELADDER
Catalog
Number
Ladder
Width
Length
L
Dimensions
B
C
9037-12
6"
1214
10"
9037-18
12"
1814"
11"
9037-24
18"
2414"
11"
9037-30
24"
3014"
12"
9037-36
30"
3614"
12"
9037-42
36"
4214"
12"
*Uniform load rating is normally twice the end-load rating.
Finish is hot-dip galvanized after fabrication.
Order hardware separately.
TRAY HANGER
Part No. 7-HGR1 (Steel),
Part No. 8-HGR1 (Aluminum)
(Sold Individually)
6"
7"
7"
8"
8"
8"
2"
212"
212"
4"
4"
4"
End-Load
Rating*
2000 lbs.
2000 lbs.
1600 lbs.
1300 lbs.
1100 lbs.
900 lbs.
Length L
End-Load Rating*
9036-31
24"
3114"
2000 lbs.
9036-37
30"
3714"
1800 lbs.
9036-45
36"
4514"
1500 lbs.
*Uniform load rating is normally twice the end-load rating.
For use with Cope Ladder 24" or wider. May be welded or bolted to building steel.
Finish is hot-dip galvanized after fabrication.
Order hardware separately.
Catalog No.
Basic
No.
M.G.
Finish
H.D.G.
Alum.
Side Rail
414 x 1316
A Dim. B Dim.
90389038-
236
246
237
247
238
248
514 X 1316
2"
2"
4516
5516
90389038-
256
266
257
267
258
268
614 X 1316
714 X 1316
2"
2"
6516
7516
90389038-
436
446
437
447
438
448
414 x 114
514 x 114
2916"
2916"
4516
5516
90389038-
456
466
457
467
458
468
614 x 114
714 x 114
2916"
2916"
6516
7516
3-3 7
COPE Ladder
COPELADDER
SINGLE ROD HANGER SUPPORT
Catalog Number
Assy. Type
P200
Channel Length*
14" (356mm)
17" (432mm)
20" (508mm)
26" (661mm)
32" (813mm)
38" (966mm)
44" (1118mm)
Channel Finish**
GV (Pre-Galv)
HG (Hot Dipped Galv)
Rod Diameter
38=38" (9.53mm)
12=12" (12.7mm)
Rod Length
000 No Rod
036 - 36" (914mm)
072 - 72" (1828mm)
120 - 120" (3048mm)
144 - 144" (3658mm)
Beam Clamp
A - Bridgeport
B - P2622
O - No Clamp
R - Rod Coupler
S - Special
Example: P200-20-GV-12-036-B is a Single 20" pre-galvanized channel with 12" x 36" drop rod and P2622 clamp.
Note: *Order channel length 8" longer than tray width. For example, 44" channel for 36" tray.
** Other channel types and finishes available upon request. Contact factory.
Catalog Number
Assy. Type
Channel Length*
T200E
T201E
16"
19"
22"
28"
34"
40"
46"
(407mm)
(483mm)
(559mm)
(712mm)
(864mm)
(1017mm)
(1169mm)
Channel Finish**
Rod Diameter
Rod Length
Beam Clamp
GV (Pre-Galv)
HG (Hot Dipped Galv)
38=38" (9.53mm)
000 No Rod
036 - 36" (914mm)
072 - 72" (1828mm)
120 - 120"(3048mm)
144 - 144"(3658mm)
A - Bridgeport
B - P2622
O - No Clamp
R - Rod Coupler
S - Special
12=12" (12.7mm)
Example: T200E-22-GV-12-036-B is a Single 22" pre-galvanized channel with 12" x 36" drop rod and P2622 clamp.
Note: *Order channel length 10" longer than tray width. For example, 46" channel for 36" tray.
** Other channel types and finishes available upon request. Contact factory.
3-3 8
COPE LADDER
Metal Framing
COPELADDER
Allied Support Systems offers a complete line of metal framing channel and components. A sample is shown below.
Please contact factory for more information.
CHANNEL STYLES
COPE Ladder
CHANNEL SIZES
Brackets
Concrete
Inserts
Framing
Fittings
Trolleys
Electrical
Fittings
Pipe Rollers
Pipe Hangers
Pipe Clamps
Post Bases
Spring Nuts
3-3 9
Rollers
COPELADDER
Cope cable rollers are easily mounted and removed and are
applicable for small control cables as well as the largest armored
cables. All bearing wheels turn independently with a minimum of
friction. The freely running wheels are smooth surfaced and
closely spaced to prevent cable damage.
Catalog Number
Tray Width
IR-1218
IR-1824
IR-2430
IR-3036
12 to 18" tray
18 to 24" tray
24 to 30" tray
30 to 36" tray
90 rollers are available in two sizes - 24" and 36" radius. Horizontal and vertical ball
bearing rollers assure easy pull and control on 90 turns at all points of contact. Cope 90
rollers can be top or inside mounted on any manufacturer's tray or ladder. Handles the
heaviest cable with ease.
Catalog Number
Tray Width
RR-1218
RR-1824
RR-2430
RR-3036
12 to 18" tray
18 to 24" tray
24 to 30" tray
30 to 36" tray
3-4 0
COPE LADDER
Suggested Fittings
COPELADDER
SYSTEM
NUMBER
MILL GALV.
FITTING
PREFIX
SYSTEM
NUMBER
HDGAF
FITTING
PREFIX
SYSTEM
NUMBER
FITTING
PREFIX
3-4 1
COPE Ladder
ALUMINUM
COPELADDER
By specifying the NEMA class designation, you will use the
simplest, clearest, and most complete method of specification
available and automatically incorporate support span in feet,
working (allowable) load in pounds per linear foot, a safety factor
of 1.5, a concentrated load if present; and, all other design,
manufacturing and test standards including electrical continuity.
All you need to do is add the desired load depth, rung spacing,
radius of fittings, metal and finish. You may add accessory
information pursuant to your project. Here is a typical specification for an outdoor tray system where the working (allowable)
load has been determined to be approximately 75 pounds per
foot on support spans of 12'.
Typical Specification
SPECIFICATION ALUMINUM COPE LADDER SYSTEM
Cable Ladder shall be manufactured by a company regularly
engaged in the manufacture of metal cable trays and shall be a
member of NEMA. Trays shall conform to NEMA Metal Cable Tray
Standard Publication VE-1 (latest issue).
1. Cable ladder shall be NEMA Classification 12B of the widths
indicated.
2. Material shall be aluminum alloy with side rails and rungs
of 6063.
3. Finish shall be natural.
4. Inside load depth to be NEMA Standard 3".
5. Fittings shall be 12" radius for control cables and 24" radius
for power cables. (This must be commensurate with the cable
manufacturers recommended minimum bending radius.)
6. All top level trays in stacks, and single runs to have raised
peaked, aluminum ventilated covers with heavy duty hold
down clamps every 3'-0".
7. Install expansion connectors, expansion guides, and hold
down clamps per NEMA Standard VE-1.
8. Where slopes or horizontal bends of trays are not at the
Standard NEMA angles, use adjustable connectors. If the
angle is too great for cable bending radius, use combinations of fitting and adjustable connectors.
9. Separate all cables of different volt ages in the same tray
using the manufacturer's standard barriers and barrier hold
down system.
10. The Cable Ladder system will be used as an equipment
grounding conductor.
11. To save space fittings shall have no tangents. To facilitate
field installation use one pair of universal type connector
plates for rigid joints.
12. Cable Ladder shall have outward facing side rails with
tubular rungs assembled into side rails by cold swaging.
Cable support surface on top of rungs to be flattened. Inside
of tray shall not have flanges or other projections. Full access
to the contents of the Cable Ladder shall be available.
13. Trays shall be Cope Cable Ladder System Number 3B38 as
manufactured by T. J. Cope, Inc.
3-4 2
COPE LADDER
COPEHAT
4
Economical Flange in Welded Cable
Ladder/Trough System for Electrical, Telephone,
Computer Control & Instrumentation Cable
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
COPEHAT
STRAIGHT LENGTH
Page 4-9
VERTICAL ELBOWS
Page 4-20 to 4-23
HORIZONTAL ELBOWS
Page 4-10 to 4-13
HORIZONTAL TEE
Page 4-14
VERTICAL TEE
Page 4-25
HORIZONTAL CROSS
Page 4-15
COVERS
Page 4-28
REDUCERS
Page 4-16 to 4-17
COVER ATTACHMENTS
Page 4-29
ADJUSTABLE ELBOWS
Page 4-18
CONNECTORS
Page 4-26
45 "Y" BRANCH
Page 4-19
4-2
COPE HAT
GENERAL &
TECHNICAL
INFORMATION
COPE HAT
FITTINGS
COVERS
CONNECTORS
ACCESSORIES
COPE Hat
COPEHAT
4-3
Selection Chart:
COPEHAT
COPE HAT-ALUMINUM
NEMA CLASS, PHYSICAL AND STRUCTURAL PROPERTIES
NEMA
Standard
VE-1
Load/Span
Class
8A-12A
12B
12C
16A
16B
20A
20B
Min X-Sect.
Area of 2
Rails per
NEC 318-7
(sq.in.)
Cope
System
Number
50 lb./ft.
523A
3"
(76mm)
312"
(89mm)
1316
0.800
0.700
0.60
12' span
1B4A
4"
(102mm)
414"
(108mm)
1316
0.898
0.911
0.60
12' span
Nominal
Load Depth
Side
Rail Height
1B5A
5"
(127mm)
514"
(133mm)
1316
1.142
1.436
0.60
3B6A
6"
(152mm)
614"
(159mm)
1316
1.614
2.360
1.00
3B4A
4"
(102mm)
414"
(108mm)
1316
1.148
1.158
0.60
1B5A
5"
(127mm)
514"
(133mm)
1316
1.142
1.436
0.60
3B6A
6"
(152mm)
614"
(159mm)
1316
1.614
2.360
0.60
100 lb./ft.
5B4A
4"
(102mm)
414"
(108mm)
1316
1.646
1.529
1.00
12' span
3B5A
5"
(127mm)
514"
(133mm)
1316
1.522
1.867
1.00
5B6A
6"
(152mm)
614"
(159mm)
1316
1.944
2.933
1.00
50 lb./ft.
5B4A
4"
(102mm)
414"
(108mm)
1316
1.646
1.529
1.00
16' span
745A
5"
(127mm)
514"
(133mm)
114
2.396
3.146
1.50
1D6A
6"
(152mm)
614"
(159mm)
114
2.378
3.601
1.00
3D4A
4"
(102mm)
414"
(108mm)
114
2.242
2.203
1.00
(133mm)
114
2.396
3.146
1.50
(159mm)
114
2.378
3.601
1.00
75 lb./ft.
745A
5"
(127mm)
514"
1D6A
6"
(152mm)
614"
100 lb./ft.
5D4A
4"
(102mm)
414"
(108mm)
114
2.782
2.869
1.50
16' span
3D5A
5"
(127mm)
514"
(133mm)
114
3.434
4.373
2.00
7D6A
6"
(152mm)
614"
(159mm)
114
4.186
6.012
2.00
50 lb./ft.
3D4A
4"
(102mm)
414"
(108mm)
114
2.242
2.203
1.00
20' span
745A
5"
(127mm)
514"
(133mm)
114
2.396
3.146
1.50
(159mm)
114
2.378
3.601
1.00
(133mm)
114
3.434
4.373
2.00
75 lb./ft.
20' span
20C
Moment
of
Inertia
Ix
(in.4)
Actual
NEMA
Load/Span
16' span
16C
Flange
Width
(in.)
Section
Modulus
of 2 Rails
Sx
(in.3)
1D6A
6"
(152mm)
614"
3D5A
5"
(127mm)
514"
(152mm)
614"
(159mm)
114
4.186
6.012
2.00
(133mm)
114
3.910
5.010
2.00
(159mm)
114
4.186
6.012
2.00
7D6A
6"
100 lb./ft.
5D5A
5"
(127mm)
514"
20' span
7D6A
6"
(152mm)
614"
EXTRA HEAVY DUTY - VERY LONG SPAN TRAYS - 4", 6" or 9" RUNG SPACING
Note:
9D6A
6"
(152mm)
614"
(159mm)
114
5.130
7.850
2.00
7G6A
6"
(152mm)
614"
(159mm)
5.804
8.728
2.00
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
4-4
COPE HAT
Selection Chart:
COPEHAT
COPE HAT-ALUMINUM
LOAD AND DEFLECTION DATA FOR ALUMINUM HAT
Working (Allowable) Load Capacity, Evenly Distributed-Tested per NEMA Standard VE-1,
Simple Beam - SAFETY FACTOR 1.5
6 Ft. Span
w
523A
207
1B4A
222
1B5A
3B6A
8 Ft. Span
k
10 Ft. Span
d
12 Ft. Span
.43
.002 117
.77
.007
75
1.20 .016
52
1.73 .033
.35
.002 125
.63
.005
80
.99
55
1.42 .026
324
.33
.001 182
1.26 .016
359
.22
3B4A
354
1B5A
3B6A
.012
16 Ft. Span
w
20 Ft. Span
w
.59
.003 117
.87
.007
77
191
.37
.002 115
.55
.005
75
.45
.001 191
.76
78
1.57 .020
324
.33
.001 182
.59
.003 117
.87
.007
77
1.26 .016
359
.22
191
.37
.002 115
.55
.005
75
.74
5B4A
362
.32
251
.69
3B5A
394
.31
222
.55
.002 142
.86
5B6A
480
.24
257
.40
.002 156
.60
.004 102
5B4A
251
.69
51
2.26 .044
25
2.75 .110
745A
349
.51
.001 223
79
1.85 .023
51
2.89 .057
78
1.61 .021
50
2.51 .050
.80
1D6A
74
.81
25 Ft. Span
w
.010
.010
.008
3D4A
342
.72
.002 219
82
2.74 .033
52
4.27 .082
745A
349
.51
.001 223
.80
79
1.85 .023
51
2.89 .057
1D6A
380
.49
.001 222
.69
78
1.61 .021
50
2.51 .050
5D4A
444
.71
.002 284 1.10 .004 188 1.53 .008 106 2.73 .026
65
4.07 .063
3D5A
525
.55
.001 336
.86
76
3.14 .041
404
.76
.002 281 1.09 .004 158 1.94 .012 101 3.02 .030
7D6A
24 Ft. Span
COPE Hat
Cope
Sys.
No.
3D4A
82 2.74 .033 52
4.27 .082
745A
79
1.85 .023
51
2.89 .057
1D6A
78
1.61 .021
50
2.51 .050
3D5A
2.0l .017
76
3.14 .041
7D6A
5D5A
7D6A
9D6A
7G6A
451 1.20 .003 253 2.14 .008 162 3.35 .020 112 4.79 .043 104 5.24 .050
68
3.23 .048
4-5
Selection Chart:
COPEHAT
COPE HAT-STEEL
NEMA CLASS, PHYSICAL AND STRUCTURAL PROPERTIES
NEMA
Standard
VE-1
Load/Span
Class
NEMA
Load/Span
8A-12A
50 lb./ft.
12' span
12B
12C
20C
0.444
824P
824G
824S
4"
(102mm)
(108mm)
1316
0.592
.629
.40
825P
825G
825S
5"
(127mm)
514"
(133mm)
1316
0.816
1.071
.40
826P
826G
826S
6"
(152mm)
614"
(159mm)
1316
1.072
1.676
.70
(89mm)
1316
0.674
.590
.70
(108mm)
1316
0.678
.685
.40
3"
(76mm)
4"
(102mm)
414"
50 lb./ft.
.40
1316
8B4S
100 lb./ft.
.389
(89mm)
423S
75 lb./ft.
Min X-Sect
Area of 2
Rails per
NEC 318-7
(sq.in.)
414"
8B4G
50 lb./ft.
Moment
of
Inertia
Ix
(in.4)
312"
423G
100 lb./ft.
Flange
Width
(in.)
Section
Modulus
of 2 Rails
Sx
(in.3)
(76mm)
423P
825P
825G
825S
5"
(127mm)
514"
(133mm)
1316
0.816
1.071
.40
826P
826G
826S
6"
(152mm)
614"
(159mm)
1316
1.072
1.676
.70
6B4P
6B4G
6B4S
4"
(102mm)
414"
(108mm)
1316
0.834
.845
.70
6B5P
6B5G
6B5S
5"
(127mm)
514"
(133mm)
1316
1.140
1.436
.70
626P
626G
626S
6"
(152mm)
614"
(159mm)
1316
1.330
2.079
.70
8D4P
8D4G
8D4S
4"
(102mm)
414"
(108mm)
114
0.852
.868
.40
645P
645G
645S
5"
(127mm)
514"
(133mm)
114
1.280
1.680
.70
646P
646G
646S
6"
(152mm)
614"
(159mm)
114
1.652
2.580
.70
6D4P
6D4G
6D4S
4"
(102mm)
414"
(108mm)
114
1.056
1.076
.70
645P
645G
645S
5"
(127mm)
514"
(133mm)
114
1.280
1.680
.70
646P
646G
646S
6"
(152mm)
614"
(159mm)
114
1.652
2.580
.70
4D4P
4D4G
4D4S
4"
(102mm)
414"
(108mm)
114
1.298
1.326
1.00
645P
645G
645S
5"
(127mm)
514"
(133mm)
114
1.280
1.680
.70
646P
646G
646S
6"
(152mm)
614"
(159mm)
114
1.652
2.580
.70
6D4P
6D4G
6D4S
4"
(102mm)
414"
(108mm)
114
1.056
1.076
.70
645P
645G
645S
5"
(127mm)
514"
(133mm)
114
1.280
1.680
.70
646P
646G
646S
6"
(152mm)
614"
(159mm)
114
1.652
2.580
1.00
75 lb./ft.
2D4P
2D4G
2D4S
4"
(102mm)
414"
(108mm)
114
1.758
1.802
1.00
20' span
4D5P
4D5G
4D56
5"
(127mm)
514"
(133mm)
114
1.744
2.209
1.00
(159mm)
114
1.814
2.743
1.00
(133mm)
114
2.370
3.013
1.50
2.240
3.389
1.00
20' span
20B
3"
8B4P
16' span
20A
823S
75 lb./ft.
16' span
16C
823G
Side
Rail
Height
12' span
16' span
16B
823P
Nominal
Load
Depth
312"
12' span
16A
Mill Galv
System
Number
Type 304
HDGAF
SS
System System
Number Number
100 lb./ft.
20' span
6D6P
6D6G
6D6S
6"
(152mm)
614"
2D5P
2D5G
2D5S
5"
(127mm)
514"
4D6S
558"
(143mm)
614"
(159mm)
114
(152mm)
614"
(159mm)
114
3.052
4.635
1.50
(152mm)
614"
(159mm)
114
3.536
5.315
1.50
4D6P
4D6G
EXTRA HEAVY DUTY - VERY LONG SPAN TRAYS - 4", 6" or 9" RUNG SPACING
2D6P
11D6P
Note:
2D6G
11D6G
2D6S
11D6S
6"
6"
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
4-6
COPE HAT
Selection Chart:
COPEHAT
COPE HAT-STEEL
LOAD AND DEFLECTION DATA FOR STEEL HAT
Working (Allowable) Load Capacity, Evenly Distributed-Tested per NEMA Standard VE-1,
Simple Beam - SAFETY FACTOR 1.5
Cope
System
Number
823P/G/S
230
.52 .004
79
.79 .010
53
1.11 .021
824P/G/S
292
.23
164
.63 .006
69
.89 .013
825P/G/S
383
.18
210
.46 .004
83
.62 .007
826P/G/S
357
.11
194
.18
119
.28 .002
79
.38 .005
423P/G/S
358
.30
197
.81 .007
83
1.13 .014
8B4P/G/S
360
.26
198
.70 .006
84
.98 .012
825P/G/S
383
.18
210
.46 .004
83
.62 .007
826P/G/S
357
.11
194
.18
.28 .002
79
.38 .005
6B4P/G/S
453
.27
249
6B5P/G/S
591
.21
325
.77 .006
626P/G/S
460
.11
250
.19
.40 .004
8D4P/G/S
290
645P/G/S
444
.42
273
646P/G/S
574
.42
367
6D4P/G/S
381
645P/G/S
444
.42
273
646P/G/S
574
.42
367
4D4P/G/S
487
645P/G/S
444
.42
273
646P/G/S
574
.42
367
8 Ft. Span
k
10 Ft. Span
k
119
154
12 Ft. Span
k
16 Ft. Span
k
20 Ft. Span
w
24 Ft. Span
k
25 Ft. Span
w
65
88
88
1.91 .029
2.08 .024
6D4P/G/S
2.08 .024
52
2.98 .057
645P/G/S
186
53
1.94 .037
646P/G/S
245
66
1.59 .024
2D4P/G/S
94
3.23 .034
4D5P/G/S
85
2.40 .028
6D6P/G/S
269
81
1.82 .022
2D5P/G/S
4D6P/G/S
296
2D6P/G/S
300
11D6P/G/S
434
.66
COPE Hat
6 Ft. Span
79
1.91 .024
73
2.38 .033
244 1.17 .005 156 1.82 .012 108 2.62 .024 100 2.85 .029
4-7
Ordering Information
COPEHAT
HOW TO ORDER:
Order by the Cope full catalog numbers given in this catalog. Please pay careful attention to the part numbering structure. Example:
Catalog No. 1B4A-06SL-12-09 is a 4-inch load depth aluminum ladder with a 1316" flange, 6 inches wide, straight length 12 feet long,
rungs on 9" centers.
STRAIGHT LENGTH
FITTINGS
System No.
Prefix No.
1 B 4 A- 0 6 S L - 1 2 - 0 9
Side Rail
Thickness
Rung
Spacing
Flange
Width
Load
Depth
Length (Feet)
Basic Part
Material
Finish
2 4 A- 0 6 9 F - 1 2
Flange
Width
Load
Depth
Material
Finish
Radius (Inches)
Basic Part
Width
Width
System Number
Thickness Steel (Ga.) Flange Width
*B - 1316" (21mm)
*D - 114" (32mm)
*G - 2" (51mm)
8 - 18 ga.
6 - 16 ga.
4 - 14 ga.
2 - 12 ga.
11 - 11 ga.
2 - 1316"
(21mm)
4 - 114" (32mm)
7 - 2"
(51mm)
Description
Load Depth
Material Finish
3" (76mm)
4" (102mm)
5" (127mm)
6" (152mm)
P - Mill-Galv.
G - HDGAF
A - Aluminum
S - 304SS
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide
Solid Rungs provided on trays 30" and 36" wide.
4-8
Width (in.)
-06=6" (152mm)
-09=9" (229mm)
-12=12" (305mm)
-18=18" (457mm)
-24=24" (610mm)
-30=30" (762mm)
-36=36" (914mm)
Rung Spacing
06=6" (152mm)
09=9" (229mm)
12=12" (305mm)
18=18" (457mm)
Radius (in.)
-12=12" (305mm)
-24=24" (610mm)
-36=36" (914mm)
COPE HAT
Cope Hat
COPEHAT
STRAIGHT LENGTH
Part No. SL
BOTTOM
FLANGE
RUNG
RUNG SPACING
SIDE RAIL
TOP FLANGE
(stiffened type shown)
SIDE RAIL
WEB
LENGTH
SIDE RAIL
HEIGHT
LOAD
DEPTH
Catalog Number
Basic
Length
Rung
System
Width
Number
(ft.)
Spacing
-06
SL
-10
-04
See
-09
-12
-06
Pages
-12
-20
-09
4-4 4-7
-18
-24
-12
-24
-18
-30
-36
Example: 1B4A-06SL-12-09 is a 4" load depth aluminum Hat rung
ladder with 1316" flange, 6" wide, 12' long, with 9" rung spacing.
WIDTH
CONVERSION TABLE
Cope Hat cable tray is manufactured in 10', 12', 20' and 24'
lengths; 6", 9", 12", 18", 24", 30" and 36" widths and 3", 4", 5",
and 6" nominal load depths. Sufficient connectors are supplied to
assemble straight sections and fittings for each order. Connectors
for field cuts must be ordered separately.
English
Metric (mm)
6" 9" 12" 18" 24" 30" 36" 12'-0" 24'-0" 10'-0" 20'-0"
152 229 305 457 610 762 914 3658 7316 3048 6096
COPE Hat
Siderails
Rungs
Splice Plate
Finish
Connector
Bolts
Bolt Plating
Covers
Pre-Galvanized Steel
ASTM A-653-G90 CQ (18 & 16 Gage)
ASTM A-653-G90 CQ (14 & 12 Gage)
ASTM A-653-G90 CQ
ASTM A-569
ASTM A-591 Class C
SAE J429 Grade 1
(ASTM A-307 Grade A)
ASTM B-633.0002" Zinc
ASTM A-653-G90 CQ
Aluminum
AA-6063-T6 Extruded
AA-6063-H34
AA-5052-H34
4-9
90 Horizontal Elbow
COPEHAT
PART NO. 9F
A
R
A
W
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
Catalog Number
A Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 069F-12
Prefix- 099F-12
Prefix- 129F-12
15"
1612"
18"
(381mm)
(419mm)
(457mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 189F-12
Prefix- 249F-12
Prefix- 309F-12
21"
24"
27"
(533mm)
(610mm)
(686mm)
36"
(914mm)
Prefix- 369F-12
30"
(762mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 069F-24
Prefix- 099F-24
Prefix- 129F-24
27"
2812"
30"
(686mm)
(724mm)
(762mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 189F-24
Prefix- 249F-24
Prefix- 309F-24
33"
36"
39"
(838mm)
(914mm)
(991mm)
36"
(914mm)
Prefix- 369F-24
42"
(1067mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 069F-36
Prefix- 099F-36
Prefix- 129F-36
39"
4012"
42"
(991mm)
(1029mm)
(1067mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 189F-36
Prefix- 249F-36
Prefix- 309F-36
45"
48"
51"
(1143mm)
(1219mm)
(1295mm)
36"
(914mm)
Prefix- 369F-36
54"
(1372mm)
Example: 24A-129F-12
4-1 0
COPE HAT
60 Horizontal Elbow
COPEHAT
PART NO. 6F
60
R
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
Catalog Number
A Dimension
B Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 066F-12
Prefix- 096F-12
Prefix- 126F-12
13"
1414"
1558"
(330mm)
(362mm)
(397mm)
712"
814"
9"
(191mm)
(210mm)
(229mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 186F-12
Prefix- 246F-12
Prefix- 306F-12
1814"
2034"
2338"
(464mm)
(527mm)
(594mm)
1012"
12"
1312"
(267mm)
(305mm)
(343mm)
36"
(914mm)
Prefix- 366F-12
26"
(660mm)
15"
(381mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
2338"
2434"
26"
(594mm)
(629mm)
(660mm)
1312"
1414"
15"
(343mm)
(362mm)
(381mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 186F-24
Prefix- 246F-24
Prefix- 306F-24
2858"
3114"
3334"
(727mm)
(794mm)
(857mm)
1612"
18"
1912"
(416mm)
(457mm)
(495mm)
36"
(914mm)
3638"
(924mm)
21"
(533mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 066F-36
Prefix- 096F-36
Prefix- 126F-36
3334"
3518"
3638"
(857mm)
(892mm)
(924mm)
1912"
2014"
21"
(495mm)
(514mm)
(533mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 186F-36
Prefix- 246F-36
Prefix- 306F-36
39"
4158"
4418"
(991mm)
(1057mm)
(1121mm)
2212"
24"
2512"
(572mm)
(610mm)
(648mm)
36"
(914mm)
Prefix- 366F-36
4634"
(1187mm)
27"
(686mm)
COPE Hat
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
Example: 24A-126F-12
4-1 1
45 Horizontal Elbow
COPEHAT
PART NO. 4F
45
A
R
W
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
Catalog Number
A Dimension
B Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 064F-12
Prefix- 094F-12
Prefix- 124F-12
1058"
1158"
1234"
(270mm)
(295mm)
(324mm)
438"
478"
514"
(111mm)
(124mm)
(133mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 184F-12
Prefix- 244F-12
Prefix- 304F-12
1478"
17"
1918"
(378mm)
(432mm)
(486mm)
618"
7"
778"
(156mm)
(178mm)
(200mm)
36"
(914mm)
Prefix- 364F-12
2114"
(540mm)
834"
(222mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 064F-24
Prefix- 094F-24
Prefix- 124F-24
1918"
2018"
2114"
(486mm)
(511mm)
(540mm)
778"
838"
834"
(200mm)
(213mm)
(222mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 184F-24
Prefix- 244F-24
Prefix- 304F-24
2338"
2512"
2758"
(594mm)
(648mm)
(702mm)
958"
1012"
1112"
(244mm)
(267mm)
(292mm)
36"
(914mm)
Prefix- 364F-24
2934"
(756mm)
1238"
(314mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 064F-36
Prefix- 094F-36
Prefix- 124F-36
2758"
2858"
2934"
(702mm)
(727mm)
(756mm)
1112"
11 78"
1238"
(292mm)
(302mm)
(314mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 184F-36
Prefix- 244F-36
Prefix- 304F-36
3178"
34"
3618"
(810mm)
(864mm)
(918mm)
1314"
1418"
15"
(337mm)
(359mm)
(381mm)
36"
(914mm)
Prefix- 364F-36
3814"
(972mm)
1578"
(403mm)
Example: 24A-124F-12
4-1 2
COPE HAT
30 Horizontal Elbow
COPEHAT
PART NO. 3F
30
A
R
W
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
Catalog Number
A Dimension
B Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 063F-12
Prefix- 093F-12
Prefix- 123F-12
712"
814"
9"
(191mm)
(210mm)
(229mm)
2"
214"
238"
(51mm)
(57mm)
(60mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 183F-12
Prefix- 243F-12
Prefix- 303F-12
1012"
12"
1312"
(267mm)
(305mm)
(343mm)
278"
314"
358"
(73mm)
(83mm)
(92mm)
36"
(914mm)
Prefix- 363F-12
15"
(381mm)
4"
(102mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 063F-24
Prefix- 093F-24
Prefix- 123F-24
1312"
1414"
15"
(343mm)
(362mm)
(381mm)
358"
378"
4"
(92mm)
(98mm)
(102mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 183F-24
Prefix- 243F-24
Prefix- 303F-24
1612"
18"
1912"
(419mm)
(457mm)
(495mm)
438"
478"
514"
(111mm)
(124mm)
(133mm)
36"
(914mm)
Prefix- 363F-24
21"
(533mm)
558"
(143mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 063F-36
Prefix- 093F-36
Prefix- 123F-36
1912"
2014"
21"
(495mm)
(514mm)
(533mm)
514"
512"
558"
(133mm)
(140mm)
(143mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 183F-36
Prefix- 243F-36
Prefix- 303F-36
2212"
24"
2512"
(572mm)
(610mm)
(648mm)
6"
612"
678"
(152mm)
(165mm)
(175mm)
36"
(914mm)
Prefix- 363F-36
27"
(686mm)
714"
(184mm)
COPE Hat
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
Example: 24A-123F-12
4-1 3
Horizontal Tee
COPEHAT
PART NO. FT
B
A
W
7 8 "
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
SQUARE RUNG
Width - W
Catalog Number
A Dimension
B Dimension
.40
.60
1.00
.70
1.00
1.00 1.00
.70
1.00
1.00 1.00
.70
1.00
C Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 06FT-12
Prefix- 09FT-12
Prefix- 12FT-12
15"
1612"
18"
(381mm)
(419mm)
(457mm)
30"
33"
36"
(762mm)
(838mm)
(914mm)
18"
21"
24"
(457mm)
(533mm)
(610mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18FT-12
Prefix- 24FT-12
Prefix- 30FT-12
21"
24"
27"
(533mm)
(610mm)
(686mm)
42"
48"
54"
(1067mm)
(1219mm)
(1372mm)
30"
36"
42"
(762mm)
(914mm)
(1067mm)
36"
(914mm)
Prefix- 36FT-12
30"
(762mm)
60"
(1524mm)
48"
(1219mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 06FT-24
Prefix- 09FT-24
Prefix- 12FT-24
27"
2812"
30"
(686mm)
(724mm)
(762mm)
54"
57"
60"
(1372mm)
(1448mm)
(1524mm)
30"
33"
36"
(762mm)
(838mm)
(914mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18FT-24
Prefix- 24FT-24
Prefix- 30FT-24
33"
36"
39"
(838mm)
(914mm)
(991mm)
66"
72"
78"
(1676mm)
(1829mm)
(1981mm)
42"
48"
54"
(1067mm)
(1219mm)
(1372mm)
36"
(914mm)
Prefix- 36FT-24
42"
(1067mm)
84"
(2134mm)
60"
(1524mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 06FT-36
Prefix- 09FT-36
Prefix- 12FT-36
39"
4012"
42"
(991mm)
(1029mm)
(1067mm)
78"
81"
84"
(1981mm)
(2057mm)
(2134mm)
42"
45"
48"
(1067mm)
(1143mm)
(1219mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18FT-36
Prefix- 24FT-36
Prefix- 30FT-36
45"
48"
51"
(1143mm)
(1219mm)
(1295mm)
90"
96"
102"
(2286mm)
(2438mm)
(2591mm)
54"
60"
66"
(1372mm)
(1524mm)
(1676mm)
36"
(914mm)
Prefix- 36FT-36
54"
(1372mm)
108"
(2743mm)
72"
(1829mm)
Example: 24A-12FT-12
4-1 4
COPE HAT
Horizontal Cross
COPEHAT
PART NO. FC
A
B
A
R
W
SQUARE RUNG
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
.40
.60
1.00
.70
1.00
1.00 1.00
.70
1.00
1.00 1.00
.70
1.00
Catalog Number
A Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 06 FC-12
Prefix- 09 FC-12
Prefix- 12 FC-12
15"
1612"
18"
(381mm)
(419mm)
(457mm)
30"
33"
36"
B Dimension
(762mm)
(838mm)
(914mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18 FC-12
Prefix- 24 FC-12
Prefix- 30 FC-12
21"
24"
27"
(533mm)
(610mm)
(686mm)
42"
48"
54"
(1067mm)
(1219mm)
(1372mm)
36"
(914mm)
Prefix- 36 FC-12
30"
(762mm)
60"
(1524mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 06 FC-24
Prefix- 09 FC-24
Prefix- 12 FC-24
27"
2812"
30"
(686mm)
(724mm)
(762mm)
54"
57"
60"
(1372mm)
(1448mm)
(1524mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18 FC-24
Prefix- 24 FC-24
Prefix- 30 FC-24
33"
36"
39"
(838mm)
(914mm)
(991mm)
66"
72"
78"
(1676mm)
(1829mm)
(1981mm)
36"
(914mm)
Prefix- 36 FC-24
42"
(1067mm)
84"
(2134mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 06 FC-36
Prefix- 09 FC-36
Prefix- 12 FC-36
39"
4012"
42"
(991mm)
(1029mm)
(1067mm)
78"
81"
84"
(1981mm)
(2057mm)
(2134mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18 FC-36
Prefix- 24 FC-36
Prefix- 30 FC-36
45"
48"
51"
(1143mm)
(1219mm)
(1295mm)
90"
96"
102"
(2286mm)
(2438mm)
(2591mm)
36"
(914mm)
Prefix- 36 FC-36
54"
(1372mm)
108"
(2743mm)
COPE Hat
7 8 "
Example: 24A-12FC-12
4-1 5
Straight Reducer
COPEHAT
PART NO. ST
A
W1
12
W
Straight (ST)
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
Width - W
36"
(914mm)
Width - W1
30"
(762mm)
24"
(610mm)
18"
(457mm)
12"
(305mm)
9"
(229mm)
6"
(152mm)
Catalog No.Straight
Prefix-36ST-30
Prefix-36ST-24
Prefix-36ST-18
Prefix-36ST-12
Prefix-36ST-09
Prefix-36ST-06
A Dimension
3"
(76mm)
6"
(152mm)
9"
(229mm)
12"
(305mm)
1312" (343mm)
15"
(381mm)
24"
18"
12"
9"
6"
(610mm)
(457mm)
(305mm)
(229mm)
(152mm)
Prefix-30ST-24
Prefix-30ST-18
Prefix-30ST-12
Prefix-30ST-09
Prefix-30ST-06
3"
6"
9"
1012"
12"
(76mm)
(152mm)
(229mm)
(267mm)
(304mm)
18"
12"
9"
6"
(457mm)
(305mm)
(229mm)
(152mm)
Prefix-24ST-18
Prefix-24ST-12
Prefix-24ST-09
Prefix-24ST-06
3"
6"
712"
9"
(76mm)
(152mm)
(191mm)
(229mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
Prefix-18ST-12
Prefix-18ST-09
Prefix-18ST-06
3"
412"
6"
(76mm)
(114mm)
(152mm)
12"
(305mm)
9"
6"
(229mm)
(152mm)
Prefix-12ST-09
Prefix-12ST-06
112"
3"
(38mm)
(76mm)
9"
6"
(152mm)
Prefix-09ST-06
112"
(38mm)
30"
(762mm)
24"
(610mm)
18"
(457mm)
(229mm)
Example: 24A-12ST-06
4-1 6
COPE HAT
COPEHAT
PART NO. LH (LEFT HAND)
W1
W1
12
12
B
W
Left Hand (LH)
B
W
Right Hand (RH)
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
A Dimension
6"
(152mm)
12"
(305mm)
18"
(457mm)
24"
(610mm)
27"
(686mm)
30"
(762mm)
Prefix-30LH-24
Prefix-30LH-18
Prefix-30LH-12
Prefix-30LH-09
Prefix-30LH-06
Prefix-30RH-24
Prefix-30RH-18
Prefix-30RH-12
Prefix-30RH-09
Prefix-30RH-06
6"
12"
18"
21"
24"
(152mm)
(305mm)
(457mm)
(533mm)
(610mm)
12"
9"
6"
412"
3"
(305mm)
(229mm)
(152mm)
(114mm)
(76mm)
24"
18"
12"
9"
6"
(610mm)
(457mm)
(305mm)
(229mm)
(152mm)
Prefix-24LH-18
Prefix-24LH-12
Prefix-24LH-09
Prefix-24LH-06
Prefix-24RH-18
Prefix-24RH-12
Prefix-24RH-09
Prefix-24RH-06
6"
12"
15"
18"
(152mm)
(305mm)
(381mm)
(457mm)
9"
6"
412"
3"
(229mm)
(152mm)
(114mm)
(76mm)
18"
12"
9"
6"
(457mm)
(305mm)
(229mm)
(152mm)
18"
Prefix-18LH-12
Prefix-18LH-09
Prefix-18LH-06
Prefix-18RH-12
Prefix-18RH-09
Prefix-18RH-06
6"
9"
12"
(152mm)
(229mm)
(305mm)
6"
412"
3"
(152mm)
(114mm)
(76mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
12"
(305mm)
Prefix-12LH-09
Prefix-12LH-06
Prefix-12RH-09
Prefix-12RH-06
3"
6"
(76mm)
(152mm)
412"
3"
(114mm)
(76mm)
9"
6"
(229mm)
(152mm)
9"
Prefix-09LH-06
Prefix-09RH-06
3"
(76mm)
(76mm)
6"
(152mm)
36"
(914mm)
30"
(762mm)
24"
(610mm)
(457mm)
B Dimension
15" (381mm)
12" (305mm)
9"
(229mm)
6"
(152mm)
412" (114mm)
3"
(76mm)
3"
W1 Dimension
30" (914mm)
24" (610mm)
18" (457mm)
12" (305mm)
9" (229mm)
6" (152mm)
COPE Hat
Width - W
(229mm)
Example: 24A-12LH-06
4-1 7
Adjustable Elbow
COPEHAT
PART NO. AF
A
W
6"
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
Catalog
Width - W
A Dimension
Prefix- 06AF
Prefix- 09AF
6"
9"
(152mm)
(229mm)
8"
11"
(203mm)
(279mm)
Prefix- 12AF
Prefix- 18AF
12"
18"
(305mm)
(457mm)
14"
20"
(356mm)
(508mm)
Prefix- 24AF
Prefix- 30AF
24"
30"
(610mm)
(762mm)
26"
32"
(660mm)
(813mm)
Prefix- 36AF
36"
(914mm)
38"
(965mm)
Both rails at hinge break to be bonded if fitting is used as equipment grounding conductor.
Example: 24A-12AF
4-1 8
COPE HAT
45 Y Branch
COPEHAT
PART NO. LY AND RY
(RY Shown)
A
C
8"
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Width - W
A Dimension
B Dimension
C Dimension
D Dimension
(152mm)
(229mm)
2212"
2138"
(413mm)
(543mm)
1138"
2634"
(571mm)
(679mm)
1614"
Prefix- 06LY
Prefix- 09LY
Prefix- 06RY
Prefix- 09RY
6"
9"
13"
(289mm)
(330mm)
1118"
1334"
(283mm)
(349mm)
Prefix- 12LY
Prefix- 18LY
Prefix- 12RY
Prefix- 18RY
12"
18"
(305mm)
(457mm)
31"
3912"
(787mm)
(1003mm)
2612"
3634"
(673mm)
(933mm)
1434"
1818"
(375mm)
(460mm)
1614"
2138"
(412mm)
(543mm)
Prefix- 24LY
Prefix- 30LY
Prefix- 24RY
Prefix- 30RY
24"
30"
(610mm)
(762mm)
48"
5638"
(1219mm)
(1432mm)
47"
(1193mm)
5714" (1454mm)
2112"
2434"
(546mm)
(629mm)
2612"
3158"
(673mm)
(803mm)
Prefix- 36LY
Prefix- 36RY
36"
(914mm)
65"
(1651mm)
6712" (1714mm)
2814"
(718mm)
3634"
(933mm)
Example: 24A-12RY
4-1 9
COPE Hat
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
90 Vertical Elbow
COPEHAT
PART NO. 9O (OUTSIDE)
A
A
90
R
H
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
312"
414"
Height - H
(89mm)
(108mm)
Prefix- (W)9I-12
Prefix- (W)9I-12
Prefix- (W)9O-12
Prefix- (W)9O-12
1334"
1418"
A Dim.
(349mm)
(359mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)9I-12
Prefix- (W)9I-12
Prefix- (W)9O-12
Prefix- (W)9O-12
1458"
1518"
(372mm)
(384mm)
312"
414"
(89mm)
(108mm)
Prefix- (W)9I-24
Prefix- (W)9I-24
Prefix- (W)9O-24
Prefix- (W)9O-24
2534"
2618"
(654mm)
(664mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)9I-24
Prefix- (W)9I-24
Prefix- (W)9O-24
Prefix- (W)9O-24
2658"
2718"
(676mm)
(689mm)
312"
414"
(89mm)
(108mm)
Prefix- (W)9I-36
Prefix- (W)9I-36
Prefix- (W)9O-36
Prefix- (W)9O-36
3734"
3818"
(959mm)
(969mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)9I-36
Prefix- (W)9I-36
Prefix- (W)9O-36
Prefix- (W)9O-36
3858"
3918"
(981mm)
(994mm)
Example: 24A-129O-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
4-2 0
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
COPE HAT
60 Vertical Elbow
COPEHAT
PART NO. 6O (OUTSIDE)
60
C
R
H
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Radius - R
A Dimension
B Dimension
12"
312"
414"
(89mm)
(108mm)
Prefix- (W)6I-12
Prefix- (W)6I-12
Prefix- (W)6O-12
Prefix- (W)6O-12
1178"
1214"
(302mm)
(311mm)
678"
718"
(175mm)
(181mm)
1334"
1418"
(349mm)
(359mm)
(305mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)6I-12
Prefix- (W)6I-12
Prefix- (W)6O-12
Prefix- (W)6O-12
1258"
1318"
(321mm)
(334mm)
738"
758"
(187mm)
(194mm)
1458"
1518"
(372mm)
(384mm)
24"
312"
414"
(89mm)
(108mm)
Prefix- (W)6I-24
Prefix- (W)6I-24
Prefix- (W)6O-24
Prefix- (W)6O-24
2214"
2258"
(565mm)
(575mm)
1278"
1318"
(327mm)
(334mm)
2534"
2618"
(654mm)
(664mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)6I-24
Prefix- (W)6I-24
Prefix- (W)6O-24
Prefix- (W)6O-24
2318"
2312"
(588mm)
(597mm)
1338"
13"
(340mm)
(330mm)
2658"
2718"
(676mm)
(689mm)
312"
414"
(89mm)
(108mm)
Prefix- (W)6I-36
Prefix- (W)6I-36
Prefix- (W)6O-36
Prefix- (W)6O-36
3234"
33"
(832mm)
(838mm)
1878"
1918"
(480mm)
(486mm)
3734"
3818"
(959mm)
(969mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)6I-36
Prefix- (W)6I-36
Prefix- (W)6O-36
Prefix- (W)6O-36
3312"
3378"
(851mm)
(861mm)
1938"
1958"
(492mm)
(499mm)
3858"
3918"
(981mm)
(994mm)
(610mm)
36"
(914mm)
Height - H
C Dimension
Example: 24A-126O-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
4-2 1
COPE Hat
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
45 Vertical Elbow
COPEHAT
PART NO. 4O (OUTSIDE)
45
C
R
H
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Height - H
A Dimension
B Dimension
C Dimension
4"
418"
(102mm)
(105mm)
1334"
1418"
(349mm)
(359mm)
414"
(89mm)
(108mm)
Prefix- (W)4I-12
Prefix- (W)4I-12
Prefix- (W)4O-12
Prefix- (W)4O-12
934"
10"
(248mm)
(254mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)4I-12
Prefix- (W)4I-12
Prefix- (W)4O-12
Prefix- (W)4O-12
1038"
1034"
(264mm)
(273mm)
414"
412"
(108mm)
(114mm)
1458"
1518"
(372mm)
(384mm)
414"
514"
(108mm)
(133mm)
Prefix- (W)4I-24
Prefix- (W)4I-24
Prefix- (W)4O-24
Prefix- (W)4O-24
1812"
1878"
(470mm)
(480mm)
758"
778"
(194mm)
(200mm)
2618"
2658"
(664mm)
(676mm)
614"
312"
(159mm)
(89mm)
Prefix- (W)4I-24
Prefix- (W)4I-24
Prefix- (W)4O-24
Prefix- (W)4O-24
1914"
1814"
(489mm)
(464mm)
8"
712"
(203mm)
(191mm)
2718"
2534"
(689mm)
(654mm)
312"
414"
(89mm)
(108mm)
Prefix- (W)4I-36
Prefix- (W)4I-36
Prefix- (W)4O-36
Prefix- (W)4O-36
2634"
27"
(679mm)
(686mm)
1118" (283mm)
1118" (283mm)
3734"
3818"
(959mm)
(969mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)4I-36
Prefix- (W)4I-36
Prefix- (W)4O-36
Prefix- (W)4O-36
2738"
2758"
(695mm)
(702mm)
1138" (289mm)
1112" (292mm)
3858"
3918"
(981mm)
(994mm)
312"
Example: 24A-124O-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
4-2 2
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
COPE HAT
30 Vertical Elbow
COPEHAT
PART NO. 3O (OUTSIDE)
B
30
A
C
R
H
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Height - H
A Dimension
B Dimension
C Dimension
Prefix- (W)3I-12
Prefix- (W)3I-12
Prefix- (W)3O-12
Prefix- (W)3O-12
718"
(175mm)
(181mm)
178"
414"
(89mm)
(108mm)
678"
178"
(48mm)
(48mm)
1334"
1418"
(349mm)
(359mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)3I-12
Prefix- (W)3I-12
Prefix- (W)3O-12
Prefix- (W)3O-12
738"
758"
(187mm)
(194mm)
2"
2"
(51mm)
(51mm)
1458"
1518"
(372mm)
(384mm)
312"
414"
(89mm)
(108mm)
Prefix- (W)3I-24
Prefix- (W)3I-24
Prefix- (W)3O-24
Prefix- (W)3O-24
1278"
1318"
(327mm)
(334mm)
312"
312"
(89mm)
(89mm)
2534"
2618"
(654mm)
(664mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)3I-24
Prefix- (W)3I-24
Prefix- (W)3O-24
Prefix- (W)3O-24
1338"
1358"
(340mm)
(346mm)
358"
358"
(92mm)
(92mm)
2658"
2718"
(676mm)
(689mm)
312"
414"
(89mm)
(108mm)
Prefix- (W)3I-36
Prefix- (W)3I-36
Prefix- (W)3O-36
Prefix- (W)3O-36
1878"
1918"
(480mm)
(486mm)
518"
518"
(130mm)
(130mm)
3734"
3818"
(959mm)
(969mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)3I-36
Prefix- (W)3I-36
Prefix- (W)3O-36
Prefix- (W)3O-36
1938"
1958"
(492mm)
(499mm)
514"
514"
(133mm)
(133mm)
3858"
3918"
(981mm)
(994mm)
312"
Example: 24A-123O-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
4-2 3
COPE Hat
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
COPEHAT
PART NO. SR
H
A
R
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
A Dimension
B Dimension
312"
414"
Height - H
(89mm)
(108mm)
Prefix- (W)SR-12
Prefix- (W)SR-12
1512"
1614"
(394mm)
(413mm)
1334"
1418"
(349mm)
(359mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)SR-12
Prefix- (W)SR-12
1714"
1814"
(438mm)
(464mm)
1458"
1518"
(371mm)
(384mm)
312"
414"
(89mm)
(108mm)
Prefix- (W)SR-24
Prefix- (W)SR-24
2712"
2814"
(699mm)
(718mm)
2534"
2618"
(654mm)
(664mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)SR-24
Prefix- (W)SR-24
2914"
3014"
(743mm)
(768mm)
2658"
2718"
(676mm)
(689mm)
312"
414"
(89mm)
(108mm)
Prefix- (W)SR-36
Prefix- (W)SR-36
3912"
4014"
(1003mm)
(1022mm)
3734"
3818"
(959mm)
(968mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)SR-36
Prefix- (W)SR-36
4114"
4214"
(1048mm)
(1073mm)
3858"
3918"
(981mm)
(994mm)
Example: 24A-12SR-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
4-2 4
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
COPE HAT
Vertical Tee
COPEHAT
PART NO. VT
A
H
B
C
R
.40
.60
1.00
.70
1.00
1.00
1.00
.70
1.00
1.00
1.00
.70
1.00
Radius - R
Height - H
A Dimension
B Dimension
C Dimension
Prefix- (W)VT-12
Prefix- (W)VT-12
2814"
(699mm)
(718mm)
1512"
414"
(89mm)
(108mm)
2712"
1614"
(394mm)
(413mm)
1334"
1418"
(349mm)
(359mm)
(305mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)VT-12
Prefix- (W)VT-12
2914"
3014"
(743mm)
(768mm)
1714"
1814"
(438mm)
(464mm)
1458"
1518"
(371mm)
(384mm)
24"
312"
414"
(89mm)
(108mm)
Prefix- (W)VT-24
Prefix- (W)VT-24
5112"
5214"
(1308mm)
(1327mm)
2712"
2814"
(699mm)
(718mm)
2534"
2618"
(654mm)
(664mm)
(610mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)VT-24
Prefix- (W)VT-24
5314"
5414"
(1353mm)
(1378mm)
2914"
3014"
(743mm)
(768mm)
2658"
2718"
(676mm)
(689mm)
312"
414"
(89mm)
(108mm)
Prefix- (W)VT-36
Prefix- (W)VT-36
7512"
7614"
(1918mm)
(1937mm)
3912" (1003mm)
4014" (1022mm)
3734"
3818"
(959mm)
(968mm)
514"
614"
(133mm)
(159mm)
Prefix- (W)VT-36
Prefix- (W)VT-36
7714"
7814"
(1962mm)
(1988mm)
4114" (1048mm)
4214" (1073mm)
3858"
3918"
(981mm)
(994mm)
12"
36"
(914mm)
312"
COPE Hat
Slotted Rungs provided on trays 6", 9", 12", 18" and 24" wide.
Solid Rungs provided on trays 30" and 36" wide.
Example: 24A-12VT-12
(W) = Width in inches, Use:
06 for 6" w
09 for 9" w
12 for 12" w
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
4-2 5
Connector Plates
COPEHAT
TRAY CONNECTORS
Catalog Number & Finishes
EXPANSION CONNECTOR
Part No. CE (Sold in pairs)
Catalog Number
Load Depth
3
4
5
6
Finish
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304SS)
Basic Number
-02RC
-02CE
-02CV
-02CH
-02CA
D
6"
6"
90 ANGLE CONNECTOR
Part No. CA (Sold in pairs)
734"
3"
REDUCING CONNECTOR
Part No. CO (Not sold in pairs)
Catalog Number
Load Depth
3"
4"
5"
6"
L.H. OFFSET
REDUCTION
STRAIGHT
REDUCTION
4-2 6
3"
R.H. OFFSET
REDUCTION
Finish
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304SS)
Basic Number
-30CO
-27CO
-24CO
-21CO
-18CO
-15CO
-13CO
-12CO
-10CO
-09CO
-07CO
-06CO
-04CO
-03CO
-01CO
A Dimension
30" (762mm)
27" (686mm)
24" (610mm)
21" (533mm)
18" (457mm)
15" (381mm)
1312" (343mm)
12" (305mm)
1012" (267mm)
9"
(229mm)
712" (191mm)
6"
(152mm)
412" (114mm)
3"
(76mm)
112" (38mm)
Example:
COPE HAT
Hardware
COPEHAT
MATERIAL/FINISH
Electrogalvanized finish standard. Other finishes available; consult factory. *Use following
suffix when applicable - use only where indicated.
No Suffix ..... Electrogalvanized carbon steel only
-HG ............. Hot-dip Galvanized (Except Threaded Rod)
-SS .............. 302/304 Stainless Steel
-S1 .............. 316 Stainless Steel (check factory for availability)
Example: 5112-2-HG, 38 x 112 hex head bolt, hot-dip galvanized
CONNECTOR HARDWARE
(Case-hardened steel electrogalvanized)
Cat. No.
5002-0-*
5002-1-*
5002-2-*
5002-3-*
5002-4-*
Size
14"
38"
12"
58"
34"
Cat. No.
5006-0-*
5006-1-*
5006-2-*
5006-3-*
5006-4-*
Size
14"
38"
12"
58"
34"
Cat. No.
5007-0-*
5007-1-*
5007-2-*
5007-3-*
5007-4-*
Size
14"
38"
12"
58"
34"
FLAT WASHERS
washer face.
SPLIT-LOCK WASHERS
COVER SCREW
Part No. EM-CC (electrogalv. steel)
Part No. EM-CC-SS (stainless steel)
No. 10 x 58" long, self drilling-self tapping
hex head plated steel screw.
Suggested spacing:
Indoor: 8 per 12';
Outdoor: 10 per 12'
FENDER WASHERS
Cat. No.
5010-0-*
5010-1-*
5010-2-*
Size
14"
38"
12"
58"
34"
Cat. No.
5001-0-*
5001-1-*
5001-2-*
5001-3-*
5001-4-*
Size
14"
38"
12"
58"
34"
ROD COUPLER
Cat. No.
8195-0-*
8195-1-*
8195-2-*
8195-3-*
8195-4-*
COPE Hat
SQUARE NUTS
Catalog No.
5100-0
HEX NUTS
Catalog No.
6100-0
Hex Head
Cap Screw
Cat. No.
5100-0-*
5112-0-*
5100-1-*
5112-1-*
5200-1-*
5100-2-*
5112-2-*
5200-2-*
5212-2-*
5300-2-*
5312-2-*
5112-3-*
5200-3-*
5300-3-*
5400-3-*
5200-4-*
5300-4-*
5400-4-*
Round Head
Cap Screw
Cat. No.
6100-0-*
6112-0-*
6100-1-*
6112-1-*
6200-1-*
6100-2-*
6112-2-*
6200-2-*
6212-2-*
6300-2-*
6312-2-*
6112-3-*
6200-3-*
6300-3-*
6400-3-*
6200-4-*
6300-4-*
6400-4-*
Size
(Dia. x Len.)
14" x 1"
14" x 112"
38" x 1"
38" x 112"
38" x 3"
12" x 1"
12" x 112"
12" x 2"
12" x 212"
12" x 3"
12" x 312"
58" x 112"
58" x 2"
58" x 3"
58" x 4"
34" x 2"
34" x 3"
34" x 4"
NOTE: Standard finish is electrogalvanized. Refer to finishes above for specifications of alternate finish or material.
4-2 7
Covers
COPEHAT
COVERS for straight sections shown. Standard fitting covers are flat solid type (NF). Aluminum covers are fabricated from 0.040"
aluminum AA-3150-H14; steel covers are fabricated from 20 gage ASTM A-653-G90 CQ, mill-galvanized steel.
FS Flat Solid
w/Flange
NF Flat Solid
PS Peaked Solid
(suffix height)
NL Flat Louvered
FL Louvered
w/Flange
HS Hat (Solid)
HV Hat (Vent)
(suffix height)
Finish
HS, HV,
FL, FS,
NF, NL,
PS, PF,
PH, PV
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
-06SL = 6"
-09SL = 9"
-12SL = 12"
-18SL = 18"
-24SL = 24"
-30SL = 30"
-36SL = 36"
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
Length
Height*
-12'
-06'
-2*
*Peak and hat only, 2" height standard. Consult factory for other heights.
Example: NL2-09SL-12 is a flat louvered mill-galv. steel cover for a 9" wide mill galvanized hat 12' long.
Load Depth
NF
FS
3
4
5
6
Finish
Radius
-06 XX**
12"
-09 XX**
24"
-12 XX**
36"
-18 XX**
-24 XX**
-30 XX**
-36 XX**
*Load depth for outside riser or vertical tee only.
**XX from fitting selection pages
Example: NF2-369F-24 is a mill galvanized non-flanged solid cover for a 36 in. wide horizontal 90 elbow
with a 24 in. radius.
4-2 8
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
Width/Basic No.
JOINT PLATE
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
Flange Type
-2 = 1316" Flange
-4 = 114" Flange
-7 = 2" Flange
COPE HAT
Cover Accessories
COPEHAT
SINGLE SIDE CONNECTOR
Part No. 01CC
Catalog Number
Flange
Load Depth
2 - 1316"
3
4
5
6
4 - 114"
7 - 2"
Type
-06
-09
-12
-18
-24
-30
-36
DC
Catalog Number
For all covers except hat &
peak type. Furnished with:
(2) 14"-20 all-thread rods
(4) hex nuts, flat washers
and lock washers
Suggested spacing:
Indoor: 2 per 12'
Outdoor: 3 per 12'
High Wind: 5 per 12'
3
4
5
6
Finish
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
Width
Type
3
4
5
6
Finish
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
Width
Type
-06
-09
-12
-18
-24
-30
-36
CC
Example: 34-12CC for 3" load depth, aluminum, 12" wide connector.
Raise (in)*
-06
PC
-2
-09
VC
-12
-18
-24
-30
-36
*2" standard raise. Consult factory for other peak heights.
Example: 34-12VC-2 for 3" load depth, aluminum, 12" wide, Peak Cover Connector
(vented cover) with 2" peak.
Load Depth
Catalog Number
Load Depth
-01CC
COPE Hat
Width
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
COVER CONNECTOR
Part No. CC (For all covers except hat & peak type)
Catalog Number
3
4
5
6
Basic No.
Example: 234-01CC for 3" load depth, aluminum single side connector.
Finish
Catalog Number
Flange
Finish
2 - 1316"
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
4 - 114"
7 - 2"
Type
Height*
EC
- Raise* (in.)
4-2 9
Accessories
COPEHAT
DROP OUT
Part No. DO
Cover
#10 x 58"
Self Drilling
Screw
Raise
Catalog Number
Basic Finish
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304SS)
Width
-06DO = 6" (152mm)
-09DO = 9" (229mm)
-12DO = 12" (305mm)
-18DO = 18" (457mm)
-24DO = 24" (610mm)
-30DO = 30" (762mm)
36DO = 36" (914mm)
Tray Channel
Catalog Number
Finish
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
Type
EM-CC
Height*
- Raise* (in.)
BLIND END
Part No. BE
BONDING JUMPER
Part No. CBJ
W
Catalog Number
Load Depth
3
4
5
6
Finish
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304SS)
Width
-06BE = 6"
-09BE = 9"
-12BE = 12"
-18BE = 18"
-24BE = 24"
-30BE = 30"
-36BE = 36"
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
Catalog No.
CBJ-C
Dimensional Data
AWG 1/0 copper wire
1512" long overall
CBJ-4C
AWG 4/0 copper wire
1512" long overall
NOTE: No hardware supplied.
Example: 34-12BE for 3" load depth, aluminum, 12'' wide Blind End.
4-3 0
Catalog No.
9056-EP
9057-EP
9056-SS
9057-SS
Capacity
1/0 2/0 3/0
4/0 250 MCM
1/0 2/0 3/0
4/0 250 MCM
Dimensions
1" w x 2" long
1" w x 238" long
1" w x 2" long
1" w x 238" long
COPE HAT
Accessories
COPEHAT
CONDUIT-TO-CABLE TRAY CLAMP
Size
12" 34"
1" 114"
Std. Pkg.
50
20
Size
12" 34"
1" 114"
112" 2"
212" 3"
312" 4"
Size Rigid
38" to 12"
34"
1"
114"
112"
2"
Size EMT
12"
34"
1"
114"
112"
2"
BOX CONNECTOR
Part No. CB
14 Gage Steel
.080" Aluminum
NOTE: 14"-20 carriage bolts,
flat washers, hex nuts furnished.
Std. Pkg.
10
10
5
5
2
Catalog Number
Load Depth
3
4
5
6
Finish
2 - (Mill Galv.)
3 - (HDGAF)
4 - (Alum.)
U - (304SS)
Width
-06CB = 6" (152mm)
-09CB = 9" (229mm)
-12CB = 12" (305mm)
-18CB = 18" (457mm)
-24CB = 24" (610mm)
-30CB = 30" (762mm)
-36CB = 36" (914mm)
COPE Hat
Catalog No.
TB6210
TB6212
Catalog No.
CCB-050
CCB-075
CCB-100
CCB-125
CCB-150
CCB-175
CCB-200
Example: 34-12CB for 3" load depth, aluminum, 12" wide, Box
Connector.
24"
Tray Width
Self-drilling, Self-tapping
Sheet Metal Screws
#EM-CC, (10) Included
Tray-to-Box Connector
(2) Included,
Hardware Included
Wall Thickness
Up to 1'
Solid Bottom
One Piece
Pan Type Tray
Connectors, One
Pair Included
4-3 1
Barrier Strips
COPEHAT
BARRIER STRIP STRAIGHT SECTION
Part No. SB
Catalog Number
Furnished with 8 self tapping screws.
Load Depth
3
4
5
6
.22" x .75" Slots
Finish
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304 SS)
9"
412"
Finish
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304 SS)
Example: 34-01FB-06 for 3" load depth, aluminum fitting barrier, 6'
long.
Furnished with 4 self tapping screws.
Load Depth
3
4
5
6
Finish
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304 SS)
Bend (deg.)
90
60
45
30
Basic No.
OB = Outside
IB = Inside
Radius
12" (305mm)
24" (610mm)
36" (914mm)
Example: 34-90OB-12 for 3" load depth, aluminum 90 outside vertical barrier with 12"
radius.
(OB Vert. Elbow outside shown)
Furnished with sufficient clamp assemblies for installation.
Additional clamp assemblies may be ordered separately.
COVER SCREW
Part No. EM-CC (electrogalv. steel)
Part No. EM-CC-SS (stainless steel)
No. 10 x 58" long, self drilling-self tapping hex head plated steel screw.
Suggested spacing: Indoor: 8 per 12'; Outdoor: 10 per 12'
4-3 2
COPE HAT
Accessories
COPEHAT
HOLD-DOWN CLAMP & EXPANSION GUIDE
(For expansion guide clamp, add suffix EX to catalog number.)
Catalog Number
Load Depth
3
4
5
6
Finish
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304 SS)
Basic No.
-50172
COPE Hat
Load Depth
3
4
5
6
4-3 3
Support Brackets
COPEHAT
GUSSET-TYPE SUPPORTS
13
For use with all types of Cope Ladder and Trough systems. Finish is mill-galvanized.
Order hardware separately.
Catalog
No.
9702-06
9702-09
9702-12
9702-15
9702-18
9702-24
9702-30
Trough
Width
6"
9"
12"
18"
24"
-
Ladder
Width
6"
9"
12"
18"
24"
A
612"
912"
1212"
1512"
1812"
2412"
3012"
Dimension
B
412"
412"
412"
412"
6"
6"
6"
C
3"
3"
3"
3"
412"
412"
412"
End-Load
Rating*
450 lbs.
375 lbs.
300 lbs.
260 lbs.
225 lbs.
200 lbs.
175 lbs.
CHANNEL-TYPE SUPPORTS
For use with all types of Cope Ladder and Trough systems. Finish is mill-galvanized.
Order hardware separately.
2"
8"
Standard Duty
4 7 8"
2"
13
End-Load
Rating*
350 lbs.
275 lbs.
230 lbs.
175 lbs.
16"
A
Catalog
Trough
Ladder
Dimension
No.
Width
Width
A
9721-24
18"
18"
24"
9721-30
24"
24"
30"
9721-36
30"
30"
36"
9721-42
36"
42"
* Uniform load rating is normally twice the end load rating.
6 14"
Heavy Duty
3
8"
Catalog
Tray
Length
Dimensions
Number
Width
L
A B C
10"
6"
2"
9037-12
6"
1214
9037-18
12"
1814"
11"
7"
212"
11"
7"
212"
9037-24
18"
2414"
12"
8"
4"
9037-30
24"
3014"
9037-36
30"
3614"
12"
8"
4"
9037-42
36"
4214"
12"
8"
4"
*Uniform load rating is normally twice the end-load rating.
Finish is hot-dip galvanized after fabrication. Order hardware separately.
4-3 4
End-Load
Rating*
480 lbs.
385 lbs.
320 lbs.
305 lbs.
End-Load
Rating*
2000 lbs.
2000 lbs.
1600 lbs.
1300 lbs.
1100 lbs.
900 lbs.
Catalog Number
9036-31
9036-37
9036-45
Tray Width
24"
30"
36"
Length L
3114"
3714"
4514"
End-Load Rating*
2000 lbs.
1800 lbs.
1500 lbs.
COPE HAT
COPEHAT
VERTICAL SUPPORTS
Cat. No.
For Use With
9043-37
414" Overall Height Side Members
9043
514" Overall Height Side Members
9025-98
614" & 714" Overall Height Side Members
Tray Supports can be bolted anywhere along the straight
runs. They can be bolted directly onto the coupler plates at
splices of straight runs and riser fittings, or they can be
bolted at any place in the run by field-drilling side rails.
Trough supports are used with either 38" or 12" hanger rods.
Finish is eIectrogalvanized.
Catalog Number
Assy. Type Channel Length* Channel Finish**
P200
14" (356mm) GV (Pre-Galv)
17" (432mm) HG (Hot Dipped Galv)
20" (508mm)
26" (661mm)
32" (813mm)
38" (966mm)
44" (1118mm)
Rod Diameter
38=38" (9.53mm)
12=12" (12.7mm)
Rod Length
000 No Rod
036 - 36" (914mm)
072 - 72" (1828mm)
120 - 120" (3048mm)
144 - 144" (3658mm)
Beam Clamp
A - Bridgeport
B - P2622
O - No Clamp
R - Rod Coupler
S - Special
COPE Hat
Example: P200-20-GV-12-036-B is a Single 20" pre-galvanized channel with 12" x 36" drop rod and P2622 clamp.
NOTE: *Order channel length 8" longer than tray width. For example, 44" channel for 36" tray.
** Other channel types and finishes available upon request. Contact factory.
Catalog Number
Assy. Type
T200E
T201E
Channel Length*
16" (407mm)
19" (483mm)
22" (559mm)
28" (712mm)
34" (864mm)
40" (1017mm)
46" (1169mm)
Channel Finish**
GV (Pre-Galv)
HG (Hot Dipped Galv)
Rod Diameter
38=38" (9.53mm)
12=12" (12.7mm)
Rod Length
000 No Rod
036 - 36" (914mm)
072 - 72" (1828mm)
120 - 120" (3048mm)
144 - 144" (3658mm)
Beam Clamp
A - Bridgeport
B - P2622
O - No Clamp
R - Rod Coupler
S - Special
Example: T200E-22-GV-12-036-B is a Single 22" pre-galvanized channel with 12" x 36" drop rod and P2622 clamp.
NOTE: *Order channel length 10" longer than tray width. For example, 46" channel for 36" tray.
** Other channel types and finishes available upon request. Contact factory.
4-3 5
Metal Framing
COPEHAT
Allied Support Systems offers a complete line of metal framing channel and components. A sample is shown below.
Please contact factory for more information.
CHANNEL STYLES
CHANNEL SIZES
Brackets
Concrete
Inserts
Framing
Fittings
Trolleys
Electrical
Fittings
4-3 6
Pipe Rollers
Pipe Hangers
Pipe Clamps
Post Bases
Spring Nuts
COPE HAT
Rollers
COPEHAT
Cope cable rollers are easily mounted and removed and are
applicable for small control cables as well as the largest armored
cables. All bearing wheels turn independently with a minimum of
friction. The freely running wheels are smooth surfaced and
closely spaced to prevent cable damage.
90 rollers are available in two sizes - 24" and 36" radius. Horizontal and vertical ball
bearing rollers assure easy pull and control on 90 turns at all points of contact. Cope 90
rollers can be top or inside mounted on any manufacturer's tray or ladder. Handles the
heaviest cable with ease.
Catalog Number
Tray Width
OR-1218
OR-1824
OR-2430
OR-3036
12 to 18" tray
18 to 24" tray
24 to 30" tray
30 to 36" tray
COPE Hat
4-3 7
COPEHAT
By specifying the NEMA class designation, you will use the
simplest, clearest, and most complete method of specification
available and automatically incorporate support span in feet,
working (allowable) load in pounds per linear foot, a safety factor
of 1.5, a concentrated load if present, and, all other design,
manufacturing and test standards including electrical continuity.
All you need to do is add the desired load depth, rung spacing,
radius of fittings, metal and finish. You may add accessory
information pursuant to your project. Here is a typical specification for an outdoor tray system where the working (allowable)
load has been determined to be approximately 75 pounds per
foot on support spans of 12'-0".
Typical Specification
8. Where slopes or horizontal bends of trays are not at the
Standard NEMA angles, use adjustable connectors. If the
angle is too great for cable bending radius, use
combinations of fitting and adjustable connectors.
9. Separate all cables of different voltages in the same tray
using the manufacturer's standard barriers and barrier
hold down system.
10. The Cable Hat Ladder system will be used as an equipment
grounding conductor.
11. To save space, fittings shall have no tangents. To facilitate
field installation use one pair of universal type connector
plates for rigid joints.
12. Cable Ladder to have hat type rungs arc welded to side
rails. Rungs shall not protrude below side rails. Outside
depth shall not exceed inside depth by more than 58".
Side rails to have flanges facing in. Trays shall be Cope
Hat Ladder System No. 3B4A as manufactured by
T.J. Cope, Inc.
4-3 8
COPE HAT
COPETROF
5
Corrugated Bottom Cable Trough System for Power,
Control, Instrumentation Cable, & Pneumatic Tubing
Pictorial Index
COPETROF
STRAIGHT LENGTH
Page 5-11
VERTICAL ELBOWS
Page 5-22 to 5-25
HORIZONTAL ELBOWS
Page 5-12 to 5-15
HORIZONTAL TEE
Page 5-16
VERTICAL TEE
Page 5-27
HORIZONTAL CROSS
Page 5-17
COVERS
Page 5-30
REDUCERS
Page 5-18 to 5-19
COVER ATTACHMENTS
Page 5-31
ADJUSTABLE ELBOWS
Page 5-20
CONNECTORS
Page 5-28
45 "Y" BRANCH
Page 5-21
5-2
COPE TROF
GENERAL AND
TECHNICAL
INFORMATION
COPE TROF
FITTINGS
COVERS
CONNECTORS
ACCESSORIES
Contents
COPE Trof
COPETROF
5-3
Selection Chart:
COPETROF
Cope Trof-Aluminum
NEMA CLASS, PHYSICAL AND STRUCTURAL PROPERTIES
NEMA
Standard
VE-1
Load/Span
Class
NEMA
Load/Span
Cope
System
Number
8A-12A
50 lb./ft.
5234
3"
(76mm)
312"
12' span
1B44
4"
(102mm)
1B54
1B54
5"
3B64
6"
75 lb./ft.
3B44
12' span
1B54
3B64
100 lb./ft.
12' span
12B
12C
16A
50 lb./ft.
16' span
16B
75 lb./ft.
16' span
16C
Flange
Width
(in.)
Section
Modulus
of 2 Rails
Sx
(in.3)
Moment
of
Inertia
ix
(in.4)
Min X-Sect.
Area of 2
Rails per
NEC 318-7
(sq. in.)
(89mm)
1316
0.800
.700
.60
414"
(108mm)
1316
0.898
.911
.60
(127mm)
514"
(133mm)
1316
1.142
1.436
.60
(152mm)
614"
(159mm)
1316
.1.614
2.360
1.00
4"
(102mm)
414"
(108mm)
1316
1.148
1.158
.60
1B54
5"
(127mm)
514"
(133mm)
1316
1.142
1.436
.60
6"
(152mm)
614"
(159mm)
1316
1.614
2.360
.60
5B44
4"
(102mm)
434"
(108mm)
1316
1.646
1.529
1.00
3B54
5"
(127mm)
514"
(133mm)
1316
1.522
1.867
1.00
(159mm)
1316
1.944
2.933
1.00
(108mm)
1316
1.646
1.529
1.00
20B
Side
Rail Height
5B64
6"
(152mm)
5B44
4"
(102mm)
414"
7454
5"
(127mm)
514"
(133mm)
114
2.396
3.146
1.50
1D64
6"
(152mm)
614"
(159mm)
114
2.378
3.601
1.00
3D44
4"
(102mm)
414"
(108mm)
114
2.242
2.203
1.00
(133mm)
114
2.396
3.146
1.50
(159mm)
114
2.378
3.601
1.00
7454
5"
(127mm)
514"
1D64
6"
(152mm)
614"
(108mm)
114
2.782
2.869
1.50
(133mm)
114
3.434
4.373
2.00
100 lb./ft.
5D44
4"
(102mm)
414"
16' span
3D54
5"
(127mm)
514"
(152mm)
614"
(159mm)
114
4.186
6.012
2.00
(108mm)
114
2.242
2.203
1.00
(133mm)
114
2.396
3.146
1.50
6"
50 lb./ft.
3D44
4"
(102mm)
414"
20' span
7454
5"
(127mm)
514"
(159mm)
114
2.378
3.601
1.00
(133mm)
114
3.434
4.373
2.00
75 lb./ft.
20' span
20C
Nominal
Load Depth
614"
7D64
20A
Cope
Systems
Certified
by CSA
1D64
6"
(152mm)
614"
3D54
5"
(127mm)
514"
(152mm)
614"
(159mm)
114
4.186
6.012
2.00
7D64
6"
100 lb./ft.
5D54
5"
(127mm)
514"
(133mm)
114
3.910
5.010
2.00
20' span
7D64
6"
(152mm)
614"
(159mm)
114
4.186
6.012
2.00
(152mm)
614"
(159mm)
114
5.130
7.850
2.00
(152mm)
614"
(159mm)
5.804
8.728
2.00
EXTRA HEAVY DUTY - VERY LONG SPAN TRAYS - SOLID OR VENTILATED BOTTOMS
9D64
7G64
Note:
5-4
6"
6"
COPE TROF
Selection Chart:
COPETROF
Cope Trof-Aluminum
LOAD AND DEFLECTION DATA FOR ALUMINUM TROF
Working (Allowable) Load Capacity, Evenly Distributed - Tested per NEMA Standard VE-1
Span (Ft.) - Simple Beam - SAFETY FACTOR: 1.5
6 Ft. Span
w
5234
207
1B44
222
1B54
3B64
8 Ft. Span
k
10 Ft. Span
d
12 Ft. Span
.43
.002 117
.77
.007
75
1.20 .016
52
1.73 .033
.35
.002 125
.63
.005
80
.99
55
1.42 .026
324
.33
.001 182
359
.22
3B44
354
1B54
3B64
.012
16 Ft. Span
w
20 Ft. Span
w
.59
.003 117
.87
.007
77
1.26 .016
191
.37
.002 115
.55
.005
75
.74
.45
.001 191
.76
78
1.57 .020
324
.33
.001 182
.59
.003 117
.87
.007
77
1.26 .016
359
.22
191
.37
.002 115
.55
.005
75
.74
5B44
362
.32
251
.69
3B54
394
.31
222
.55
.002 142
.86
5B64
480
.24
257
.40
.002 156
.60
.04
5B44
251
.69
51
2.26 .044
25
2.75 .110
7454
349
.51
.001 223
.80
79
1.85 .023
51
2.89 .057
1D64
380
.49
.001 222
.69
78
1.61 .021
50
2.51 .050
3D44
342
.72
82
2.74 .033
52
4.27 .082
7454
349
.51
.001 223
.80
79
1.85 .023
51
2.89 .057
1D64
380
.49
.001 222
.69
78
1.61 .021
50
2.51 .050
5D44
444
.71
.002 284 1.10 .004 188 1.53 .008 106 2.73 .026
65
4.07 .063
3D54
525
.55
.001 336
.86
76
3.14 .041
404
.76
.002 281 1.09 .004 158 1.94 .012 101 3.02 .030
7D64
102
.81
24 Ft. Span
w
25 Ft. Span
w
.010
.010
.008
3D44
82
2.74 .033
52
4.27 .082
7454
79
1.85 .023
51
2.89 .057
1D64
78
1.61 .021
50
2.51 .050
3D54
76
3.14 .041
7D64
5D54
7D64
9D64
7G64
451 1.20 .003 253 2.14 .008 162 3.35 .020 112 4.79 .043 104 5.24 .050
68
3.23 .048
5-5
COPE Trof
Cope
Sys.
No.
Selection Chart:
COPETROF
Cope Trof-Steel
NEMA CLASS, PHYSICAL AND STRUCTURAL PROPERTIES
NEMA
Standard
VE-1
Loan/Span
Class
NEMA
Load/Span
12A
12B
12C
16A
16B
20C
.389
.40
Type
304 SS
System
No.
50 lb./ft.
8232
8233
823U
3"
(76mm)
312"
(89mm)
1316
0.444
12' span
8242
8243
824U
8243
4"
(102mm)
414"
(108mm)
1316
0.592
.629
.40
8252
8253
825U
5"
(127mm)
514"
(133mm)
1316
0.816
1.071
.40
8262
8263
826U
6"
(152mm)
614"
(159mm)
1316
1.072
1.676
.70
Nominal
Load Depth
Side Rail
Height
75 lb./ft.
4232
4233
423U
3"
(76mm)
312"
(89mm)
1316
0.674
.590
.70
12' span
8B42
8B43
8B4U
4"
(102mm)
414"
(108mm)
1316
0.678
.685
.40
8252
8253
825U
5"
(127mm)
514"
(133mm)
1316
0.816
1.071
.40
8262
8263
826U
6"
(152mm)
614"
(159mm)
1316
1.072
1.676
.70
100 lb./ft.
6B42
6B43
6B4U
4"
(102mm)
414"
(108mm)
1316
0.834
.845
.70
12' span
6B52
6B53
GBSU
5"
(127mm)
514"
(133mm)
1316
1.140
1.436
.70
6262
6263
626U
6"
(152mm)
614"
(159mm)
1316
1.330
2.079
.70
50 lb./ft.
8D42
8D43
8D4U
4"
(102mm)
414"
(108mm)
114
0.852
.868
.40
16' span
6452
6453
645U
5"
(127mm)
514"
(133mm)
114
1.280
1.680
.70
6462
6463
646U
6"
(152mm)
614"
(159mm)
114
1.652
2.580
.70
(108mm)
114
1.056
1.076
.70
(133mm)
114
1.280
1.680
.70
75 lb./ft.
6D42
6D43
6D4U
4"
(102mm)
414"
16' span
6452
6453
645U
5"
(127mm)
514"
(152mm)
614"
(159mm)
114
1.652
2.580
.70
(108mm)
114
1.298
1.326
1.00
(133mm)
114
1.280
1.680
.70
6463
646U
6"
100 lb./ft.
4D42
4D43
4D4U
4"
(102mm)
414"
16' span
6452
6453
645U
5"
(127mm)
514"
(152mm)
614"
(159mm)
114
1.652
2.580
.70
(108mm)
114
1.056
1.076
.70
(133mm)
114
1.280
1.680
.70
6463
646U
6"
50 lb./ft.
6D42
6D43
6D4U
4"
(102mm)
414"
20' span
6452
6453
645U
5"
(127mm)
514"
(152mm)
614"
(159mm)
114
1.652
2.580
1.00
(108mm)
114
1.758
1.802
1.00
(133mm)
114
1.744
2.209
1.00
1.814
2.743
1.00
6462
20B
Minimum
X-Sect.
Area of 2
Rails per
NEC 318-7
(sq. in.)
HDGAF
System
No.
6462
20A
Moment
of
Inertia
Ix
(in.4)
Mill
Galv.
System
No.
6462
16C
Section
Modulus
of 2
Flange Rails
Width
Sx
(in.)
(in.3)
Cope
HDGAF
Systems
Certified
by CSA
6463
646U
6"
75 lb./ft.
2D42
2D43
2D4U
4"
(102mm)
414"
20' span
4D52
4D53
4D5U
5"
(127mm)
514"
(159mm)
114
100 lb/ft.
20' span
6D62
6D63
6D6U
6"
(152mm)
614"
2D52
2D53
2D5U
5"
(127mm)
514"
(133mm)
114
2.370
3.013
1.50
(152mm)
614"
(159mm)
114
2.240
3.389
1.00
614"
(159mm)
114
3.056
4.635
1.50
614"
(159mm)
114
3.536
5.315
1.50
4D62
4D63
4D6U
6"
EXTRA HEAVY DUTY - VERY LONG SPAN TRAYS - SOLID OR VENTILATED BOTTOMS
Note:
5-6
2D62
2D63
2D6U
11D62
11D63
11D6U
6"
6"
(152mm)
(152mm)
COPE TROF
Selection Chart:
COPETROF
Cope Trof-Steel
LOAD AND DEFLECTION DATA FOR STEEL TROF
Working (Allowable) Load Capacity, Evenly Distributed-Tested per NEMA Standard VE-1
Span (ft.)-Simple Beam - SAFETY FACTOR: 1.5
Cope
Sys.
No.
6 Ft. Span
w
8232/3/U
230
.52
.004
79
.79
.010
53
1.11 .021
8242/3/U
292
.23
164
.42
.003
103 .63
.006
69
.89 .013
8252/3/U
383
.18
210
.31
.001
127 .46
.004
83
.62 .007
8262/3/U
357
.11
194
.18
119 .28
.002
79
.38 .005
4232/3/U
358
.30
197
.53
.003
124 .81
.007
83
1.13 .014
8B42/3/U
360
.26
198
.46
.002
124 .70
.006
84
.98 .012
8252/3/U
383
.18
210
.31
.001
127 .46
.004
83
.62 .007
8262/3/U
357
.11
194
.18
119 .28
.002
79
.38 .005
6B42/3/U
453
.27
249
.47
.002
156 .71
.005
6B52/3/U
591
.21
325
.36
.001
203 .55
.003
137
.77 .006
6262/3/U
460
.11
250
.19
154 .29
.002
103
.40 .004
8D42/3/U
290
.53
.002
182 .81
.004
6452/3/U
444
.42
273 .63
.002
186
6462/3/U
574
.42
367 .55
.001
245
6D42/3/U
381
.56
.001
244 .88
.004
6452/3/U
444
.42
273 .63
.002
186
6462/3/U
574
.42
367 .55
.001
245
4D42/3/U
487
.58
.001
312 .91
.003
6452/3/U
444
.42
273 .63
.002
186
6462/3/U
574
.42
367 .55
.001
245
8 Ft. Span
w
10 Ft. Span
12 Ft. Span
d
16 Ft. Span
w
65
88
24 Ft. Span
w
25 Ft. Span
w
1.91 .029
2.08 .024
2.08 .024
52 2.98 .057
6452/3/U
186
53 1.94 .037
6462/3/U
245
66 1.59 .024
2D42/3/U
94 3.23 .034
4D52/3/U
85 2.40 .028
6D62/3/U
269
81 1.82 .022
2D52/3/U
4D62/3/U
296
2D62/3/U
390
.85 .002
221
1.40 .006
1.91 .024
73 2.38 .033
11D62/3/U
434
.66
244
1.17 .005
2.62 .024
COPE Trof
6D42/3/U
88
20 Ft. Span
5-7
Ordering Information
COPETROF
HOW TO ORDER:
Order by the Cope full catalog numbers given in this catalog. Please pay careful attention to the part numbering structure. Example:
Catalog No. 1B44-06SL-12-V is a 4-inch load depth aluminum ladder with a 1316" flange, 6 inches wide, straight length 12 feet long,
with ventilated bottom.
STRAIGHT LENGTH
FITTINGS
System No.
Prefix No.
1B44-06SL-12-V
Side Rail
Thickness
Bottom
Flange
Width
Load
Depth
Material
Finish
Length (Feet)
Basic Part
System Number
8 - 18 ga.
6 - 16 ga.
4 - 14 ga.
2 - 12 ga.
11 - 11 ga.
Load Depth
3"
4"
5"
6"
(76mm)
(102mm)
(127mm)
(152mm)
Material Finish
2 - Mill-Galv.
3 - HDGAF
4 - Aluminum
U - 304SS
*B - 1316" (21mm)
*D - 114" (32mm)
*G - 2" (51mm)
Flange Width
2 - 1316" (21mm)
4 - 114" (32mm)
7 - 2"
(51mm)
5-8
Flange
Width
Load
Depth
Material
Finish
Bottom
Radius (Inches)
Basic Part
Width
Width
244-069F-12 - V
Description
Width (in.)
-06=6" (152mm)
-09=9" (229mm)
-12=12" (305mm)
-18=18" (457mm)
-24=24" (610mm)
-30=30" (762mm)
-36=36" (914mm)
COPE TROF
COPETROF
Maximum
Support
Span
Deflection
Meets
CSA
Elec.
Tests
(21mm)
97
3m
12.3mm
Yes
97
3m
9.7mm
Yes
Side Rail
Height
Flange
Width
514" (133mm)
1316"
CSA LOADS
Cope systems given in these charts are for projects that require
cabletroughs certified by the Canadian Standards Association
standard number C22.2 No. 126. Where CSA C22.2 is not
mandatory you may want to consider one of the other Cope
systems offered on the selection charts (page 5-4 & 5-6). Loads for
CSA classes C1, D1, and E when supported on shorter spans are
given in the following chart:
FACTOR OF SAFETY: 1.5
CLASS
1.5M
2.0M
C1
D1
E
259
-
164
-
2.5M
3.0M
4.0M
5.0M
6.0M
119
-
97
179
299
113
189
82
137
67
112
COPE Trof
CSA
Cope
Class
System
See CSA
Certified
Load
Std. C22.2
by CSA
Depth
ALUMINUM- Safety Factor: 1.5
C1
1B54
434" (121mm)
NOTE: For other CSA approved systems please contact the factory.
5-9
Ordering Information
COPETROF
Cope CSA Standards C22-2 Cabletrough Ventilated & Solid Bottom Type
HOW TO ORDER:
Explanation of Cope's Canadian Standards cable tray catalog
numbers is described below. Use the system numbers given in
selection charts for straight sections, or the fitting prefix numbers
given in fitting tables. Be sure to follow system number or the
fitting prefix with the item "description" number. The list below
gives the CSA certified items carrying the CSA label.
STRAIGHT LENGTH
FITTINGS
System No.
Prefix No.
1B54-06SL-10-V
Side Rail
Thickness
Bottom
Flange
Width
Load
Depth
Material
Finish
Length (Feet)
Basic Part
254-069F-12-V
Flange
Width
Load
Depth
Material
Finish
Bottom
Radius (Inches)
Basic Part
Width
Width
System Number
Thickness Steel (Ga.)
8 - 18 ga.
6 - 16 ga.
Thickness Alum (in.)**
1- thinner
Flange Width
2 - 1316" (21mm)
*B - 1316" (21mm)
*D - 114" (32mm)
Load Depth
334" (95mm)
534" (121mm)
Description
Material Finish
3 - HDGAF,
CSA Class 1
4 - Aluminum
Plain Finish
3- thicker
5-1 0
Width (in.)
06=6" (152mm)
09=9" (229mm)
12=12" (305mm)
18=18" (457mm)
24=24" (610mm)
30=30" (762mm)
36=36" (914mm)
COPE TROF
Cope Trof
COPETROF
STRAIGHT LENGTH
Part No. SL
Catalog Number
CORRUGATED
VENTILATED
BOTTOM
System
Width
-06=6"
-09=9"
-12=12"
-18=18"
-24=24"
-30=30"
-36=36"
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
SL
Length
Bottom Type
NEMA
12' (3.7m)*
24' (7.3m)*
-S (solid)
-V (ventilated)
CSA
-10' (3m)
*12 all NEMA Classes, 24 NEMA Classes 16A, 16B, 16C, 20A, 20B, 20C.
Example: 1B44-06SL-12-V is a 4" load depth aluminum Trof with 1316" flange, 6" wide, 12'
long, with ventilated bottom.
SIDE RAIL
HEIGHT
CORRUGATED
SOLID
BOTTOM
LOAD
DEPTH
SIDE RAIL
TOP FLANGE
See
Pages
5-4,
5-7
Basic No.
LENGTH
WIDTH
Conversion Table
English
Metric (mm)
6" 9" 12" 18" 24" 30" 36" 12'-0" 24'-0" 10'-0" 20'-0"
152 229 305 457 610 762 914 3658 7316 3048 6096
Sufficient connectors are supplied to assemble straight sections and fittings for each order. Connectors for field cuts to be ordered separately.
3" (76mm)
312" (89mm)
334" (95mm)
and
434" (121mm)
414" (108mm)
and
514" (133mm)
534" (146mm)
614" (159mm)
Pre-Galvanized Steel
ASTM A-653-G90 CQ (18 & 16 Gage)
ASTM A-653-G90 CQ (14 & 12 Gage)
ASTM A-653-G90 CQ
ASTM A-569
ASTM A-591 Class C
SAE J429 Grade 1
(ASTM A-307 Grade A)
ASTM B-633.0002" Zinc
ASTM A-653-G90 CQ
Aluminum
AA-6063-T6 Extruded
AA-6063-H34
AA-5052-H34
5-1 1
COPE Trof
Solid Trof have the same corrugations but have no holes. Materials:
Aluminum, Hot Dip-Mill galvanized (pre-galvanized) to
ASTM A-924, Hot Dip Galvanized after Fabrication (HDGAF) to
ASTM A-123.
90 Horizontal Elbow
COPETROF
PART NO. 9F
A
R
A
W
COPE FITTINGS are offered in 12", 24" and 36" radius. When
small or in-between angles are needed, use Copes Adjustable
Connectors.
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
Catalog Number
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 069F-12
Prefix- 099F-12
Prefix- 129F-12
15"
1612"
18"
(381mm)
(419mm)
(457mm)
18"
24"
39"
(457mm)
(610mm)
(762mm)
Prefix- 189F-12
Prefix- 249F-12
Prefix- 309F-12
21"
24"
27"
(533mm)
(610mm)
(686mm)
36"
(914mm)
Prefix- 369F-12
30"
(762mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 069F-24
Prefix- 099F-24
Prefix- 129F-24
27"
2812"
30"
(686mm)
(724mm)
(762mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 189F-24
Prefix- 249F-24
Prefix- 309F-24
33"
36"
39"
(838mm)
(914mm)
(991mm)
36"
(914mm)
Prefix- 369F-24
42"
(1067mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 069F-36
Prefix- 099F-36
Prefix- 129F-36
39"
4012"
42"
(991mm)
(1029mm)
(1067mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 189F-36
Prefix- 249F-36
Prefix- 309F-36
45"
48"
51"
(1143mm)
(1219mm)
(1295mm)
36"
(914mm)
Prefix- 369F-36
54"
(1372mm)
5-1 2
A Dimension
Example: 234-129F-12-V
COPE TROF
60 Horizontal Elbow
COPETROF
PART NO. 6F
60
R
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
Catalog Number
B Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 066F-12
Prefix- 096F-12
Prefix- 126F-12
13"
1414"
1558"
(330mm)
(362mm)
(397mm)
712"
814"
9"
(191mm)
(210mm)
(229mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 186F-12
Prefix- 246F-12
Prefix- 306F-12
1814"
2034"
2338"
(464mm)
(527mm)
(594mm)
1012"
12"
1312"
(267mm)
(305mm)
(343mm)
36"
(914mm)
Prefix- 366F-12
26"
(660mm)
15"
(381mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 066F-24
Prefix- 096F-24
Prefix- 126F-24
2338"
2434"
26"
(594mm)
(629mm)
(660mm)
1312"
1414"
15"
(343mm)
(362mm)
(381mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 186F-24
Prefix- 246F-24
Prefix- 306F-24
2858"
3114"
3334"
(727mm)
(794mm)
(857mm)
1612"
18"
1912"
(416mm)
(457mm)
(495mm)
36"
(914mm)
Prefix- 366F-24
3638"
(924mm)
21"
(533mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 066F-36
Prefix- 096F-36
Prefix- 126F-36
3334"
3518"
3638"
(857mm)
(892mm)
(924mm)
1912"
2014"
21"
(495mm)
(514mm)
(533mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 186F-36
Prefix- 246F-36
Prefix- 306F-36
39"
4158"
4418"
(991mm)
(1057mm)
(1121mm)
2212"
24"
2512"
(572mm)
(610mm)
(648mm)
36"
(914mm)
Prefix- 366F-36
4634"
(1187mm)
27"
(686mm)
A Dimension
COPE Trof
Radius - R
Example: 234-126F-12-V
5-1 3
45 Horizontal Elbow
COPETROF
PART NO. 4F
45
A
R
W
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
A Dimension
B Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 064F-12
Prefix- 094F-12
Prefix- 124F-12
1058"
1158"
1234"
(270mm)
(295mm)
(324mm)
438"
478"
514"
(111mm)
(124mm)
(133mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 184F-12
Prefix- 244F-12
Prefix- 304F-12
1478"
17"
1918"
(378mm)
(432mm)
(486mm)
618"
7"
778"
(156mm)
(178mm)
(200mm)
36"
(914mm)
Prefix- 364F-12
2114"
(540mm)
834"
(222mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 064F-24
Prefix- 094F-24
Prefix- 124F-24
1918"
2018"
2114"
(486mm)
(511mm)
(540mm)
778"
838"
834"
(200mm)
(213mm)
(222mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 184F-24
Prefix- 244F-24
Prefix- 304F-24
2338"
2512"
2758"
(594mm)
(702mm)
(702mm)
958"
1012"
1112"
(244mm)
(267mm)
(292mm)
36"
(914mm)
Prefix- 364F-24
2934"
(756mm)
1238"
(314mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 064F-36
Prefix- 094F-36
Prefix- 124F-36
2758"
2858"
2934"
(702mm)
(727mm)
(756mm)
1112"
1178"
1238"
(292mm)
(302mm)
(314mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 184F-36
Prefix- 244F-36
Prefix- 304F-36
3178"
34"
3618"
(810mm)
(864mm)
(918mm)
1314"
1418"
15"
(337mm)
(359mm)
(381mm)
36"
(914mm)
Prefix- 364F-36
3814"
(972mm)
1578"
(403mm)
5-1 4
Catalog Number
Example: 234-124F-12-V
COPE TROF
30 Horizontal Elbow
COPETROF
PART NO. 3F
30
A
R
W
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
Catalog Number
B Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 063F-12
Prefix- 093F-12
Prefix- 123F-12
712"
814"
9"
(191mm)
(210mm)
(229mm)
2"
214"
238"
(51mm)
(57mm)
(60mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 183F-12
Prefix- 243F-12
Prefix- 303F-12
1012"
12"
1312"
(267mm)
(305mm)
(343mm)
278"
314"
358"
(73mm)
(83mm)
(92mm)
36"
(914mm)
Prefix- 363F-12
15"
(381mm)
4"
(102mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 063F-24
Prefix- 093F-24
Prefix- 123F-24
1312"
1414"
15"
(343mm)
(362mm)
(381mm)
358"
378"
4"
(92mm)
(98mm)
(102mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 183F-24
Prefix- 243F-24
Prefix- 303F-24
1612"
18"
1912"
(419mm)
(457mm)
(495mm)
438"
478"
514"
(111mm)
(124mm)
(133mm)
36"
(914mm)
Prefix- 363F-24
21"
(533mm)
558"
(143mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 063F-36
Prefix- 093F-36
Prefix- 123F-36
1912"
2014"
21"
(495mm)
(514mm)
(533mm)
514"
512"
558"
(133mm)
(140mm)
(143mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 183F-36
Prefix- 243F-36
Prefix- 303F-36
2212"
24"
2512"
(572mm)
(610mm)
(648mm)
6"
612"
678"
(152mm)
(165mm)
(175mm)
36"
(914mm)
Prefix- 363F-36
27"
(686mm)
714"
(184mm)
A Dimension
COPE Trof
Radius - R
Example: 234-123F-12-V
5-1 5
Horizontal Tee
COPETROF
PART NO. FT
B
A
W
C
A
R
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
A Dimension
B Dimension
C Dimension
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 06FT-12
Prefix- 09FT-12
Prefix- 12FT-12
15"
1612"
18"
(381mm)
(419mm)
(457mm)
30"
33"
36"
(762mm)
(838mm)
(914mm)
18"
21"
24"
(457mm)
(533mm)
(610mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18FT-12
Prefix- 24FT-12
Prefix- 30FT-12
21"
24"
27"
(533mm)
(610mm)
(686mm)
42
48"
54"
(1067mm)
(1219mm)
(1372mm)
30"
36"
42"
(762mm)
(914mm)
(1067mm)
36"
(914mm)
Prefix- 36FT-12
30"
(762mm)
60"
(1524mm)
48"
(1219mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 06FT-24
Prefix- 09FT-24
Prefix- 12FT-24
27"
2812"
30"
(686mm)
(724mm)
(762mm)
54"
57"
60"
(1372mm)
(1448mm)
(1524mm)
30"
33"
36"
(762mm)
(838mm)
(914mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18FT-24
Prefix- 24FT-24
Prefix- 30FT-24
33"
36"
39"
(838mm)
(914mm)
(991mm)
66"
72"
78"
(1676mm)
(1829mm)
(1981mm)
42"
48"
54"
(1067mm)
(1219mm)
(1372mm)
36"
(914mm)
Prefix- 36FT-24
42"
(1067mm)
84"
(2134mm)
60"
(1524mm)
6"
9"
12"
(152mm)
(229mm)
(305mm)
Prefix- 06FT-36
Prefix- 09FT-36
Prefix- 12FT-36
39"
4012"
42"
(991mm)
(1029mm)
(1067mm)
78"
81"
84"
(1981mm)
(2057mm)
(2134mm)
42"
45"
48"
(106mm)
(1143mm)
(1219mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18FT-36
Prefix- 24FT-36
Prefix- 30FT-36
45"
48"
51"
(1143mm)
(1219mm)
(1295mm)
90"
96"
102"
(2286mm)
(2438mm)
(2591mm)
54"
60"
66"
(1372mm)
(1524mm)
(1676mm)
36"
(914mm)
Prefix- 36FT-36
54"
(1372mm)
108"
(2743mm)
72"
(1829mm)
5-1 6
Catalog Number
Example: 234-12FT-12-V
COPE TROF
Horizontal Cross
COPETROF
PART NO. FC
A
B
A
R
W
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
12"
(305mm)
24"
(610mm)
36"
(914mm)
Width - W
A Dimension
B Dimension
6"
9"
12
(152mm)
(229mm)
(305mm)
Prefix- 06FC-12
Prefix- 09FC-12
Prefix- 12FC-12
15"
1612
18"
(381mm)
(419mm)
(457mm)
30"
33"
36"
(762mm)
(838mm)
(914mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18FC-12
Prefix- 24FC-12
Prefix- 30FC-12
21"
24"
27"
(533mm)
(610mm)
(686mm)
42"
48"
54"
(1067mm)
(1219mm)
(1372mm)
36"
(914mm)
Prefix- 36FC-12
30"
(762mm)
60"
(1524mm)
6"
9"
12
(152mm)
(229mm)
(305mm)
Prefix- 06FC-24
Prefix- 09FC-24
Prefix- 12FC-24
27"
2812"
30"
(686mm)
(724mm)
(762mm)
54"
57"
60"
(1372mm)
(1448mm)
(1524mm)
18
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18FC-24
Prefix- 24FC-24
Prefix- 30FC-24
33"
36"
39"
(838mm)
(914mm)
(991mm)
66"
72"
78"
(16 76mm)
(1829mm)
(1981mm)
36"
(914mm)
Prefix- 36FC-24
42"
(1067mm)
84"
(2134mm)
6"
9"
12
(152mm)
(229mm)
(305mm)
Prefix- 06FC-36
Prefix- 09FC-36
Prefix- 12FC-36
39"
4012
42"
(991mm)
(1029mm)
(1067mm)
78"
81
84"
(1981mm)
(2057mm)
(2134mm)
18"
24"
30"
(457mm)
(610mm)
(762mm)
Prefix- 18FC-36
Prefix- 24FC-36
Prefix- 30FC-36
45"
48"
51"
(1143mm)
(1219mm)
(1295mm)
90"
96"
102"
(2286mm)
(2438mm)
(2591mm)
36"
(914mm)
Prefix- 36FC-36
54"
(1372mm)
108"
(2743mm)
Catalog Number
COPE Trof
Radius - R
Example: 234-12FC-12-V
5-1 7
Straight Reducer
COPETROF
PART NO. ST
W1
12
W
Straight (ST)
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
Width - W1
Cat. No.Straight
A Dimension
30"
24"
18"
(762mm)
(610mm)
(457mm)
Prefix-36ST-30
Prefix-36ST-24
Prefix-36ST-18
3"
6"
9"
12"
9"
6"
(305mm)
(229mm)
(152mm)
Prefix-36ST-12
Prefix-36ST-09
Prefix-36ST-06
12"
(305mm)
1312" (343mm)
15"
(381mm)
24"
18"
12"
(610mm)
(457mm)
(305mm)
Prefix-30ST-24
Prefix-30ST-18
Prefix-30ST-12
3"
6"
9"
9"
6"
(229mm)
(152mm)
Prefix-30ST-09
Prefix-30ST-06
1012" (267mm)
12"
(304mm)
18"
12"
9"
(457mm)
(305mm)
(229mm)
Prefix-24ST-18
Prefix-24ST-12
Prefix-24ST-09
3"
6"
712"
(76mm)
(152mm)
(191mm)
6"
(152mm)
Prefix-24ST-06
9"
(229mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
Prefix-18ST-12
Prefix-18ST-09
Prefix-18ST-06
3"
412"
6"
(76mm)
(114mm)
(152mm)
(305mm)
12"
9"
6"
(229mm)
(152mm)
Prefix-12ST-09
Prefix-12ST-06
112"
3"
(38mm)
(76mm)
9"
6"
(152mm)
Prefix-09ST-06
112"
(38mm)
36"
(914mm)
30"
(762mm)
24"
(610mm)
18"
(457mm)
(76mm)
(152mm)
(229mm)
(76mm)
(152mm)
(229mm)
(229mm)
*Add suffix -V (vented) or -S (solid) to catalog number.
5-1 8
Example: 234-36ST-12-V
COPE TROF
COPETROF
W1
W1
12
12
B
W
Left Hand (LH)
B
W
Right Hand (RH)
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
Prefix-36LH-30
Prefix-36LH-24
Prefix-36LH-18
Prefix-36RH-30
Prefix-36RH-24
Prefix-36RH-18
6"
12"
18"
(152mm)
(305mm)
(457mm)
15"
12"
9"
(381mm)
(305mm)
(229mm)
30"
24"
18"
(914mm)
(610mm)
(457mm)
Prefix-36LH-12
Prefix-36LH-09
Prefix-36LH-06
Prefix-36RH-12
Prefix-36RH-09
Prefix-36RH-06
24"
27"
30"
(610mm)
(686mm)
(762mm)
6"
412"
3"
(152mm)
(114mm)
(76mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
Prefix-30LH-24
Prefix-30LH-18
Prefix-30LH-12
Prefix-30RH-24
Prefix-30RH-18
Prefix-30RH-12
6"
12"
18"
(152mm)
(305mm)
(457mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
24"
18"
12"
(610mm)
(457mm)
(305mm)
Prefix-30LH-09
Prefix-30LH-06
Prefix-30RH-09
Prefix-30RH-06
21"
24"
(533mm)
(610mm)
412"
3"
(114mm)
(76mm)
9"
6"
(229mm)
(152mm)
Prefix-24LH-18
Prefix-24LH-12
Prefix-24LH-09
Prefix-24RH-18
Prefix-24RH-12
Prefix-24RH-09
6"
12"
15"
(152mm)
(305mm)
(381mm)
9"
6"
412"
(229mm)
(152mm)
(114mm)
18"
12"
9"
(457mm)
(305mm)
(229mm)
Prefix-24LH-06
Prefix-24RH-06
18"
(457mm)
3"
(76mm)
6"
(152mm)
18"
Prefix-18LH-12
Prefix-18LH-09
Prefix-18LH-06
Prefix-18RH-12
Prefix-18RH-09
Prefix-18RH-06
6"
9"
12"
(152mm)
(229mm)
(305mm)
6"
412"
3"
(152mm)
(114mm)
(76mm)
12"
9"
6"
(305mm)
(229mm)
(152mm)
12"
(305mm)
Prefix-12LH-09
Prefix-12LH-06
Prefix-12RH-09
Prefix-12RH-06
3"
6"
(76mm)
(152mm)
412"
3"
(114mm)
(76mm)
9"
6"
(229mm)
(152mm)
9"
Prefix-09LH-06
Prefix-09RH-06
3"
(76mm)
(76mm)
6"
(152mm)
36"
(914mm)
30"
(762mm)
24"
(610mm)
(457mm)
A Dim.
B Dim.
3"
W1 Dim.
COPE Trof
Width - W
(229mm)
*Add suffix -V (vented) or -S (solid) to catalog number.
Example: 234-36LH-12-V
5-1 9
Adjustable Elbow
COPETROF
PART NO. AF
W 12"
6"
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
Width - W
A Dimension
Prefix- 06AF
Prefix- 09AF
6"
9"
(152mm)
(229mm)
8"
11"
(203mm)
(279mm)
Prefix- 12AF
Prefix- 18AF
12"
18"
(305mm)
(457mm)
14"
20"
(356mm)
(508mm)
Prefix- 24AF
Prefix- 30AF
24"
30"
(610mm)
(762mm)
26"
32"
(660mm)
(813mm)
Prefix- 36AF
36"
(914mm)
38"
(965mm)
Both rails at hinge break to be bonded if fitting is used as equipment grounding
conductor. * Add suffix-V (vented) or -S (solid) to catalog number.
Example: 234-12AF-V
5-2 0
COPE TROF
45 Y Branch
COPETROF
PART NO. LY AND RY
(RY Shown)
A
C
8"
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
Prefix- 06LY
Prefix- 09LY
Prefix- 06RY
Prefix- 09RY
6"
9"
(152mm)
(229mm)
2212"
(571mm)
(679mm)
1614"
13"
(289mm)
(330mm)
1118"
2138"
(413mm)
(543mm)
1138"
1334"
(283mm)
(349mm)
Prefix- 12LY
Prefix- 18LY
Prefix- 12RY
Prefix- 18RY
12"
18"
(305mm)
(457mm)
31"
(787mm)
3912" (1003mm)
2612"
3634"
(673mm)
(933mm)
1434"
1818"
(375mm)
(460mm)
1614"
2138"
(412mm)
(543mm)
Prefix- 24LY
Prefix- 30LY
Prefix- 24RY
Prefix- 30RY
24"
30"
(610mm)
(762mm)
48"
(1219mm)
5638" (1432mm)
47"
5714"
(1193mm)
(1454mm)
2112"
2434"
(546mm)
(629mm)
2612"
3158"
(673mm)
(803mm)
Prefix- 36LY
Prefix- 36RY
36"
(914mm)
65"
6712"
(1714mm)
2814"
(718mm)
3634"
(933mm)
Width - W
A Dim.
2634"
(1651mm)
B Dim.
C Dim.
D Dim.
Example: 234-12RY-V
5-2 1
COPE Trof
90 Vertical Elbow
COPETROF
PART NO. 9O (OUTSIDE)
A
A
R
90
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
12"
(305mm)
24"
(610mm)
36"
(914mm)
H Dim.
A Dim.
(89mm)
(108mm)
Prefix-(W)9I-12
Prefix-(W)9I-12
Prefix-(W)9O-12
Prefix-(W)9O-12
1334"
1418"
(349mm)
(359mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)9I-12
Prefix-(W)9I-12
Prefix-(W)9O-12
Prefix-(W)9O-12
1458"
1518"
(372mm)
(384mm)
312"
414"
(89mm)
(108mm)
Prefix-(W)9I-24
Prefix-(W)9I-24
Prefix-(W)9O-24
Prefix-(W)9O-24
2534"
2618"
(654mm)
(664mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)9I-24
Prefix-(W)9I-24
Prefix-(W)9O-24
Prefix-(W)9O-24
2658"
2718"
(676mm)
(689mm)
312"
414"
(89mm)
(108mm)
Prefix-(W)9I-36
Prefix-(W)9I-36
Prefix-(W)9O-36
Prefix-(W)9O-36
3734"
3618"
(959mm)
(969mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)9I-36
Prefix-(W)9I-36
Prefix-(W)9O-36
Prefix-(W)9O-36
3658"
3918"
(981mm)
(994mm)
5-2 2
312"
414"
12 for 12" w
Example: 234-129O-12-V
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
COPE TROF
60 Vertical Elbow
COPETROF
PART NO. 60 (OUTSIDE)
60
C
R
H
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
12"
(305mm)
24"
(610mm)
36"
(914mm)
312"
414"
H Dim.
(89mm)
(108mm)
Prefix-(W)6I-12
Prefix-(W)6I-12
Prefix-(W)6O-12
Prefix-(W)6O-12
1178"
1214"
(302mm)
(311mm)
678"
718"
(175mm)
(181mm)
1334"
1418"
(349mm)
(359mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)6I-12
Prefix-(W)6I-12
Prefix-(W)6O-12
Prefix-(W)6O-12
1258"
1318"
(321mm)
(334mm)
738"
758"
(187mm)
(194mm)
1458"
1518"
(372mm)
(384mm)
312"
414"
(89mm)
(108mm)
Prefix-(W)6I-24
Prefix-(W)6I-24
Prefix-(W)6O-24
Prefix-(W)6O-24
2214"
2258"
(565mm)
(575mm)
1278"
1318"
(327mm)
(334mm)
2534"
2618"
(654mm)
(664mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)6I-24
Prefix-(W)6I-24
Prefix-(W)6O-24
Prefix-(W)6O-24
2318"
2312"
(588mm)
(597mm)
1338"
13"
(340mm)
(330mm)
2658"
2718"
(676mm)
(689mm)
312"
414"
(89mm)
(108mm)
Prefix-(W)6I-36
Prefix-(W)6I-36
Prefix-(W)6O-36
Prefix-(W)6O-36
3234"
33"
(832mm)
(838mm)
1878"
1918"
(480mm)
(486mm)
3734"
3818"
(959mm)
(969mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)6I-36
Prefix-(W)6I-36
Prefix-(W)6O-36
Prefix-(W)6O-36
3312"
3378"
(851mm)
(861mm)
1938
1958"
(492mm)
(499mm)
3858"
3918"
(981mm)
(994mm)
12 for 12" w
A Dim.
B Dim.
C Dim.
Example: 234-126O-12-V
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
5-2 3
COPE Trof
Radius - R
45 Vertical Elbow
COPETROF
PART NO. 4O (OUTSIDE)
B
45
C
R
H
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
H Dim.
A Dim.
B Dim.
C Dim.
Prefix-(W)4I-12
Prefix-(W)4I-12
Prefix-(W)4O-12
Prefix-(W)4O-12
10"
(248mm)
(254mm)
4"
418"
(102mm)
(105mm)
1334"
414"
(89mm)
(108mm)
934"
1418"
(349mm)
(359mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)4I-12
Prefix-(W)4I-12
Prefix-(W)4O-12
Prefix-(W)4O-12
1038"
1034"
(264mm)
(273mm)
414"
412"
(108mm)
(114mm)
1458"
1518"
(372mm)
(384mm)
312"
414"
(89mm)
(108mm)
Prefix-(W)4I-24
Prefix-(W)4I-24
Prefix-(W)4O-24
Prefix-(W)4O-24
1814"
1812"
(464mm)
(470mm)
712"
758"
(191mm)
(194mm)
2534"
2618"
(654mm)
(664mm)
(610mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)4I-24
Prefix-(W)4I-24
Prefix-(W)4O-24
Prefix-(W)4O-24
1878"
1914"
(480mm)
(489mm)
778"
8"
(200mm)
(203mm)
2658"
2718"
(676mm)
(689mm)
36"
312"
414"
(89mm)
(108mm)
Prefix-(W)4I-36
Prefix-(W)4I-36
Prefix-(W)4O-36
Prefix-(W)4O-36
2634"
27"
(679mm)
(686mm)
1118"
1118"
(283mm)
(283mm)
3734"
3818"
(959mm)
(969mm)
(914mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)4I-36
Prefix-(W)4I-36
Prefix-(W)4O-36
Prefix-(W)4O-36
2738"
2758"
(695mm)
(702mm)
1138"
1112"
(289mm)
(292mm)
3858"
3918"
(981mm)
(994mm)
12"
(305mm)
24"
312"
5-2 4
12 for 12" w
Example: 234-124I-12-V
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
COPE TROF
30 Vertical Elbow
COPETROF
PART NO. 3O (OUTSIDE)
B
30
A
C
R
H
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
A Dim.
B Dim.
C Dim.
Prefix-(W)3I-12
Prefix-(W)3I-12
Prefix-(W)3O-12
Prefix-(W)3O-12
178"
(48mm)
(48mm)
1334"
718"
(175mm)
(181mm)
178"
414"
(89mm)
(108mm)
678"
1418"
(349mm)
(359mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)3I-12
Prefix-(W)3I-12
Prefix-(W)3O-12
Prefix-(W)3O-12
738"
758"
(187mm)
(194mm)
2"
2"
(51mm)
(51mm)
1458"
1518"
(372mm)
(384mm)
312"
414"
(89mm)
(108mm)
Prefix-(W)3I-24
Prefix-(W)3I-24
Prefix-(W)3O-24
Prefix-(W)3O-24
1278"
1318"
(327mm)
(334mm)
312"
312"
(89mm)
(89mm)
2534"
2618"
(654mm)
(664mm)
(610mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)3I-24
Prefix-(W)3I-24
Prefix-(W)3O-24
Prefix-(W)3O-24
1338"
1358"
(340mm)
(346mm)
358"
358"
(92mm)
(92mm)
2658"
2718"
(676mm)
(689mm)
36"
312"
414"
(89mm)
(108mm)
Prefix-(W)3I-36
Prefix-(W)3I-36
Prefix-(W)3O-36
Prefix-(W)3O-36
1878"
1938
(480mm)
(486mm)
518"
518"
(130mm)
(130mm)
3734"
3818"
(959mm)
(969mm)
(914mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)3I-36
Prefix-(W)3I-36
Prefix-(W)3O-36
Prefix-(W)3O-36
1938"
1958"
(492mm)
(499mm)
514"
514"
(133mm)
(133mm)
3858"
3918"
(981mm)
(994mm)
12"
(305mm)
24"
312"
12 for 12" w
Example: 234-123I-12-V
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
5-2 5
COPE Trof
Radius - R
COPETROF
PART NO. SR
H
A
R
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
12"
(305mm)
24"
(610mm)
36"
(914mm)
H Dim.
Catalog Number
A Dimension
412"
(89mm)
(108mm)
Prefix-(W)SR-12
Prefix-(W)SR-12
1614"
(394mm)
(413mm)
1334"
1418"
(349mm)
(359mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)SR-12
Prefix-(W)SR-12
1714"
1814"
(438mm)
(464mm)
1458"
1518"
(371mm)
(384mm)
312"
414"
(89mm)
(108mm)
Prefix-(W)SR-24
Prefix-(W)SR-24
2712"
2814"
(699mm)
(718mm)
2534"
2618"
(654mm)
(664mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)SR-24
Prefix-(W)SR-24
2914"
3014"
(743mm)
(768mm)
2658"
2718"
(676mm)
(689mm)
312"
414"
(89mm)
(108mm)
Prefix-(W)SR-36
Prefix-(W)SR-36
3912"
4014"
(1003mm)
(1022mm)
3734"
3818"
(959mm)
(968mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)SR-36
Prefix-(W)SR-36
4114"
4214
(1048mm)
(1073mm)
3858"
3918"
(981mm)
(994mm)
5-2 6
B Dimension
1512"
312"
12 for 12" w
Example: 234-12SR-12-V
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
COPE TROF
Vertical Tee
COPETROF
PART NO. VT
H
B
C
R
.40
.60
.60
.40
.70
1.00 1.00
.70
.70
1.00 1.00
.70
1.00
12"
(305mm)
24"
(610mm)
36"
(914mm)
H Dim.
Catalog Number
A Dimension
312"
B Dimension C Dimension
414"
(89mm)
(108mm)
Prefix-(W)VT-12
Prefix-(W)VT-12
2712"
2814"
(699mm)
(718mm)
1512"
1614"
(394mm)
(413mm)
1334"
1418"
(349mm)
(359mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)VT-12
Prefix-(W)VT-12
2914"
3014"
(743mm)
(768mm)
1714"
1814"
(438mm)
(464mm)
1458"
1518"
(371mm)
(384mm)
312"
414"
(89mm)
(108mm)
Prefix-(W)VT-24
Prefix-(W)VT-24
5112"
5214"
(1308mm)
(1327mm)
2712"
2814"
(699mm)
(718mm)
2534"
2618"
(654mm)
(664mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)VT-24
Prefix-(W)VT-24
5314"
5414"
(1353mm)
(1378mm)
2914"
3014"
(743mm)
(768mm)
2658"
2718"
(676mm)
(689mm)
312"
414"
(89mm)
(108mm)
Prefix-(W)VT-36
Prefix-(W)VT-36
7512"
7614"
(1918mm)
(1937mm)
3912"
4014"
(1003mm)
(1022mm)
3734"
3818"
(959mm)
(968mm)
514"
614"
(133mm)
(159mm)
Prefix-(W)VT-36
Prefix-(W)VT-36
7714"
7814"
(1962mm)
(1988mm)
4114"
4214"
(1048mm)
(1073mm)
3858"
3918"
(981mm)
(994mm)
12 for 12" w
COPE Trof
Radius - R
Example: 234-12VT-12-V
18 for 18" w
24 for 24" w
30 for 30" w
36 for 36" w
5-2 7
COPETROF
TRAY CONNECTORS
Catalog Number & Finishes
Catalog Number
Load Depth
3
4
5
6
EXPANSION CONNECTOR
Part No. CE (Sold in pairs)
(2) 716" x 112" SLOTS
Finish
6 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304SS)
Basic Number
-02RC
-02CE
-02CV
-02CH
-02CA
Example: 34 -02RC for 3" load depth, aluminum, universal
curvilinear connector.
Part Nos. CE, CH, and CV to be bonded if used as equipment
grounding conductor.
NOTE: Hole patterns match corresponding tray.
3-hole pattern illustrated.
Heavy Duty, Mid Span Splice Plates available upon request.
D
D
6"
6"
90 ANGLE CONNECTOR
Part No. CA (Sold in pairs)
734"
3"
3"
REDUCING CONNECTOR
Part No. CO (Not sold in pairs)
Catalog Number
Load Depth
3"
4"
5"
6"
L.H. OFFSET
REDUCTION
STRAIGHT
REDUCTION
5-2 8
R.H. OFFSET
REDUCTION
Finish
Basic Number A Dimension
2 (Mill Galv.)
-30CO
30" (762mm)
3 (HDGAF)
-27CO
27" (686mm)
4 (Alum.)
-24CO
24" (610mm)
U (304SS)
-21CO
21" (533mm)
-18CO
18" (457mm)
-15CO
15" (381mm)
-13CO
1312" (343mm)
-12CO
12" (305mm)
-10CO
1012" (267mm)
-09CO
9" (229mm)
-07CO
712" (191mm)
-06CO
6" (152mm)
-04CO
412" (114mm)
-03CO
3"
(76mm)
-01CO
112" (38mm)
Example: 34-03CO for 3" load depth, aluminum,
3" Reducer Connector.
Typical Use: 9" to 6", or use 2 for 12" to 6", etc.
COPE TROF
Hardware
COPETROF
MATERIAL/FINISH
Electrogalvanized finish standard. Other finishes available; consult factory. *Use following
suffix when applicable - use only where indicated.
No Suffix ..... Electrogalvanized carbon steel only
-HG ............. Hot-dip Galvanized (Except Threaded Rod)
-SS .............. 302/304 Stainless Steel
-S1 .............. 316 Stainless Steel (check factory for availability)
Example: 5112-2-HG, 38 x 112 hex head bolt, hot-dip galvanized
CONNECTOR HARDWARE
(Case-hardened steel electrogalvanized)
SQUARE NUTS
Cat. No.
5002-0-*
5002-1-*
5002-2-*
5002-3-*
5002-4-*
Size
14"
38"
12"
58"
34"
Cat. No.
5006-0-*
5006-1-*
5006-2-*
5006-3-*
5006-4-*
Size
14"
38"
12"
58"
34"
Cat. No.
5007-0-*
5007-1-*
5007-2-*
5007-3-*
5007-4-*
Size
14"
38"
12"
58"
34"
FLAT WASHERS
SPLIT-LOCK WASHERS
COVER SCREW
Part No. EM-CC (electrogalv. steel)
Part No. EM-CC-SS (stainless steel)
No. 10 x 58" long, self drilling-self tapping
hex head plated steel screw.
Suggested spacing:
Indoor: 8 per 12';
Outdoor: 10 per 12'
FENDER WASHERS
Cat. No.
5010-0-*
5010-1-*
5010-2-*
Size
14"
38"
12"
58"
34"
Cat. No.
5001-0-*
5001-1-*
5001-2-*
5001-3-*
5001-4-*
Size
14"
38"
12"
58"
34"
ROD COUPLER
Cat. No.
8195-0-*
8195-1-*
8195-2-*
8195-3-*
8195-4-*
Catalog No.
5100-0
HEX NUTS
Catalog No.
6100-0
Hex Head
Cap Screw
Cat. No.
5100-0-*
5112-0-*
5100-1-*
5112-1-*
5200-1-*
5100-2-*
5112-2-*
5200-2-*
5212-2-*
5300-2-*
5312-2-*
5112-3-*
5200-3-*
5300-3-*
5400-3-*
5200-4-*
5300-4-*
5400-4-*
Round Head
Cap Screw
Cat. No.
6100-0-*
6112-0-*
6100-1-*
6112-1-*
6200-1-*
6100-2-*
6112-2-*
6200-2-*
6212-2-*
6300-2-*
6312-2-*
6112-3-*
6200-3-*
6300-3-*
6400-3-*
6200-4-*
6300-4-*
6400-4-*
Size
(Dia. x Len.)
14" x 1"
14" x 112"
38" x 1"
38" x 112"
38" x 3"
12" x 1"
12" x 112"
12" x 2"
12" x 212"
12" x 3"
12" x 312"
58" x 112"
58" x 2"
58" x 3"
58" x 4"
34" x 2"
34" x 3"
34" x 4"
NOTE: Standard finish is electrogalvanized. Refer to finishes above for specifications of alternate finish or material.
5-2 9
COPE Trof
Cat. No.
Size (Diameter x Length)
14" x 10'
8193-0-10-*
38" x 10'
8193-1-10-*
12" x 10'
8193-2-10-*
58" x 10'
8193-3-10-*
34" x 10'
8193-4-10-*
(Hot Dip Galvanized not available.)
Covers
COPETROF
COVERS for straight sections shown. Standard fitting covers are flat solid type (NF). Aluminum covers are fabricated from 0.040"
aluminum AA-3150-H14; steel covers are fabricated from 20 gage ASTM A-653-G90 CQ, mill-galvanized steel.
FS Flat Solid
w/Flange
NF Flat Solid
PS Peaked Solid
(suffix height)
NL Flat Louvered
FL Louvered w/Flange
HS Hat (Solid)
HV Hat (Vent)
(suffix height)
HS, HV,
FL, FS,
NF, NL,
PS, PF,
PH, PV
Finish
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
Length
-06SL = 6"
-09SL = 9"
-12SL = 12"
-18SL = 18"
-24SL = 24"
-30SL = 30"
-36SL = 36"
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
Height*
-12' -2*
-06'
A
*peak and hat only, 2" height standard. Consult factory for other heights.
Example: NL2-09SL-12 is a flat louvered mill-galv. steel cover for a 9" wide mill galvanized Trof 12' long.
NF
FS
Load Depth
3
4
5
6
5-3 0
JOINT PLATE
Finish
Width/Basic No.
Radius
Tray Width
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
-06 XX**
-09 XX**
-12 XX**
-18 XX**
-24 XX**
-30 XX**
-36 XX**
12"
24"
36"
JP-06 = 6"
JP-09 = 9"
JP-12 = 12"
JP-18 = 18"
JP-24 = 24"
JP-30 = 30"
JP-36 = 36"
Flange Type
(152mm)
(229mm)
(305mm)
(457mm)
(610mm)
(762mm)
(914mm)
-2 = 1316" Flange
-4 = 114" Flange
-7 = 2" Flange
COPE TROF
Cover Accessories
COPETROF
SINGLE SIDE CONNECTOR
Part No. 01CC
Catalog Number
Finish
Basic No.
2 - Mill Galv. -01CC
3 - HDGAF
4 - Alum.
U - 304SS
COVER CONNECTOR
Part No. CC
Catalog Number
Catalog Number
Load Depth
3
4
5
6
Finish
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
Width Type
-06
DC
-09
-12
-18
-24
-30
-36
Example: 34-12DC for 3" load depth, 1316" flange,
aluminum, Double Clamp Connector.
Load Depth
3
4
5
6
Finish
Width
Type
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
-06
CC
-09
-12
-18
-24
-30
-36
Example: 34-12CC for 1316" flange, 3" load depth, aluminum,
12" wide connector.
COPE Trof
Catalog Number
Load Depth
3
4
5
6
Finish
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
Width
Type Raise (in)*
-06
PC
-2
-09
VC
-12
-18
-24
-30
-36
*2" standard raise. Consult factory for other peak heights.
Example: 34-12-VC-3 for 3" load depth, aluminum, 12" wide,
Peak Cover Connector (vented cover) with 2" peak.
Catalog Number
Flange
2 - 1316"
4 - 114"
7 - 2"
Finish
2 - Mill Galv.
3 - HDGAF
4 - Alum.
U - 304SS
Type
EC
Height*
- Raise* (in.)
5-3 1
Accessories
COPETROF
DROP OUT
Part No. DO
Cover
#10 x 58"
Self Drilling
Screw
Raise
Catalog Number
Basic Finish
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304SS)
Width
-06DO = 6" (152mm)
-09DO = 9" (229mm)
-12DO = 12" (305mm)
-18DO = 18" (457mm)
-24DO = 24" (610mm)
-30DO = 30" (762mm)
-36DO = 36" (914mm)
Example: 4-12DO for aluminum, 12" wide, Drop Out.
Tray Channel
Catalog Number
Finish
Type
Height*
2 - Mill Galv. EM-CC
- Raise* (in.)
3 - HDGAF
4 - Alum.
U - 304SS
*1", 2" or 3" standard.
Example: 3-EM-CC-2 for hot dipped
galvanized, outdoor, Elevated
Cover Connector with a 2" raise.
BONDING JUMPER
Part No. CBJ
BLIND END
Part No. BE
22 Gage Steel, .040" Aluminum
NOTE: 38"-16 spline bolts and
flange nuts furnished.
Catalog Number
Load Depth
3
4
5
6
Finish
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304SS)
Width
-06BE = 6" (152mm)
-09BE = 9" (229mm)
-12BE = 12" (305mm)
-18BE = 18" (457mm)
-24BE = 24" (610mm)
-30BE = 30" (762mm)
-36BE = 36" (914mm)
Example: 34-12BE for 3" load depth, aluminum, 12" wide
Blind End.
Catalog No.
CBJ-C
CBJ-4C
NOTE:
Dimensional Data
AWG 1/0 copper wire
1512" long overall
AWG 4/0 copper wire
1512" long overall
No hardware supplied
UL Listed E-24264
Certified File No. LR 9795
5-3 2
Catalog No.
9056-EP
9057-EP
9056-SS
9057-SS
Capacity
1/0 2/0 3/0
4/0 250 MCM
1/0 2/0 3/0
4/0 250 MCM
Dimensions
1" w x 2" long
1" w x 238" long
1" w x 2" long
1" w x 238" long
COPE TROF
Accessories
COPETROF
CONDUIT-TO-CABLE TRAY CLAMP
Catalog No.
TB6210
TB6212
Size
12"34"
1"-114"
Catalog No.
CCB-050
CCB-075
CCB-100
CCB-125
CCB-150
CCB-175
CCB-200
Std. Pkg.
50
20
Size Rigid
to12"
34"
1"
114"
112"
2"
38"
Size EMT
12"
34"
1"
114"
112"
2"
Catalog Number
Catalog No.
TB6209
TB6211
TB6214
TB6216
TB6218
Size
12"-34"
1"-114"
112"-2"
212"-3"
312"-4"
Std. Pkg.
10
10
5
5
2
Load Depth
3
4
5
6
Finish
2 - (Mill Galv.)
3 - (HDGAF)
4 - (Alum.)
U - (304SS)
Width
-06CB = 6" (152mm)
-09CB = 9" (229mm)
-12CB = 12" (305mm)
-18CB = 18" (457mm)
-24CB = 24" (610mm)
-30CB = 30" (762mm)
-36CB = 36" (914mm)
Example: 34-12CB for 3" load depth, aluminum, 12" wide,
Box Connector.
COPE Trof
W = Tray Width
*=Fitting 3-Digit Prefix
24"
Tray Width
Self-drilling, Self-tapping
Sheet Metal Screws
#EM-CC, (10) Included
Tray-to-Box Connector
(2) Included,
Hardware Included
Wall Thickness
Up to 1'
Solid Bottom
One Piece
Pan Type Tray
Connectors, One
Pair Included
5-3 3
Barrier Strips
COPETROF
BARRIER STRIPSTRAIGHT SECTION
Part No. SB
Catalog Number
Load Depth
Finish
3
2 (Mill Galv.)
-01SB-12
4
3 (HDGAF)
5
4 (Alum.)
6
U (304 SS)
Example: 34-01SB-12 for 3" load depth, aluminum straight barrier,
12' long.
Furnished with 8 self tapping screws.
412"
Catalog Number
Load Depth
Finish
3
2 (Mill Galv.)
-01FB-06
4
3 (HDGAF)
5
4 (Alum.)
6
U (304 SS)
Example: 34-01FB-06 for 3" load depth, aluminum fitting barrier,
6' long.
Furnished with 4 self tapping screws.
Catalog Number
Load
Depth
Finish
Bend
(deg.)
Basic No.
Radius
3
2 (Mill Galv.) 90
OB = Outside 12" (305mm)
4
3 (HDGAF)
60
IB = Inside
24" (610mm)
5
4 (Alum.)
45
36" (914mm)
6
U (304 SS)
30
Example: 34-90OB-12 for 3" load depth, aluminum 90 outside
vertical barrier with 12" radius.
COVER SCREW
Part No. EM-CC (electrogalv. steel)
Part No. EM-CC-SS (stainless steel)
No. 10 x 58" long, self drilling-self tapping hex head plated steel screw.
Suggested spacing: Indoor: 8 per 12'; Outdoor: 10 per 12'
5-3 4
COPE TROF
Accessories
COPETROF
HOLD-DOWN CLAMP & EXPANSION GUIDE
(For expansion guide clamp, add suffix EX to catalog number.)
Catalog Number
Load Depth
Basic Number
3
-9039 (Aluminum)
4
-9040 (Electrogalv. Steel)
5
6
Example: 3-9039-EX for 3" load depth, expansion guide.
Hardware purchased separately to suit support system.
Complete Kit add "-HDW" to Part Number Above
Hardware Kit List:
(2) Hold-Down Clamps
(2) 1/2" - 13 x 11/2" Cap Screw
(2) 1/2" Flat Washer
(2) Clamping Nut (Strut Nut)
Catalog Number
Load Depth
3
4
5
6
Finish
Basic Number
2 (Mill Galv.)
3 (HDGAF)
4 (Alum.)
U (304 SS)
-50172
COPE Trof
FASTENING BUCKLES
Part No. NFB (100 pcs.)
5-3 5
Support Brackets
COPETROF
GUSSET-TYPE SUPPORTS
For use with all types of Cope Ladder and Trough systems. Finish is mill-galvanized.
Order hardware separately.
1332"
12"
Catalog
No.
Ladder
Width
Dimension
B
9702-06
612"
412"
1
9702-09
6"
9 2"
412"
1
9702-12
9"
6"
12 2"
412"
9702-15
12"
9"
1512"
412"
9702-18
12"
1812"
6"
9702-24
18"
18"
2412"
6"
9702-30
24"
24"
3012"
6"
* Uniform load rating is normally twice the end load rating.
slots
Trough
Width
End-Load
Rating*
3"
3"
3"
3"
412"
412"
412"
450 lbs.
375 lbs.
300 lbs.
260 lbs.
225 lbs.
200 lbs.
175 lbs.
CHANNEL-TYPE SUPPORTS
For use with all types of Cope Ladder and Trough systems.
Finish is mill-galvanized. Order hardware separately.
2"
8"
2"
13
Standard Duty
Catalog
No.
Dimension
A
End-Load
Rating*
Catalog
No.
6 14"
Trough
Width
Ladder
Width
Dimension
A
End-Load
Rating*
9721-24
18"
18"
24"
9721-30
24"
24"
30"
9721-36
30"
30"
36"
9721-42
36"
36"
42"
* Uniform load rating is normally twice the end load rating.
Heavy Duty
8"
Catalog
Trof
Length
Dimensions
Number
Width
L
A
B
9037-12
6"
1214
10"
6"
11"
7"
9037-18
12"
1814"
9037-24
18"
2414"
11"
7"
12"
8"
9037-30
24"
3014"
12"
8"
9037-36
30"
3614"
9037-42
36"
4214"
12"
8"
*Uniform load rating is normally twice the end-load rating.
Finish is hot-dip galvanized after fabrication.
Order hardware separately.
350 lbs.
275 lbs.
230 lbs.
175 lbs.
5-3 6
Ladder
Width
9720-12
9"
6"
12"
9720-15
12"
9"
15"
9720-18
12"
18"
9720-24
18"
18"
24"
* Uniform load rating is normally twice the end load rating.
4 78"
16"
Trough
Width
480 lbs.
385 lbs.
320 lbs.
305 lbs.
C
2"
212"
212"
4"
4"
4"
End-Load
Rating*
2000 lbs.
2000 lbs.
1600 lbs.
1300 lbs.
1100 lbs.
900 lbs.
Catalog
Trof
Length
End-Load
Number
Width
L
Rating*
2000 lbs.
9036-31
24"
3114"
1800 lbs.
9036-37
30"
3714"
9036-45
36"
4514"
1500 lbs.
*Uniform load rating is normally twice the end-load rating.
For use with Cope Trof 24" or wider. May be welded or bolted to building steel.
Finish is hot-dip galvanized after fabrication.
Order hardware separately.
COPE TROF
COPETROF
VERTICAL SUPPORTS
Catalog Number
Cat. No.
9043-37
414" Overall Height Side Members
9043
514" Overall Height Side Members
9025-98
614" & 714" Overall Height Side Members
Tray Supports can be bolted anywhere along the straight
runs. They can be bolted directly onto the coupler plates at
splices of straight runs and riser fittings, or they can be
bolted at any place in the run by field-drilling side rails. Trof
supports are used with either 38" or 12" hanger rods. Finish
is eIectrogalvanized.
Rod Diameter
Rod Length
Beam Clamp
COPE Trof
Catalog Number
Assy. Type
Channel Length*
Channel Finish**
Rod Diameter
GV (Pre-Galv)
38=38" (9.53mm)
16" (407mm)
19" (483mm)
HG (Hot Dipped Galv)
12=12" (12.7mm)
22" (559mm)
28" (712mm)
34" (864mm)
40" (1017mm)
46" (1169mm)
Example: T200E-22-GV-12-036-B is a Single 22" pre-galvanized channel with 12" x 36" drop rod and P2622 clamp.
Note: *Order channel length 10" longer than tray width. For example, 46" channel for 36" tray.
** Other channel types and finishes available upon request. Contact factory.
T200E
T201E
Rod Length
Beam Clamp
000 No Rod
036 - 36" (914mm)
072 - 72" (1828mm)
120 - 120" (3048mm)
144 - 144" (3658mm)
A - Bridgeport
B - P2622
O - No Clamp
R - Rod Coupler
S - Special
5-3 7
Metal Framing
COPETROF
Allied Support Systems offers a complete line of metal framing channel and components. A sample is shown below.
Please contact factory for more information.
CHANNEL STYLES
CHANNEL SIZES
Brackets
Concrete
Inserts
Framing
Fittings
Trolleys
Electrical
Fittings
5-3 8
Pipe Rollers
Pipe Hangers
Pipe Clamps
Post Bases
Spring Nuts
COPE TROF
Rollers
COPETROF
Cope cable rollers are easily mounted and removed and are
applicable for small control cables as well as the largest armored
cables. All bearing wheels turn independently with a minimum of
friction. The freely running wheels are smooth surfaced and
closely spaced to prevent cable damage.
Tray Width
OR-1218
OR-1824
OR-2430
OR-3036
12 to 18" tray
18 to 24" tray
24 to 30" tray
30 to 36" tray
COPE Trof
5-3 9
COPETROF
Typical Specifications
All you need to add is inside depth, desired radius of fittings (to
protect from cable damage), metal and finish. You can add
accessory information pursuant to your project. Here is a typical
specification for an outdoor tray system where the working
(allowable) load has been determined to be approximately 75
pounds per foot on support spans of 12'-0".
2.
3.
4.
5.
6.
All top level trays in stacks and single runs to have raised
peaked aluminum ventilated covers with heavy duty hold
down clamps every 3'-0".
7.
8.
9.
5-4 0
COPE TROF
COPECHANNEL
6
Cable Tray for Branch Power Circuits,
Control, Signal & Tubing Systems.
Introduction
COPECHANNEL
COPE CHANNEL
Cope Channel supports single branches of power or multiconductor control cable or instrument tubing. Ideal for communication, fire alarm, or call station and clock cabling. A complete
line of devices are available for interfacing with Cope Ladders
and Cope Trofs. Compatible with any cable tray system. Cope
Channel is more economical than conduit.
Cope Channel is offered in both aluminum and steel, either hot
dip mill galvanized (ASTM A 525), or hot dip galvanized after
fabrication (ASTM A 386). Covers are available in aluminum
and mill galvanized steel. Connectors are furnished with all
straight sections and fittings. Other accessories must be ordered
separately.
Cope Channel is offered ventilated or solid. Basic units are 3",
4", or 6" wide and are 134" high. Standard lengths are 12'
(3.7m) and 24' (7.4m) long. A load chart is furnished to give you
guidance on how often you should support the system. Fitting
radii available are 12", 24", and 36". Cope Channel meets
NEMA VE-1 standards for cable tray.
Finish
Width
1124 - Alum.
6122 - Mill Galv.
6123 - HDGAF
3"
4"
6"
(76mm)
(102mm)
(152mm)
Length
Type
V - Vented
S - Solid
Fittings,
Accessories &
Connectors
Covers
1124
6122
6123
24
22
23
FS24
FS22
Aluminum
Mill-Galv. Steel
Hot-Dip Galv. Steel
Width
FS24 - Alum.
FS22 - Mill Galv.
3"
4"
6"
Length
(76mm)
(102mm)
(152mm)
Cope Channel
Basic No.
3"
4"
6"
(76mm)
(102mm)
(152mm)
Aluminum-Plain Finish
1124-03SL
1124-04SL
1124-06SL
.21" (5.3mm)
.34" (8.6mm)
.37" (9.4mm)
5
9
10
.33" (8.4mm)
.57" (14.5mm)
.61" (15.5mm)
3
6
6
.40" (10.6mm)
.79" (20.2mm)
.76" (19.3mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
5
9
10
.20" (5 1mm)
.35" (8.9mm)
.37" (94mm)
3
6
6
.25" (6.4mm)
.48" (12.2mm)
.46" (11.7mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
3
6
6
.25" (6.4mm)
.48" (12.2mm)
.46" (11.7mm)
8
13
15
6- 2
COPE CHANNEL
Fittings
COPECHANNEL
90 HORIZONTAL ELBOW
90
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
3"
4"
6"
Width - W
(76mm)
(102mm)
(152mm)
Catalog No.
Prefix-039F-12
Prefix-049F-12
Prefix-069F-12
15"
16"
18"
(381mm)
(406mm)
(457mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-039F-24
Prefix-049F-24
Prefix-069F-24
17"
28"
30"
(432mm)
(711mm)
(762mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-039F-36
Prefix-049F-36
Prefix-069F-36
39" (991mm)
40" (1016mm)
42" (1067mm)
22 = Mill-Galv. Steel
A Dim.
24 = Aluminum
60 HORIZONTAL ELBOW
D
B
R
60
Radius-R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
Width - W
Catalog No.
A Dim.
B Dim.
C Dim.
D Dim.
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-036F-12
Prefix-046F-12
Prefix-066F-12
1038"
1038"
1038"
(264mm)
(264mm)
(264mm)
9"
10"
12"
(229mm)
(254mm)
(305mm)
258"
312"
514"
(66mm)
(887mm)
(132mm)
712"
8"
9"
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-036F-24
Prefix-046F-24
Prefix-066F-24
2034"
2034"
2034"
(528mm)
(528mm)
(528mm)
15"
16"
18"
(381mm)
(406mm)
(457mm)
258"
312"
514"
( 66mm)
(88mm)
(132mm)
1312" (343mm)
14" (356mm)
15" (381mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-O66F-3S
Prefix-046F-36
Prefix-066F-36
3114"
3114"
3114"
(792mm)
(792mm)
(792mm)
21"
22"
24"
(533mm)
(559mm)
(610mm)
258"
312"
514"
(66mm)
(88mm)
(132mm)
1912" (495mm)
20" (508mm)
21" (553mm)
22 = Mill-Galv. Steel
(191mm)
(203mm)
(229mm)
24 = Aluminum
6-3
COPE Channel
Fittings
COPECHANNEL
45 HORIZONTAL ELBOW
D
45
Radius-R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
3"
4"
6"
Width - W
(76mm)
(102mm)
(152mm)
Catalog No.
Prefix-034F-12
Prefix-044F-12
Prefix-064F-12
812"
812"
812"
(216mm)
(216mm)
(216mm)
612"
712"
912"
(165mm)
(191mm)
(241mm)
218"
278"
414"
(54mm)
(71mm)
(108mm)
438"
434"
534"
(112mm)
(119mm)
(134mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-034F-24
Prefix-044F-24
Prefix-064F-24
1718"
1718"
1718"
(431mm)
(431mm)
(431mm)
1018"
1118"
1318"
(255mm)
(280mm)
(331mm)
218"
278"
414"
(54mm)
(71mm)
(108mm)
778"
814"
834"
(201mm)
(208mm)
(223mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-034F-36
Prefix-044F-36
Prefix-064F-36
2512"
2512"
2512"
(647mm)
(647mm)
(647mm)
1358"
1458"
1658"
(344mm)
(370mm)
(421mm)
218"
278"
414"
(54mm)
(71mm)
(108mm)
1112"
1134"
1238"
(291mm)
(298mm)
(313mm)
22 = Mill-Galv. Steel
A Dim.
B Dim.
C Dim.
D Dim.
24 = Aluminum
30 HORIZONTAL ELBOW
D
B
30
Radius-R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
6- 4
Width - W
Catalog No.
A Dim.
B Dim.
C Dim.
D Dim.
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-033F-12
Prefix-043F-12
Prefix-063F-12
6"
6"
6"
(152mm)
(152mm)
(152mm)
458"
558"
758"
(117mm)
(143mm)
(194mm)
112"
2"
3"
(38mm)
(51mm)
(76mm)
2"
218"
238"
(51mm)
(55mm)
(61mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-033F-24
Prefix-043F-24
Prefix-063F-24
12"
12"
12"
(305mm)
(305mm)
(305mm)
614"
714"
914"
(158mm)
(183mm)
(234mm)
112"
2"
3"
(38mm)
(51mm)
(76mm)
358"
334"
4"
(92mm)
(95mm)
(102mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-033F-36
Prefix-043F-36
Prefix-063F-36
18"
18"
18"
(457mm)
(457mm)
(457mm)
778" (198mm)
878" (224mm)
1078" (275mm)
112"
2"
3"
(38mm)
(51mm)
(76mm)
514"
538"
558"
(133mm)
(137mm)
(143mm)
22 = Mill-Galv. Steel
24 = Aluminum
COPE CHANNEL
Fittings
COPECHANNEL
90 VERTICAL INSIDE ELBOW
A
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
Catalog No.
A Dimension
3"
4"
6"
Width - W
(76mm)
(102mm)
(152mm)
Prefix-039I-12
Prefix-049I-12
Prefix-069I-12
12"
12"
12"
(305mm)
(305mm)
(305mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-039I-24
Prefix-049I-24
Prefix-069I-24
24"
24"
24"
(610mm)
(610mm)
(610mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-039I-36
Prefix-049I-36
Prefix-069I-36
36"
36"
36"
(914mm)
(914mm)
(914mm)
22 = Mill-Galv. Steel
24 = Aluminum
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
Catalog No.
A Dimension
3"
4"
6"
Width - W
(76mm)
(102mm)
(152mm)
Prefix-039O-12
Prefix-049O-12
Prefix-069O-12
1334"
1334"
1334"
(349mm)
(349mm)
(349mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-039O-24
Prefix-049O-24
Prefix-069O-24
2534"
2534"
2534"
(654mm)
(654mm)
(654mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-039O-36
Prefix-049O-36
Prefix-069O-36
3734"
3734"
3734"
(959mm)
(959mm)
(959mm)
22 = Mill-Galv. Steel
24 = Aluminum
6-5
COPE Channel
Fittings
COPECHANNEL
60 VERTICAL INSIDE ELBOW
60
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
Width - W
Catalog No.
A Dim.
B Dim.
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-036I-12
Prefix-046I-12
Prefix-064I-12
678"
678"
678"
(175mm)
(175mm)
(175mm)
1178"
1178"
1178"
(302mm)
(302mm)
(302mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-036I-24
Prefix-046I-24
Prefix-066I-24
1278"
1278"
1278"
(327mm)
(327mm)
(327mm)
2214"
2214"
2214"
(567mm)
(567mm)
(567mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-036I-36
Prefix-046I-36
Prefix-066I-36
1878"
1878"
1878"
(479mm)
(479mm)
(479mm)
3234"
3234"
3234"
(830mm)
(830mm)
(830mm)
22 = Mill-Galv. Steel
24 = Aluminum
A
60
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
6- 6
Width - W
Catalog No.
A Dim.
B Dim.
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-036O-12
Prefix-046O-12
Prefix-066O-12
6"
6"
6"
(152mm)
(152mm)
(152mm)
1038"
1038"
1038"
(264mm)
(264mm)
(264mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-036O-24
Prefix-046O-24
Prefix-066O-24
12"
12"
12"
(305mm)
(305mm)
(305mm)
2034"
2034"
2034"
(528mm)
(528mm)
(528mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-036O-36
Prefix-046O-36
Prefix-066O-36
18"
18"
18"
(457mm)
(457mm)
(457mm)
3114"
3114"
3114"
(792mm)
(792mm)
(792mm)
22 = Mill-Galv. Steel
24 = Aluminum
COPE CHANNEL
Fittings
COPECHANNEL
45 VERTICAL INSIDE ELBOW
45
A
B
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
Width - W
Catalog No.
A Dim.
B Dim.
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-034I-12
Prefix-044I-12
Prefix-064I-12
418"
418"
418"
(102mm)
(102mm)
(102mm)
934"
934"
934"
(247mm)
(247mm)
(247mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-034I-24
Prefix-044I-24
Prefix-064I-24
712"
712"
712"
(191mm)
(191mm)
(191mm)
1814"
1814"
1814"
(463mm)
(463mm)
(463mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-034I-36
Prefix-044I-36
Prefix-064I-36
1118" (281mm)
1118" (281mm)
1118" (281mm)
2634"
2634"
2634"
(678mm)
(678mm)
(678mm)
22 = Mill-Galv. Steel
24 = Aluminum
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
Width - W
Catalog No.
A Dim.
B Dim.
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-034O-12
Prefix-044O-12
Prefix-064O-12
312"
312"
312"
(89mm)
(89mm)
(89mm)
812"
812"
812"
(216mm)
(216mm)
(216mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-034O-24
Prefix-044O-24
Prefix-064O-24
718"
718"
718"
(179mm)
(179mm)
(179mm)
1718"
1718"
1718"
(431mm)
(431mm)
(431mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-034O-36
Prefix-044O-36
Prefix-064O-36
1012" (268mm)
1012" (268mm)
1012" (268mm)
2518"
2518"
2518"
(646mm)
(646mm)
(646mm)
22 = Mill-Galv. Steel
24 = Aluminum
6-7
COPE Channel
45
Fittings
COPECHANNEL
30 VERTICAL INSIDE ELBOW
30
A
B
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
Width - W
Catalog No.
A Dim.
B Dim.
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-033I-12
Prefix-043I-12
Prefix-063I-12
178"
178"
178"
(47mm)
(47mm)
(47mm)
678"
678"
678"
(175mm)
(175mm)
(175mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-033I-24
Prefix-043I-24
Prefix-063I-24
312"
312"
312"
(87mm)
(87mm)
(87mm)
1278"
1278"
1278"
(327mm)
(327mm)
(327mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-033I-36
Prefix-043I-36
Prefix-063I-36
518"
518"
518"
(129mm)
(129mm)
(129mm)
1878"
1878"
1878"
(479mm)
(479mm)
(479mm)
22 = Mill-Galv. Steel
24 = Aluminum
A
30
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
6- 8
Width - W
Catalog No.
A Dim.
B Dim.
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-033O-17
Prefix-043O-12
Prefix-063O-12
158"
158"
158"
(40mm)
(40mm)
(40mm)
6"
6"
6"
(152mm)
(152mm)
(152mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-033O-24
Prefix-043O-24
Prefix-063O-24
314"
314"
314"
(82mm)
(82mm)
(82mm)
12"
12"
12"
(305mm)
(305mm)
(305mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-033O-36
Prefix-043O-36
Prefix-063O-36
478"
478"
478"
(122mm)
(122mm)
(122mm)
18"
18"
18"
(457mm)
(457mm)
(457mm)
22 = Mill-Galv. Steel
24 = Aluminum
COPE CHANNEL
Fittings
COPECHANNEL
HORIZONTAL TEE
A
B
R
Radius - R
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
Width - W
Catalog No.
A Dim.
B Dim.
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-03FT-12
Prefix-04FT-12
Prefix-06FT-12
27"
28"
30"
(686mm)
(711mm)
(762mm)
15"
16"
18"
(381mm)
(406mm)
(457mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-03FT-24
Prefix-04FT-24
Prefix-06FT-24
51"
52"
54"
(1275mm)
(1321mm)
(1372mm)
27"
28"
30"
(686mm)
(711mm)
(762mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-03FT-36
Prefix-04FT-36
Prefix-06FT-36
75"
76"
78"
(1905mm)
(1930mm)
(1981mm)
39" (991mm)
40" (1016mm)
42" (1067mm)
22 = Mill-Galv. Steel
HORIZONTAL CROSS
24 = Aluminum
12"
(305mm)
24"
(610mm)
36"
(914mm)
Prefixes:
3"
4"
6"
Width - W
(76mm)
(102mm)
(152mm)
Catalog No.
Prefix-03FC-12
Prefix-04FC-12
Prefix-06FC-12
27"
28"
30"
(686mm)
(711mm)
(762mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-03FC-24
Prefix-04FC-24
Prefix-06FC-24
51"
52"
54"
(1295mm)
(1321mm)
(1372mm)
3"
4"
6"
(76mm)
(102mm)
(152mm)
Prefix-03FC-36
Prefix-04FC-36
Prefix-06FC-36
75"
76"
78"
(1905mm)
(1930mm)
(1981mm)
22 = Mill-Galv. Steel
A Dim.
24 = Aluminum
6-9
COPE Channel
Radius - R
Accessories
COPECHANNEL
BLIND END
END DROPOUT
W
Catalog Number
3" (76mm)
Prefix-03BE
4" (102mm)
Prefix-04BE
6" (152mm)
Prefix-06BE
Steel Plated, Furnished with one set
14" x 34" bolt, nut and washer.
Catalog Number
3" (76mm)
Prefix-03D0
4" (102mm)
Prefix-04D0
6" (152mm)
Prefix-06D0
Prefixes: 22 = Mill-Galv. Steel,
23 = Hot-Dip Galv. Steel,
24 = Aluminum
Steel plated, Furnished with one set
14" x 34" bolt, nut and washer.
134"
STANDARD CONNECTOR
Catalog Number
Prefix-03CS
Prefix-04CS
Prefix-06CS
Prefixes: 22 = Mill-Galv. Steel,
23 = Hot-Dip Galv. Steel,
24 = Aluminum
Hardware: 38" x 34" Bolt and flanged nut
Steel plated incl. (4-sets)
Catalog Number
Prefix-03CB
Prefix-04CB
Prefix-06CB
Prefixes: 22 = Mill-Galv. Steel,
23 = Hot-Dip Galv. Steel,
24 = Aluminum
Furnished with two sets 38" x 34" bolt,
nut and washer
Steel plated.
3" (76mm)
4" (102mm)
6" (152mm)
3" (76mm)
4" (102mm)
6" (152mm)
EXPANSION CONNECTOR
W
Catalog Number
Prefix-03CE
Prefix-04CE
Prefix-06CE
Prefixes: 22 = Mill-Galv. Steel,
23 = Hot-Dip Galv. Steel,
24 = Aluminum
Hardware: 38" x 34" Bolt and flanged nut
Steel plated incl. (4-sets)
3" (76mm)
4" (102mm)
6" (152mm)
Catalog No.
3" (76mm)
4" (102mm)
6" (152mm)
712" (191mm)
812" (216mm)
1012" (267mm)
Prefix-03CH
Prefix-04CH
Prefix-06CH
6- 1 0
COPE CHANNEL
COPECHANNEL
ADJUSTABLE RISER CONNECTOR
Accessories, Interconnections
COVER CONNECTOR
W
Catalog Number
Prefix-03CC
3" (76mm)
Prefix-04CC
4" (102mm)
6" (152mm)
Prefix-06CC
Prefixes: 22 = Mill-Galv. Steel,
23 = Hot-Dip Galv. Steel,
24 = Aluminum
Hardware: 14" x 214" Machine screw
and wing nut
Steel plated incl. (2-sets)
W
Catalog Number
3" (76mm)
Prefix-03CV
Prefix-04CV
4" (102mm)
6" (152mm)
Prefix-06CV
Prefixes: 22 = Mill-Galv. Steel,
23 = Hot-Dip Galv. Steel,
24 = Aluminum
Hardware: 38" x 34" Bolt and flanged nut
Steel plated incl. (4-sets)
INTERCONNECTIONS
CHANNEL HANGERS
COPE Channel
For 3"-, 4"- or 6"- wide Cope Channel raceways. Pipe sleeve accommodates either 3/8" or 1/2" diameter rods.
Finish is hot-dip galvanized after fabrication. Order hardware separately.
Catalog No.
Use With
Catalog No.
Use With
Dimension A
9013
9013-1
9014
9014-1
5"
7"
6-1 1
Table of Conversions
To Convert
From
Millimeter [mm]
Meter [m]
Meter [m]
Kilometer [km]
25.400 000
0.304 800
0.914 400
1.609 347
Millimeter [mm]
Meter [m]
Meter [m]
Kilometer [km]
Inch [in]
Foot [ft]
Yard [yd]
Mile (U.S. Statute) [mi]
0.039 370
3.280 840
1.093 613
0.621 370
645.16
0.092 903
0.836 127
0.001550
10.763 915
1.195 991
2.589 998
0.386 101
4046.873
0.404 687
0.000 247
2.471 046
16387.06
0.028 317
0.764 555
0.000061
35.314 662
1.307 950
Litre [l]
Litre [l]
3.785 412
0.946 353
Litre [l]
Litre [l]
0.264 172
1.056 688
Gram [g]
Kilogram [kg]
Kilogram [kg]
28.349 520
0.453 592
907.185
Gram [g]
Kilogram [kg]
Kilogram [kg]
0.035 274
2.204 624
0.00110
Newton [N]
Newton [N]
0.278 014
4.448 222
Newton [N]
Newton [N]
Ounce-Force
Pound-Force [lbf]
3.596 941
0.224 809
Netwon-Meter [N-m]
Newton-Meter [N-m]
0.112 985
1.355 818
Netwon-Meter [N-m]
Newton-Meter [N-m]
Pound-Force-Inch [lbf-in]
Pound-Force-Foot [lbf-ft]
8.850 732
0.737 562
Kilopascal [kPa]
6.894 757
Kilopascal [kPa]
0.145 038
Kilopascal [kPa]
Kilopascal [kPa]
2.988 980
3.386 380
Kilopascal [kPa]
Kilopascal [kPa]
Pound-Force per
Square Inch [lbf/in2]
Foot of Water (39.2 F)
Inch of Mercury (32 F)
0.334 562
0.295 301
Foot-Pound-Force [ft-lbf]
British Thermal Unit [Btu]
Joule [J]
Joule [J]
1.355 818
1055.056
Joule [J]
Joule [J]
Foot-Pound-Force [ft-lbf]
British Thermal Unit [Btu]
0.737 562
0.000948
Calorie [cal]
Kilowatt Hour [kW-h]
Joule [J]
Joule [J]
4.186 800
3600000
Joule [J]
Joule [J]
Calorie [cal]
Kilowatt Hour [kW-h]
0.238 846
2.78-7
Watt [W]
1.355 818
Watt [W]
0.737 562
Watt [W]
0.293 071
Watt [W]
Kilowatt [kW]
0.745 700
Kilowatt [kW]
Foot-Pound-Force
/Second [ft-lbs/s]
British Thermal Unit
/Hour [Btu/h]
Horsepower
(550 Ft. Lbf/s) [hp]
Radian [rad]
0.017 453
Radian [rad]
Degree
57.295 788
(F -32)/1.8
1.8xC+32
To
To
Multiply
By
Length
Inch [in]
Foot [ft]
Yard [yd]
Mile (U.S. Statute) [mi]
Area
Volume
Mass
Ounce (Avoirdupois) [oz]
Pound (Avoirdupois) [lb]
Short Ton
Force
Ounce-Force
Pound-Force [lbf]
Bending Moment
Pound-Force-Inch [lbf-in]
Pound-Force-Foot [lbf-ft]
Pressure, Stress
Pound-Force per
Square Inch [lbf/in2]
Foot of Water (39.2 F)
Inch of Mercury (32 F)
Power
Foot-Pound-Force
/Second [ft-lbs/s]
British Thermal Unit
/Hour [Btu/h]
Horsepower
(550 Ft. Lbf/s) [hp]
3.412 142
1.341 022
Angle
Degree
Temperature
Degree Fahrenheit [F]
0.015625
0.03125
0.046875
0.0625
0.078125
0.09375
0.109375
0.125
0.140625
0.15625
0.171875
0.1875
0.203125
0.21875
0.234375
0.25
0.265625
0.28125
0.296875
0.3125
0.328125
0.34375
0.359375
0.375
0.390625
0.40625
0.421875
0.4375
0.453125
0.46875
0.484375
0.5
0.515625
0.53125
0.546875
0.5625
0.578125
0.59375
0.609375
0.625
0.640625
0.65625
0.671875
0.6875
0.703125
0.71875
0.734375
0.75
0.765625
0.78125
0.796875
0.8125
0.828125
0.84375
0.859375
0.875
0.890625
0.90625
0.921875
0.9375
0.953125
0.96875
0.984375
1.
COPE Q U O TAT I O N C H E C K L I S T
T.J. Cope, Inc.
11500 Norcom Road Philadelphia, PA 19154
Phone: 800-688-4857 Fax: 215-961-2580
DATE: ______________________
LOCATION: _________________________________________________________
TRAY TYPE
_____
_____
_____
_____
_____
_____
_____
TRAY MATERIAL
_____ Aluminum
_____ Steel, Pre-Galvanized
_____
_____
_____
_____
_____
STRUCTURAL
REQUIRMENTS
Steel, HDGAF
304 Stainless Steel
316 Stainless Steel
Fiberglass
Other
NEMA CLASS
8A
8B
8C
OR
*RUNG SPACING
_____ 6"
_____ 9"
_____ 12"
_____ 18"
Cope Ladder*
Cope Hat*
Cope Ventilated Trough
Cope Solid Trough
Cope Channel
Cope Centipede*
Cope CatTray
12A
12B
12C
16A
16B
16C
20A
20B
20C
LOAD DEPTH
_____
_____
_____
_____
SPECIAL
REQUIREMENTS
________________________________________________________________________
3"
4"
5"
6"
FITTING RADIUS
_____ 12"
_____ 24"
_____ 36"
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
DELIVERY
REQUIREMENTS
________________________________________________________________________
________________________________________________________________________
www.tjcope.com
www.atcelectrical.com
T. J. Cope Corporation Printed in USA 5/2002 TJC-L-2000-1