Académique Documents
Professionnel Documents
Culture Documents
RoofBoots
Flexible base forms seal with most panels
Customizable, flexible sleeves that form a seal around pipes on all roofing surfaces
EPDM or Silicone sleeve accommodates expansion/contraction Lots of sizes and color choices 20-year warranty 35-year warranty available
20 yEar
waRRanty
RoofBoots are made with clearly marked sleeves which can be cut on-site to easily customize and precisely fit the pipe diameter you need. The sleeves come in EPDM 500 and Siliconedesigned for the maximum resistance to weathering due to ozone and ultraviolet light. The base on RoofBoots is flexible and designed to form a seal on all types of roofing surfaces (including metal, plastic, tile,
and more), and on almost any panel configuration and roof pitch, regardless of the pipe location. So installation is simple: choose the pipe opening and trim the sleeve, slide the boot over the pipe, form to the roof profile, apply sealant, and fasten to complete the installation. You can also choose from round or square base, from Marcos full selection of wraparound retrofit and solar boots, many sizes, and several color choices.
Step-by-step installation
Apply sealant
Slide the boot over the pipe and form to the roof profile
Fasten to roof
Installation complete
9 sizes / 10 colors
Bright Red
[See chart on following page for specific size information and availability]
2.77" - 75.25"
Gray
Light Blue
Terra Cotta
Black
White
[See chart on following page for specific size information and availability]
Light Green
Brown
silicone RoofBoots engineeRing Astm d2000 m4 Ge 505 A19 b37 c12 f19 G11 z1 z2 z3 z4 gRade 4 type G cLAss e 5 05 A19 General tes temp 225c Volume swell max 80% 50 durometer (range) tensile 5 mpa (minimum 725 psi) Heat Aging 70 hrs @ 225c change in Hardness max +10 pts change in tensile max -30% change in ultimate elongation max -30% compression set 22 hrs @ 175c max 50% Astm d395b Ozone Resistance 70 hrs @ 50pphm Astm d1171 Low temperature brittleness 3 min @ -55c pass Astm d2137 A, 9, 3, 2 tear Resistance, Astm d-624, die b 55 durometer (specific target) silicone (specific elastomer) Horizontal flame Resistance, uL 94 not to exceed 3"/min Ozone Resistance Advanced Requirement 70 hrs @ 500pphm @ 100 f
Specification Data
ADVANCED OZONE RESISTANCE tested HIGH TEMPERATURE RESISTANCE Tested to: intermittent Tested to: continuous Solar: Tested to: intermittent Solar: Tested to: continuous LOW TEMPERATURE RESISTANCE tested Solar Low Temp TENSILE SET maximum COMPRESSION SET maximum EPDM 500 70 hours @ 500 pphm +100C (+275F) +225C (+437F) +135C (+275F) +100C (+212F) -55C (-65F) -50C (-67F) 10 MPa (1450 psi) 25% SILICONE 70 hours @ 500 pphm +135C (+275F) +260C (+500F) +260C (+500F) +225C (+437F) -74C (-100F) -74C (-101F) 5 MP1 (700 psi) 50%
Complete specification data and testing methods are available upon request.
Sizing Chart
Check diameter of pipe. Select the appropriate RoofBooTS product for pipe or duct diameter. For extreme pitch or surface irregularity select next larger size. Choose the compound required, then refer to the part number for the RoofBooTS product desired.
pipe Range #1 #2 #3 #4 #5 #6 #7 #8 #9 1/4"2 1/2" (6.3563.5) 1 3/4"3" (44.576.2 mm) 1/4"5" (6.35127 mm) 3"6 1/4" (76.2158.8 mm) 4 1/47 3/4" (108196.9 mm) 5"9" (127228.6 mm) 6"11" (152.4279.4 mm) 7"13" (177.8330.2 mm) 9"19" (228.6482.6 mm)
compound Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone
paRt # RD101BE RD101GG RD101RG RD201BE RD201GG RD202RG RD301BE RD301GG RD302RG RD401BE RD401GG RD402RG RD501BE RD501GG RD502RG RD601BE RD601GG RD602RG RD701BE RD701GG RD702RG RD801BE RD801GG RD802RG RD901BE RD901GG RD902RG
flashing details A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter A Top opening diameter B Overall height C Base diameter Closed 2.77" (70.4 mm) 4.75" (120.7mm) 1.44" (36.6 mm) 3.35" (89.7 mm) 6.21" (157.7 mm) Closed 3.64" (92.5 mm) 7.74" (196.6 mm) 2.38" (60.5 mm) 5.05" (128.3 mm) 9.26" (235.2 mm) 3.50" (88.9 mm) 4.43" (112.5 mm) 10.75" (273.1.7 mm) 4.25" (108 mm) 5.60" (142.2 mm) 12.50" (317.5 mm) 4.90" (124.5 mm) 5.84" (148.3 mm) 14.60" (370.8 mm) 5.80" (147.3 mm) 7.53" (191.3 mm) 16.5" (419.1 mm) 7.45" (189.2 mm) 8.09" (205.5 mm) 75.25" (641.4 mm)
pipe Range Min. 1/8"3/4" (320 mm) #1 #2 #3 #4 #5 #6 #7 #8 #9 1/4"2" (650 mm) 1 1/4"3" (3276 mm) 1/4"4" (6102 mm) 3"6" (76152 mm) 4"7" (102178 mm) 5"9" (127228 mm) 6"11" (152280 mm) 7"13" (178330 mm) 10"18" (254467 mm)
compound Black EPDM Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone Black EPDM Grey EPDM Red Silicone
paRt # SQ051BA SQ101BA SQ101GA SQ101RA SQ201BA SQ201GA SQ202RA SQ301BA SQ301GA SQ302RA SQ401BA SQ401GA SQ402RA SQ501BA SQ501GA SQ502RA SQ601BA SQ601GA SQ602RA RD701BE RD701GG RD702RG SQ801BA SQ801GA SQ802RA SQ901BA SQ901GA SQ902RA SQ951BA SQ951GA SQ952RA
flashing details A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter A Top opening diameter B Cut to suit pipe size C Base diameter 1/16" 1/8"3/4" 2 1/4" Closed 1/4"2" 4 1/4" 7/8" 1 1/4"3" 6" Closed 1/44" 8" 2 1/2" 3"6" 10" 3 1/2" 4"7" 11" 4" 5"9" 12" 5" 6"11" 14" 6" 7"13" 17" 8 1/2" 10"18" 25" 11" 13"26" 34"
Steep Slope
Specifically designed for the metal roof industry, for applications with a 35 to 65 degree angle, while accepting and responding to the most commonly encountered pipe penetrations. The built in 40 pitch allow the Extreme Angle Master Flash to handle any extreme roof pitch, sleeve flexibility accommodates vibration and pipe movement caused by expansion and contraction. Easy on site customization handles all normal installations, too. Fast, one piece construction allows for easy on-site installation in usually 5 minutes. Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. The soft aluminum base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location. Steep Slopes flexible design meets virtually all roofing needs. Sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction. Steep Slope was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and mechanical Officials (for the uniform Plumbing Code) and remains the only product listed. These products are also listed for use with Type B vents. The addition of fire retarding agents milled directly into the rubber compound created a self extinguishing feature which enables it to be used with Type B vents. Listed with IAPMO certification No. 3121.
pipe Range 1/4" - 5 3/4" compound Black EPDM Red Silicone paRt # MFEA101BA MFEAS102RA flashing details A Top opening diameter B Cut to suit pipe size C Base diameter Closed 1/4" - 5 3/4" (6 - 146mm) 11" (279mm)
STEEP SLoPE
STEEP SLoPE
Multiport is specifically designed for Solar and Electrical Applications 5 Port Design - One Design, Multiple Functions Accommodates: One 0" - 1-15/16" - (0 - 49mm) Pipe Two 3/8" (0.9525mm) pipe / cable Two 3/4" (20mm) pipe / cable
pipe 0"-1 5/16" compound Black EPDM Red Silicone paRt # MFMP MFMPS
4-1/2 (114mm) Base Up to 4 cables or wires per flashing Extra ports accommodate copper pipe/electrical cabling Easy install for solar applications
flashing details A Top opening diameter B Overall height C Base diameter 0" - 1 5/16" (0 - 49mm) 2 1/2" (63.5mm) 4 1/2" (114mm)
SoLar / MULTIPorT
titebond Roof sealant is specifically formulated to outperform all other sealant technologies, including silicones, tri-polymers, and polyurethanes. this superior polymer formula provides a waterproof seal against water, wind, dust and dirt. It offers exceptional adhesion to Kynar coated metal surfaces, plastics and glass. the product is ideal for use on a wide variety of metal roof, trim, architectural metal siding, aluminum, galvanized steel, galvanized gutters, flashing and downspouts. It also provides unbeatable adhesion to wood, brass and other common building substrates.
Quikdrill metal-to-metal fasteners and QuikGrip metal-to-wood fasteners are the bedrock of the marco Weather-tite system. Quikdrill and QuikGrip offers you the right fastener for all pre-engineered metal building applications any job, any size, any conditions, any environment. both fastener families feature fasteners with a higher crown to allow a better, tighter socket fit, and cupped head and HWH for improved pullover strength. mechanical plating is standard with most fasteners, with stainless steel and zinc also available. No matter what your application or environment, theres a coating thats right for you. Whether its the matchtech painted coating or tripleGuard corrosion protection, marco has your fasteners covered from start to finish.
A trimmable joint and end lap sealing tape for metal roofing and wall jobs. Mastix is a high quality adhesive on a roll...the roll wont telescope from heat before installation, and Mastix really holds hot metals. Its made with a superior adhesive thats non-staining and permanently flexible. Use it to provide an excellent seal around windows, doors, roof vents, stacks, access doors, and other penetration points... wherever you need to seal metal to metal.
M-CLIPS
FLEx-o-vEnT LP2
Flexible Foam Ridge Vent as universal ridge vent Low Profile Vented Closure as ridge vent
x-SEaL
Expandable Foam tape
angLEkUT
rooF booTS
Pipe Flashing
TITEbonD SEaLanT
Durable & flexible
MaSTIx
Butyl tape
rE2
CLoSUrE FoaM
QUIkDrILL
Metal to metal fastener
SILL-rITE
Multi-use sill plate sealer provides a long-lasting seal
WEaThEr-TITE DoorS
Rolled Edge, Reliable Seal (5 models)
For nearly twenty years, Marco Industries has been delivering award-winning products to the metal building industry that offer easy installation, remarkable building ventilation, lower utility costs, extreme durability, and outstanding warranties...products that are economically and ecologically smart. Choose Marco for Everything you need to Make your Structure weather-tite.
RoofBoots represent yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.
MADE IN USA
Marco Industries Corporate: 9410 E. 54th Street | Tulsa, oK 74145 | 1.800.800.8590 | fax: 1.918.622.4536 041 Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | fax: 1.306.775.0072