Académique Documents
Professionnel Documents
Culture Documents
1. The Training report format available here is the Format of the Training
report to be submitted, neither of other format will be approved as completed, if not found strictly as in the given format.
2. The format content [ ] at many places where you need to replace
table has to be discussed thoroughly and interpreted. They are essential and they provide a basis and means to understand what you are trying to convey through the tables.
5. Add references for all the data used in the report. 6. The details of font and page and print to be used are as under:
Paper-A4, one side print only Title Font = Cambria, Bold Text Font= Cambria, Spacing =1.5 There should not be any change in the front page of the prescribed format. Only the desired information should be filled in, there should be no change in font or what so ever.
7. No. of copies = 3 (One for company, one for the Institute, one personal copy), however in case if company doesnt demand for their copy then only 2. 8. Consult with the guide for any type of doubt.
Size=14 Size=12
(i)
MERI COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF ECE ENGINEERING Asanda (Near Sampla), Bahadurgarh
IN PARTIAL FULLFILLMENT OF BACHELOR OF TECHNOLOGY In [ELECTRONICS AND COMMUNICATION ENGINEERING/ ELECTRICAL AND ELECTRONICS ENGINEERING]
(ii)
CERTIFICATE OF THE COMPANY To be given by the concerned authority in the organization where you have done your summer training (on the company letter head) and signed by the company project guide or the authority, Scan the original document and paste
(iii)
This is certified that [of the student. Roll Number, Branch & Year] has successfully completed the summer training for
(iv)
partial fulfillment of the requirement for the award of B.Tech Degree by the University.
This report is the record of authentic work carried out by the student during the academic year 2010-2011.
DECLARATION
I, [Name of the student. Roll Number, Branch & Year]hereby declare that this report is the record of authentic work carried out by me during the academic year 2010-2011 in __________________________________________________ (Name of the Company) _________________________________________________________________ (Address of the Company)
(v)
ACKNOWLEDGEMENT
(vi)
Abstract
(vii)
Index
(viii)
List of figures
(ix)
(x)
(xi)
Note: After these standard pages, the following pages will be containing the following chapters: Introductory chapter - Brief information of the organization (Location, Product/Services, Employee strength, Major customers, Major future plans, organizational Brief information of the work (Purpose, Scope)
CLOSING PAGES: 1.
2.
Bibliographie
(xiii)