Vous êtes sur la page 1sur 7

Manual of Petroleum Measurement Table of Contents

rev. 2-21-06
Subcommitte e COMET COLM COLM COLM COLM Chapter/Standard 1 2.2A 2.2B 2.2C 2.2D Title Vocabulary- This is not a balloted standard Measurement and Calibration of Upright Cylindrical Tanks by Manual Strapping Method Calibration of Upright Cylindrical Tanks using the Optical Reference Line Method ISO 7507-3 Tank Calibration by Optical Triangulation Method ISO 7507-4 Tank Calibration by Internal Electro-Optical DistanceRanging Method ISO 12917-1 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods ISO 12917-2 Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method Liquid Calibration of Tanks Calibration of Barge Tanks IP PMM, Part 1, Section 5B Calibration of Tanks on Ships and Oceangoing Barges Establishment of the Location of the Reference Gauge Point and the Gauge Height of Tanks on Marine Tank Vessels Manual Gauging of Petroleum and Petroleum Products Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging Tank Gauging-Gauging Petroleum and Petroleum Products in Tank Cars Level Measurement of Liquid Hydrocarbons in Stationary Pressurized Storage Tanks by Automatic Tank Gauging

COLM

2.2E

COLM COLM COLM COLM COLM COLM COLM COLM COLM

2.2F 2.2G 2.7 2.8A 2.8B 3.1A 3.1B 3.2 3.3

Subcommitte e COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COLM COGFM COLM COLM COLM

Chapter/Standard 3.4 3.5 3.6 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9.1 4.9.2 4.9.3 4.9.4 5.1 5.2 5.3 5.4 5.5 5.6 5.8 5.9 6.1 6.2

Title Standard Practice for Level Measurement of Liquid Hydrocarbons on Marine Vessels by Automatic Tank Gauging Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging Measurement of Liquid Hydrocarbons by Hybrid Tank Measuring Systems Introduction Displacement Provers Small Volume Provers Tank Provers Master Meter Provers Pulse Interpolation Field-Standard Test Measures Operation of Proving Meters Introduction to Determination of the Volume of Displacement and Tank Provers Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration Determination of the Volume of Displacement and Tank Provers by the Master Meter Method of Calibration Determination of the Volume of Displacement and Tank Provers by the Gravimetric Method of Calibration General Consideration for Measurement by Meters Measurement of Liquid Hydrocarbons by Displacement Meters Measurement of Liquid Hydrocarbons Turbine Meters Accessory Equipment for Liquid Meters Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems Measurement of Liquid Hydrocarbons by Coriolis Meters Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology Vortex Shedding Flowmeters for Custody Transfer Lease Automatic Custody Transfer (LACT) Systems Loading Rack Metering Systems

Subcommitte e COLM COLM COLM COLM COLM COMQ COMQ COMQ COMQ COMQ COMQ COMQ COMQ COMQ COMQ COMQ COMQ COMQ COMQ COMQ

Chapter/Standard 6.3 6.4 6.5 6.6 6.7 7 8.1 8.2 8.3 8.4 9.1 9.2 9.3 9.4 10.1 10.2 10.3 10.4 10.5 10.6

Title Service Station Metered Fuel-Dispensing Systems Metering Systems for Aviation Fueling Facilities Metering Systems for Loading Marine Bulk Carriers Pipeline Metering Systems Metering Viscous Hydrocarbons Temperature Determination ASTM D4057 Manual Sampling of Petroleum and Petroleum Products ASTM D4177 Automatic Sampling of Petroleum and Petroleum Products ASTM D5854 Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products ASTM D5842 Manual Sampling and Handling of Fuels for Volatility Measurement ASTM D1298 Standard Test Method for Density, Relative Density (Specific Gravity) or API Gravity of Crude Petroleum Products by Hydrometer Method ASTM D1657 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer ASTM D6822 Standard Test Method for Density and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method Continuous / On-line Density Measurement and Applications ASTM D473 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method ASTM D4006 Determination of Water in Crude Oil by Distillation ASTM D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) Determination of Sediment and Water in Crude Oil by the Centrifuge Method (Field Procedure) ASTM D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation ASTM D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

Subcommitte e COMQ COMQ COMQ COMQ COMQ COMQ COMQ COMQ COMQ COLM COLM COLM COLM COLM COLM COLM

Chapter/Standard 10.7 10.8 10.9 11.1 11.2.2 11.2.2M 11.3.2.1 11.3.2.2 11.4.1 12.1.1 12.1.2 12.2 12.2.1 12.2.2 12.2.3 12.2.4

Title ASTM D4377 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration ASTM D4807 Standard Test Method for Sediment in Crude Oil by Membrane Filtration ASTM D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60oF/60oF ) and 50oF to 140oF Metering Temperature Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Meter Density (15oC) 46oC to 60oC Metering Temperature Ethylene Density Propylene Compressibility Density of Water and Water Volume Correction Factors for Calibration of Volumetric Provers Calculation of Static Petroleum Quantities, Part I, Upright Cylindrical and Marine Vessels Calculation Procedures for Tank Cars Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volume Correction Factors Part 1 Introduction Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volume Correction Factors Part 2 Measurement Tickets Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volume Correction Factors Part 3 Proving Reports Calculation of Petroleum Quantities Using Dynamic Measurement Methods Part 4 Calculation of Base Prover Volumes by Waterdraw Method Calculation of Petroleum Quantities Using Dynamic Measurement Methods Part 5Calculation of Base Prover Volumes by Master Meter Method Calculation of Volumetric Shrinkage From Blending Light Hydrocarbons with Crude Oil

COLM COLM

12.2.5 12.3

Subcommitte e COLM COLM COGFM COGFM COGFM COGFM COGFM COGFM COGFM

Chapter/Standard 13.1 13.2 14.1 14.2 14.3.1 14.3.2 14.3.3 14.3.4 14.4

Title Statistical Concepts and Procedures in Measurement Methods of Evaluating Meter Proving Data Statistical Methods of Evaluating Meter Proving Data Collecting and Handling of Natural Gas Samples for Custody Transfer AGA 8/GPA 8185-90 Compressibility Factors of Natural Gas and other Related Hydrocarbon Gases AGA 3, Part 1 General Equations and Uncertainty Guidelines AGA 3 Part 2/GPA 8185 Part 2 Specification and Installation Requirements. AGA 3 Part 3/GPA 8185 Part 3/ ANSI-API 2530 Part 3 Natural Gas Applications AGA 3 Part 4/GPA 8185 Part 4 Background Development, Implementation Procedures and Subroutine Documentation GPA 8173-91 Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes GPA 2172-96 Calculation of Gross Heating Value, Specific Gravity and Compressibility of Natural Gas Mixture from Compositional Analysis Continuous Density Measurement GPA 8182-95 Mass Measurement of Natural Gas Liquids Liquefied Petroleum Gas Measurement AGA 11 Measurement of Natural Gas by Coriolis Meter Guideline for the use of the International System of Units (SI) in the Petroleum and Allied Industries. Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging Guidelines for Marine Cargo Inspection. Measurement of Cargoes On Board Tank Vessels Guidelines for identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements Method for Qualification of Small Volumes on Marine Vessels (OBQ/ROB) Guidelines for Cargo Analysis and Reconciliation

COGFM COMQ COGFM COGFM COGFM COGFM COMET COLM COMA COMA COMA COMA COMA

14.5 14.6 14.7 14.8 14.9 15 16.2 17.1 17.2 17.3 17.4 17.5

Subcommitte e COMA COMA COMA COMA COLM CELE CELE CELE CELE CELE CELE CELE CELE CELE CELE CELE CELE CELE COLM COGFM COGFM COLM COLM COGFM COLM

Chapter/Standard 17.6 17.7 17.8 17.9 18.1 19.1 19.1A 19.1D 19.2 19.3 Part A 19.3 Part B 19.3 Part C 19.3 Part D 19.3 Part E 19.3 Part F 19.3 Part G 19.3 Part H 19.4 20.1 21.1 21.2 21.2 Add A 22.2 (old 5.7)

Title Guidelines for Determining Fullness of Pipelines Between Vessels and Shore Tanks Recommended Practices for Developing Barge Control Factors (volume ratio) Marine Measurement- Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tank Vessel Experience Factors Measurement Procedures for Crude Oil Gathered From Small Tanks by Truck Evaporative Loss From Fixed Roof Tanks. Evaporative Loss From Low Pressure Tanks Documentation File for API MPMS Ch 19.1 Evaporative Loss from Fixed Roof Tanks Evaporative Loss From Floating Roof Tanks Wind Tunnel Test method Deck - Fitting Loss Factors for External Floating-Roof Tanks Air Concentration Test Method Rim Seal Loss Factors for Floating Roof Tanks Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks Fugitive Emission Test Method for Measurement of Deck-Seam Loss Factors for Internal Floating -Roof Tanks Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks Evaporative Loss Factor for Storage Tanks Certification Program Certified Loss Factor Testing Laboratory Registration Tank Seals and Fittings Certification Administration Recommended Practice for Speciation of Evaporative Losses Allocation Measurement of Oil and Natural Gas Electronic Gas Measurement Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters Flow Measurement Using Electronic Metering Systems, Inferred Mass Testing Protocols - Differential Pressure Flow Measuring Devices

Subcommitte e CELE CELE COLM COLM COLM COLM CELE COMA COLM CELE

Chapter/Standard Pub 2514A Pub 2524 Std Std Std RP Pub Pub Std 2552 2554 2555 2556 2558 2560 2566

Title Atmospheric Hydrocarbon Emissions from Marine Vessel Transfer Operations Impact Assessment of New Data on Validity of American Petroleum Institute Marine Transfer Operation Emission Factors Measurement and Calibration of Spheres and Spheroids Measurement and Calibration of Tank Cars Liquid Calibration of Tanks Correcting Gauge Tables for Incrustation Wind Tunnel Testing of External Floating-Roof Storage Tanks Recommended Practice: Reconciliation of Liquid Pipeline Quantities Multiphase Flowmeters Technical Report on Evaporative Loss from Storage Tank Floating Roof Landings

Pub 2567

Vous aimerez peut-être aussi