Académique Documents
Professionnel Documents
Culture Documents
Page 1 of 21
Specifications of
ADSS Accessories
SPEC No 20090609
Page 2 of 21
CONTENT
1. Tensions for ADSS/OPGW ..................................................................................................3 2. Suspensions for ADSS/OPGW .............................................................................................5 3 Spiral Vibration Damper ........................................................................................................7 4. Fastening Clamp ...................................................................................................................8 5. Down lead clamp ..................................................................................................................9 6. Joint Box and Splices..........................................................................................................10 7. Cable storage assembly....................................................................................................... 11 8. ODF ....................................................................................................................................12 9. 19 Network Cabinet ..........................................................................................................13 Appendix: Diagrammatic Drawing of Installation..................................................................18 A. Tensions Installation on the pole........................................................................................18 B Tension sets installation on the tower..................................................................................19 C. Suspensions Installation .....................................................................................................20 D. Joint Box and Margin Cable Storage Installation on the Pole............................................21 E. Joint Box and Margin Cable Storage Installation on the Tower .........................................21
SPEC No 20090609
Page 3 of 21
D ea d -en d C o m p o n en t
Description: Tension sets are intended for connecting ADSS cable with pole/tower. The armor rods not only can reduce the cable stress, avoid stress centralization, and deliver axial tension, but also distribute the stress equally throughout the high distance length of cable to protect ADSS cable surface and core from damage. According to different application, we can provide medium-and-large tension strength tension sets. Basic Configuration: (1) Inner armor rods, (2) Outer armor rods, (3) Clevis Thimble, (4) Extension link (5) Anchor shackle: U-7 Features: (1) Stress is distributed equally, without stress focus. It can protect optical cables very well. (2) Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force. (3) The grip power for the cable is not less than 95% of rating's pulling resisting intensity of the optical cable, completely satisfying the needs of setting up the cable. Application
All Rights Reserved Copyright@2009 Qingdao Powtech Electronics Co., Ltd
SPEC No 20090609
Page 4 of 21
(1) Terminal poles/towers; (2) Corner poles/towers; (3) Dead-end poles/towers; Technical data: Rated Tension Strength (RTS): 60kN Recommended span length: 600m
Product Model ANZ-600-12 .2 ANZ-600-13 .3 ANZ-600-14 .40 ANZ-600-15 .50 ANZ-600-16 .60 ANZ-600-17 .70 ANZ-600-18 .80 Cable Diameter mm 11.2-12.2 12.3-13.3 13.4-14.4 14.5-15.5 15.6-16.6 16.7-17.7 17.8-18.8 Inner Armor Rod (mm) 2200 2200 2200 2200 2200 2200 2200 Outer Armor Rod (mm) 1560 1560 1560 1560 1560 1560 1560 TC-04 TC-04 TC-04 TC-04 TC-04 TC-04 TC-04 LG-70 LG-70 LG-70 LG-70 LG-70 LG-70 LG-70 U-7 U-7 U-7 U-7 U-7 U-7 U-7 Clevis Thimble Extension Link Anchor Shackle
SPEC No 20090609
Page 5 of 21
A n c h o r S h a c k le A D S S C a b le
E y e C h a in L i n k (T y p e Z H )
U S tra p A G S C la m p
S tru c tu ra l R e in fo rc in g R o d s
O u te r R o d s
In se rt
Fig. Suspension sets Description: The suspension set for ADSS cable is specifically designed for the installation of cables on the pole/tower. The unilateral angle of the suspension will be 1518.This suspension is recommended as being superior to armor-clamp combinations, for protecting conductors from bending stress, compression stress and abrasion. The grip strength of the clamp is bigger than 10%-20% of the rated tensile strength. Basic Configuration: (1) Inner armor rods, (2) Outer armor rods, (1) Suspension clamp (rubber clamp piece, aluminum cover) (2) Anchor shackle: U-7 (3) Extension link Features: (1).Stress is distributed equally, without stress focus. It can improve the intensity of cable line installation point, and better protect the cable. (2).It has higher supporting capability of dynamic stress. The double-layer structure has better protection to the operating cable that has imbalanced load for long time. Its grip power can reach 10-20% of the pulling resisting intensity of the optical cable. (3).The greater interface with the optical cable and the gentle rubber clamp piece reduce the wearing out and improve self-damping. (4).The flat surface and the smooth shape of end improve the discharging voltage and
All Rights Reserved Copyright@2009 Qingdao Powtech Electronics Co., Ltd
SPEC No 20090609
Page 6 of 21
reduce the loss of electric power. (5).The superior aluminum alloy material has higher comprehensive mechanical performance and cauterization resisting capability, and extends the lifetime usage. (6).Easy installation; no need for special tools, no need for maintenance. Poles/ towers with corner angle of less than or equal to 25in straight lines. The angle of single-side suspensions is between15-18.
Technical Data: RTS: > 60kN Recommended span length :501~ 600m
Inner Armor Rod (mm) AXC-600-11.5 AXC-600-12.2 AXC-600-12.9 AXC-600-13.6 AXC-600-14.3 AXC-600-15.0 AXC-600-15.7 AXC-600-16.4 AXC-600-17.1 AXC-600-17.8 AXC-600-18.5 AXC-600-19.2 AXC-600-19.9 AXC-600-20.6 AXC-600-21.3 10.9-11.5 11.6-12.2 12.3-12.9 13.0-13.6 13.7-14.3 14.4-15.0 15.1-15.7 15.8-16.4 16.5-17.1 17.2-17.8 17.9-18.5 18.6-19.2 19.3-19.9 20.0-20.6 20.7-21.3 1920 1920 1920 1920 1920 1920 1920 1920 1920 1920 1920 1920 1920 1920 1920 Outer Armor Rod (mm) 1360 1360 1360 1360 1360 1360 1360 1360 1360 1360 1360 1360 1360 1360 1360 Anchor Shackle
Product Model
U-7 U-7 U-7 U-7 U-7 U-7 U-7 U-7 U-7 U-7 U-7 U-7 U-7 U-7 U-7
SPEC No 20090609
Page 7 of 21
Fig.3 Spiral vibration damper Description: Spiral vibration damper is made of high-strength, antigenic and high-elasticity PVC plastic, easy to install and operate. Its an interference type damper to attenuate vibration amplitude by impact with its damping section and especially designed for ADSS cable and OPGW cable of diameter less than 12mm. Material: High-elasticity PVC plastic nonmetallic Technical Data: Product Model FTL-11 FTL-14 FTL-16 Cable Diameter (mm) 8.3~11.7 11.71~14.30 14.31~19.30 Length of Clamp Section L1 (mm) 300 300 330 Total Length L (mm) 1400 1400 1500 Weight (kg) 0.36 0.42 0.50
SPEC No 20090609
Page 8 of 21
4. Fastening Clamp
Tension splint
Application:
To fasten the tension clamp and/or suspension clamp into pole/tower
Technical Data:
Model TGX 300 TGX 325 TGX 350 TGX 375 TGX 400 TGZ 80 TGZ 100 TGZ 125 TGJ 80 TGJ 100 TGJ 125 Fastening clamp for tower (straight splint) Fastening clamp for tower (tension splint) Fastening for pole clamp Name Suitable range 276~300mm 301~325mm 326~350mm 356~375mm 376~400mm Angle iron size80mm Angle iron size 100mm Angle iron size 125mm Angle iron size80mm Angle iron size 100mm Angle iron size 125mm Weight(kg) 4.2 4.4 4.6 4.9 5.1 3.1 3.4 3.7 2.8 3.1 3.5 RTS (kN) 70 70 70 70 70 70 70 70 70 70 70
SPEC No 20090609
Page 9 of 21
Components:
Ageing-resistant rubber, stainless steel strip, aluminum alloy base
Applications:
The Down-lead Clamp is used for fixing optical fiber when jumping and/or down leading. And it was commonly installed every 1.5 ~ 2 meter.
Technical Data:
Model TGY11.10 TGY13.30 TGY15.50 TGY18.00 TGY11.10-T TGY13.30-T Down lead clamp for tower Down Lead Clamp for Pole Product Name
Weight(kg)
0.9 1
Remark
0.95 0.95
For
ADSS
and
OPGW cable
SPEC No 20090609
Page 10 of 21
TGY15.50-T TGY18.00-T
13.4~15.5 15.6~18.0
0.95 0.95
Description: The products are designed to protect power special optical cable connections. It can be connected in ways of straight & branch. 5 cables should be installed in a splice closure. It's fit to be used at poles/ towers in overhead lines. Features: l Compact and lightweight l High mechanical strength and anti-corrosive l Good airtight and water proof l Eas y operation, expansion and maintenance l Repeat use l Maximum capacit y is up to 144 fiber Technical Data: Ports: 3 in/out ports Water resistance: Rubber buffer Curvature Semi diameter : 43mm Length of stacking rest: 1.5m Additional wastage: 0.01dB Maximum capacity:144 Cores Temperature range: -4080 Anti-side-pressure: 2000N
All Rights Reserved Copyright@2009 Qingdao Powtech Electronics Co., Ltd
SPEC No 20090609
Page 11 of 21
Fig. 6 Installation Schematic Drawing Application: Cable margin supporter: to store the margin cable to the pole and/or tower. Shall be used together with joint box. Technical Data: Model Dimension Lmm Weight(kg) Accessories Suitable Cable Range
SPEC No 20090609
Page 12 of 21 TJY 1000 1000 12 Include tower support The dia of OPGW cable less than 14.8mm
8. ODF
Used as the connection equipment of the fiber termination in the aerial optical cable engineering. It can store the connector of optical cable and its terminal cable and protect them from outside environment
Fig. 7 ODF
Technical data: Junction module qty and capacity: 1/24fiber Distributin module: Module connectors capacity: 24fiber Module quantity: 1pcs Connector type: SC/SC Polish of connector: SM Ultra polish
Connector insertion loss <0.15dB Connector discrete reflectance: 55dB Pigtail qty: 12pcs/1.5m Number of puttings to Adapter: 200times Operation temperature: -10 ~ 70 Material: Metallic Acess Type: Front side Dimensions Name Model
ODF OPX-12 OPX-24 OPX-36 OPX-48 OPX-72 485x285x45 485x285x45 485x305x90 485x305x90 485x305x135
Fiber capacity
12 24 36 48 72
Weight (kg)
6 6 10 10 10
Adapter type
SC-SC SC-SC SC-SC SC-SC SC-SC
Rack size
19/1U 19/1U 19/2U 19/2U 19/3U
SPEC No 20090609
Page 13 of 21
OPX-96 485x305x180 96 10 SC-SC 19/4U
9. 19 Network Cabinet
Standards: (1) Comply with ANSI/EIA; RS-310-D; DIN41491; IEC297-2; DIN41494; PART7; GB/T3047.2-92 standard; (2) Compatible with 19" international standard, metric system and ETSI standard Features: (1) Simple structure installation and operation (2) Adjustable feet and castors are available (3) Various optional accessories are available (4) Maximum static load of 300~800KG (5) Organic glass door (6) Optional cable entry on top cover and bottom panel (7) Optional opening hole and various specifications upon customers' special requirements. Specifications: (1) Surface treatment: degreasing, pickling, phosphoric, powder coated (2) Material: SPCC high-quality cold roll steel (3) Thickness: mounting profile 1.5~2.0mm, others 0.8~1.2 mm (4) Color: RAL9005 (Black) RAL7044 (Grey) Application: (1) For LAN construction, Modems, Industrial controlling, Lighting control, Monitor Equipments, etc
SPEC No 20090609
Page 14 of 21
JG-03
Ordering information:
Model JG-03 Type 19 cabinet (Luxury type) Sizes 1200 * 600 *600 1400 * 600 *600 1600 * 600 *600 1800 * 600 *600 2000 * 600 *600 1600*600*800 1800*600*800 2000*600*800 2000*800*800 2000*800*1000 * Color to be ordered Capacity 22U 27U 32U 37U 42U 32U 37U 42U 42U 42U
SPEC No 20090609
Page 15 of 21
Fig. Terminal Block with 8 outlet All Rights Reserved Copyright@2009 Qingdao Powtech Electronics Co., Ltd
SPEC No 20090609
Page 16 of 21
High-speed RS-232/RS-485/RS-422 Multimode and single mode fiber optical modem UT-277 Technical specifications: (1) Standard compliance: IEEE802.3U 10/100Base-TX, 100Base-Fx (2) Data transfer rate: Speed 100Mbps 10Mbps Forwarding Rate 148, 800pps 14,8 80pps
14 Patch cord
Parameter
SPEC No 20090609
Page 17 of 21
3 4 5 6 7 8 9
Insertion Loss Tension Strength Crush Resistance Strength Installation environment temperature Operation environment temperature Length Mating durability
0.3dB - Installation: 200N - Operation: 100N - Immediate: 500N - Regular: 100N 0 C ~ 60 C 0 C ~ 45 C 1.5m 100 times
SPEC No 20090609
Page 18 of 21
Armor rods
Clevis Thimble
Dead-End rods
Armor Rods
SPEC No 20090609
Page 19 of 21
OPGW
OPGW
OPGW
SPEC No 20090609
Page 20 of 21
C. Suspensions Installation
pole fastening clamp for pole Anchor Shackle Housing HSU rods
Rubber Insert
SPEC No 20090609
Page 21 of 21
Tension Set
Hoop
C-C
Tension Splint
Small Splint
Margin cable storage
Joint Box