Académique Documents
Professionnel Documents
Culture Documents
1. Upgrade mode
Item
*Product Name *Upgrade Modes *Upgrade Software Name HID S7 1USB Upgrade 2SD Card Upgrade
Description
UPDATA.APP version file unlmt.cfgSD update configuration file S70.xmlUSB update configuration file
*Version
Upgrade Compatibility
YES
2. USB Upgrade
2.1 Preparation before Upgrade
Project
*Preparation upgrade *Successful description upgrade before Install PC USB driver
Description
2011-1-25
1 , 9
2011-1-25
2 , 9
3) Upagrade tools
It has been saved in the following path: tools\s70_pc_suite\usb_upgrade. When entering USB upgrade mode and the driver is installed successfully on PC,you can use upgrade tool.The tool is HUAWEI Optional UMTS MultiDownload Software:
WH62406270ML01Ver 1002.exe
S70.xml
The USB driver can be downloaded from the website of Huaweidevice,the URL is: http://www.huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile &flay=software&fileName=35285&attachmentName=huawei%20s7_usbdriver.rar When the tool is used,please refer to the following steps: 1. Choose upgrade package(refer to foregoing chapters in order to make upgrade package) and configuration file(Please use s70.xml), as shown in the following picture:
2011-1-25 3 , 9
2011-1-25
4 , 9
4. SD Card Upgrade
SD card upgrade is operated by SD card to realize the function of upgrading the software version.
3.1
*Preparation upgrade
*Successful description
upgrade
2) Starting upgrade
There are two ways of starting upgrade: 1. Starting upgrade through screen interface: 2. Upgrade after manually restart:Insert SD card before starting the system,then start the system,in this process software will check the configuration file and upgrade package in SD card,then start the process of upgrade.
2011-1-25 5 , 9
3) Upgrade process
In the process of upgrade,LED indication light will shine slowly,about every 2 seconds.
4) Upgrade end
After upgrade is over,LED indication light and LCD screen will both show the upgrade result. If upgrade is successful,LED light will shine constantly,and upgrade schedule bar will show 100 percent. If upgrade fails,LED light will shine fleetly,about 3 times per second.
In the subdirectory of tools,there are tools software for package making process.In the subdirectory of S70,there are script file,input and output file for package making.
dsp1.mbn in Modem side and appsboot.mbn in APPS side to the directory of BINs,and cefs.mbn file to the directory of BINs; 2. Run the script in S70 directory: make_S70_modem_nonsec.cmd; 3. Copying UPDATA.APP and corresponding configuration file(unlmt.cfg and once.cfg) to the directory of dload in SD card.
2011-1-25 6 , 9
system.img to the directory of BINs. 5. Run the script in S70 directory: make_S70_all_nonsec.cmd. 6. Copying UPDATA.APP and corresponding configuration file(unlmt.cfg and once.cfg) to the directory of dload in SD card.
..\tools\bin2app -F -iBin BINs\boot.img addr0x30000000 secc ode0x48575538323230FF descinput -o boot_v.bin descHUAWEI_U8 220_CRC_BEIJING
6. Making CRC module and boothd.img module into a package together,creati ng a temporary file temp13.bin
..\tools\bin2app -F -iAPP crc_v.bin boothd_v.bin -o temp13. bin descHUAWEI_U8220_BEIJING
file temp14.bin
..\tools\bin2app -F -iAPP temp13.bin boot_v.bin -o temp14.bin descHUAWEI_U8220_BEIJING
8. Repeat the same operation as step 4 to 7,making system,userdata and recovery together,finally creating dload\UPDATA.APP.
..\tools\bin2app -F -iAPP temp19.bin dload/updata.app descHUAWEI_U8220_BEIJING recovery_v.bin -o
Possibly upgrade configuration file(once.cfgunlmt.cfg) are not in the directory of dload. c). Why upgrade fails? The reason of upgrade failure is caused by several aspects:Firstly,when problem occurs,please make sure UPDATA.APP is in the directory of dload.Secondly,make sure if the subarea of present software version is consistent with the version after upgrade.Thirdly,please check if the package-making script is improper.There are two instances that must pay special attention to: 1). If SD card is formatted in android system,upgrade procedure may not be able to read the file correctly,so youd better format the SD card in Windows system and copy upgrade package to SD card again. 2). When copying large files by using adb push command,maybe data error will occur and cause CRC checkout failure.Therefore,youd better copy files in Windows system.
If you have any questions,you can contact me:Wuzerun(ID:00159629),and you can dial the number:0755-36839280.Thanks.
2011-1-25
9 , 9