Académique Documents
Professionnel Documents
Culture Documents
assuredautomation.com
PTP Series
PVC 3-way Ball Valve
PTP Series valves can be used for flow diverting, mixing, or on/off isolation. They replace a Tee + 2 valve linkage assembly at reduced cost and space, along with shorter installation and maintenance time. The patented Dual Block system allows the valve to excel in working conditions where vibrations and thermal expansion may affect the performance of ordinary ball valves. The system incorporates a union nut locking device on all three ports, which prevents back-off during severe service conditions. An integral mounting flange and bracket allows for direct actuation and simple support, while a locking handle prevents improper positioning. The exclusive handle design can be equipped with an engineered block that locks the valve in open and closed positions, without increasing the overall valve dimension critical for small diameter, small space applications.
ACTUATOR CONFIGURATIONS
Electric. Pneumatic (spring return). Pneumatic (double acting). Manual handle lever.
MAXIMUM PRESSURE
232 PSI (at 73F)
TEMPERATURE RANGE
32F to 140F
MATERIALS OF CONSTRUCTION
Body: PVC. Seats: Teflon (PTFE). Seals: EPDM or Viton (FKM).
FEATURES
Patented seat stop carrier allows for in-line microadjustment of the ball seating, featuring o-ring cushioning to minimize wear and prevent seizing. Multifunctional handle provides compact design and precision jointing with the valve stem. Stem ball connection is fully machined after molding, giving very precise dimension tolerances. This provides reduced torque transmission and high mechanical resistance. Two O-rings assure perfect stem sealing. Red optical indicator at top of stem clearly shows the position of the ball ports. An integrated molded bracket for valve and pipeline mounting is standard. Integrated valve support and ISO actuator pads are available.
Valve Pressure / Temperature 250 200 Pressure (PSI) 150 100 50 Center Inlet 0 30 60 90 120 150 Center Inlet Side Inlet Side Inlet Any Inlet
SPECIFICATIONS
Connections: 1/2 to 2 NPT threaded or IPS socket. Standards: ASTM D1784, ASTM D2466, ASTM D2467, ASTM D2464, ASTM F1498 and ANSI B1.20.1.
PORT ARRANGEMENTS
T Port Flow Plan A Flow Plan B Flow Plan C Flow Plan D L Port Flow Plan E
CV FACTORS
Size 1/2 3/4 1 1-1/4 1-1/2 2 Cv (per Flow Plan) A 3.85 9.5 14.4 27.3 33.3 63 B 2.45 6.65 9.8 18.9 23.1 43.4 C 4.55 10.2 17.2 32.2 42 84 D 13.7 26.6 53.2 73.5 119 224 E 5.11 10.5 18.6 33.3 43.3 85.4
Temperature (F)
Contact us for the most recent product and technical information. Visit our website for more details: assuredautomation.com
1-800-899-0553
assuredautomation.com
PTP Series
PVC 3-way ball valve
(1/2 to 2 sizes available)
PARTS
1. Insert: U-PVC. 2. Handle: U-PVC. 3. Spring: Stainless steel. 4. Safety Handle Block: PP-GR. 5. Stem O-ring: EPDM-FKM. 6. Position Indicator: POM. 7. Stem: U-PVC. 8. Dual Block: POM. 9. Body: U-PVC. 10. Support O-ring for Ball Seat: EPDM-FKM. 11. Ball Seat: PTFE. 12. Ball: U-PVC. 13. Radial Seal O-ring: EPDM-FKM. 14. Support for Ball Seat: U-PVC. 15. Stop Ring: U-PVC. 16. Socket Seal O-ring: EPDM-FKM. 17. End Connector: U-PVC. 18. Union Nut: U-PVC.
8 11 11 13 9 10 12 15 16 10 7 6 5 5 4 3 2
14
18
17
Contact us for the most recent product and technical information. Visit our website for more details: assuredautomation.com
1-800-899-0553
assuredautomation.com
PTPM Series
Full port PVC ball valve
(NPT threaded or IPS socket end connections)
M M 3 M 3 M 3 M 3 M
Flow Pattern: A, D, E, F, G.
Contact us for the most recent product and technical information. Visit our website for more details: assuredautomation.com
1-800-899-0553
assuredautomation.com
PTPESR Series
Full port PVC ball valve with spring return pneumatic actuator
(NPT threaded or IPS socket end connections, actuators are sized for 150 PSI pressure differential)
B G
D H
E F
A/2
D 2.36 3.26 3.26 3.26 3.26 3.78 2.36 3.26 3.26 3.26 3.78 4.19
E 3.10 2.89 2.91 3.82 4.09 4.49 3.10 2.89 2.91 3.82 4.09 4.49
F 4.24 4.25 4.45 5.63 6.14 6.93 4.24 4.25 4.45 5.63 6.14 6.93
2
G .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79
H 1.06 1.46 1.46 1.46 1.46 1.70 1.06 1.46 1.46 1.46 1.70 1.93
I .84 1.05 1.32 1.66 1.90 2.38 .84 1.05 1.32 1.66 1.90 2.38
Actuator ES12 ES25 ES25 ES25 ES25 ES40 ES12 ES25 ES25 ES25 ES40 ES65
Wt. (lbs.) 3.5 4.9 5.5 6.5 7.4 11.5 3.5 4.9 5.5 6.5 9.0 14.1
Model No. CPTP 1 DPTP 1 EPTP 1 FPTP 1 GPTP 1 HPTP 1 CPTP 1 DPTP 1 EPTP 1 FPTP 1 GPTP 1 HPTP 1
2 3
E8S 4 E8S 4 3 E8S 4 3 E8S 4 3 E8S 4 3 E8S 4 E6S 4 E6S 4 3 E6S 4 3 E6S 4 3 E6S 4 3 E6S 4
End Connection: N = NPT; S = Glued Socket. 3 Flow Pattern: A, D, E, F, G. 4 Fail Position: 1, 2. Note: 1/2 size valve is assembled with fabricated mounting kit and not direct mount.
Contact us for the most recent product and technical information. Visit our website for more details: assuredautomation.com
1-800-899-0553
assuredautomation.com
PTPEDA Series
Full port PVC ball valve with double acting pneumatic actuator
(NPT threaded or IPS socket end connections, actuators are sized for 150 PSI pressure differential)
B G
D H
E F
A/2
F 3.42 4.25 4.45 5.63 6.14 6.93 3.42 4.25 4.45 5.63 6.14 6.93
G .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79
H 1.06 1.46 1.46 1.46 1.46 1.70 1.06 1.46 1.46 1.46 1.46 1.70
I .84 1.05 1.32 1.66 1.90 2.38 .84 1.05 1.32 1.66 1.90 2.38
Actuator ED12 ED25 ED25 ED25 ED25 ED40 ED12 ED25 ED25 ED25 ED25 ED40
Wt. (lbs.) 3.3 4.1 4.6 5.7 6.6 10.2 3.3 4.1 4.6 5.7 6.6 10.2
Model No. CPTP 1 DPTP 1 EPTP 1 FPTP 1 GPTP 1 HPTP 1 CPTP 1 DPTP 1 EPTP 1 FPTP 1 GPTP 1 HPTP 1
2 3
E8D E8D 3 E8D 3 E8D 3 E8D 3 E8D E6D E6D 3 E6D 3 E6D 3 E6D 3 E6D
Seal Material: E = EPDM; V = Viton. 2 End Connection: N = NPT; S = Glued Socket. 3 Flow Pattern: A, D, E, F, G. Note: 1/2 size valve is assembled with fabricated mounting kit and not direct mount.
Contact us for the most recent product and technical information. Visit our website for more details: assuredautomation.com
1-800-899-0553
assuredautomation.com
PTPOSR Series
Full port PVC ball valve with spring return pneumatic actuator
(NPT threaded or IPS socket end connections, actuators are sized for 150 PSI pressure differential)
B G
D H
C I F
A/2
D 2.56 2.56 2.56 2.56 2.56 2.83 2.56 2.56 2.56 2.56 2.56 2.83
E 2.28 2.89 2.91 3.82 4.09 4.49 2.28 2.89 2.91 3.82 4.09 4.49
F 3.42 4.25 4.45 5.63 6.14 6.93 3.42 4.25 4.45 5.63 6.14 6.93
2
G .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79
H 1.28 1.28 1.28 1.28 1.28 1.41 1.28 1.28 1.28 1.28 1.28 1.41
I .84 1.05 1.32 1.66 1.90 2.38 .84 1.05 1.32 1.66 1.90 2.38
3
Actuator PS030 PS030 PS030 PS030 PS030 PS045 PS030 PS030 PS030 PS030 PS030 PS045
Wt. (lbs.) 5.1 5.6 6.1 7.2 8.1 11.5 5.1 5.6 6.1 7.2 8.1 11.5
4
Model No. CPTP 1 DPTP 1 EPTP 1 FPTP 1 GPTP 1 HPTP 1 CPTP 1 DPTP 1 EPTP 1 FPTP 1 GPTP 1 HPTP 1
2 3
O8S 4 O8S 4 3 O8S 4 3 O8S 4 3 O8S 4 3 O8S 4 O6S 4 O6S 4 3 O6S 4 3 O6S 4 3 O6S 4 3 O6S 4
Flow Pattern: A, D, E, F, G.
Fail Position: 1, 2.
Optional actuator mounting block. Pressure range: 232 PSI (at 73F).
Contact us for the most recent product and technical information. Visit our website for more details: assuredautomation.com
1-800-899-0553
assuredautomation.com
PTPODA Series
Full port PVC ball valve with double acting pneumatic actuator
(NPT threaded or IPS socket end connections, actuators are sized for 150 PSI pressure differential)
B G
D H
C I F
A/2
F 3.42 4.25 4.45 5.63 6.14 6.93 3.42 4.25 4.45 5.63 6.14 6.93
G .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79
2
H 1.18 1.18 1.18 1.18 1.18 1.41 1.18 1.18 1.18 1.18 1.18 1.41
I .84 1.05 1.32 1.66 1.90 2.38 .84 1.05 1.32 1.66 1.90 2.38
Actuator PD045 PD045 PD045 PD045 PD045 PD090 PD045 PD045 PD045 PD045 PD045 PD090
Wt. (lbs.) 3.5 4.0 4.5 5.6 6.5 10.3 3.5 4.0 4.5 5.6 6.5 10.3
3
Model No. CPTP 1 DPTP 1 EPTP 1 FPTP 1 GPTP 1 HPTP 1 CPTP 1 DPTP 1 EPTP 1 FPTP 1 GPTP 1 HPTP 1
2 3
O8D O8D 3 O8D 3 O8D 3 O8D 3 O8D O6D O6D 3 O6D 3 O6D 3 O6D 3 O6D
Flow Pattern: A, D, E, F, G.
Optional actuator mounting block. Pressure range: 232 PSI (at 73F).
Contact us for the most recent product and technical information. Visit our website for more details: assuredautomation.com
1-800-899-0553
assuredautomation.com
PTPV4 Series
Full port PVC ball valve with electric actuator, NEMA 4, 4X
(NPT threaded or IPS socket end connections, actuators are sized for 150 PSI pressure differential)
B G
D H
E F
A/2
V4 4 V4 4 3 V4 4 3 V4 4 3 V4 4 3 V4 4
End Connection: N = NPT; S = Glued Socket. 3 Flow Pattern: A, D, E, F, G. Voltage: A = 120 VAC; B = 24 VDC; C = 220 VAC; E = 24 VAC; F = 12 VDC.
Contact us for the most recent product and technical information. Visit our website for more details: assuredautomation.com
1-800-899-0553
assuredautomation.com
B G
D H
E F
A/2
B7 B7 3 B7 3 B7
Seal Material: E = EPDM; V = Viton. 2 End Connection: N = NPT; S = Glued Socket. 3 Flow Pattern: A, D, E, F, G. Note: 3/4 to 1-1/4 size valves are assembled with fabricated mounting kit and not direct mount.
Contact us for the most recent product and technical information. Visit our website for more details: assuredautomation.com
1-800-899-0553
assuredautomation.com
B G
D H
A/2
F 6.14 6.93
G 3.75 3.75
2
H 3.88 3.88
I 1.90 2.38
B7 B7
Flow Pattern: A, D, E, F, G.
Optional actuator mounting block. Pressure range: 232 PSI (at 73F).
Contact us for the most recent product and technical information. Visit our website for more details: assuredautomation.com
10