Académique Documents
Professionnel Documents
Culture Documents
Automotive Formulas.
Automotive Formulas.
FORMULAS
2. – LOOSEN NUTS.
Note: The reader who wishes to package this or other spray products can
contact Spray Química, whose telephone numbers appear in the list of
suppliers.
You get a cream to remove grease and all types of dirt from your hands by
simply spreading and rubbing them, which can then be cleaned with a cloth,
leaving your hands clean. This product is widely used in mechanical workshops
due to its important industrial use and its ease of application. You can add
perfume and color if you wish.
FORMULA 1
FORMULA #2
PROCEDURE: Make both formulas separately and then pour one over the
other, stirring constantly until a homogeneous and smooth cream is formed.
Add perfume if you like.
7. – GLASS CLEANER.
A modern liquid is obtained that does not stain or opaque and has an excellent
cleaning effect, leaving the glass completely transparent and shiny. This
product must be applied using a spray bottle and then dried with a clean, dry
cloth.
Gasoline engines tend, with use and despite regularly changing the oil, to form
residues that stick to the engine block, therefore it is advisable to clean the
engine internally on a regular basis. With this formula, an oil is obtained that is
packaged in plastic gallons and when an oil change is performed, the used oil is
removed, this gallon of cleaning oil is made and the engine is run for
approximately 20 to 25 minutes. Then this is removed and the new oil is placed.
Note: If the Gum Arabic is not of excellent quantity, it will be difficult for it to
dissolve in the Ammonia, so you must first heat it in a bain-marie.
STEP 1
STEP 2
Note: About 200 Grms. are placed in each tire, so 1 Kg. It protects the four
tires, plus the spare one, preventing it from being emptied in the suitcase due to
lack of use.
An excellent paste is achieved for cleaning glass, which leaves them shiny,
transparent and immaculate for a long time. It must be applied, allowed to dry
and then removed with a dry cloth.
This lubricant is ideal for unlocking chains and padlocks, providing protection
against humidity and oxidation, allowing easy use, without noise or discomfort.
This formula allows you to obtain an excellent quality liquid with which you can
polish chrome, nickel, bronze, silver, gold, etc., and all kinds of metals where
you want to obtain cleanliness and shine. This product dissolves the rust
formed on the metal surface of objects, while slightly polishing them.
With this formula, a very effective liquid is obtained to remove the scale of rust
and dirt that is deposited in the car radiator and which is one of the causes of
overheating. This liquid must be added to the water in the radiator and wait one
hour with the engine running, while it performs its cleaning effect. After that
time, open the drain valve and wash it with plenty of water.
With this formula you obtain a product of excellent cleaning quality, not
improved on the market, with great foaming power, which facilitates the
emulsification of greasy products, significantly increasing its cleaning power.
This product removes easily without leaving stains on the paint of the car, as
well as leaving a shiny layer that enhances the paint color.
PRODUCT DESCRIPTION:
PRODUCT DESCRIPTION:
HIGH CONCENTRATION LIQUID DETERGENT, THAT CLEANS AND
DEGREASES EXTRACTION HOODS, GOLD, SILVER, PRECIOUS STONES,
CARPETS ETC.
DILUTION OF USE:
ONE PART OF THIS PRODUCT WITH 10-20-30 EQUAL PARTS OF WATER,
DEPENDING ON THE AMOUNT OF DIRT OR GREASE TO BE REMOVED.
FORMULATION:
FORMULATION %
1. SODIUM LAURYL ETHER SULFATE 7.0
2. SODIUM 7.0
ALKILBENZENSULPHANATE
3. BUTYLCELLUSOLVE 5.0
4. SODIUM TRIPOPOLYPHOSPHATE 3.0
5. NONYL PHENOL 10 MOLES 3.0
6. FORMOL 0.25
7 CBP WATER 100% 74.75
*CBP WATER 100% (Distilled or Biologically Pure Water)
PREPARATION METHOD:
A) HEAT HALF OF THE TOTAL WATER OF THE FORMULATION
WHERE WE WILL PERFECTLY DISSOLVE THE SODIUM
ALKILBENZENSULPHANATE.
B) IN ANOTHER CONTAINER, HEAT THE OTHER HALF OF
WATER TO 70°CA BOILING POINT, ADDING THE SODIUM
TRIPOLYPHOSPHATE, WHICH WE WILL COMPLETELY
DILUTE WITH VIGOROUS AGITATION.
C) WE PRECED TO MIX BOTH PHASES A) IN B) AND MIXING
PERFECTLY WHEN ADDING THE REST OF THE
INGREDIENTS IN THE ORDER OF THE FORMULATION WITH
VIGOROUS AGING.
D) LET REST AND PACK.
OPTIONAL; 1% PEARLISH
PRODUCT DESCRIPTION:
REMOVERS GEL GEL WITHOUT RISKS IN ITS HANDLING, LESS
AGGRESSIVE BUT EQUALLY EFFECTIVE PRODUCT, HIGH CATEGORY
PRODUCT FOR ITS DEGREASING AND SOLVING COMPONENTS OF GILTER
AND FATS, IF WE WANT A MORE AGGRESSIVE AND QUALITY PRODUCT,
REPLACE THE MONOETANOLAMINE IN THIS FORMULATION WITH
SODIUM HYDROXIDE AT 10-20%
FORMULATION:
FORMULATION %
1. CARBOXYMETHYL CELLULOSE 2.5
2. BUTYLCELLUSOLVE 1.0
3. MONOETHANOLAMINE* 10.0
4. NONYL PHENOL 10 MOLES 0.3
5. FORMOL 0.25
6. CBP WATER 100% 85.95
*CBP WATER 100% (Distilled or Biologically Pure Water)
PREPARATION METHOD:
A) IN AN AMOUNT OF WATER, DISSOLVE INGREDIENT 1 AT
LEAST 12 HOURS BEFORE USING.
B) IN THE REMAINING WATER OF THE FORMULATION,
DISSOLVE THE OTHER INGREDIENTS OF THE
FORMULATION ONE BY ONE WITH VIGOROUS AGITATION.
C) HAVING DISSOLVED THE PREVIOUS INGREDIENTS
PERFECTLY, ADD THEM TO THE MIXTURE IN SECTION A)
UNTIL THE DESIRED CONSISTENCY IS OBTAINED.
D) PACKAGE.
PRODUCT DESCRIPTION:
HIGHLY EFFICIENT PRODUCT IN CLEANING GLASS AND CRYSTALS OF
ALL TYPES WITH ANTI-FOGING AND DEGREASING ACTION, IDEAL FOR
TAXI DRIVERS.
FORMULATION:
FORMULATION %
1. SODIUM LAURYL SULFATE 1.5
2. AMMONIUM HYDROXIDE 1.0
3. FORMOL 0.25
4. ISOPROPYL ALCOHOL 3.0
5. BLUE COLORING css
6. CBP WATER 100% 94.25
*CBP WATER 100% (Distilled or Biologically Pure Water)
*COLOR (CSS) ( Vegetable anilines must be water-soluble and approved by the
Secretary of Health for use in cosmetics and cleaners.
PREPARATION METHOD:
A) INTO THE WATER NEEDED FOR THIS FORMULATION, ADD
THE INGREDIENTS ONE BY ONE IN THE ORDER INDICATED
AND MIX UNTIL YOU OBTAIN A HOMOGENEOUS MIXTURE.
B) SHAKE AND HOMOGENIZE THE MIXTURE AND IF YOU
DESIRE, ADD COLOR TO TASTE, GENERALLY 1 OR 2 DROPS
PER LITER OF BLUE COLOR.
C) PACKAGE.
23. – “LIQUID CARPET WASHING”
PRODUCT DESCRIPTION:
LIQUID PRODUCT WASHES CARPETS WITH HIGH EFFICIENCY STAIN
REMOVAL AND DEGREASER DISSOLVED IN A LITTLE WATER AND
WASHING WITH A BRUSH ON CARPETS AND RUGS, USE UNDILUTED IN
DIFFICULT CASES.
FORMULATION:
FORMULA %
A) SODIUM 7
ALKILBENZENSULPHANATE
B) SODIUM LAURYL ETHER 7
SULFATE
C) COCODIETHANOLAMINE 2
D) BUTYLCELLUSOLVE 4
E) NONYL PHENOL ETHOX. 10M 2
F) FORMOL 0.25
G) WATER 77.25
PREPARATION METHOD:
A) PLACE HALF OF THE TOTAL WATER IN A CONTAINER AND
DISSOLVE THE INGREDIENT AT (65-70°C), WITH VIGOROUS
AGITATION.
B) CONTINUE ADDING THE REMAINING INGREDIENTS IN THE ORDER
LISTED, AND SHAKE UNTIL THE MIXTURE IS UNIFORMED AND LET
IT STAND.
C) PACKAGE.
PRODUCT DESCRIPTION:
PRODUCT SIMILAR TO ARMOR-ALL, CONSIDERED WITHIN THE
CATEGORY OF CAR COSMETICS, WHICH APPLIED TO PLASTIC WHEELS
AND FENDERS, GIVES THEM SHINE AND COLOR, DUE TO THE ACTION OF
THE OILS AND MOISTURIZERS.
FORMULATION :
FORMULATION %
1. SILICONE OIL 5.0
2. EMULSION 36 20.0
3. NONYL PHENOL 10 MOLES 1.0
4. GLYCERINE 5.0
5. FORMOL 0.1
6 CBP WATER 100% 64.0
*CBP WATER 100% (Distilled or Biologically Pure Water)
PREPARATION METHOD:
A) IN A CONTAINER PERFECTLY MIX THE NONYL PHENOL
AND THE SILICONE OIL.
B) ADD THE SILICONE EMULSION AND EMPTY THE
CONTAINER CONTAINING THE TOTAL WATER, SHAKE
VIGOROUSLY UNTIL THE MIXTURE IS UNIFORMED.
C) ADD THE REMAINING INGREDIENTS, WITH VIGOROUS
AGITATION AND LET REST.
D) PACKAGE.
NOTE:
SHAKE BEFORE USING
IF YOU WANT THICK VISCOSITY, DISSOLVE 2-4%
POLYETHYLENE GLYCOL DIESTEARATE (PEG-150) IN HOT
WATER AND ADD IT TO THE FINAL PRODUCT.
PRODUCT DESCRIPTION.
PRODUCT FOR WASHING BODY AND ANY PAINTED SURFACE THAT
REQUIRES CAREFUL WASHING, DUST-DUSTING ACTION AND LEAVES A
TOTAL CLEANING.
FORMULATION:
FORMULATION %
1. SODIUM LAURYL ETHER SULFATE 10.0
2. SODIUM 14.0
ALKILBENZENSULPHANATE
3. NONYL PHENOL 10 MOLES 2.0
4. DIETHANOLAMIDE 2.0
5. FORMOL. 0.1
6. SATURATED SOLUTION OF 3.0
SODIUM CHLORIDE
7 COLOR css
8 CBO WATER 100% 68.90
*CBP WATER 100% (Distilled or Biologically Pure Water)
*COLOR (CSS) ( Vegetable anilines must be water-soluble and approved by the
Secretary of Health for use in cosmetics and cleaners.
PREPARATION METHOD:
A) IN A SUITABLE CONTAINER, PLACE HALF OF WATER AND
INGREDIENT #2 AND HEAT TO 70°C, STIRRING UNTIL
DISSOLVED.
B) THEN ADD THE REST OF THE INGREDIENTS WITH
VIGOROUS MIXING.
C) ADD THE REST OF WATER, STIR AGAIN AND LET REST.
D) WHEN THE TEMPERATURE IS THAT OF THE
ENVIRONMENT, ADD THE SATURATED SOLUTION OF
SODIUM CHLORIDE TO GIVE DESIRED VISCOSITY.
E) PACKAGE.
NOTE:
IF COLOR AND FLAVOR ARE ADDED, IT WILL BE BEFORE
ADDING THE SODIUM CHLORIDE.
FORMULA 1.- KETONE 20%, TOLULOL 20%, XYLOL 20%, NAPHTHA 40%.
FORMULA 2.- KETONE 30%, ALCOHOL 10%, TOLUOLOL 20%, NAPHTHA
40%
FORMULA 3.- HEXANE 10%, METWIOL 10%, MIBK 3%, TOLUOL 37%,
NAFTA 40%.
FORMULA 4.- KETONE 10%, ALCOHOL 20%, TOLUOL 30%, XYLOL 17%,
MIBK 3%, NAFTA 20%.
WE MUST ALSO CLARIFY THAT THE OIL CAN BE USED AND REFINED
AS MANY TIMES AS NECESSARY WITHOUT LOSING ITS QUALITY AND
THAT IT CAN BE SOLD AT A FAIRLY LOW PRICE AND AT THE SAME
TIME RECEIVE VERY GOOD PROFITS SINCE THE BURNED OR USED OIL
IS OBTAINED AT A PRICE VERY LOW AND SOMETIMES GIVED AWAY IN
THE BRANCH NEGICOOS. THERE ARE SEVERAL WAYS TO PROCESS
OIL, WE ARE GOING TO GIVE YOU A VERY SIMPLE ONE:
BY FILTERING.-
YOU CAN DO IT USING CONTAINERS IN CYLINDRICAL SHAPE AND
WITH A FUNNEL END, PLACING A SMALL STOP KEY AT THE TIP TO
REGULATE THE DRIP.
INSIDE THE PART OF THE FUNNEL PLACE THE FILTERING MATERIAL,
FOR EXAMPLE: SILICAN SAND SO THAT THE IMPURITIES CONTAINED
IN THE OIL REMAIN THERE AND ONLY THE RE-REFINED OIL COME
OUT SLOWLY, WHICH YOU CAN VERIFY COMES OUT WITH A
TRANSPARENCY PERFECTLY, IT IS CONVENIENT THAT BEFORE
PLACING THE OIL INTO THIS FILTER, YOU HAVE IT IN 200 LITER TANKS
UNDERSTANDING FOR AT LEAST 2 or 3 DAYS SO THAT THE IMPURITIES
SETTLE AND WHEN PROCESSING IT, THE OIL IS LESS DIRTY WHEN
YOU TAKE THE OIL FROM THE DRUM (200 LITERS) TO PASS IT INTO
THE FILTER, DO IT SLOWLY AND ONLY TAKING THE UPPER PART
WITH A CONTAINER UNTIL YOU REACH THE FAT PART THAT IS AT
THE BOTTOM, WHICH SHOULD BE USED AS FUEL, THIS FUEL
ENERGETICO HAS A LOT OF DEMAND FOR THE KILNS FOR EXAMPLE:
FROM THE BRICKMEN WHO PAY VERY WELL, THERE YOU CAN
RECOVER WHAT YOU SPENT WHEN PURCHASING THE BURNED OIL.
PROCESS:
ALL THE WATER IS POURED INTO A RIGID MATERIAL CONTAINER
WITH A CAPACITY OF 50 LITERS, INTO IT AN ELECTRIC IMMERSION
HEATER IS INSERTED AND THE WATER IS HEATED BETWEEN 60° C
AND 70° C. MAINTAINING THAT TEMPERATURE FOR 28 MINUTES. AT
THAT TEMPERATURE THE HEATER IS REMOVED AND 1,333 GRS ARE
POURED. OF TERGITOL NPX, IT IS STIRRED WITH A WOODEN SHOVEL
UNTIL MAKING A HOMOGENEOUS MIXTURE, THE SODIUM ALGINATE
OR THE PREVIOUSLY PREPARED SUBSTITUTE MIXTURE IS
GRADUALLY ADDED. KEEP STIRRING NOW FASTER FOR 3 MINUTES, A
MIXTURE WILL FORM IN THE FORM OF A THICK AND VISCOUS MASS.
NOW IS THE TIME TO POUR ALL THIS COMPOUND INTO A MIXER
RUNNING AND BLEND FOR 5 MINUTES. SINCE ARNYL ACETATE IS
VERY SOLUBLE IN ISO-PROPYL ALCOHOL AND NOT IN WATER, IT IS
CONVENIENT TO DISSOLVE IT FIRST IN THE ALCOHOL AND THEN IN
THE AGGREGATE OF WATER, TERGITOL AND SODIUM ALGINATE
CONTAINED IN THE TANK.
INTO A GLASS JUG WITH A CAPACITY OF 16 LITERS, POUR THE 8 1/3 OF
ISO-PROPYL ALCOHOL AND THEN ALSO THE 25 CC OF ARNYL
ACETATE, STIRRING FOR 5 MINUTES. THE CONTENT OF THE JUG WILL
BE ADDED LITTLE BY LITTLE AND WITHOUT STOPING WHISKING THE
MASS CONTAINED IN THE CONTAINER, THE TEMPERATURE SHOULD
BE BETWEEN 30 AND 35° C.
THE WHOLE SOLVENT IS GRADUALLY INCORPORATED, IN
CONNECTION WITH THE ARNYL ACETATE. THE DOUGH AS A WHOLE
WILL HAVE TO THICKEN AND ITS VOLUME WILL INCREASE,
THEREFORE A MIXING OF LESS THAN 5 MINUTES WILL BE
PROCEEDED. THE CONTENTS OF THE BLENDER WILL QUICKLY EMPTY
INTO THE 80 LITER TANK AND WILL BE COVERED.
IT IS SUGGESTED TO PACK THE PRODUCT IN PLASTIC PACKAGING.
FORMULA:
VERMICULITE 360 GRAMS.
LUBRICANT OIL 140 GRAMS.
LABEL:
GIVE YOUR PRODUCT AN APPROPRIATE NAME FOR EXAMPLE: PISTON
PACK, VITA MOTOR, ETC. AND THEN THE OBJECT OF THE PRODUCT
THAT IS, PISTON SEALANT.
THIS PRODUCT PLACES A STRONG MINERAL SEAL ON USED ENGINE
PARTS. INCREASES COMPRESSION AND ENGINE EFFICIENCY.
WORK THE ENGINE FOR A FEW MINUTES TO WARM IT UP, STOP THE
ENGINE, REMOVE THE SPARK PLUGS AND PUT 20 TO 30 GRAMS OF
“PISTON PACK” IN EACH CYLINDER. REPLACE THE SPARK PLUGS. RUN
THE ENGINE AND LEAVE IT WORKING WITHOUT RUNNING THE CAR
FOR 5 MINUTES AND THEN RUN THE ENGINE SO THAT IT OVERHEATS.
BECAUSE THE PRODUCT ACHIEVES ITS EFFECT SOON BY WARMING UP
THE ENGINE. THIS WARM-UP SHOULD LAST ABOUT 30 MINUTES. STOP
THE ENGINE, CONTINUE USING THE CAR IN THE NORMAL WAY AND
YOU WILL IMMEDIATELY NOTICE BETTER ENGINE OPERATION AND
REDUCED OIL CONSUMPTION. IF THE ENGINE BECOMES DIFFICULT TO
START OR HAS FAULTS, REMOVE THE SPARK PLUGS AND FILES,
BECAUSE SOMETIMES THE PISTON PACK GETS FILTHY ON THE SPARK
PLUGS: THIS ONLY HAPPENS THE FIRST TIME IT IS APPLIED AND THEN,
NEVER AGAIN.
THE MARKET IS VERY BROAD AND THE PRICE THAT CAN BE CHARGED
IS HIGH, TAKING INTO ACCOUNT THE EXPENSIVE REPAIR IT AVOIDS.
TO MAKE A SUPERIOR PRODUCT, USE 90 GRAMS OF EXFOLIATED
VERMICULITE AND 270 GRAMS OF 30 MESH UNEXFOLIATED
VERMICULITE, AS ORDERED WHEN PURCHASED.
UNEXFOLIATED VERMICULITE HAS THE PARTICULARITY OF
INCREASE IN VOLUME WITH HEAT, FORMING A BETTER SEAL IN THE
ENGINE.
34. - CAR WAX:
Yield: 200g
Preparation time: 1 hour
Expiration: 3 months
Savings: 50%
Ingredients:
• 3 1/2 tablespoons of carnauba wax* (20 g)
• 1 cup of turpentine**
• 1/3 cup of yellow wax* (40 g)
• 1 teaspoon mineral oil
Utensils:
• Small glass bowl
• Tongue depressor
• Plastic jar (for packaging)
Procedure:
1.- Put water on the heat in the saucepan. When it comes to a boil, place the bowl
with the yellow wax and carnauba wax inside so that they melt in a double boiler.
2.- Once both waxes have melted, remove the saucepan from the heat and place it in
a ventilated place, away from the stove.
3.- Little by little add the turpentine to the waxes, moving gently with the tongue
depressor until the ingredients are integrated. Let the mixture cool until it begins to
solidify.
4.- Shake the mixture again to homogenize it and add the mineral oil, beating until a
creamy consistency is achieved. Pour the mixture into the jar and cover.
How to use:
Your car should be clean and dry before applying the wax.
Using a clean cloth, apply the wax in sections.
Wait for it to dry.
Rub the surface of the car vigorously with another clean, dry cloth until traces of
grease disappear. For best results, wax your car in the shade.
Recommendations:
• It is important to wax your car to protect the paint from the environment. If you
notice that the paint is dull and stained, it is time to wax it.
• Do not wax the car too frequently because it can be counterproductive in the long
run as the paint can deteriorate.
Interesting data
• The turpentine content of the wax helps remove paint stains; waxes, on the other
hand, protect it.
• Mineral oil serves the function of softening the waxes.
• Carnauba wax is a wax of plant origin, which is also used in the food industry as
an additive to give shine to foods and improve their appearance.
• Some fruits, such as apples, naturally contain a type of wax that acts as protection.
Conservation
Store the wax in a ventilated place and out of reach of children. It is very important
that the jar is tightly closed to prevent the turpentine from evaporating.
35. - VINYL POLISHER:
Yield: 250 ml
Preparation time: five minutes
Expiration: six months
Savings: Approximately 55% compared to the commercial product.
Ingredients:
Utensils:
Globe beater
Plastic bottle
Funnel
Procedure:
1. Pour the water into a bowl. Add the glycerin and sodium lauryl sulfate. Shake
gently to dissolve them.
2. Add the mineral oil, stirring constantly, until you obtain an emulsion.
3. Using the funnel, pour into the plastic bottle.
Conservation
Store vinyl polish in a cool, dry, dark place, out of the reach of children.
Recommendations:
You can substitute any dish detergent for sodium lauryl sulfate.
Instead of mineral oil you can use cooking oil, only it has the disadvantage of
oxidizing faster and becoming rancid.
As it does not contain toxic substances, you can also use this product on plant
leaves. Thus, in addition to cleaning them due to the detergent, the oil and glycerin
will give them shine.
In old paints, it must be previously removed with white polishing paste before
applying it, in new or metallic paints, it is applied with the vehicle previously
washed over the entire surface with a clean cloth or tow and left to dry for a few
minutes to enjoy a shiny and shiny finish. in paint in poor condition of a new car.
9. Formula:
Preparation:
In a plastic container, mix the water and silicone for 2 minutes, then add the
mergal, carbopol 940 and triethanolamine and mix for another 2 minutes to let it rest
for 2 hours until it becomes a gel and pack it, the consistency of the gel. It depends
on the carbopol, you can add more or reduce it, it is a matter of testing, this is a new
Formula, which does not exist on the market yet.
Production costs are low, demand depends on the management of advertising and
the presentation we give to the product.
INGREDIENTS:
1) VARSOL, DEODORIZED – 350 GRMAS.
2) STEARIC ACID (DOUBLE OR TRIPLE) – 75 GRAMS.
3) NEODOL – 43 GRMS.
4) ANHYDROUS LANOLIN – 5 GRMS.
5) TRIATHONALAMINE (TEA) – 34 GRMS.
6) GLYCERINE – 20 GRMS.
7) METHYL – PARABEN – SODIUM – 2 GRMS.
8) H2O (WATER) – 73 LITERS
9) VEGETABLE COLORING AND PERFUME (TO TASTE)
PREPARATION:
In a pewter or aluminum container, add the first four ingredients, stir well and put
over low heat until the products melt: at the same time, in another enamel or
aluminum container, add the remaining ingredients, except the perfume and the
color and we also bring it to a simmer until it reaches a temperature of 80º (that is, it
is about to boil), once this process is achieved we combine the two mixtures under
continuous stirring, until the point of cream, finally we add the fragrance and the
color, test the PH, which should be from 9 to neutral.
NOTE:
If the PH is exceeded, lower it with muriatic acid, Detersin-CR, is used in hospitals
and clinics as an excellent disinfectant, bactericide and germicide; it is also used in
washing clothes, dishes, floors, bathrooms, swimming pools, etc.
CAUTION:
When manufacturing this product, use gloves, masks, glasses and appropriate
clothing; Keep out of the reach of children.
INGREDIENTS:
1) ARKOPAL No. – 3000 GRMS.
2) DEODORIZED VARSOL – 6000 GRMS.
3) DETERSIN-K 1000 GRMS.
4) NEODOL – 150 GRMS.
PREPARATION:
In a plastic container, mix the arkopal with the detersin-k until homogenization is
achieved, meaning that the products can be well mixed, then we add the deodorized
varsol under continuous stirring (preferably with a mixer). Finally we add the
neodol without stopping beating, package and store in a cool place.
NOTE:
This product does not have a PH, since it is for purely industrial use.
In hot climates the product tends to separate a little, if this happens increase the
amount of arkopal by about 100 more grams.
HOW TO USE:
This product should be applied to the surface with a brush and left to work for 10 to
20 minutes, then the product should be removed with plenty of pressurized water or
steam washed.
CAUTION:
Keep out of the reach of children.
INGREDIENTS:
1. NITROCELLULOSE RESIN – 700 GRMS
2. ACRYLIC TINER SOLVENT – 300 GRMS
PREPARATION:
Mix these two ingredients in order, under continuous stirring after this quickly
pack.
NOTE:
Normally this lacquer is applied with a compressor, the solvent can vary according
to the viscosity that the manufacturer wants to give it.
PRECAUTIONS:
When manufacturing this product, use glasses, masks and gloves, keep in a cool
and dry place, out of the reach of children.
41. - “NEUTRAL” LIQUID CAR WAX
INGREDIENTS:
1. YELLOW BEESWAX – 1,500 GRMS
2. CARNAUVA WAX – 600 GRMS
3. 60% EMULSIFIED SILICONE - 47.5 GRMS
4. PINE TURMENTINE – 1,650 GRMS
5. PINE OIL – 50 GRMS
PREPARATION:
In an enamel or aluminum container, we melt the waxes, without letting them burn;
We remove from the heat and add the silicone without stopping stirring, finally the
turpentine, mix well until we achieve a homogeneous mixture, we proceed to
package and that's it.
NOTE:
Apply this wax to a clean, dry surface and let it act for a few minutes before
proceeding to shine.
PRECAUTIONS:
When manufacturing this product, wear glasses, masks and gloves. Keep out of the
reach of children.