Académique Documents
Professionnel Documents
Culture Documents
LubeCentr al
LubeCentral
Oil & Coolant Fill & Ev acuation Sy
Evacuation stems
Systems
Banlaw Pipeline designs, manufactures, installs and services a range of centralised service systems.
The LubeCentr
LubeCentralal System allows the operators to safely fill and evacuate oil and coolants from a
TM
VERSATILITY:
• The LubeCentr
LubeCentralal System provides a service box
TM
SAFETY:
TYPICAL SERVICE BOX LAYOUT • All fittings incorporate Dry-Break Technology to
eliminate spillage.
• Each fitting is unique, therefore each type of fluid/oil
cannot be accidently mixed
• All fittings use a ball locking mechanism to ensure a
secure, clean and reliable connection.
• Fluids can only transfer when nozzles and receivers
are fully connected.
• LubeCentr
LubeCentral al eliminates the need for operators to
TM
ENVIRONMENTAL:
• No spillage means Environment Protection Authority
compliance.
• The efficient evacuation systems allows for complete
used oil/coolant recovery for total recyling of waste.
• Complete recovery means more accurate waste
records.
Leader
Leaderss in Global Refuelling Technology
Technology
BANLAW
PIPELINE
Part No. Description
AUS29WB/H&P
Plug/Cap Suffix
Fitting Part No.
Part
(optional)
Tailpiece Suffix
(optional)
TM
On Vehicle Locations ffor
Vehicle or LubeCentr al Service Bo
LubeCentral x
Box
p
Sum
Deliv ery & Ev acuation
ystem
Delivery Evacuation
Hoses
sion
Cr
Hy
ant S
an
smis
kc dr
as au
e lic Diesel Fuel Tank
Cool
Su
Tran
m Ta
p nk
Possible On Vehicle
Vehicle
Locations
LubeCentr al
LubeCentral TM
Section A-A
A-A
Service Box
Box
Leader
Leaderss in Global Refuelling Technology
Technology
BANLAW
PIPELINE
Crank
Crank case
ankcase
• Commonly used to fill and evacuate
crankcase oils.
• Safe Working Pressures ;
AUS27W : 10 MPa (1450 psi)
AUS29W & AUS29L : 3 MPa (435 psi)
Coupled Nozzle & Receiver : 4.75 MPa (690 psi)
Leader
Leaderss in Global Refuelling Technology
Technology
BANLAW
PIPELINE
Tr ansmission
• Commonly used to fill and evacuate
transmission oils.
• Safe Working Pressures ;
AUS32W : 4.25 MPa (615 psi)
AUS33W : 10 MPa (1450 psi)
Coupled Nozzle & Receiver: 11.5 MPa (1670 psi)
Hy dr
Hydr aulic
draulic
• Commonly used to fill and evacuate
hydraulic oils.
• Safe Working Pressures ;
AUS34A : 10 MPA (1450 psi)
AUS41A : 10 MPA (1450 psi)
Coupled Nozzle & Receiver: 4.0 MPa (580 psi)
Leader
Leaderss in Global Refuelling Technology
Technology
BANLAW
PIPELINE
Coolant
• Commonly used to fill and evacuate
coolant fluids.
• Safe Working Pressures ;
AUS36A : 10 MPa (1450 psi)
AUS37W : 10 MPA (1450 psi)
Coupled Nozzle & Receiver: 7.5 MPa (1090 psi)
Push To Connect
To
• Commonly used to fill and evacuate
oils.
• Safe Working Pressures ;
AUS38W : 10 MPa (1450 psi)
AUS39W : 1.5 MPA (217 psi)
Coupled Nozzle & Receiver: 10 MPa (1450 psi)
Leader
Leaderss in Global Refuelling Technology
Technology
BANLAW
PIPELINE
Alternative fittings
Alternative
• Alternative higher flow fittings used
to fill and evacuate oils.
• Safe Working Pressures ;
AUS80 : 6 MPa (870 psi)
AUS81 : 2.5 MPA (365 psi)
Coupled Nozzle & Receiver: 2.5 MPa (365 psi)
AUSV3
OIL SAMPLE VALVE
Leader
Leaderss in Global Refuelling Technology
Technology
BANLAW
PIPELINE
Bulk T
Trr ansfer Nozzles
• Typically used to transfer diesel and oils to/from bulk storage tanks.
• Dry Break technology minimises spillage during disconnection from receiver.
• Does not incorporate automatic shut-off device. (whilst attached to receiver)
• Durable zinc-plated steel constuction, with Viton seals.
• Safe working pressure for both nozzles is; 4MPa (580 psi)
AUSS5 NOZZLE
AUSS5 ASSEMBLY
AUSS6 NOZZLE
One Way V
Wa alv
Valv
alvee
• Non spring-loaded ball design.
• 1/2” NPT (F) threaded connection each side.
• Zinc-plated mild steel construction with diesel and oil resistant polypropylene ball and Viton ‘O’
ring seals.
• Commonly used on fuel return line from diesel fuel injector pump, to prevent back flow into
pump during refuelling.
Leader
Leaderss in Global Refuelling Technology
Technology
BANLAW
PIPELINE
Technical Specification
1. A safety factor of approx. 4 has been applied to the burst pressure in order to obtain the Safe
Working Pressure (S.W.P.) quoted in this brochure.
2. Unless noted otherwise, all fittings are manufactured from zinc plated steel components, fitted
with Viton seals. Similarly, all plugs and caps are manufactured from Acetal (plastic).
3. Due to a wide variety of fluids typically used, the flow-rate capability of each fitting has not
been quoted. Specific flow test data is available on request.
4. Flow test data for AUSS5 bulk transfer nozzle engaged with AUS23 receiver.
300
250
200
Head Loss (kPa)
150
100
50
0
0 100 200 300 400 500 600 700 800 900 1000
Flowrate : (LPM)
Call for a full consultation Call your Authorised Banlaw Pipeline agent:
Banlaw Pipeline Pty. Ltd.
17 Strathmore Road
Caves Beach NSW 2281
Australia
Telephone +61 (0)2 49714888
Fax. +61 (0)2 49714910
Website: www.banlaw.com Please Note: Use only Banlaw factory replacement
Email: sales@banlaw.com.au parts. Failure to do so may cause equipment
ABN 88 062 044 071 failure or malfunction, vehicle damage and
AUS & US Patents Apply
invalidate factory warranty.
© 2001 Banlaw Pipeline
Leader
Leaderss in Global Refuelling Technology
Technology 06/01 LC01