Académique Documents
Professionnel Documents
Culture Documents
brad-wilson-24.bebo.com
bosch 718
bosch 738
bosch com607
bosch 908
bosch 909/909s
note: this trick has only been reported working on prepaid gsm cards and in some
countries and with some software versions.
the prepaid gsm sim card is a kind of "sim card" which only has a certain amount
of credit on it.
here's the trick: dial the number normally and press yes. while "connecting" is
shown on the screen, the following procedure should be carried out:
press clr then 0 then # and then no (twice) so as to switch off the phone. you
can then still speak on the phone while it is switched off but the sim card does
not record your calls which will lead to free phone calls in some countries.. i
hope!!
you now have to press the [menu] and scroll to the 'eng field options' function
with the keys, and enable it.
de-activate rbs
get distance from base station - place a call, when it is answered, press [menu]
until 'eng field option' is displayed, press [ok], select 'active cell', press
[ok], press [menu] until 'time adv xxx' appears, where xxx is a number. multiply
this number by 550, and the result is the distance from the rbs (radio base
station), in meters.
get signal quality - press [menu] until 'eng field option' is displayed, press
[ok], select 'active cell', press [ok], press [menu] until 'c1' appears. this is
the signal quality. if it becomes negative for longer than 5 seconds, a new cell
is selected.
reset to defaults
*73738#
sp lock info
the procedure will show if your phone is locked.
*#3210# for sim lock info,
*#8140# for net lock info.
sim lock
*#4960 # - inquiry * 4960 * password * password # (send?) to lock
#4960* password # to unlock
[password] is an 8 digits number
net lock
*#7320# - inquiry * 7320 * password * password # to lock.
#7320* password # to unlock.
[password] is an 8 digits number
net lock 2
*#2220# - inquiry * 2220 * password * password # to lock
#2220* password # to unlock
[password] is an 8 digits number
subnet lock
*#1110# - inquiry * 1110 * password * password # to lock
#1110* password # to unlock
[password] is an 8 digits number
warranty menu
*#92702689#
7832 (ok) displays the date where the phone was purchased
87267 (ok) transfers all phone numbers, pictures, sounds from one phone to
another
hands free
to continue an existing call when placing the 8110i into the hands free car kit
without it dropping the call, press the memory button just before connecting the
cable and placing it in the cradle.
service menu
*#92702689#
warranty menu
*#92702689#
7832 (ok) displays the date where the phone was purchased
9268 (ok) displays serial number
87267 (ok) transfers all phone numbers, pictures, sounds from one phone to
another
call menu
(in a call) you can press and hold down the menu button for 3 sec. and a menu
appears. (transfer, mute etc.)
warm start
*#2565*#
security code
*#7489*#
spurious interrupt
*#7787*#
activate the beep signal when the phone is reconnected to the network
*#2337*#
show imei
*#06#
program status
*#9998*246#
debug screens
*#9998*324#
watchdog
*#9998*364#
eeprom error stack - use side keys to select values. cancel and ok.
*#9998*377#
trace watchdog
*#9998*427#
jig detect
*#9998*544#
memory status
*#9998*636#
software version
*#9998*837#
test vibrator - flash the screenligth during 10 seconds and vibration activated
*#9998*842#
diag
*#9998*872#
software version
*#9998*9999#
view imei
*#06#
show software version and manufacture date
# 8377466 #
*#000000#
siemens s1 secrets
show imei
*#06#
tetris
power on phone and enter pin. before phone has locked onto network, f9, send own
number, hit right button, hit 9. left is 2, right is 8, rotate is 5,
and drop is 4.
monitor mode
menu, 9 (phone options), 7 (phone status), left display button (left menu key),
5553756, hangup button (red handset key)
now "monitor" should appear at the bottom of the network options menu.
pressing the right display button when in monitor mode will show a list of the
six cells with the strongest signals.
monitor mode
hold c and press 379
secret menu
hold c and press 987
version number
hold c and press 597
phase1 and 2
hold c and press 499
warm start
hold c and press 179
unlock menu
hold c and press 787090
name (required):