Académique Documents
Professionnel Documents
Culture Documents
07/08/2008
Fire Protection This product is a watertight sealant that will help control the spread of fire, smoke and noxious gases.
SECTION 2: INGREDIENTS
Ingredient
Calcium Carbonate Siloxanes and Silcones, Di-Me, Hydroxy-Terminated Poly(Dimethylsiloxane) Amorphous Silica Ketoxime Silane METHYL ETHYL KETONE OXIME (Trimethoxysilylpropyl)Ethylenediamine
C.A.S. No.
1317-65-3 70131-67-8 63148-62-9 7631-86-9 22984-54-9 96-29-7 1760-24-3
% by Wt
15 - 40 15 - 40 15 - 40 0.5 - 5 3- 7 < 1.5 0.5 - 1.0
MATERIAL SAFETY DATA SHEET 3M(TM) Fire Barrier Water Tight Sealant 1000 NS and 1003 SL
07/08/2008
Eye Contact: Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing. Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Target Organ Effects: Persons previously sensitized to amines may develop a cross-sensitization reaction to certain other amines.
_________________________________________________________________________________________________ Page 2 of 7
MATERIAL SAFETY DATA SHEET 3M(TM) Fire Barrier Water Tight Sealant 1000 NS and 1003 SL
07/08/2008
Unusual Fire and Explosion Hazards: Not applicable. Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information.
7.2 STORAGE
Store away from acids. Store away from oxidizing agents.
MATERIAL SAFETY DATA SHEET 3M(TM) Fire Barrier Water Tight Sealant 1000 NS and 1003 SL
07/08/2008
Ingredient
Calcium Carbonate Calcium Carbonate Calcium Carbonate METHYL ETHYL KETONE OXIME METHYL ETHYL KETONE OXIME METHYL ETHYL KETONE OXIME Amorphous Silica
Authority
ACGIH OSHA OSHA AIHA CMRG CMRG CMRG
Type
TWA TWA, respirable TWA, as total dust TWA TWA STEL TWA, as respirable dust
Limit
10 mg/m3 5 mg/m3 15 mg/m3 10 ppm 3 ppm 10 ppm 3 mg/m3
Additional Information
Table Z-1 Table Z-1 Sensitizer
SOURCE OF EXPOSURE LIMIT DATA: ACGIH: American Conference of Governmental Industrial Hygienists CMRG: Chemical Manufacturer Recommended Guideline OSHA: Occupational Safety and Health Administration AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
Vapor Pressure Specific Gravity Melting point Solubility in Water Volatile Organic Compounds Percent volatile VOC Less H2O & Exempt Solvents
< 5 mmHg [@ 25 C] 1.31 - 1.33 [Ref Std: WATER=1] No Data Available Nil <3% <=3.8 % weight < 35 g/l
Condition
Not Specified Not Specified
_________________________________________________________________________________________________ Page 4 of 7
MATERIAL SAFETY DATA SHEET 3M(TM) Fire Barrier Water Tight Sealant 1000 NS and 1003 SL
07/08/2008
Oxides of Nitrogen
Not Specified
Hazardous Decomposition:
silicon dioxide, calcium oxide and possible traces of incompletely burned carbon products.
Reactivity Hazard - No
Delayed Hazard - No
This material contains a chemical which requires export notification under TSCA Section 12[b]: Ingredient (Category if applicable)
METHYL ETHYL KETONE OXIME
C.A.S. No
96-29-7
Regulation
Toxic Substances Control Act (TSCA) 4 Test Rule Chemicals
Status
Applicable
_________________________________________________________________________________________________ Page 5 of 7
MATERIAL SAFETY DATA SHEET 3M(TM) Fire Barrier Water Tight Sealant 1000 NS and 1003 SL
07/08/2008
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA. All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS. The components of this material are in compliance with the new chemical notification requirements for the Korean Existing Chemicals Inventory. The components of this product are listed on the Australian Inventory of Chemical Substances. All the components of this product are listed on China's Inventory of Chemical Substances. The components of this product are in compliance with notification requirements in the Philippines. The components of this product are listed on the Canadian Domestic Substances List. Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
WHMIS: Hazardous
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
MATERIAL SAFETY DATA SHEET 3M(TM) Fire Barrier Water Tight Sealant 1000 NS and 1003 SL
07/08/2008
Section 1: Product use information was modified. Section 16: HMIS hazard classification for protection was modified. Section 1: Division name was modified. Copyright was modified. Section 5: Extinguishing media information was modified. Section 6: Release measures information was modified. Section 7: Handling information was modified. Section 8: Engineering controls information was modified. Section 8: Skin protection phrase was modified. Section 10: Hazardous decomposition or by-products table was modified. Page Heading: Product name was modified. Section 15: Inventories information was modified. Section 5: Flash point information was modified. Section 9: Property description for optional properties was modified. Section 9: Specific gravity information was modified. Section 9: Flash point information was modified. Section 9: Vapor pressure value was added. Section 14: ID Number Heading Template 1 was added. Section 14: ID Number(s) Template 1 was added. Section 2: Ingredient table was added. Section 15: TSCA section 12[b] text was added. Section 8: Exposure guidelines ingredient information was added. Section 15: TSCA section 12[b] information was added. Section 8: Exposure guidelines data source legend was added.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
_________________________________________________________________________________________________ Page 7 of 7