Académique Documents
Professionnel Documents
Culture Documents
Software v1.4
(i) Contents
(i) Contents........................................................3 (ii) Basic Layout .................................................4 1.00 Overview .......................................................5 1.01 Getting Started ..............................................5 2.00 Introduction ...................................................6 2.01 The Global Positioning System (GPS) ..........6 2.02 How GPS Works ...........................................6 2.03 SatSYNC.......................................................6 2.04 Base Mapping ...............................................6 2.05 Battery Insertion ............................................7 2.06 Switching On and Off ....................................7 2.07 Map Card Insertion .......................................7 2.08 Keypad Lock .................................................7 2.09 Battery Indicator & Stop/Record Icon............7 2.10 Six Primary Pages ........................................8 3.00 GPS Map Screen ..........................................9 3.01 Map Packs Page .........................................10 4.00 Primary Pages ............................................10 4.01 MAIN MENU Page ......................................11 4.02 COMPASS Page .........................................11 4.02a POINTER Page...........................................12 4.03 TRIP LOG Page ..........................................13 4.04 GPS STATUS Page ....................................14 5.00 SETTINGS MENU Page .............................15 5.01 Power Control .............................................16 5.02 Advanced Power Control ............................17 5.03 Backlight .....................................................18 5.03a Screen Data Capture ..................................18 5.04 2 Data Box Layout ......................................19 5.04a Data options for data box overlays.........19-20 5.05 4 Data Box Layout (upper) ..........................21 5.06 4 Data Box Layout (lower) ..........................21 5.07 GPS Settings ..............................................22
Satmap Systems Ltd
5.08 Memory Status ............................................23 5.09 Units and Set Speed ...................................23 5.10 Compass Settings .......................................24 5.11 Calibrate Compass .....................................25 5.12 Set Trip Data ...............................................26 5.13 Volume Control ...........................................27 5.14 Buttons Control ...........................................27 5.15 Screen Data Options...................................28 5.16 Time Offset..................................................28 5.17 Languages ..................................................29 5.18 About...........................................................29 6.00 PLANNING Screen .....................................30 7.00 ROUTES MENU Page ................................31 7.01 Create New Route ......................................32 7.02 ROUTE EDIT Page .....................................33 7.02a Edit Title ......................................................33 7.02b Edit Comments ...........................................34 7.02c Reverse Route ............................................34 7.02d Edit Route Map ...........................................34 7.02e Edit Waypoints ............................................34 7.02f Delete Route ...............................................34 7.02g Copy............................................................34 7.02h Move Route to SD Card ..............................34 7.02i Copy Route to SD Card ..............................34 7.03 ROUTE MAP Page .....................................35 7.03a ROUTE PLAN Page....................................35 7.03b ROUTE CARD Page ...................................36 7.05 Create Routes Folders Using SatSYNC .....37 8.00 POSITION INFO Page ................................38 9.00 POI Menu ....................................................39 9.01 Add New POI Page .....................................39 9.02 ADD POIs Page ..........................................40
9.03 Keypad ........................................................41 9.04 POI CATEGORY Page................................41 9.04a Rename POI Category................................41 9.04b Copy POI Category .....................................41 9.04c Delete POI Category ...................................41 9.04d Add New POI by Grid Ref ...........................42 9.04e Add New POI by Map .................................42 9.04f Add New POI by Postcode .........................42 9.04g Move to SD Card ........................................42 9.04h Copy to SD Card .........................................42 9.05 My POIs Page .............................................43 9.05a POI 1 Page .................................................43 9.06 EDIT POI Page ...........................................44 9.06a Rename ......................................................44 9.06b Edit Description ...........................................44 9.06c Edit Location by Grid...................................45 9.06d Edit Location by Map ..................................45 9.06e Edit Warning Radius ...................................45 9.06f Edit Visibility ................................................45 9.06g Delete..........................................................45 9.07 Create POI Folders Using SatSYNC ..........46 9.08 POI Indicator Icon .......................................47 10.00 GoTo and Marker Page ...............................48 10.01 Set By Coords .............................................48 10.02 Set By Postcode .........................................48 11.00 Accessories............................................49-50 12.00 World Base Map .........................................51 13.00 General FAQs.........................................51-52 13.01 Mountain Biking FAQs ................................52 14.00 Trouble Shooting .........................................53 14.01 Tips.........................................................53-54 15.00 Glossary..................................................55-57
GPS antenna
Insert SD card
Backlight Boost
On/Off
1.00 Overview
1.00 Overview
Welcome to the world of OS mapping with GPS! The Active 10 is an intuitive unit, easy to use. Switch it on, wait for a couple of minutes and your position is shown as being the centre of the screen. As you move, so does the map. The unit is waterproof and the screen is backlit which means it can be used day or night in any weather. OS maps are sold separately on SD cards. The unit is supplied with a UK road map. The Active 10 is a standalone unit and you can plan routes on it whilst in the great outdoors. Satmaps online Route Planner allows the download of pre-planned routes, the upload of routes for editing and the printing of a paper version of the route to take as back-up when outdoors. The rock-steady bike bracket accessory makes the unit ideal for mountain biking and the unit is tailor-made for geocaching. (section 3.00). Use the zoom buttons, shown in section (ii), for detail/perspective. Moving the joystick changes the screen to the PLANNING screen (section 6.00); the blue position indicator circle will move away from the middle of the screen as you control the joystick to move the map. A visual cue that you are in planning mode is the orange locator circle which has longer crosshairs. In planning mode you can plan routes and also study the map using the joystick to pan (keep it pressed in the desired direction and the map moves faster). Although you will not get more detail than that available with 1:25k scale mapping, zooming in to closer scales allows magnification of detail which is sometimes hard to make out on paper maps. Whilst stationary, the unit will appear to be recording travelled distance and ascended height. This is due to the way GPS works. On car devices, filtering and locking masks the effect, but the Active 10 is designed for a different purpose and its sensitivity means that incremental differences in fixes accrue, resulting in an incorrect log. The unit gives accurate data once moving. The TRIP LOG page has a Start/Stop button for data logging. To clear previous data, press the Menu button, then choose a reset option. To begin data logging, press Start. If you pause, say, for lunch, press Stop but remember to press Start when you resume. Press Stop when you finish the route. A Stop/ Record icon next to the battery indicator shows whether the data log is paused or recording. Until Reset is pressed, the unit will operate as if you are following a single route. This means that if you press Stop, then relocate by car for example, on pressing Start again the car journey is represented by a straight line crumb trail and the data log will incorporate the car journey. An advantage of buying the rechargeable battery is that you should always be able to set off with a fully charged battery which means no break in contacts whilst changing batteries, hence no loss of logged data. A second advantage is that the rechargeable battery lasts significantly longer than AAs. To conserve battery power: press the front right button until you see Settings, select Settings, then Power Control and then adjust Automatic Screen Turn Off (to, say, Off after 3 minutes) by pushing the joystick sideways. Press Done, then Map. The Trail Up facility is disabled when in powersave mode. As with most software products, there will always be ongoing updates and developments. We strive continually to improve our product and value any feedback you may like to share with us. Please remember to register your Active 10 online so that we can notify you of updates which are available for download from our website.
2.00 Introduction
2.00 Introduction
Welcome to the Satmap Active 10. This product has been designed for use in outdoor sports such as walking, mountain biking, geocaching, orienteering, cross-country horse riding, family cycle rides and many other outdoor activities. Although robust and rugged it has not been designed to be your sole navigational aid. Since, like all electrical devices, the batteries can run out, we strongly advise users to carry paper mapping as a back up. A paper map of your location can be printed from our website's Route Planner. It is also advised that users are familiar with mapping cartography and can read and understand map symbols. (The symbols for both the OS Explorer 1:25,000 (1:25k) and Landranger 1:50,000 (1:50k) series mapping are given on our website.) The Satmap Active 10 is an enriching and valuable aid to the outdoor experience, allowing you to focus on your sport without worrying about your location. This product is sold in conjunction with Satmaps terms and conditions of sale. Please be aware that Satmap Systems Ltd. will upgrade this product on an ongoing basis and therefore this manual will be amended from time to time.
e-mail, forums (eg. the Satmap Route Share Forum) or viewed on PC based mapping systems compatible with the Satmap format (eg. the Satmap Online Route Planner). To view your trail on a PC: Connect the Active 10 to a PC Open SatSYNC Select the trail data (a .gpx file) and copy this to your desktop Drag the file into your PC mapping system eg. the Satmap Online Route Planner or Google Earth. (See sections 7.04 & 9.07)
2.03 SatSYNC
SatSYNC is free software available for download from our website. It allows you to connect your Active 10 to a PC via a standard USB connection. With this software you can upload/download routes and Points of Interest. These files can then be shared via
Getting Started
2.05 Battery Insertion
The Active 10 is powered by either three AA batteries or a rechargeable battery (section 12.00 (b) ). AA batteries vary significantly in power and life from one type to another. The most powerful on the market are the Lithium Energisers, a set of which are supplied with the Active 10. It is not advisable to use cheap batteries in the unit as they will have a short life.
Stop/Record icon
2.06
2.07
Successful satellite lock (a fix) is indicated at the top left of the screen, by the red cross turning to a green signal icon. The number of green crescents represents received signal strength. A weak lock is indicated by a single crescent plus a 2D caption (section 4.04). The unit is WAAS/Egnos enabled. This means users in the south of England and mainland Europe are able to benefit from differential GPS when one of the EGNOS satellites is in view (section 13.00). When this service is available, the green signal crescents turn blue and accuracy is enhanced. The unit does not lock on to the EGNOS satellites in the same way as with the GPS satellites, because they transmit a different type of data. On the GPS STATUS page, when visible, the EGNOS satellite icons (numbered 120, 122, 124 and 126) remain yellow and do not turn orange. Your position is shown as a blue dot in the centre of the screen. Once moving, a pointer appears on the blue circle, indicating the current direction of travel. As you move, a snail trail of red dots is laid down, indicating the path you have taken. (To change the dot size, see section 8.00). The Active 10 logs your position once every second. The rate at which red dots are displayed depends on the map scale and the speed of travel. Dots are laid down such that an appropriate distance is rendered between them to create a clear track. There is a powersave setting (see Advanced Power
Control, section 5.02), in which the screen data is updated once every 4 seconds. Trail Up mode orientates the map so that it matches your surroundings, similar to turning a paper map as you find your bearings. The North Up / Trail Up button cycles through North Up / Trail Up / Trail Up (Low). Trail Up (Low) mode positions the locator circle low on the screen so that you can see more mapping ahead of your position. If you switch to PLANNING the map will stay Trail Up. If you wish to switch the map to North Up, return to the GPS Map page and press the North Up/Trail Up button. The 4 data box option is not available in the Trail Up (low) mode as it would obscure the locator circle. Note: Trail Up is not available in advanced power saving mode. (A prompt page will remind you). This is because the screen refreshes more frequently in Trail Up, drawing more power. The toggle maps button can be used to toggle between different enabled maps without needing to zoom in or out. It will toggle between maps at the zoom level you are on. Note: Older maps are not enabled. If an enabled map card is loaded a mini toggle icon appears next to the Stop/Record icon.
Toggle icon
(GPS Map MAIN MENU COMPASS TRIP LOG GPS STATUS PLANNING/ GPS Map MAIN MENU etc.) Alternatively, scroll through the primary pages by pressing the joystick left/right. After navigating away from the Map Packs page, pressing any one of the 4 side buttons or the 2 front buttons displays the soft button symbols on-screen. (Soft refers to software/ programmable buttons whose function varies depending on which screen is displayed.) The side buttons are designed to be pressed in a sideways direction, enabling one-handed operation. With the buttons you have a choice: 2-click operation first click to reveal button images (with icons), second click for action. 1-click operation button is activated without the reveal (section 5.12). Toggle maps Data box Zoom In Zoom Out
3.00
Page
Map title
3.01 10
(GPS Map MAIN MENU COMPASS) The Active 10 has an electronic compass and a GPS compass and switches between the two at a preset speed (section 5.07). This is because the GPS compass is accurate with forward speed but not when static, whereas the electronic compass works better when static. It is important that the unit is held level (just like using a normal magnetic compass) and is calibrated correctly (section 5.11). Buttons: Calibrate Compass Go to Calibrate Compass page (section 5.11) Lock to GPS Return to last map screen Pointer Go to POINTER page (section 4.02a) Page Go to TRIP LOG page (section 4.03) Note: An electronic compass does not give as accurate a bearing as a standard magnetic compass. Lock to GPS
4.01
Page
Pointer
4.02
Page
11
4.02a POINTER
4.02a POINTER Page
(GPS Map MAIN MENU COMPASS POINTER) If you wish, instead of using a compass there is an option of following a pointer, which you can set to point in the direction of your desired destination ie. a waypoint, POI or GoTo point. To access the POINTER page, press the Pointer button on the COMPASS page (section 4.03). Buttons: Target type Scroll through overlays giving data on either nearest Waypoint, Point Of Interest or Go To Point Lock to GPS Return to last map screen Compass Return to COMPASS page (section 4.02) Page Go to TRIP LOG page (section 4.03) GoTo Point Only available once a GoTo Point has been set (see ROUTES MENU, section 7.00). A green flag will appear at the top of the pointer image. Next WayPoint Only available once a route has been plotted (see ROUTES MENU, section 7.01). A blue dot will appear at the top of the pointer image. In each case the two data field overlay contains information on bearing and distance to the target.
Satmap Systems Ltd
There are 3 types of target to select from using the Target type button. Nearest Point Of Interest (POI) Only available if a POI has been entered (see POIs, section 9.00). A POI icon will appear at the top of the pointer image.
Target icon
Compass
4.02a
Page
12
Lock to GPS Return to last map screen Menu Access a range of reset options Page Go to GPS STATUS page (section 4.04) Pressing Menu brings up the TRIP LOG menu, giving: Reset All Reset All & Convert Reset Log (keeps snail trail and elevation profile) Reset Trail (resets elevation data) Reset Trail & Convert Convert Trail to Track Set Trip Data (section 5.12) There are on-screen descriptors for each option. Note: If you transit between trips and press Start without resetting the log, the transit is shown as a straight line snail trail to your present location and will be incorporated into subsequent data logging. Select source of elevation data (section 5.07): Elevation data provided by the Ordnance Survey. This is from a gridded height data set, with 200 ft between grid lines. Spot heights above sea level are given at intersections and any given location is given a weighted average of the 4 surrounding spot heights.
GPS elevation data. GPS is less accurate when giving elevation data and errors of 50m may be encountered. The units data logging functions are intended to register a single trip. The log should be reset before starting the next trip. Using the Start/Stop button allows you to pause data logging during a journey eg. pausing for a lunch break. When Stop has been pressed, the unit stops all data logging. If you switch to the GPS Map screen and continue moving, no snail trail is left.
Lock to GPS
4.03
Page
13
Signal indicator
Lock to GPS
4.04
Page
14
5.00
15
5.01
16
Use the joystick, moving left/right to select from Off to 8 hours. Press Done or centre press the joystick to return to SETTINGS MENU. Pressing Default restores the following: Power Saving Mode Normal Hibernate Timeout 2 hours
5.02
17
5.03
Red Filter
18
5.04a Data Options for 2-box and 4-box data fields for overlays
(GPS Map MAIN MENU Settings 2/4 Data Box Layout) The following choices of data are available by moving left/right using the joystick and either selecting Done or centre pressing the joystick. The same data options are available for each box in both the 2-box and 4-box layouts. For each data option a summary descriptor is given on-screen.
19
20
(GPS Map MAIN MENU Settings 4 Data Box Layout: lower) For both the Lower Left Box and the Lower Right Box: Use the joystick, moving left/right to select the desired option. Press Done or centre press the joystick to return to SETTINGS MENU. The data options are the same as those listed in section 5.04a for the 2 data box options. Pressing the Default button restores the following settings: Choose Data for Lower Left Time Now Choose Data for Lower Right Location
5.05
21
5.07
Perhaps the most common usage of all grid systems in the UK is the 6-figure grid reference. In the case of the example above the 6-figure grid reference would be (TQ) 159 571
22
(GPS Map MAIN MENU Settings Units and Set Speed) Units Use the joystick, moving left/right to toggle between Miles and feet, Kilometres and metres, Nautical Miles and Knots. Press Done or centre press the joystick to return to SETTINGS MENU.
Target Speed This is the speed on which Estimated Time of Arrival calculations are based. Use the joystick, moving left/right to select the Target Speed from 1 kph (0.6 mph) to 80 kph (50 mph). Press Done or centre press the joystick to return to SETTINGS MENU. Pressing the Default button restores the following settings: Units Kilometres and metres Target Speed 10 kph (6.2 mph / 5.4 kn)
5.08
5.09
23
5.10
24
5.11
25
5.12
26
(GPS Map MAIN MENU Settings Buttons Control) Key Click Sound This function only operates in conjunction with audio-visual Points Of Interest. Hidden Map Buttons This function applies to the GPS Map or PLANNING screens. Use the joystick to toggle between; Two Click operation: click to reveal button function then click again for action. One Click operation: one click activates button instantly. Press Done to return to SETTINGS MENU. Button Handling Use the joystick, moving left/right to toggle between Right Handed and Left Handed operation. Press Done or centre press the joystick to return to SETTINGS MENU. Pressing the Default button restores the following settings: Key Click Sound: Off Hidden Map Buttons: Two Click Button Handling: Right Handed
5.13
5.14
27
(GPS Map MAIN MENU Settings Time Offset) This function allows you to vary the time setting in relation to GMT (eg. for British Summer Time add one hour). Use the joystick, moving left/right to select the time offset. Press Done or centre press the joystick to return to SETTINGS MENU. GPS/UTC time (appears in the on-screen descriptor) is the same as Greenwich Mean Time, GMT. An explanation of UTC is given in section 13.00. Note: The Default button is not enabled on this screen.
5.15
5.16
28
5.18 About
(GPS Map MAIN MENU Settings About) This screen gives details of the software version installed on your unit and Satmap contact details. Press Done to return to the SETTINGS MENU.
5.17
5.18
29
6.00
Page
30
in either 2 or 4 data box overlays (sections 5.04, 5.05 & 5.06). Changing an activated route during a trip will reset the log data. Buttons: Edit Go to ROUTE EDIT page (section 7.02) Enabled when a route is highlighted. View Go to ROUTE MAP page (section 7.03) Enabled when a route is highlighted. Map Return to last map screen Up folder / Select / Activate / No route active Move up to a higher level folder, or when a route is highlighted, toggle between activating it and selecting no route active. Create New Route Go to CREATE ROUTE (section 7.01) Back Return to MAIN MENU (section 4.01)
7.00
31
7.01
Done
32
The menu options on the ROUTE EDIT page are as follows; Edit Title Edit Comments Reverse Route Edit Route Map Edit Waypoints Delete Route Copy Move Route to SD Card* Copy Route to SD Card* *The last two options on the list become available only when a mapcard is inserted.
7.02
(GPS Map MAIN MENU ROUTES MENU Edit Edit Title) Highlight Edit Title, then either press the Edit button or centre press the joystick to access the keypad (section 9.04). First move the cursor up and use the Delete button to clear the default name, My Route 1. Operate the keypad to input a route title (section 7.02) and press Done when finished. The screen will return to the ROUTE EDIT page. If you press Done again, the screen will return to the ROUTES MENU where you will see your new route name listed in place of My Route 1.
33
7.02g Copy
(GPS Map MAIN MENU ROUTES MENU Copy) Highlight Copy, then press Copy and a copy of the route will appear in the routes list.
(GPS Map MAIN MENU ROUTES MENU Edit Edit Waypoints) Highlight Edit Waypoints, press Edit to access WAYPOINTS page. A list is shown, SP is for start point, WP is for waypoint. Highlight the waypoint to be edited and either press Edit or centre press the joystick to access EDIT WAYPOINT page. Edit name/comments using the keypad (section 9.04). There is an option to edit the grid reference and also to edit the map (EDIT ROUTE page, section 7.02b.) The waypoint may also be deleted. Press Back to go to the WAYPOINTS page. Press Back again to go to the ROUTE EDIT page.
(GPS Map MAIN MENU ROUTES MENU Edit Move Route to SD Card) (This option is only available if a map card is inserted). Highlight Move Route to SD Card and either press Move or centre press the joystick. (Subsequently this option becomes Move Route from SD Card). The screen will go to the ROUTES MENU page and an SD card icon will appear by the route name.
(GPS Map MAIN MENU ROUTES MENU Edit Reverse Route) Press Reverse to reverse the route. Press again to go back to the original direction of travel. There is an on-screen statement which says either Currently Forward or Currently Reverse. Alternative ways to reverse the route are via the ROUTE PLAN page (section 7.09a) or the ROUTE CARD page (section 7.09b).
(GPS Map MAIN MENU ROUTES MENU Edit Copy Route to SD Card) (This option is only available if a map card is inserted). Highlight Copy Route to SD Card and either press Copy or centre press the joystick. (Subsequently this option becomes Copy Route from SD Card). The screen will go to the ROUTES MENU page and an SD card icon will appear by the route name.
(GPS Map MAIN MENU ROUTES MENU Edit Edit Route Map) Highlight Edit Route Map, then press Edit to access EDIT ROUTE page. (As distinct from the ROUTE EDIT page, section 7.02). Using the joystick, move the location icon to the edit point on the route. Either press the Add Waypoint button (section 7.01) or centre press the joystick to add a waypoint with a green-headed pin.
Satmap Systems Ltd
(GPS Map MAIN MENU ROUTES MENU Edit Delete Route) Highlight Delete Route, then press Delete to access an option page to delete the route. When either Delete or Cancel is selected, the screen will go to the ROUTES MENU (section 7.00).
34
(GPS Map MAIN MENU ROUTES MENU My Route 1 View Profile) This page shows an elevation profile of the route together with six data fields: Distance Total Ascents Total Descents Maximum Altitude Minimum Altitude Approximate Time The ROUTE PLAN page is accessed from the ROUTE MAP page by pressing the Profile button. Move the joystick left/right to move a vertical line indicating waypoints, details given under the elevation profile. Below a total of fifty waypoints, individual waypoints are shown along the profile. If a route is a 'track', ie. a converted trail, an additional field is shown below the elevation profile giving date, time, speed etc. Buttons: Card Go to ROUTE CARD page (section 7.03b) Go To Go to PLANNING screen (section 6.00), centred on the indicated waypoint Reverse Press to reverse the route
7.03
7.03a
35
7.03b
36
(GPS Map MAIN MENU ROUTES MENU) You will need to be able to import a route from another folder eg. Routes on your desktop. First connect your Active 10 to a computer and open SatSYNC. Using the right pane (SD Card Files) press the Create a new folder button. Enter a name eg. Pub walks. The new folder will not show on the Active 10 until a route is added. Note: In SatSYNC, the name of a folder is followed by a forward slash. The name of a route has a .map extension. To add a route, highlight the new folder and open it by pressing the Open an existing folder button above the pane. Then press Import and select a route. Follow the on-screen instructions. Only files with the extension .map will load into the unit. The File Converter button can be used to convert .gpx files prior to importing a route. Each time a route is added/deleted the unit will sound beeps and default to the Map Packs page while the folder information is updated. Once a route is stored on a card, a folder appears under Active 10 entitled SD Card. Further sub folders are created in the same way.
7.04
37
Buttons: Set Marker/Clear Marker/Create New Route Function varies depending on whether the page was accessed from GPS Map or PLANNING. Map Packs Go to Map Packs page (section 3.01) Map Return to last map screen Set GoTo Set orange locator circle crosshairs as a GoTo point, joined with a straight line route from your current location Add POI Lay down a Point Of Interest, POI (section 9.00) Trail On/Small/Off Toggle between settings: Trail On: large red dots Trail Small: tiny red dots Trail Off: no tracking dots
8.00
38
9.00 POIs
9.00 POI Menu
(GPS Map MAIN MENU POI Menu) A Point Of Interest (POI) is a specific point on the map with some level of detail or information attached. If there are POIs stored on the unit and also on a mapcard, two folders will be shown, called Internal Storage and SD Card. The folders contain POI categories, each of which in turn contains one or more POIs. There are three ways of setting a POI and these are given in section 9.01. When the first POI is laid down, a POI category is automatically created for it. By default it is called My POIs until it is renamed (section 9.03a). Also, the Internal Storage folder is automatically created. POIs may be moved to an SD card (sections 9.03f & 9.03g). When this happens the SD Card folder is automatically created.
9.00
(GPS Map MAIN MENU POI Menu Create New POI) There are three ways of laying down POIs: by map (sections 8.00 & 9.02) by grid reference (section 9.04d) by postcode (section 9.04f)
9.01
39
POI icon
Zoom In
9.02 9.02
40
(GPS Map MAIN MENU POI Menu My POIs Edit Copy) Highlight Copy POI Category and press Copy. You will go to the POI Menu where there is a new entry, Copy of My POIs.
(GPS Map MAIN MENU POI Menu My POIs Edit) This page can only be accessed once a POI has been added. The first time a POI is created, it is automatically stored in a POI category (section 9.00). The menu options are as follows: Rename POI Category Copy POI Category Delete POI Category Set POI Visibility Add New POI by Grid Ref Add New POI by Map Add New POI by Postcode Move to SD Card* Copy to SD Card* (Scroll up/down using the joystick). *Available when a mapcard is inserted.
(GPS Map MAIN MENU POI Menu My POIs Edit Delete) Highlight Delete POI Category and press the Delete button.
(GPS Map MAIN MENU POI Menu My POIs Edit Rename) On the POI Menu highlight the category to be renamed. Press Edit, then Rename. The keypad page appears. Use the joystick to rename the POI category (section 9.04).
9.03
9.04
41
POI Menu
9.04d Add New POI by Grid Ref
(GPS Map MAIN MENU POI Menu My POIs Edit Add New POI by Grid Ref) Press the Add POI button to go to the SETTING page. Use the joystick moving left/ right to go to boxes, then up/down to change box entries. Under the grid reference boxes are the Conversions for the reference shown initially. Once the joystick has been moved vertically (changing the grid reference), these conversions figures are greyed out. Pressing the Convert button will update the conversions.
(GPS Map MAIN MENU POI Menu My POIs Edit Add New POI by Postcode) Press the Add POI button to access the keypad (section 9.03). Enter the postcode. Press Done to re-access the keypad to name the POI, then press Done to return to the POI CATEGORY page.
(GPS Map MAIN MENU POI Menu My POIs Edit Move) (This option is only available if a mapcard is inserted). Highlight Move to SD Card and either press Move or centre press the joystick. (Subsequently this option becomes Move from SD Card). The screen will go to the POI Menu and an SD card icon will appear by the route name.
9.04d
(GPS Map MAIN MENU POI Menu My POIs Edit Add New POI by Map) Press the Add POI button to access the ADD POIs map screen. Use the joystick to move the crosshairs. Fix the POI by either pressing the + button (upper left) or by centre pressing the joystick. The keypad page (section 9.03) appears so you can label the POI. When finished press Done to return to the POI CATEGORY page.
(GPS Map MAIN MENU POI Menu My POIs Edit Copy) (This option is only available if a mapcard is inserted). Highlight Copy to SD Card and either press Copy or centre press the joystick. (Subsequently this option becomes Copy from SD Card). The screen will go to the POI Menu and an SD card icon will appear by the category name.
9.04e
42
POI Menu
9.05 My POIs Page
(GPS Map MAIN MENU POI Menu My POIs Select) (This page is only available once a POI has been added). The My POIs page lists the POIs in a category. Buttons: Edit Go to EDIT POI page (section 9.06) Centre on Map Go to PLANNING screen with the POI in the centre Locate Nearest Go to the PLANNING screen with the POI nearest your last known location in the centre Show Details Go to POI 1 page (section 9.05a) Create New POI Go to the Add New POI page (section 9.01) Back Return to the POI Menu (section 9.00)
(GPS Map MAIN MENU POI Menu My POIs POI 1 Show Details) This page summarises details of the POI. A POI is labelled POI 1 by default until renamed (section 9.06a). POIs are date and time stamped, and the following information is given: Name of the POI (eg. The Welcome Inn) Grid reference (section 5.07) Distance and bearing from current location Elevation Also shown are the POI icon and an eye icon. If the eye icon has a red diagonal line through it, the POI icon is not shown on the map screen (section 9.06f).
9.05
9.05a
43
9.06a Rename
(GPS Map MAIN MENU POI Menu My POIs Select Edit Rename) With the Rename option highlighted, the current name of the POI is given under the options list (eg. POI 1). Press the Rename button to access the keypad to change the name. When using the keypad for labelling, either press Select or centre press joystick to select entries (section 9.04). On the keypad use Shift to access upper case letters. Press Done when finished to return to the EDIT POI menu. Once you have renamed the POI (section 9.04a), POI 1 will be replaced with your new name, eg. The Welcome Inn.
9.06
(GPS Map MAIN MENU POI Menu My POIs Select Edit Edit Description) Use the keypad to type in a POI description (section 9.04). To view the description: Press Done return to EDIT POI page. Press Back go to My POIs (or name of category) page (section 9.04). Press Show Details go to POI 1 (or POI name) page (section 9.04a).
9.06a
44
(GPS Map MAIN MENU POI Menu My POIs Select Edit Edit Warning Radius) Press Edit to access the Warning Radius page. Use the Select button to choose a radius at which the unit will sound warning beeps indicating the vicinity of a POI, Go To point or a route. Before selecting the Edit Warning Radius button, note the current setting displayed on the EDIT POI menu page.
9.06e
(GPS Map MAIN MENU POI Menu My POIs Select Edit Edit Visibility) Press the Edit button to access the Set POI Visibility page. Choosing Set POI as not Visible removes the icon from the map screens but keeps the location as a POI.
(GPS Map MAIN MENU POI Menu My POIs Select Edit Edit Location by Map) On selecting Edit Location by Map, an additional POI icon is shown just inside the locator circle. Use the joystick to move the icon to the new position and confirm either by pressing the Add POI button or by centre pressing the joystick. If you wish to remove the POI icon, press the Remove POI button. Press the Lock to GPS button to return to the last map screen.
9.06g Delete
(GPS Map MAIN MENU POI Menu My POIs Select Edit Delete) To delete a POI from My POIs, press Edit, then Delete. A prompt page asks whether you are sure you wish to delete. Select Delete and go to My POIs, or use Cancel and return to the EDIT POI page.
9.06f
45
46
9.08
POI Indicator
Route Indicator
47
10.00
10.01
10.02
48
11.00 Accessories
11.00 Accessories
Among others, the following accessories are available from the Satmap website: www.satmap.com
(a)
(b)
(available 9th December 2009) The Vehicle Mount has been designed for using the Active 10 GPS unit in motor vehicles. This product will primarily appeal to drivers of off-road vehicles where navigation on accurate topographical mapping is a must. The Mount is a tough unit with a strong vacuum-type suction cup for glass fitting.
(c)
49
11.00 Accessories
(d) Carry Cases (Standard & Deluxe)
The Standard Carry Case has a padded compartment for the Active 10, closed with a Velcro top for fast access, and an elasticated front mesh for additional storage. The Deluxe Carry Case has a main padded compartment for the Active 10 itself and a secondary compartment, ideal for storing spare batteries, map cards, car keys, mobile phone, etc. There are also two mesh pockets on either side. The zips are covered to provide weatherproofing, and an additional elasticated front mesh provides further storage. Both cases can be carried by a 4" belt loop or by the D-Ring fittings on each side designed for use with the Lanyard.
(e) Lanyard
The Lanyard is 1.3m long, branded with the Satmap logo, and is adjustable to fit most requirements. It has two fittings on each end: a metal clip for attaching to the D-Rings on the side of the Carry Cases, or a nylon hoop fitting for attaching directly onto the shoulders of the Active 10 itself.
(d)
(e)
(f)
Satmap Systems Ltd
50
51
13.00 FAQs
Why would I want to set a Go To point? If you are on a route and the weather closes in, you may want to plot an emergency escape route. Set a GoTo point (sections 7.05 & 8.00), which creates a yellow straight line route between your current location and your GoTo point. You can then make your own route follow this route as closely as possible. It is a visual cue as to your emergency exit. A GoTo point is indicated on the map by a green flag; there can be only one! Can the unit be used in a car? Or an aeroplane? Although at the time of printing there is no windscreen mount available, the unit may be used in a car to show your location. Of course, no directions are given! The maximum operating forward speed of the unit is 780 mph, so it can be used in an aircraft (subject to operators regulations). When Im stationary, why does my Active 10 trip log show increasing distance? In the basic method of triangulation, small system errors give rise to something called the Circular Error Probability (CEP) value which determines the radius of a circle containing 50% of the GPS readings; this is one of the elements used by the unit in calculating its position. The more visible satellites there are, the smaller the CEP value and the more accurate the position given. Within a certain radius, the location pinpointed may vary slightly from one second to the
Satmap Systems Ltd
next despite no forward movement. This incremental movement is cumulative. With forward motion of more than 2kph, the GPS location given is very accurate. (Car GPS navigation systems disguise these effects; they use a road navigation database to draw road images, as opposed to accurate cartographic images, and use filtering to lock the position to a road.) How do I remove the screen cover? This needs to be done with care! The screen cover is held in place by three lugs. Using fingernails or a small screwdriver, first prise loose the top lug (central position, under the GPS logo). Then prise loose the two side lugs (just above the side buttons), one at a time. When replacing the new cover, reverse the sequence of lugs, pressing each firmly into place. Note: When the cover is off, take care not to scratch or unnecessarily expose to moisture, the screen beneath. Any debris eg. fluff, fibre or dust on the screen should be removed with extreme care.
52
14.01 Tips
Do not use alcohol wipes to clean the screen as this will cause damage. In order to preserve your screen cover for as long as possible, avoid contact with alcohol, oils and excessive heat. Always use a very soft cloth to clean. Ensure the map card is dry before inserting it into the unit. To prevent the screen inadvertently switching from GPS Map to PLANNING, either lock the screen (section 2.07), or allow it to go into the powersave screen off mode before stowing it away. For best performance in acquiring satellite lock, wait until lock is established before inserting a map card. To maximize battery life; 1. Use the screensave (Automatic Screen Turn Off) mode which switches off the screen but keeps the GPS running. 2. Try to minimize the backlight setting as far as is practical. If you want to carry out route planning on your Active 10, a good way to get more out of your batteries is to connect the unit to your pc or laptop. When not using the Active 10, it is recommended that you take out the batteries. Even with the unit switched off, there is a small power draw which, over time, can flatten the batteries.
Remembering to use the Stop (data logging) button (section 4.03) is useful if you want a break and yet maintain a log of all trip statistics. Dont forget to press Start once you are ready to go again, especially if it was a pub break! If you do not press Stop and you are stationary for a period of time, a snail trail scribble will develop as the unit hunts (section 11.00). To plan a route from a given set of grid coordinates: On the PLANNING screen, go to the approximate area of the walk/activity. Go to ROUTES MENU (side button, lower left) and select Create New Route. The data box overlay gives the coordinates for the location of the crosshairs. Using the joystick, move the crosshairs until you have the desired grid coordinates showing and either press the add waypoint button (side button, upper left) or centre press the joystick. Once all waypoints have been added, press Done. It is recommended that you make a back-up file copy of any maps that you purchase. Back-up may be done either using a card reader or an SD card slot on your computer. If your map card data is corrupted or erased, copy the file back onto the original card. Data transferred to a different card will not be usable.
53
14.01 Tips
The Active 10 is capable of acquiring lock on the move, even whilst driving. However this can cause a delay in the time to get a lock so it is advisable to allow the unit to get a fix whilst stationary. Rangefinder functions: Short range: On the PLANNING screen, the blue locator circle which depicts your position in the centre of the GPS Map screen, is still active and shows you advancing across the screen. The data overlay shows the distance from the blue locator circle (your location) to the orange locator circle which is now the centre of the screen, eg. position the orange circle at a target destination and follow progress of the blue circle as you walk towards the target. Long range: On moving the joystick, the GPS Map screen switches to PLANNING. The data overlay includes the distance from where you last had GPS lock. This is also useful in a variety of scenarios, eg. showing distance to the next waypoint, or in the car, distance to the next motorway services. Use a GoTo point as a rangefinder: Set a GoTo point on your destination (section 8.00). Press Lock to GPS (front left button) to return to the GPS Map screen. Select a data box overlay (section 3.00) and select GoTo Dist (section 5.04a). The data overlay will now show a straight line distance from your current location to the GoTo point.
Satmap Systems Ltd
It can be useful to combine the advantages of screensave mode (automatic screen turn off, section 5.01) with the keypad lock (section 2.07). Whilst the unit is stowed the screen cannot be activated (even if the power button is pressed it will be activated only for the preset time until the screen switches off). To reactivate the unit, press the power button and select unlock. Remote rangefinder: Marker This function allows you to find the distance between two points. From either GoTo and Marker Menu (section 10.00) or POSITION INFO (section 8.00), set a marker (red flag) and then move the joystick; a red line is drawn from the marker to the point selected. The overlay shows the grid ref and altitude of the point selected, plus the distance and bearing to the point.
54
15.00 Glossary
15.00 Glossary
Active map The map on a card which is in use (there can be more than one map present). Active route Shown as a highlighted yellow line to follow on the map. Asc Abbreviation for ascended height. Atomic clock A type of clock that uses microwave signals emitted by electrons as its timekeeping element. It is the most accurate time standard and is used to control the frequency of GPS satellite signals. Bearing Direction from one object to another. CEP (Circular Error Probability) Determines the radius of a circle containing 50% of the GPS readings. Cross Track Error The difference in distance between a planned route and your location. EGNOS The European Geostationary Navigation Overlay Service has been developed by the European Space Agency (ESA) for safety of air navigation. It is part of the Galileo project. When a signal is available (which is only in the south of England and mainland Europe), this signal improves the accuracy of signals from the GPS system. Electronic compass This doesnt rely on GPS signals and works whilst stationary. Whilst moving, the GPS compass is more accurate. Galileo A planned global navigation satellite system, being built by the European Union and European Space Agency as an alternative for the US Global Positioning System (GPS) and the Russian GLONASS system. Having already cost 3.4 billion the project was abandoned by the private sector group European Satellite Navigation Industries in 2007 and was taken over by the EU. The project is expected to be completed in 2013. GLONASS A radio-based satellite navigation system, developed by the former Soviet Union and now operated for the Russian government by the Russian Space Forces. After completion, the system fell into disrepair with the collapse of the Russian economy. In 2001 Russia committed to restoring the system with a goal of full restoration by 2009. GoTo point A set point which acts as a target. It is on a straight line from your current location and the yellow highlighted route is a rough guide only, eg. an emergency route off the hill in worsening weather. GMT (Greenwich Mean Time) The local time at the 0 meridian passing through Greenwich. GPS The Global Positioning System is the only fully functional Global Navigation Satellite System in the world. Created in the US it utilizes a constellation of 24 Earth Orbit satellites that transmit precise signals. The system enables a GPS receiver to determine its time, location, speed and distance. GPS compass Whilst stationary the unit cannot determine which direction you are facing. If you have a GPS reading from two locations you can determine the direction of travel. Grid Magnetic Angle The horizontal angular difference between Grid North and Magnetic North. It is this angle which needs to be applied when converting between magnetic and grid bearings. Grid North The direction of a grid line which is parallel to the central meridian on the national grid. Heading Direction you are travelling. Hibernate mode An ultra low power state giving significantly extended battery life and a rapid GPS aquisition.
55
15.00 Glossary
Inactive route Shown as a grey highlighted line on the map. Knot One nautical mile per hour. Magnetic North The direction indicated by a magnetic compass. Magnetic North moves slowly and is currently West of Grid North in Great Britain. Meridian A line of longitude. MGRS Military Grid Reference System, used by NATO countries. It is derived from the UTM grid system but uses a different labeling convention. It does not describe a point, but rather an area. Mil-radians The military use mil-radians (short for milliradians) because breaking down a circle into 6400 mil-radians rather than 360 degrees allows greater accuracy. Nautical mile Distance corresponding to one minute of arc of latitude along any meridian, 1852m. A mile (statute mile) is 1609m. POI A Point Of Interest. Route A planned route is shown on the unit as a series of transparent yellow lines going from waypoint to waypoint. Satellite A GPS satellite is a satellite used by the NAVSTAR (NAVigation Satellite Timing and Ranging) Global Positioning System (GPS). The first satellite in the system, Navstar 1, was launched February 22, 1978. SD Card Secure Digital card (1MB 4GB). SDHC is Secure Digital High Capacity (4GB 32GB), which has a different internal format. In the manual these are also referred to as mapcards since they are pre-loaded with digital mapping. Soft keys Buttons whose functions vary depending on which screen is displayed. Target speed The speed on which Estimated Time of Arrival calculations are based. Toggle function Allows users to select which map they want to view at a particular point without zooming in or out all at the press of a button. Suitable map card and software v1.4 required. Toggleable maps A Toggle enabled map card containing more than one scale or map type of a particular area. Track A Trail that has been trodden and saved. Trail The path which has been trodden. Trail Up The map is orientated to match the ground ahead of you. Trip Log Records trip data. True North The direction along the earths surface towards the geographic North Pole. UTC (also GMT and Zulu time) The worldwide standard for time is coordinated universal time, abbreviated UTC. This was formerly known as Greenwich Mean Time, GMT. UTC is a high precision atomic time standard also referred to by the military and civil aviation as Zulu time (Z). The abbreviation is a compromise between CUT (Coordinated Universal Time) and TUC (Temps Universel Coordonn). UTM The Universal Transverse Mercator coordinate system is a grid based method of specifying locations.
56
15.00 Glossary
VGM Velocity Made Good is the effective velocity towards a target, after the effects of crosswinds (especially relevant to aircraft), currents (watercraft) and terrain (walkers/ cyclists who have planned on walking at a certain speed) have taken effect. It is the forward component of velocity. WAAS Wide Area Augmentation Sysytem. This is a GPS augmentation system in the U.S. which enhances the accuracy of GPS. Warning Radius Distance at which the unit will sound beeps indicating the vicinity of a POI, GoTo point or a route. Waypoint A location typically associated with a distinctive feature; a series of waypoints are used to help define a route.
57
Tel: +44 (0)845 873 0101 Fax: +44 (0)845 873 0104 Email: support@satmap.com www.satmap.com