Académique Documents
Professionnel Documents
Culture Documents
Description and general specifications Operating instructions and maintenance Finished product quality control tests
02 06 06
Casing : weather proof light metal alloy, stove enamel finished, suitable for outdoor mounting Protection degree : IP 54.
Insulation test : 2000V 50Hz between terminals and earth for a 60 sec. time. Working temperature : all the magnetic oil level gauge are suitable for working with: oil temperature between -25C / + 120C ambient temperature between -25C /+ 60C Float movement : this may be in the radial direction (type B) or in the axial direction (type A)
Microswitches making & breaking capacity : 3A 125/250V AC (resistive) 0,5A 125V DC for inductive load L/R= 40ms 0,25A 250V for inductive load L/R= 40ms
Type L140
3 0
Type L 220 L 340
S 76
2230'
24 53
N.HOLES D2
O-RING
MAX
+85
OIL LEVEL
120
60
D1
D
+20
LIVELLO OLIO
CENTRE OF CONSERVATOR
-20
MIN
DIAMETER OF CONSERVATOR
58
GH T
DC
VA
RI A
BL
EL
EN
58
PG 16
s 24 24 24
L N. holes Weight R standard 245 6 1,9 kg. max 370mm. 325 8 2,9 kg. max 550mm. 445 8 6 kg. max 710mm.
Type L140
30
Type L 220 L 340
90
53 24
2230'
N.HOLES D2
Type L140
30
Type L 220 L 340
O-RING
90
53 24
MAX
+85
OIL LEVEL
2230'
120
60
D1
D
N.HOLES D2
+20
LIVELLO OLIO
LE N
GH T
O-RING
RI
AB
LE
-20 +85
60
D1
+20
LIVELLO OLIO
58 LE N
GH T
DC
DIAMETER OF CONSERVATOR
-20
MIN
VA
RI
AB
LE
58
DC
DIAMETER OF CONSERVATOR
58
PG 16
Type D LB140 140 LB220 220 LB340 340 Type D LB140 140 LB220 220 LB340 340
58
s 24 24 24 s 24 24 24
D1 O-ring 125 OR 186(6362) 190 OR 221 305 OR 248(8100) D1 O-ring 125 OR 186(6362) 190 OR 221 305 OR 248(8100)
d2 L N. holes 7 245 6 11,5 325 8 18 445 8 d2 L N. holes 7 245 6 11,5 325 8 18 445 8
WEIGHT 2,3 kg. 3,3 kg. 6,3 kg. WEIGHT 2,3 kg. 3,3 kg. 6,3 kg.
R standard max 370mm. maxPG 16 550mm. max 710mm. R standard max 370mm. max 550mm. max 710mm.
L
120
OIL LEVEL INDICATORS type LB - axial float Must be mounted exactly in the centre of the conservator and the length of the float stem = R can be calculateted by using the formula : R=(0,5DC -10) x 1,15 DC=conservator diameter dimensions =mm.
Maintenance : On regular basis check the functionality of the device by manually rotating the indicator disc thus verifying the correct commutation of the contacts. The manual rotation must be made very slowly to avoid disconnection of the magnetic field ! Being the transparent made of polycarbonate, when cleaning use a soft cloth and soapy water.
Dimensional check. Hydraulic test for tightness of the finished gauge : the test is carried out by mounting the oil level gauge on a tank filled with oil at the temperature of 90C and at the pressure of 200 kpa. Said test lasts 4 hours. During this period no oil leakage is admitted.
Check of instrument mechanical protection degree : IP 55. Isolation test : carried out by means of a microprocessor controlled testing unit.
Terman '90 S.r.l., Via Ghisalba, 13-20/21, 20021 Bollate (MI) Italy. Tel: +39 02 38 30 37 12, Fax: +39 02 38 30 37 19, E-Mail info@terman.com, www.terman.com C.F./P. IVA IT 09970270154 C.C.I.A.A. 1332904 Trib. Milano Reg. Soc. 302729 Cap. Soc. 119.000
Manual and hydraulic inspection of the electric contacts actuation : this test is carried out both on minimum and maximum levels circuits. Its performed by means of visual indicators mounted on a panel-board.