Vous êtes sur la page 1sur 6

1. Choose the L3 Network device.

A. Hub.
B. Router
C. NIC.

2. You are an administrator in a company that has Windows 2000 professional systems. Your
users have been installing unsupported USB drivers on to their systems causing them to lock
up and fail. You want to insure that only drivers that are in the HCL can be installed. What
must be done? (Choose 2)

A. Ignore - Install all files, regardless of file signature


B. Warn - Display a message before installing an unsigned file
C. Block - Prevent installation of unsigned files
D. Apply setting as system default

3. Sandy has a Windows 2000 Professional system. Today she is visiting another department,
and is using a Windows 2000 system. She wants to print a document but is missing her
printer. You want her to be able to print from any computer she logs in at. What can you do
to insure that she has this ability?

A. Create a roaming profile


B. Create a mandatory profile
C. Create a local profile

4. You are an administrator of your company's network. You want to perform routine
upgrades on your Windows 2000 Server computer. You use your non administrator user
account in the domain to log on to the server. You want to update all of the critical system
files and patches on the server in the shortest possible time. What should you do?

A. Run Windows Update.


B. Run System File Checker.
C. Log on as an Administrator and run Windows Update.
D. Log on as an Administrator and run System File Checker

5. What is the 7th Layer?

A. Data Link.
B. Application.
C. Transport.
D. Presentation.

6. What is the 127.0.0.0 IP range?

A. Convert the partition to NTFS.


B. Used for Internal communication.
C. Class A IP address.
D. Class B IP address.

7. Which Layer works with TCP?


A. Data Link.
B. Application.
C. Transport.
D. Network.

8. You are the administrator of a Windows 2000 Server computer. The computer is
configured to have a single 18-GB drive, which contains the operating system files. This
drive also contains a shared folder where five network users store their Microsoft Excel files.
You want to prevent each network user from using more than 1GB of space in the shared
folder. Which action or actions should you take to achieve this goal? (Choose all that apply)

A. Create a quota entry for everyone account. Set the quota limit to 1 GB.
B. Enable disk quotas on the volume.
C. Set the default disk quota limit to 1 GB.
D. Select the Deny disk space to users exceeding quota limit check box.
E. Upgrade the disk to a dynamic disk.

9. Which Layer works with IP/IPX?

A. Data link.
B. Presentation.
C. Network.
D. Router.

10 You want to configure Network Adapter for communications to and from the Windows-
based client computers exclusively. Which checkbox or boxes in the Local Area Connection
Properties dialog box should you select? Choose all that apply.

A. Gateway (and client) Services for Netware.


B. Client for Microsoft Networks.
C. File and Printer Sharing for Microsoft Networks.
D. NWLink NetBIOS.
E. NWLink IPX/SPX/NetBIOS Compatible Transport Protocol.
F. Internet Protocol (TCP/IP

11. Your computer is configured to dual-boot between Windows 98 and Windows 2000.
How would you configure the computer so that Windows 98 would be the default selection if
the user did not make a choice within the specified amount of time?

A. Through the STARTUP.INI file


B. Through the SYSTEM.INI file
C. Through Control Panel, Startup Options
D. Through Control Panel, System, Startup and Recovery

12. You encrypt three files to ensure the security of the files. You want to make a backup
copy of the three files and maintain security setting. You have the option of backing up to
either the network or a floppy disk. What should you do?
A. Copy the files to a network share on a NTFS volume. Do nothing further.
B. Copy the files to a network share on a FAT32 volume. Do nothing further.
C. Copy the files to a floppy disk that has been formatted by using Windows 2000
Professional. Do nothing further.
D. Place the files in an encrypted folder. Then copy the folder to a floppy disk.

13. Which protocol works on layer 3--network layer—of the OSI model?
A. IP
B. NCP
C. SPX
D. NetBIOS

14. Which port works with www?

A. Port 80.
B. Port 24.
C. Port 25.
D. Port 110.
15. Which port works with SMTP?
A. Port 21.
B. Port 53
C. Port 110.
D. Port 25.

16. You install Terminal Services on a Windows 2000 domain controller. You install
Terminal Services Client on users' client computers. Users report that when they try to
connect to the Terminal server, they receive the following error message: "The local policy
of this system does not allow you to logon interactively." When you attempt to log on to the
Terminal server as an administrator from a user's computer, you log on successfully. You
want users to be able to log on to the Terminal server. What should you do?
A. Grant the users the right to log on as a service.
B. Grant the users the right to log on locally.
C. Grant the users the right to log on over the network.
D. Copy the users' profiles to the Terminal server.
E. Copy the users' home folders to the Terminal server.

17. You install your boot volume on volume C on your Windows 2000 Server computer. You
mirror volume C on dynamic Disk 1. Two years later, during routine server maintenance, you
open Disk Management and find that the status of volume C is Failed Redundancy. The
status of Disk 1 is missing. You attempt to reactivate Disk 1, but the status of volume C does
not return to Healthy. What should you do next?

A. Replace Disk 1 and restart the computer. The mirror will automatically regenerate.
B. Remove the mirror on Disk 1, replace the disk, and then add back the mirror to the new
Disk 1.
C. Replace Disk 1 and copy all data from volume C to a new NTFS primary partition on the
new Disk 1. Restart the computer.
D. Rescan the disks, remove the mirror, and delete the data on Disk 1. Then re-create the
mirror.

18. After you install a new video adapter, one of the users at a remote location reports that
Routing and Remote Access does not accept calls. After you resolve the Routing and
Remote Access problem, you need to configure the server to prevent users from installing
any unsigned device drivers. What two actions should you take in the Driver Signing Option
dialog box? (Choose two)

A. Set File Signature Verification to Ignore


B. Set File Signature Verification to Block
C. Set File Signature Verification to Warn
D. Select the Apply settings as system default check box

19. Server1 wants to talk to Server2; Which IP address is default gateway for Server1, select
the answer.

IP2 IP3
Server 1 Router Server 2
IP4
Server Server
IP 1
A. IP1
B. IP2
C. IP3
D. IP4

20. You have 6 domain controllers’ srv1, srv2, srv3, srv4, srv5, srv6, in three main
segments. You back up all System State data of your network. The tape device is attached to
srv1. To which server can you restore the System State data?

A. Any server.
B. Any server that is on the same segment of srv1.
C. Any server on a different segment than srv1.
D. Only to server srv1.

21. What is the maximum number of processor that a Windows 2000 Professional computer
can support?

A. One
B. Two
C. Four
D. Eight

22. Your accounting department has 20 users. You purchase 20 identical computers for the
department to use. You install Windows 2000 professional onto each computer. The
computers will be shared by the members of the accounting department. You want each user
in the department to be able to keep their individual desktop settings no matter which
computer they are using. What is the easiest way to do this?

A. Configure each computer to join a workgroup. Create a group names accounting and add
each user to it.
B. Configure each computer to join a workgroup. Create a domain user account that uses
roaming user profiles.
C. Configure each computer to join a domain. Set everyone's home directory to the same
directory.
D. Configure each computer to join the domain. Create a domain user account that uses
roaming user profiles.

23. What file systems are supported by Windows 2000 Professional? (Choose three)

A. NTFS
B. NFS
C. FAT
D. FAT32
E. TCP/IP
F. UNIX

24. Your have a Windows 2000 Professional computer. It has one NTFS partition. You have
a compressed directory containing a file name "Taxes.doc". This file is uncompressed. You
move the file to a compressed directory. What happens to the file?

A. It becomes compressed.
B. It remains uncompressed.
C. All NTFS permissions become reset and it becomes compressed
D. All NTFS permissions become reset and it remains uncompressed

25. When a computer running Windows 2000 Professional is locked, which of the following
happen? (Choose two)

A. Applications continue to run.


B. Services continue to run.
C. All users that are logged onto the machine become disconnected.
D. All processes are stopped.

26. You install Windows 2000 Professional onto a computer. What networking components
are installed by default onto this computer? (Choose Three)

A. NetBEUI
B. TCP/IP
C. File and Printer Sharing for Microsoft Networks
D. IPX/SPX
E. RIP
F. Client for Microsoft Networks.

27. What is the POP3 Port No.?

A. 21
B. 30
C. 110
D. 115

28. What is the maximum amount of memory that Windows 2000 supports?

A. 2GB
B. 4GB
C. 8GB
D. 16GB

29. What is the minimum amount or memory recommended for installing Windows 2000
Professional?

A. 32MB
B. 64MB
C. 128MB
D. 32MB if ECC RAM

30. Which of these operating systems can be directly upgraded to Windows 2000
Professional?

A. Windows 95
B. Windows 98
C. Windows 3.1
D. Windows NT 4
E. Windows N.T 3.51
F. Windows 3.11

Vous aimerez peut-être aussi