Académique Documents
Professionnel Documents
Culture Documents
&
General Service, Chemical, Petrochemical, Oil and Gas, Refinery, Energy, Pharmaceutical, Food & Beverage, Cosmetics, Semiconductor Water, Gas, Steam, Chemicals, Solvents, Thermal Fluid Vacuum 10-6 torr to 210 bar (3000 psig) -40C to 350C (-40F to 660F) Carbon Steel, Stainless Steel, Hasteloy-C, Alloy-20, Monel, Duplex Screwed, Socket & Butt weld, Flanged, Clamp, Compression Fitting Firesafe to API 607 4th Edt. and BS 6755 Pt 2 Hand or Gear operated, Pneumatic or Electric Actuated
The 46 and 47P Series are the main lines of HABONIM 3-piece ball valves for industrial applications. The valves are suitable for applications requiring high flow capacity and tight shutoff, where reliability, functionality and interchangeability are essential for the product quality. HABONIM has various valve solutions and designs that give the end user the freedom of choice for the toughest requirements imposed by the industry and by international standards.
Visual Indication of valve position NAMUR interface enables mounting of compatible solenoid Threaded holes for additional instrumentation
Blowout proof stem with optional firesafe and Antistatic device A large range of end connections for Full or Reduce bore valves
Various type of seat designs and materials including characterized metal seats for control applications
Valve Construction
The rigid valve body construction is designed in accordance with ANSI B16.34 and BS 5351. The 47P series valve bodies have a top mounting flange conforming to ISO 5211 with centering ring for direct mounting of actuators, limit switches, fugitive emission bonnets or extended handles. The 46 series valve bodies do not have an ISO top mounting flange and they carry a different wrench (see page 10).
End Connections
HABONIM has many types of end connections to suit most customer requirements. The standard types are screwed, welded or flanged connections.
Screwed Ends
Screwed ends are identified by a marking on the end face: BSPT - no identification NPT - concentric groove BSPP DIN 2999 - external chamfer Other screwed ends identification will be advised on request.
CLOCKWISE TO CLOSE
The 3-piece body construction enables valve in-line maintenance and replacement of internal parts. The standard 47P valve bodies have through body bolts. The Firesafe valves have threaded body screws. With the ISO mounting flange there is no need to loosen body bolts when fitting actuators. The 47P & 46 series ball, seats and seals are interchangeable with HABONIM flanged 31/32 series reduced bore valves and with HABONIM flanged 73/74/78 series full bore valves up to and including 2. Stem assemblies are interchangeable through out.
Flanged Ends
Flanged ends complying to class 150 ANSI B16.5 and DIN 3202 F1 face-to-face dimensions are available in reduce or full bore. In some cases ANSI flange end valves will comply to class 300 face-to-face dimensions only.
Other Ends
Other available ends are Clamp ends for the Biopharm and Food industry, Compression Fitting ends for Instrumentation and the Semiconductor industry, Extended Pipe ends for the Chemical industry. Other ends are available on request. Please refer to Bulletin C-515 for dimensions.
Screwed
Buttweld
Socket weld
Flange
Extended Tube
Clamp
Compression Fitting
Page 3
Body Seals
Metal Ring
The Metal Ring Encapsulated Groove design uses a thinner body seal supported by a metal ring and is used in the standard body. It provides tighter compression of the body seal for higher pressure and temperature fluctuations. It also serves a barrier for all flexible graphite body seals from penetrating into the valve body.
Ball Material
A highly polished solid ball ensures tight shutoff and long service life. All balls are solid and have specially rounded leading edges to eliminate excessive seat wear during rotation. The balls have a hole in the stem slot to equalize pressure behind the ball in the valve cavity (see illustration below). Standard ball materials are 316 Stainless Steel, Hasteloy-C, Monel, Alloy-20, Duplex and Inconel. All materials (except 316 SS) are marked in the slot for identification. Other ball designs such as diverter balls, cavity pressure relief balls with a vent hole to the upstream side, characterized port balls for control applications, balls for flushing body cavity and more are available on request (see illustrations below).
Equalizing pressure hole in slot Upstream pressure relief hole Characterised port for control T-Port for flushing
Encapsulated Groove
The fully Encapsulated Groove body serves the same purpose as the Metal Ring design, only the groove is machined in the valve body. This body construction utilizes the same seals without the metal ring.
Page 4
Stem Assemblies
All valves have blowout-proof stems. The stem assembly incorporates live loaded springs to compensate for pressure and temperature surges and wear. A tab washer ensures that the stem nut will not loosen during cyclic operations. The stem is machined with a high surface finish for better sealing capability. Optional stem seal materials and shapes are available. Special High Cycle stem arrangements are available for specific applications.
A precision machined blowout-proof stem is inserted into the valve body from within. Available as standard, antistatic or firesafe. The firesafe stem has a special contour for metal to metal contact in the event of fire. Stems 1/2 to 21/2 output shaft are double D. Stems 3 and above have square shaft.
Firesafe Stem
Antistatic Device
Antistatic stem device to discharge static electricity buildup on the ball are optional. This conforms to BS 5351 for continual electrical contact between ball/stem and stem/body. Contact is made by a spring loaded stainless steel element inserted in the stem or a conductive PTFE stem seal. Valve sizes up to 2 require a stem/body contact, while larger size valves also need a ball/stem contact.
V-ring or sandwich style stem seals are some times more efficient for applications such as high cycle or where it is essential to have low emissions. These seals can be fitted into the standard valve body.
Page 5
This seat withstands higher temperatures and pressures than glass filled PTFE, has good resistance under load, not recommended for foodstuff Identification: Color blue.
UHMWPE is mainly used where PTFE is not acceptable. It has high radioactive resistance of 2 x 10 rads. Other typical applications are the tobacco industry, H2SO4 and the handling of highly abrasive media. Identification: Color pale white with green stripe.
Standard seat with slots Diverter seat/seal Cavity Filler seat Characterized metal seat
Delrin(Acetal Resin)
Habonim has a line of metal seated valves for severe service applications where high temperature, abrasion and/or corrosion restrict the use of soft seats. Please refer to Habonim Bulletin T-624 for additional information on seat materials and pressure temperature limits.
Delrin is used for high pressure applications where resistance to wear and deformation under load is essential. It is mainly used in the Petroleum industry. Its maximum temperature is limited to 80C (176F) under full load. Delrin must not be used in presence of OXYGEN. Identification: Color creamy white with black stripe.
T PTFE
PTFE is the material of choice where the characteristics of low friction, high durability, excellent thermal resistance or chemical inertness are required. Recommended for use with water, foodstuff or corrosive chemicals. Identification: Color white.
PEEK (Polyetheretherketone) is a tough, high temperature, semicrystalline thermoplastic offering excellent characteristics such as high tensile strength and elongation properties, excellent shear strength and creep resistance, outstanding fatigue and chemical resistance, no susceptibility to hydrolysis (Steam/Hot Water). Identification: Color black with yellow stripe.
Virgin PEEK
R J
Virgin PEEK has no fillers and comprises similar physical characteristics as filled PEEK . It has higher radiation resistance and is suitable for food, tabacco and pharmaceutical applications. Identification: Color beige.
Glass filled PTFE has virtually the same chemical compatibility as virgin PTFE but extends the pressure/temperature rating of the valve. Its superior compression and heat resistance provide the seat good wear resistance at high loads and is particularly good for steam application. Available with glass fibre content of 15% (R) or 25% (J). Identification 15% GF: Color off-white with blue stripe. Identification 25% GF: Color off-white with red stripe.
Vespel
Vespel is a polyimide material that has high temperature capabilities under load and is mainly used for heat transfer applications, hot gases and oils. Vespel must not be used in with STEAM or media containing WATER or WATER VAPOR. Identification: Color brown.
NRG seats are suitable for elevated temperatures, resistance under high pressure loads, low coefficient of friction and are suitable for many corrosive applications. They are available in two different profiles to suit both steam or thermal fluid at high temperature and cryogenic applications. Identification: Color charcoal black with white stripe.
PCTFE (Kel-F)
PCTFE material, better known as Kel-F (Chloro Tri Floro Ethylene ) is used extensively for cryogenic services for temperatures down to -196C (-320F) to 121C (250F). Its main applications are for gas production, transportation and storage. Identification: Color see through white.
Page 6
This seat withstands higher temperatures and pressures than glass filled PTFE, has good resistance under load, not recommended for foodstuff Identification: Color blue.
UHMWPE is mainly used where PTFE is not acceptable. It has high radioactive resistance of 2 x 10 rads. Other typical applications are the tobacco industry, H2SO4 and the handling of highly abrasive media. Identification: Color pale white with green stripe.
Standard seat with slots Diverter seat/seal Cavity Filler seat Characterized metal seat
Delrin(Acetal Resin)
Habonim has a line of metal seated valves for severe service applications where high temperature, abrasion and/or corrosion restrict the use of soft seats. Please refer to Habonim Bulletin T-624 for additional information on seat materials and pressure temperature limits.
Delrin is used for high pressure applications where resistance to wear and deformation under load is essential. It is mainly used in the Petroleum industry. Its maximum temperature is limited to 80C (176F) under full load. Delrin must not be used in presence of OXYGEN. Identification: Color creamy white with black stripe.
T PTFE
PTFE is the material of choice where the characteristics of low friction, high durability, excellent thermal resistance or chemical inertness are required. Recommended for use with water, foodstuff or corrosive chemicals. Identification: Color white.
PEEK (Polyetheretherketone) is a tough, high temperature, semicrystalline thermoplastic offering excellent characteristics such as high tensile strength and elongation properties, excellent shear strength and creep resistance, outstanding fatigue and chemical resistance, no susceptibility to hydrolysis (Steam/Hot Water). Identification: Color black with yellow stripe.
Virgin PEEK
R J
Virgin PEEK has no fillers and comprises similar physical characteristics as filled PEEK . It has higher radiation resistance and is suitable for food, tabacco and pharmaceutical applications. Identification: Color beige.
Glass filled PTFE has virtually the same chemical compatibility as virgin PTFE but extends the pressure/temperature rating of the valve. Its superior compression and heat resistance provide the seat good wear resistance at high loads and is particularly good for steam application. Available with glass fibre content of 15% (R) or 25% (J). Identification 15% GF: Color off-white with blue stripe. Identification 25% GF: Color off-white with red stripe.
Vespel
Vespel is a polyimide material that has high temperature capabilities under load and is mainly used for heat transfer applications, hot gases and oils. Vespel must not be used in with STEAM or media containing WATER or WATER VAPOR. Identification: Color brown.
NRG seats are suitable for elevated temperatures, resistance under high pressure loads, low coefficient of friction and are suitable for many corrosive applications. They are available in two different profiles to suit both steam or thermal fluid at high temperature and cryogenic applications. Identification: Color charcoal black with white stripe.
PCTFE (Kel-F)
PCTFE material, better known as Kel-F (Chloro Tri Floro Ethylene ) is used extensively for cryogenic services for temperatures down to -196C (-320F) to 121C (250F). Its main applications are for gas production, transportation and storage. Identification: Color see through white.
Page 6
47P
&46 Series
T PTFE
lb/in
2
A TFM
1/2
P NRG
lb/in
2
bar
110 100 90
bar
110 100 90
- 2
1600
A TFM T PTFE
- 2
1400 1200
80 70 60
1/2
- 2
Pressure
80 70 60
Pressure
1000 800
T
21/2 - 4
1000 800
21/2 - 4
50 40 30 20
P
Thermal Fluid
10 0 bar
230
lb/in 0
230
lb/in 0
300 350
320
C -30
50
100
150
200
250
C -30
50
100
150
200
250
300
350
Temperature F -22 0 50 100 150 200 250 300 350 400 450 500 550 600 650 662
Temperature F -22 0 50 100 150 200 250 300 350 400 450 500 550 600 650 662
S VESPEL
lb/in
2
K L PEEK
Y Delrin
lb/in
2
U UHMWPE
bar
220 210 200
1/2
bar
220
1/2
3300 3200 3000 2800 2600 2400 160 2200 2000 1800 1600 1400 1200 1000 800 50 600 400 200 40 30 20 10 0 bar
260 350
3300
- 2
- 2
U UHMWPE Y DELRIN
160 2200 2000 1800 1600 1400 1200 1000 150 140 130
Pressure
Pressure
Y
- 2
21/2 - 4
21/2 - 4
lb/in 0
lb/in 0
8093
C -30
50
100
150
200
250
300
350
C -30
50
100
150
200
250
300
350
Temperature F -22 0 50 100 150 200 250 300 350 400 450 500 550 600 650 662
Temperature F -22 0 50 100 150 200 250 300 350 400 450 500 550 600 650 662
Firesafe Valves
The AF series Fire Safe valves are designed and tested to the requirements of API 607 4th Edition and to BS 6755 Part 2 specifications. The valves contain soft seat rings. In the event of fire, a secondary metalic machined ring comes in contact with the ball and prevents leakage through the valve port. The stem incorporates a machined ring shaped surface which will prevent leakage, once the thrust seal has been burned off. All firesafe valves are fitted with flexible graphite body seals and graphite stem seals. Bulletin: P - 115
Cryogenic Valves
The C series valves for cryogenic service applications are used for speciality gas production, food industry, metallurgy, transportation and other. With a precision welded body and extended bonnet, one piece high tensile stem, PCTFE or NRG seat material and V-shape stem packing, the valves can operate at temperatures down to -196C (-320F) and pressures up to 100 bar (1500 psi). All cryogenic valve balls have an upstream pressure relief hole to prevent buildup of pressure in the body cavity. Bulletin: P - 119
Control Valves
The N series V-port control valves are used in many industrial processes such as steam, pH, pressure, temperature and other control applications. The specially mate-lapped hard coated ball and characterised metal seats, matched ball and stem, direct ISO mounting pad and fastened adaptor mounting kit provide reduced hysteresis, precise control and tight shuttoff. A wide range of end connectors are available together with various types of seat and seat materials. Bulletin: P - 411 (characterized & round port)
Clean Valves
The Habonim line of Clean Valve applications include the Semiconductor, Pharmaceutical, Biotechnology, Food and Beverage and Cosmetic industries. Special body and trim material selection, machining procedures, assembly and testing in a class 1000 cleanroom are some of the valve specifications. The I series High Purity valves for the Semiconductor industry including the FDS (Fluid Distribution Systems) lateral valves are well proved worldwide. High Purity Ball Valves, 67 Series FDS Valves, Bulletin: P - 140
Diverter Valves
The D and S series diverting valves reduce the number of valves in a system, thereby saving cost and giving the user easier control by using a single valve in place of multiple valves. The diverter valve can be used with all the standard end connections and has various types of ball porting. Bulletin: P - 108
Instrumentation Valves
The L series valves for instrumentation applications are assembled with the Let-Lok compression fitting ends. The ends are one-piece casting, machined to fit Imperial or Metric tubing from 1/4 to 1 or 6 mm to 25 mm. Pressure rating up to 3000 psi (210 bar) and temperatures up to 250C (not combined). Bulletin: P - 116
Special Application
Valves for Oxygen, Chlorine or Ammonia service are specified Special Application Valves and each is manufactured under strict quality conditions. The O series valves for Oxygen service require very selective body and trim materials with special cleaning procedures. The K series valves for Dry Chlorine service are in accordance with the guidelines of the Chlorine Institute Pamphlet 6. Ammonia service valves have special stem assemblies defined A0866. All valves are assembled, tested and packaged in a cleanroom area. Oxygen Service: D - 503 Chlorine Service: D - 501
Page 8
Fugitive Emissions
In applications where it is essential to eliminate escape of volatile organic compounds (VOC) into the atmosphere, a Fugitive Emission kit can be mounted directly onto the top ISO platform of the valves. The kits are available for all sizes and can be operated manually or with an actuator. Each housing has two threaded ports for connecting tubing or instrumentation for registering potential leaks. 47P series ISO platform make the valves ideal for add-to such as extended handles, spring return handles and other attachments.
Locking Device
LLP (Locked in Last Position) The Habonim spring loaded locking device (LD) is ideal for applications where it is critical to keep the valve position without the risk of accidental operation. The locking device fits easily to the valve stem by simply removing the stem nut and threading the lock stem above the handle. The LD can lock the valve in closed or open position. The LD can be fitted to the valve in-line. Available in sizes 1 / 2 " to 2".
While lifting the lock housing above the stop pin (1) turn the wrench (2) to its new position. When the handle is in its new position release the housing to fit on the stop pin (3).
Diverter Valves
Habonims line of diverting valves are available in D47P, S47P or 61/62P series. The valves have ball types for any flow pattern. These flow combinations reduce the number of valves in a system, thereby saving costs and giving the user easier control by using a single valve in place of multiple valves. They have the advantage of incoporating the same body dimensions that will allow any standard end connection to be fitted to the valve. The valves incoporate all the additional options of the two way valves including cavity seats (in D47, S47 series only). Bulletin: P - 108 Bulletin: P - 120
D47P Diverter
61/62P Multi-Port
Page 9
47P
&46 Series
17
16 24 23 13 22 12 11
14
15
14
17
46 Series Handle
9 19 2
3 5 6 1 20 5
18
4 2
ITEM 1
DESCRIPTION
BODY
MATERIAL
STAINLESS ST. ASTM A351 CF8M CARBON ST. AI05, WCB HASTELOY-C, ALLOY-20, MONEL
QTY. 1
ITEM 10 11 12 13 14 15 16 17 18 19
DESCRIPTION
FOLLOWER DISC SPRING STEM NUT LOCKING CLIP HANDLE SERRATED WASHER HANDLE NUT SLEEVE BODY BOLT BODY NUT TAG (NOT SHOWN) LOCK HOUSING LOCK STEM LOCK SPRING LOCK CIRCLIP
MATERIAL
STAINLESS ST. AISI 316L STAINLESS ST. 17-7PH STAINLESS ST. AISI 316 STAINLESS ST. AISI 304 STAINLESS ST. AISI 430 CARBON ST. ZINC PLATED STAINLESS ST. AISI 410 STAINLESS ST. AISI 316 VINYL PLASTISOL STAINLESS ST. AISI 304 CARBON ST. ZINC PLATED STAINLESS ST. AISI 316 CARBON ST. ZINC PLATED STAINLESS ST. AISI 316 STAINLESS ST. AISI 304 STAINLESS ST. AISI 304 STAINLESS STEEL MUSIC WIRE SPRING STEEL
QTY. 1-2** 2 1 1 1 1 1 1 4 4 1 1 1 1 1
END CONNECTOR
STAINLESS ST. ASTM A351 CF3M CARBON ST. AI05, WCB HASTELOY-C, ALLOY-20, MONEL
BALL
STAINLESS ST. ASTM A351 CF8M STAINLESS ST. ASTM A276 316 HASTELOY-C, ALLOY-20, MONEL
STEM
STAINLESS ST. ASTM A276 316 STAINLESS ST 17-4PH HASTELOY-C, ALLOY-20, MONEL
*5 *6 *7 8 *9
SEAT BODY SEAL STEM THRUST SEAL STOP PIN STEM PACKING
PTFE, RPTFE, NRG, PEEK, TFM, UHMWPE, VESPEL PTFE, RPTFE, TFM, UHMWPE, GRAPHITE, METAL O-RING PTFE, RPTFE, PEEK, NYLATRON, UHMWPE, VESPEL STAINLESS ST. AISI 303 PTFE, RPTFE, TFM, UHMWPE, OR GRAPHITE
2 2 1 1 2-3 20 21 22 23 24
**
Page 10
47P
&46 Series
S
(47P SERIES)
B W A S
(46 SERIES)
1/2-
D
BALL BORE
H
(46)
CLOCKWISE TO CLOSE
B A
STEM DIMENSIONS
ACROSS FLATS Stem flats show valve ball position
CLOCKWISE TO CLOSE
N THREAD
CLOCKWISE TO CLOSE
1- 2 with nut
16
FB
1/4, 3/8 1/2 3/4
Unit
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
Bore
11.15 0.44 14.3 0.56 20.6 0.81 25.4 1.00 31.8 1.25 38.1 1.50 50.8 2.0
A
66.0 2.598 71.0 2.795 93.7 3.689 108.0 4.252 115.5 4.547 128.0 5.039 158.0 6.220
B
20.6 0.811 24.5 0.965 31.7 1.248 40.9 1.610 48.4 1.906 56.3 2.217 72.6 2.858
C
29.0 1.142 32.4 1.236 38.2 1.504 42.7 1.679 43.6 1.717 48.3 1.902 70.0 2.756
D
38.7 1.524 41.4 1.618 55.6 2.189 60.2 2.370 73.0 2.874 77.8 3.063 88.1 3.469
H(47P)
61.5 2.421 63.9 2.516 79.4 3.126 84.1 3.311 97.0 3.819 101.8 4.008 115.1 4.531
H(46)
44.5 1.752 46.7 1.838 60.0 2.362 64.8 2.551 76.5 3.011 81.2 3.197 112.1 4.413
S(47P) S (46)
150.0 5.906 150.0 5.906 187.0 7.362 187.0 7.362 237.0 9.331 237.0 9.331 237.0 9.331 114.0 4.49 114.0 4.49 146.0 5.75 146.0 5.75 178.0 7.00 178.0 7.00 287.0 11.3
W
47.0 1.850 53.7 2.114 63.7 2.507 71.7 2.822 86.7 3.413 96.9 3.815 108.0 4.252
M
5.5 0.217 5.5 0.217 7.54 0.297 7.54 0.297 8.71 0.343 8.71 0.343 8.71 0.343
N
3/8 UNF 3/8 UNF 7/16 UNF 7/16 UNF 9/16 UNF 9/16 UNF 9/16 UNF
P
0.283
7.2 M5X10 7.2 M5X10 0.283 7.2 M5X10 0.283 7.2 M5X10 0.283 8.0 M6X12 0.315 8.5 M6X12 0.334 13.5 M8X12 0.531
1 11/4 11/2 2
Page 11
47P
&46 Series
16 23 22 9 21 11 24 23 9 21 2 3 5 17 6 2 20
Stainless steel
15 14 13 19 12 11 10 8
tab washer
6 5 1
18
4
Carbon steel
18
ITEM 1
DESCRIPTION
BODY
MATERIAL
STAINLESS ST. ASTM A351 CF8M CARBON ST. WCB HASTELOY-C, ALLOY-20, MONEL
QTY. 1
ITEM 11 12 13 14 15 16 17
DESCRIPTION
FOLLOWER STOP PLATE STEM NUT (SLOTTED) WRENCH HANDLE WRENCH HEAD WRENCH BOLT SEAT RETAINING RING
MATERIAL
STAINLESS ST. AISI 316L STAINLESS ST. 430 CARBON ST. ZINC PLATED CARBON ST. ZINC PLATED CARBON ST. ZINC PLATED STAINLESS ST. AISI 304 MALEABLE IRON STAINLESS ST. AISI 304 STAINLESS ST. ASTM A351 CF8M CARBON ST. WCB HASTELOY-C, ALLOY-20, MONEL
QTY. 1 1 1 1 1 1 1
END CONNECTOR
STAINLESS ST. ASTM A351 CF3M CARBON ST. WCB HASTELOY-C, ALLOY-20, MONEL
3 4
BALL STEM
STAINLESS ST. ASTM A351 CF8M HASTELOY-C, ALLOY-20, MONEL STAINLESS ST. ASTM A276 316 STAINLESS ST 17-4PH HASTELOY-C, ALLOY-20, MONEL
1 1
*5 *6 *7 8 9 *10
SEAT BODY SEAL STEM THRUST SEAL STOP PIN STEM PACKING
PTFE, RPTFE, NRG, PEEK, TFM, UHMWPE, VESPEL PTFE, RPTFE, TFM, UHMWPE, GRAPHITE, METAL O-RING PTFE, RPTFE, PEEK, NYLATRON, UHMWPE, VESPEL STAINLESS ST. AISI 303 PTFE, RPTFE, TFM, UHMWPE, OR GRAPHITE
2 2 1 1 1 3 1
18 19 20 21 22 23
BODY BOLT (S/S) (C/S) BODY NUT (S/S) TAG DISC SPRING TAB WASHER STEM NUT, (NON-SLOTTED)
STAINLESS ST. AISI 304 CARBON ST. ZINC PLATED STAINLESS ST. AISI 304 STAINLESS ST. AISI 316 STAINLESS ST. 17-7PH STAINLESS ST. AISI 304 STAINLESS ST. AISI 316 CARBON ST. ZINC PLATED
8 16 8 1 2 1 1
Page 12
47P
&46 Series
Stainless Steel
TxL THREAD F PCD
C
BALL BORE
CLOCKWISE TO CLOSE
STEM HEIGHT
B A S
Carbon Steel
TxL THREAD F PCD
D C
BALL BORE
CLOCKWISE TO CLOSE
STEM HEIGHT
B A
STEM DIMENSIONS
P
M
Valve Dimensions 3- 4
RB 3 4 FB 21/2 3 4 Bore
63.5 2.50 82.6 3.25 100.0 3.94
A
R/B
A
F/B
B
83.3 3.280 108.8 4.283 123.0 4.843
C
98.3 3.870 114.1 4.492 124.0 4.882
D
144.9 5.705 160.7 6.327 170.5 6.713
H
185.0 7.287 200.0 7.894 211.0 8.299
S
400.0 15.75 600.0 23.62 600.0 23.62
W
140.0 5.500 177.0 6.969 200.0 7.874
M
18.9 0.744 18.9 0.744 18.9 0.744
N
1 UNS 1 UNS 1 UNS
P
16.5 0.649 16.5 0.649 16.5 0.649
TxL
M10x20 M10x20 M10x20
F (ISO)
F10 102.0 F10 102.0 F10 102.0
Weight
13.7 30.28 23.7 52.4 30.0 66.3 Kg lb Kg lb Kg lb
Page 13
Standards of Compliance
Design: Threaded End Connections: ANSI B16.34 BS 5351, BS 5159 NPT ANSI B1.20.1 BSPT ISO R/7, BS 21 BSPP ISO R/7, BS 2779 DIN 2999, DIN 3852 Socket Weld End Connections: Buttweld End Connections: (Schedules 5, 10, 40, 80) Pressure Testing: Fire Testing: NACE (must be specified) Certification: BS 1600. API 5L. ANSI B16.11, DIN 3239/Pt 2 API 5L. BS 1600 ANSI B16.25, DIN 3239/Pt 1 API 598. BS 6755 Pt. 1 ISO 5208 API 607 4th Edt. API 6F BS 6755 Pt. 2. MR-0175 ISO 9001-2000 PED 97/23/EC Module H ATEX Directive 94/9/EC
1 1 3 7
5 3
4 4 2 6 2
Cv Values
VALVE SIZE
RB
1/4 3/8 1/2 3/4 1" 11/4 11/2 2 21/2 3 1/2 3/4 1" 11/4 11/2 2 21/2 3 4
FLOW COEFFICIENTS
17- 4PH
Stem material
FB
Cv
3 5 8 12 32 57 80 104 240 320 580 2400
Kv
2.6 4.3 6.9 10.4 28.1 49.3 69.2 90 208 277 501 2070
Nm
13.2 13.2 13.2 13.2 24.4 24.4 48.6 48.6
in-lb
117 117 117 117 216 216 430 430
Nm
91 91 91 91 165 165 268 268 268 1920 1920 1920
in-lb
800 800 800 800 1,460 1,460 2,370 2,370 2,370 17,000 17,000 17,000
In-Line Maintenance
The 47P and 46 series 3-piece ball valves are in-line repairable, thus reducing on maintenance time and cost when servicing the valves. This also allows quick and easy replacement of the valve trim or upgrading for new applications without loss of downtime. Prior to servicing the valve, bring it to the open position making sure to release line pressure and drain all trapped media from the valve cavity. Keep the valve in the open position and remove all but one body bolt, so the valve body can swing away from its installed position and be brought out of the pipe line. In this position it is easy to replace all internal parts and then swing the body back to its original position. If it is required to completely remove the body, remove the last bolt and bring out the body center section.
NONE NONE
Cv- flow in US GPM, pressure in psi Kv- flow in m 3 /hr, pressure in bar Valve flow rates are determined in full open position with water temperature of 15 C (60 F)
Actuated Valves
Where automation is required, the 47P series ball valves are available with Habonims unique 4-Piston pneumatic Compact actuator. The Compact actuator is available in 8 sizes, spring return or double acting. All sizes except the H15, have NAMUR air connections for attaching solenoids. Limit switches and positioners can be mounted on the actuator top face according to NAMUR or ISO bolt pattern interface. Please refer to Bulletin B-310.
Page 14
1/2
- 2 46 SERIES
3- 4 47P SERIES
G B C A
L J K
G B
47P SERIES
VALVE SIZE ACTUATOR SIZE
46 SERIES
COMPACT ACTUATOR
A
29.0
B
48 48 48 48 48 48 48 48 60 60 48 48 60 60 60 60 60 60 60 60 60 60 60 60 60 60 80 80 80 120 120 80 80 120 120 80 80 120 120
C
77.0 77.0 77.0 80.4 80.4 80.4 86.2 86.2 98.2 98.2 90.7 90.7 102.7 102.7 103.6 103.6 103.6 103.6 108.3 108.3 108.3 108.3 130.0 130.0 130.0 130.0 178.3 178.3 178.3 218.3 218.3 194.1 194.1 234.1 234.1 204.0 204.0 244.0 244.0
E
137.0 143.6 161.4 140.4 147.0 164.8 146.2 152.8 182.6 194.2 150.7 157.3 187.1 198.7 170.2 188.0 199.6 225.7 174.9 192.7 204.3 230.4 214.4 226.0 252.1 274.8 274.3 300.4 323.1 413.8 461.3 316.2 338.9 429.6 477.1 326.1 348.8 439.5 487.0
G
144.8 154.7 173.3 148.2 158.1 176.7 154.0 163.9 194.5 204.4 158.5 168.4 199.0 208.9 181.3 199.9 209.8 238.6 186.0 204.6 214.5 243.3 226.3 236.2 265.0 287.4 284.5 313.3 335.7 425.7 480.8 329.1 351.5 441.5 496.6 339.0 361.4 451.4 506.5
J
44.0 52.0 49.3 43.0 51.8 50.5 59.0 59.0 69.8 69.8 60.8 60.8 71.8 71.8 68.3 73.8 73.8 71.9 68.5 73.8 73.8 71.5
A 58.6
K
59.9 67.9 65.2 62.1 70.9 69.6 81.2 81.2 92.0 92.0 86.2 86.2 97.2 97.2 96.9 102.4 102.4 100.5 101.8 107.1 107.1 104.8 118.6 118.6 118.6 118.6
M
119.9 134.5 149.6 122.1 137.5 154.0 141.2 147.8 176.4 188.0 146.2 152.8 181.6 193.2 163.5 186.8 198.4 222.6 168.4 191.5 203.1 226.9 203.0 214.6 240.7 263.4
L
127.7 145.6 161.5 129.9 148.6 165.9 149.0 158.9 188.3 198.2 154.0 163.9 193.5 203.4 174.6 198.7 208.6 235.5 179.5 203.4 213.3 239.8 214.9 224.8 253.6 276.0
D
60.0 66.6 84.4 60.0 66.6 84.4 60.0 66.6 84.4 96.0 60.0 66.6 84.4 96.0 66.6 84.4 96.0 122.1 66.6 84.4 96.0 122.1 84.4 96.0 122.1 144.8 96.0 122.1 144.8 195.5 243.0 122.1 144.8 195.5 243.0 122.1 144.8 195.5 243.0
DA
80.4 93.3 120.8 80.4 93.3 120.8 80.4 93.3 120.8 141.6 93.3 93.3 120.5 141.6 93.3 120.8 141.6 172.4 93.3 120.8 141.6 172.4 120.8 141.6 172.4 201.2 141.6 172.4 201.2 264.3 321.5 172.4 201.2 264.3 321.5 172.4 201.2 264.3 321.5
SR
105.7 121.5 153.8 105.7 121.5 153.8 105.7 121.5 153.8 175.8 121.5 121.5 153.8 175.8 121.5 153.8 175.8 214.8 121.5 153.8 175.8 214.8 153.8 175.8 214.8 261.7 175.8 214.8 261.7 343.5 422.0 214.8 261.7 343.5 422.0 214.8 261.7 343.5 422.0
1/2
3/4
11/4
11/2
21/2
4 FB
H15 H20 H25 H15 H20 H25 H15 H20 H25 H30 H15 H20 H25 H30 H20 H25 H30 H35 H20 H25 H30 H35 H25 H30 H35 H45 H30 H35 H45 H60 H75 H35 H45 H60 H75 H35 H45 H60 H75
32.4
38.2
42.6
43.6
48.3
70.0
98.3
114.1
124.0
All dimensions are for reduce bore valve sizes. For full bore valve size dimension, use a one size-up valve.
Page 15
Identification Code
30
SIZE
SERVICE
SERIES
46 47P
BODY END
BALL STEM
SEAT SEAL
/ /
END TYPE
SPECIAL APPLICATION
SIZE
Code Inch
1/ " 4 3/ " 8 1/ " 2 3/ " 4
SERVICE
mm
SEAT
SEAL
END CONNECTION
02 03 05 07 10 12 15 20 25 30 40 60 80
A B C D F H I K L N O Q R S V W X
Antistatic Full bore Cryogenic Diverter bottom entry Firesafe High pressure High purity Dry Chlorine Let Lok Control Oxygen Cavity filler Bottom tank Diverter side entry Vacuum Steam & Thermal Fluid Metal seat
1 4 5 6 7 8 9 A C D E F I L M S T W Z
Bronze Carbon Steel Brass S. St. 316 (L) Monel S. St. 304 C. Steel LCB Alloy-20 Hasteloy-C Duplex S. St. 317L C. Steel LF2 Inconel 625 AL6XN 17-4PH SMO254 Titanium Hasteloy-C22 Inconel 718
A C F H J K L M P R S T U Y
TFM PCTFE PFA VX1 25% Glass filled PTFE Carbon filled PEEK Virgin PEEK Metal NRG 15% Glass filled PTFE VESPEL PTFE UHMWPE Acetal Resin DELRIN
B Buna "N" Shore 90 E EPDM (EPR) G Expanded Graphite I Impregnated Graphite J 25% Glass filled PTFE K Kalrez M PTFE coated S. St O-Ring N Neoprene R 15% Glass filled PTFE T PTFE U UHMWPE V Viton
BSPT BS 21 DIN DIN 2999 (BSPP) DIN 3852 NPT B1.20.1 BW Buttweld Sch 5,10, 40, 80 XBW Extended Buttweld SW Socketweld XSW Extended Socket Weld BWO OD tube ETO Extended OD tube SWO Socketweld OD tube TC Tri-Clamp KLM Copper tube brazing ETB Extended Copper tube LL Let Lok (Inch) LM Let Lok (Metric) PN40 Flanged DIN PN40/F1
Special Application
T L X 90 T port ball (61P series) L port ball (61P series) X port ball (62P series) Diverter ball valve 90 turn 180 Diverter ball valve 180 turn A0866 Stem seal Ammonia service P043 Stem seal for vacuum and gas service F043 Stem seal Neoprene P250 Ball with Pressure relief hole J2N05 Jacketed valve, No. Outlets, Type, Size Fugitive Emission FE Control valve seat V60 VB30 Control V Ball Double Block & Bleed DBB NACE Nace service Swivel Locking device LD LLP Locking device K Electro Polish EP Grit 180 G18 Grit 240 G24 Grit 320 G32
How to order
When placing an order for HABONIM valves, please provide as many details possible on the application such as: Media, Temperature, Pressure, Pipe line size and type of connection. Example A: 10 AFB46 - 4466TG / BW Size 1" (10), Antistatic (A), Firesafe (F), Fullbore (B), 3-piece (46), C. St Body & Ends (4), S. St 316 Trim (6), PTFE Seats (T), Graphite Body Seals (G), Buttweld ends (BW) Example B: 20 R47P - 666MKV / PN40 Size 2" (20), Tank Bottom (R), 3-piece ISO (47P), S. St 316 Body, End & Ball (6), S.St. 17-4PH Stem (M), PEEK Seats (K), Viton Body Seals (V), DIN Flanged end (PN40)
In accordance with our policy to strive for continuous improvement of the product, we reserve the right to alter the dimensions, technical data and information included in this catalogue when required. DELRIN is a registered trademark of DuPont, VESPEL is a registered trademark of DuPont, KEL-F is a registered trademark of 3M Company NYLATRON is a registered trademark of Quadrant DSM Engineering Plastic Products, TFM is a trademark of Dyneon, PEEK is a trademark of VICTREX