Académique Documents
Professionnel Documents
Culture Documents
2009 Genetec Inc. All rights reserved. Genetec Inc. distributes this document with software that includes an enduser license agreement and is furnished under license and may be used only in accordance with the terms of the license agreement. The contents of this document are protected under copyright law. The contents of this guide are furnished for informational use only and are subject to change without notice. Genetec Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in the informational content contained in this guide. This publication may not be copied, modified, or reproduced in any form or for any purpose, nor can any derivative works be created therefrom without Genetec Inc.s prior written consent. Genetec Inc. reserves the right to revise and improve its products as it sees fit. This document describes the state of a product at the time of documents last revision, and may not reflect the product at all times in the future. In no event shall Genetec Inc. be liable to any person or entity with respect to any loss or damage that is incidental to or consequential upon the instructions found in this document or the computer software and hardware products described herein. The use of this document is subject to the disclaimer of liability found in the enduser license agreement. "Genetec", "Omnicast", "Synergis", "AutoVu", "Federation", the Genetec stylized "G" and the Omnicast, Synergis and AutoVu logos are trademarks of Genetec Inc., either registered or pending registration in several jurisdictions. "Security Center" and the Security Center logo are trademarks of Genetec Inc. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. All specifications are subject to change without notice. Document Title: Omnicast 4.5 SR1 Installation and Upgrade Guide Documentation Number: EN.100.002-V4.5.SR1 (1) Date: December 23, 2009
Table of Contents
General Information .................................................................................................................................. 5 Contacting Technical Support ................................................................................................................ 5 System Requirements ................................................................................................................................ 6 Omnicast Client Requirements .............................................................................................................. 6 Omnicast Server Requirements ............................................................................................................. 7 Omnicast Software Requirements ......................................................................................................... 8 VMware ..................................................................................................................................................... 9 Installing Omnicast 4.5 SR1 ...................................................................................................................... 10 Omnicast 4.5 SR1 Server Installation ................................................................................................... 10 Manually Add a User to Manage the SQL 2008 Database ............................................................ 16 Installing Microsoft .NET Framework 3.5 SP1 for Windows Server 2008 R2 ................................ 17 Activating Microsoft .NET Framework 3.5 SP1 for Windows 7..................................................... 17 Installing Omnicast Web Applications .......................................................................................... 17 Omnicast 4.5 SR1 Client Installation .................................................................................................... 18 International Language Support .......................................................................................................... 21 Changing the Software Language ................................................................................................. 21 Documentation Limitations .......................................................................................................... 21 Documentation Locations .................................................................................................................... 21 Upgrading from Previous Omnicast Versions ........................................................................................... 22 Supported Upgrade Paths .................................................................................................................... 22 Upgrading from Omnicast 4.x to 4.5 SR1 ............................................................................................. 23 Upgrading Server .......................................................................................................................... 23 Upgrading Plugins ......................................................................................................................... 23 Upgrading Client ........................................................................................................................... 24 Performing a Silent Install of Omnicast .................................................................................................... 25 Installing and Upgrading from Previous Software Versions ................................................................ 25 Silent Installation Mechanism.............................................................................................................. 26 Prerequisites ........................................................................................................................................ 26 Using the Command Line ..................................................................................................................... 27 Silent Installation Command Line Syntax ................................................................................................. 28 Basic Syntax ......................................................................................................................................... 28 Setup Arguments ................................................................................................................................. 28 Installer Arguments ............................................................................................................................. 29 Silent Install Properties ............................................................................................................................ 30 Silent Install Examples ............................................................................................................................. 37 Server Silent Install Examples .............................................................................................................. 37 Client Silent Install Examples ............................................................................................................... 38
General Information
This document explains how to install Omnicast software and how to upgrade the software from a previous version.
Fax: 1-514-332-1692 from Monday to Friday, 8:00 AM to 8:00 PM (Eastern time, GMT -5h) No matter how you contact us, its a good idea to have all relevant product information available, including System ID and product version information.
System Requirements
In order to determine which configuration is best suited for your application, please contact the Genetec Sales Engineering team at salesengineering@genetec.com.
Low
Medium
High 2
Intel Pentium D 2.8 GHz, 2 MB Cache, 800 MHz FSB 1 GB of RAM 80 GB of storage or more 128 MB PCI-Express video adapter with DirectX 9.0 support 1024 x 768 or higher screen resolution 10/100 Ethernet Network Interface Card 16x DVD+/-RW drive 1 Sound card Intel Core2 Duo 2.93 GHz or higher, 4 MB Cache, 1066 MHz FSB 2.0 GB of RAM 250 GB of storage or more 256 MB PCI-Express x16 dual-head video adapter with DirectX 9.0 support 1280 x 1024 or higher screen resolution 10/100/1000 Ethernet Network Interface Card 16x DVD+/-RW drive1 Sound card Intel Core2 Quad 2.40 GHz or higher, 4 MB Cache, 1066 MHz FSB 4 GB of RAM 250 GB of storage or more 256 MB PCI-Express x16 dual-head video adapter with DirectX 9.0 support 1600 x 1200 or higher screen resolution 10/100/1000 Ethernet Network Interface Card 16x DVD+/-RW drive1 Sound card
1 2
A DVD-/+RW drive is recommended in order to export archived video sequences. This high-end configuration will allow users to view up to 32 Bosch or Verint MPEG-4 cameras at 4CIF/30fps at 2 Mbps.
Low
Medium
High
Intel Xeon 3.0 GHz, 2 MB Cache, 800 MHz FSB 2 GB of RAM 80 GB of storage or more Additional hard drive(s) for video storage Standard SVGA video card 800 x 600 or higher screen resolution 10/100 Ethernet Network Interface Card DVD ROM drive Dual Core Intel Xeon 5150, 2.66 GHz, 4 MB Cache, 1333 MHz FSB 2 GB of RAM 80 GB of storage or more Additional hard drive(s) for video storage Standard SVGA video card 800 x 600 or higher screen resolution 10/100/1000 Ethernet Network Interface Card DVD ROM drive 2x Dual Core Intel Xeon 5160, 3.00 GHz, 4 MB Cache, 1333 MHz FSB 4 GB of RAM 80 GB of storage or more Additional hard drive(s) for video storage Standard SVGA video card 800 x 600 or higher screen resolution 10/100/1000 Ethernet Network Interface Card DVD ROM drive
Archivers may record up to 300 cameras depending on the server's specifications and the recording quality settings. To determine which configuration is best suited for you, contact Sales Engineering at salesengineering@genetec.com.
OS 4
Microsoft Windows XP Pro SP2/SP3 32-bit/64-bit Microsoft Windows Vista SP1 Business or Ultimate 32-bit/64-bit Microsoft Windows 7 Professional or Ultimate 32-bit/64-bit Microsoft Windows Server 2003 Standard Edition SP1/SP2/R2 32-bit/64-bit 5 Microsoft Windows Server 2003 Enterprise Edition SP1/SP2/R2 32-bit/64bit5 Microsoft Windows Server 2008 Standard Edition SP2/R2 32-bit/64-bit5 Microsoft Windows Server 2008 Enterprise Edition SP2/R2 32-bit/64-bit5 SQL Server 2000 Enterprise SP4 SQL Server 2005 Express/Standard/Enterprise SP2/SP3 SQL Server 2008 Express/Standard/Enterprise Internet Explorer 6 or 7 (for Web Clients) VMware ESXi/ESX 3.5 update 3 and 4.0
Clustering is supported on server versions of Microsoft Windows. For installation information, see the Omnicast 4.1 Cluster Installation Guide available from the Documents section of Genetecs technical support website. This document was updated for version 4.1, and is still correct in most cases. However, there may be some discrepancies when installing an Omnicast 4.4 cluster. Contact Genetec Technical Support for help if necessary. 5 Omnicast is not supported on a Windows 2003/2008 Server running a Domain Controller. 6 For maximum performance, do not run Omnicast within a virtualized environment.
VMware
You can install Omnicast in a VMware environment following the same procedures performed during a regular installation: For a Server installation, see Omnicast 4.5 SR1 Server Installation on page 10. Note that all Omnicast services can be installed in the virtual environment.
For a Client installation, see Omnicast 4.5 SR1 Client Installation on page 18.
Note Performance is affected when running Omnicast in the virtual environment. For more information, contact Genetecs Sales Engineering team at salesengineering@genetec.com.
before or after the Omnicast Server installation, see Manually Add a User to Manage the SQL 2008 Database on page 16. If you are using Windows Server 2008 R2, Microsoft .NET Framework 3.5 SP1 needs to be installed before the Omnicast Server installation. For more information, see Installing Microsoft .NET Framework 3.5 SP1 for Windows Server 2008 R2 on page 17. If you are using Windows 7, Microsoft .NET Framework 3.5 SP1 needs to be activated (turned on) before the Omnicast Server installation. For more information, see Activating Microsoft .NET Framework 3.5 SP1 for Windows 7 on page 17. To install Omnicast Server: 1 Insert the Omnicast installation DVD in your computers DVD drive. If the InstallShield Wizard does not appear, double-click Setup.hta in the Omnicast root directory. Click Server installation. 2 If necessary, follow on-screen instruction to install any missing prerequisite software, click Install. Once the prerequisite software is installed, click Next.
Depending on what is installed, you may be prompted to reboot during the course of the installation of the prerequisites. If a reboot is requested, you must do so to complete the installation. After the system reboots, any remaining prerequisites are installed. Note Depending on the sequence of prerequisites to install, you may have to restart the installation. Read and accept the License Agreement, and click Next.
Select the default installation folder, and click Next. To choose a different installation folder, click Change. 5 Select the language the Omnicast Server will use, and click Next. To change to another language later, use the Language Tool. Your Omnicast license must allow you to use the selected language. The availability of a language in the drop-down list does not necessarily mean you have the license to use it. For information about languages supported in Omnicast, see International Language Support on page 21. 6 Select the default installation folder, and click Next. To choose a different installation folder, click Change. Note Regardless of where you choose to install your software, you need to have at least 300 MB of free space on your C: drive (or wherever \Windows is installed). Otherwise, the InstallShield will pop a message that says you do not have enough free space. 7 In the Select Type window, select Typical or Custom installation. Typical. Installs the most frequently used server components (Directory, Gateway, Archiver, Virtual Matrix and WatchDog). Archiver. Installs all necessary components for a server operating only as an Archiver. Custom. Allows you to choose which program features you want installed. This option is recommended for advanced users. If customizing the installation, in the Custom Setup window, click the icon the left of the feature to display a list of installation choices, and choose an installation option. 8 To display the available space on the disk volumes of your machine, click on the Space. In the Disk Space Requirements window, the volumes that do not meet the system requirements are highlighted. 9 Specify the username and password that will be used by the Omnicast services to logon to Windows. You have the choice to use the default username and password (OmnicastSvcUsr) or to specify your own. The selected user must be a member of the Administrators group and have the Log on as a service user right. 10 If you selected to install the Directory Failover Coordinator in the previous step, you will have to specify whether this computer is to be used as a Primary Directory server or a Backup Directory server, and click Next. If you select Backup Directory server, you will need to indicate the name of machine that the local Gateway should connect to, and whether it should connect to a Directory or another Gateway. The Gateway is the service that provides seamless connections between all Omnicast applications in a given system, regardless of whether they are located on the same LAN or not. The Gateway acts as a doorway to the Directory for all Omnicast applications.
11 In the Database Server Selection window, do one of the following: If SQL database server is not installed on the computer, select Install a new database server. This option will install Microsoft SQL Server 2005 Express Edition on the computer and create a database instance called Omnicast. If SQL database server is installed on the computer, and you would like to use this database, select Use an existing SQL database server. In the Database Server list, select the existing SQL Server name. For example, you can type: \\PCNAME\SQLEXPRESS. Where PCNAME is the name of the server computer where the Gateway will reside and SQLEXPRESS is the name of the database server instance. SQLEXPRESS is the default database name. 12 Click Next > Install. If you are installing on Windows Vista, you may get the following message:
This message is only a reminder. Click OK to continue with the installation, but make sure you enable Telnet Client after the installation is complete. The Server Administrator will open just before installation completes, so you can activate your Omnicast license.
13 In the Genetec Omnicast Server Admin dialog box. Do one of the following to activate your Omnicast license.
If you have Internet access, click on the
button to Import the license key from a file. In Select your license file, select the extension .lic and click on Open. Go to step 16. License keys for purchased Omnicast licenses can be obtained from http://www.genetec.com/english/customercare/support/license.aspx If you have already copied the license key to the clipboard, you may apply it by clicking on the button . Note If you do not activate your license you will not be able to activate your system. However, you can complete the installation and activate your license at a later time. 14 In the Web activation logon dialog box, enter the 18 digit Omnicast System ID and activation password. These are provided by the Genetec Sales department at the time of your software purchase.
15 If your system includes multiple servers, select the server you want to apply the license to.
16 Click OK. A confirmation message appears, click OK. Your license information appears. All the services installed on this computer should appear under System in the resource tree shown in the left pane.
17 If the Archiver service was installed, you have to create at least one Archiver extension to enable the Archiver to discover video units. Only units corresponding to the extension types you add can be discovered. You can only add extensions which you have a license for. Extensions can also be added at a later time. To learn how to create and configure Archiver extensions, see Creating an Archiver extension in the Omnicast 4.5 Administrator Guide. Note Starting from 4.2, Archiver extensions are no longer created automatically according to the Archiver options granted by your license. 18 Close the Server Admin, and click Finish to complete the installation. IMPORTANT After you have configured all the entities in your system (users, cameras, sites, alarms, etc.), you should backup your system configuration database (DirectorySQL
Installing Microsoft .NET Framework 3.5 SP1 for Windows Server 2008 R2
When installing Omnicast Server for use with Windows Server 2008 R2, you must manually install Microsoft .NET Framework 3.5 SP1. To manually install Microsoft .NET Framework for Windows Server 2008 R2: 1 Choose Start > Control Panel > Administrative Tools > Server Manager. 2 Select Features > Add Features. 3 In the Select Features dialog box, choose .NET Framework 3.5.1 Features. 4 In the Add Features Wizard dialog box, click the Add Required Role Services button then click Next > Next. 5 From the Role Services list, make sure that .NET Extensibility is selected then click Next > Install. 6 When the installation is complete, click Close.
Follow steps eight to eighteen of the Omnicast server installation, see Omnicast 4.5 SR1 Server Installation on page 10. Important The following prerequisites need to be installed on the system running the Web Application in order for it to run correctly: Microsoft .NET Framework 3.0 Microsoft .NET Framework 3.5 SP1 Microsoft Data Access Components (MDAC) 2.8 Visual C++ 2005 Redistributable Visual C++ 2008 Redistributable Windows Installer 3.1 If you are connected to the internet, the installer will automatically download the prerequisites for you. If there is no internet connection available, any prerequisites you are missing can be found on your Omnicast DVD in the following folder: \Server\ISSetupPrerequisites.
4 5
Depending on what is installed, you may be prompted to reboot your system during the course of the installation. If a reboot is requested, you must do so to complete the installation. Read and accept the License Agreement, and click Next. Select the language Omnicast Client will use, and click Next. This does not affect the language of the InstallShield Wizard. To change to another language at a later time, use the Language Tool. Your Omnicast license must allow you to use the selected language. The availability of a language in the drop-down list does not necessarily mean you have the license to use it. See International Language Support for information regarding the use of other languages. Select the default installation folder, and click Next. To choose a different installation folder, click Change. Note Regardless of where you choose to install your software, you need to have at least 300 MB of free space on your C: drive (or wherever \Windows is installed), otherwise the InstallShield will say that you do not have enough space.
In the Select Type window, select Typical or Custom installation, and click Next. Typical. Installs all client applications (Live Viewer, Archive Player, Config Tool and all plugins). This option requires the most disk space. Custom. Allows you to choose which program features you want installed. This option is recommended for advanced users. Select a program feature to see a brief description displayed on the right. The space required for the installation of each feature is also indicated.
Note To install the Report Viewer, a running SQL instance must be accessible from the workstation. If you chose to install the Report Viewer, you will be prompted to select a database server.
Click Install. A progress bar displays the indicating the installation status. Click Finish.
Documentation Limitations
The documentation for Omnicast 4.5 SR1 is not available for all supported languages. The limitations are as follows:
Czech, Dutch, German, Italian, Spanish, Portuguese, and Slovak: All user guides are in English. French: Only the Live Viewer and the Archive Player user guides are in French. Japanese: The user guide is installed in Japanese, but corresponds to version 4.0 GA. The 4.5 GA user guides are only available in English.
Documentation Locations
You may find the CHM version of all available user guides in C:\Program Files\Common Files\DVR Software 4.5\Documentation. The PDF version of the user guides are found on the installation CD.
4.5 GA to 4.5 SR1 To upgrade from older versions of Omnicast (3.5 or 4.0) you need to perform two sets of procedures, as well as upgrade your database if you are using MSDE, please contact Genetec Technical Support for assistance. The Omnicast InstallShield detects older versions of the software installed on your computer and instructs you on how upgrade depending on the version installed.
4.1 SR3 to 4.5 SR1 4.2 GA to 4.5 SR1 4.3 GA to 4.5 SR1 4.4 SR1 to 4.5 SR1
If you are not using the default local system user OmnicastSvcUsr to run your services, please have the logon information ready.
Upgrading Server
You cannot have two versions of Omnicast running on the same computer. 1 If you install Omnicast 4.5 SR1 Server on a computer where an older version exists, a message appears asking you if you want to install the latest version. Click OK. 2 In the Server Installation Welcome window, click Next to remove the old version and continue with the upgrade process, or click Cancel to stop the installation. 3 Follow the Omnicast 4.5 SR1 Server Installation procedure on page 10.
Upgrading Plugins
Starting with Omnicast 4.4 there are two types of plugins, version dependent plugins and version independent plugins. Versions dependent plugins must be upgraded to plugin version 4.5. Version independent plugins. You do not have to update the version independent plugins. Version independent plugins start at version 2.0. For example, if you are upgrading from Omnicast 4.3 GA, the Barco Hydra plugins have to be upgraded to at least version 2.0. Version independent plugins could be upgraded during the Omnicast 4.5 release cycle, for example to version 2.1 or 2.2, and these updated plugins would also be compatible with Omnicast 4.5. For more on version independence and upgrade steps for individual plugins, see the Plugin Manual section in any Omnicast 4.5 user guide. The Plugin Manual section lists all plugins available for this release and their corresponding user guide where more information can be found.
The following are some common upgrade steps for all plugins. Refer to the plugins own user guide for more information, or contact Genetec Technical Support if you have questions.
Version dependent plugins. Version dependent plugins have to be upgraded to version 4.5.
To upgrade an Omnicast plugin: 1 If your plugin uses a custom XML configuration file (called the Event mapping file), make a copy of the file and keep it in a safe place. 2 If you are installing a LV plugin, close the Live Viewer on the local computer. 3 Uninstall the older version of the plugin and delete its instances in the Config Tool. 4 Install the new plugin. 5 Overwrite the newly installed XML file with the one you saved elsewhere. Typically, this XML file is located by default at C:\Program Files\Omnicast Plugins 4.5 (for version dependent plugins). C:\Program Files\Omnicast Plugins\<plugin name>. (for version independent plugins). 6 Do one of the following: If you installed an ME plugin, reboot the Metadata Engine.
Open the Config Tool, select the instance of the plugin you just upgraded, and change the path of the event mapping file so it points to the installation folder of the new plugin. Note This step is not necessary when upgrading from one version independent plugin to another since the installer places them in the same folder.
Upgrading Client
Omnicast 4.5 SR1 can be installed on the same machine as earlier versions of Omnicast clients. To upgrade the Omnicast client: 1 If installing Omnicast client on a computer where an earlier Omnicast client the following message appears, click OK. To remove the older Client(s), use Add/Remove Programs.
2 3
In the Client Installation Welcome window, click Next to install the current client version in parallel with the earlier version. Or, click Cancel to stop the installation. Follow the Omnicast 4.5 SR1 Client Installation procedure on page 18.
Installation language Application language Client or Server installation path Client or Server features to install Username and password for running the services Database server names
Prerequisites
The Omnicast prerequisites will be automatically installed if not present on the computer. If .NET is installed as part of the prerequisites, the silent installation will be interrupted. You will have to restart the silent installation process right after .NET has been installed, by invoking the same command line you originally typed-in to launch the silent installation. Note that depending on your option choices in the command line, the computer may reboot before you need to invoke the command for the second time. At that point, the rest of the prerequisites will be installed, along with the Omnicast Client or Server. The Genetec Omnicast 4.x version dependent SDK (\OMNICAST 4.X VD SDK\VDSDK.EXE) must be manually installed if necessary. If you are installing the Omnicast Server, you must make sure that a database server is available for Omnicast to connect to. If there is none, you can install Microsoft SQL Server 2005 Express Edition on your server PC before performing the silent installation on any PCs on your system. The Microsoft SQL Server 2005 Express Edition InstallShield is found in the folder \SERVER\SQLEXPRESS of the Omnicast distribution DVD. The following are also required for particular installation scenarios:
When performing a full installation using ADDLOCAL=ALL, Internet Information Services (IIS) must be installed. You can select an existing Windows user account for Omnicast's services to run under instead of a default user account which Omnicast will add. In this case, you must enter the username and password of a Windows user account that has the "log on as service" user right and that is part of the Administrators group. If the Windows account you are using does not have Administrator privileges, the installation will fail.
If the Windows account has Administrator privileges, but does not have the "log on as service" user right, the silent installation will complete but Omnicast will not work properly. When you do not enter these values explicitly, defaults are used which are automatically given the correct user rights and privileges. Refer to SERVICEUSERNAME and SERVICEPASSWORD on page 34. If you are using SQL 2008, you also must manually add a user to manage the database, see Manually Add a User to Manage the SQL 2008 Database on page 16.
Typically, you point the command line to the folder where the setup.exe and .msi files for the application you want to silently install are located. For more information, see Silent Installation Mechanism on page 26. For example, if you placed the folder Client (containing all Omnicast Client files) in the root of the C:\ drive, and you want to perform a silent installation of the Omnicast Client, enter the following at the command prompt: type: c: to switch to the root of the C drive, then type cd Client. The command prompt should now be pointing to the directory containing the setup.exe file of the Client: C:\Client>. Note A command line is limited to a maximum of 850 characters. For more information, see 850Character Limit on page 39. Using advanced installation methods, you can reference the full path of the setup.exe from the command line in quotes, for example "C:\Omnicast\Genetec\Client\setup.exe"(do not include any spaces in the path). As well as running the silent installation commands from a batch file.
Where [Installation Language] is the language the installer uses, and [InstallationPath] is the path where the software should be installed.
Setup Arguments
The setup arguments determine the behaviour of setup.exe. The following arguments are mandatory. Optional installation properties for the /v argument in italics above are covered later in the document.
Argument Function
/L
Sets the language of the installer. Note: While a silent installation that properly completes will provide no visual feedback, if the silent installation cannot complete there may be some visual feedback. In this case, the language set by the /L argument is used. This argument is not meant to set the language the application uses once it is installed; refer to LANGID on page 35 for how to do this. However, if no value for LANGID is given, then the language of the installation using the value for /L does determine the operating language of the application.
The two following installation languages are available: Language name Corresponding ID English 1033 French (Canada) 3084
Warning: Do not put any spaces between /L and the language code. /s /v"<properties>"
Example: /L1033 Sets the setup.exe to run silently so no questions or prompts are displayed.
Passes any properties between the quotes directly to the msiexec.exe executable. Warning: Do not put any spaces between /v and the properties in quotes.
Installer Arguments
Installer arguments are entered in double-quotes immediately following the setup argument /v. They tell the installer (msiexec.exe) how to behave and what to install.
Argument Function
Sets the InstallShield to run silently so no questions or prompts are displayed. Produces a log file containing all information in verbose format. Enter a path, and the name you want to give to the log file, following the argument. Note: /l*v is an argument which appears within the double-quotes of the /v argument, along with the optional installation properties described below.
Example: /l*v c:\install.log
If there is a space in the path, it should be wrapped in quotes. Each of the quotes must be preceded by a backslash (\) .
Example: INSTALLDIR=\"C:\Program Files\Genetec Omnicast Server 4.5\"
ADDLOCAL
Specifies which Server and Client features to install. Note the following:
If you want to select specific features to install, first enter Resources. For example, when installing Help, LiveViewer, and ArchivePlayer, you would first enter Resources.
The tables below are used if you want to select specific features to install. Each feature is followed by the possible values you can enter for it, whether or not a value for the feature must be entered, and whether you can only enter one value for the feature, or can enter several. When entering multiple values separate them with commas. Omnicast Server features:
Feature Possible values Resources Note: Resources enables the localization functionality in the installed software. Web Tools Help Directory Archiver FOS RestoreArchiver Gateway MetadataEngine Federation VirtualMatrix AuxiliaryArchiver Watchdog Note: The FOS value installs the Directory Failover Coordinator (DFC).
One or more values
Details
Mandatory, except when entering:
Resources
ADDLOCAL=ALL
Optional One value Optional One value Optional One value Optional
Federation versions
Fed35 Fed40SRx Fed41 Fed42 Fed43 Fed44 Fed45 Entering Federation listed in Services above installs the Omnicast Federation Server. Then you must indicate the Omnicast versions that can be federated by entering one or more of the properties listed. Example: Enter Fed41 to be able to federate Omnicast 4.1 systems. Note: If you enter a federation version without entering the Federation property, the Federation Server is installed anyhow.
EXAMPLE: ADDLOCAL=Resources,Help,Directory,Gateway,Federation,Fed41,Fed42,Fed43,Fed44
Resources
ADDLOCAL=ALL
installed software.
Applications
LiveViewer ArchivePlayer Genetec_ArchiveWeb ConfigTool Note: Genetec_ArchiveWeb allows you to create a copy of the webenabled standalone Archive Player to use alongside video exported from the Archive Player. When you specify the Genetec_ArchiveWeb feature, the Archive Player is also installed whether or not ArchivePlayer is indicated on the command line. However, Genetec_ArchiveWeb must be indicated explicitly for this feature to be installed even when ArchivePlayer is indicated. See Example 3: on 38.
Plugins Tools
Help
Help
One value
Example: ADDLOCAL=Resources,LiveViewer,ArchivePlayer,MacroEditor,ReportViewer,Help
Description Indicates if the Directory is primary or secondary in a DFC setup. The property can be
set to 1 to configure the Directory as the primary Directory or 0 to set it as a secondary Directory. When set to 0, the Directory service will be set to manual and will not be started at the end of the installation. The default value is 1. Example: ISPRIMARYFOS=0 PRIMARYSYSTEM
Specifies the primary Directory name and port (to be used with ISPRIMARYFOS) to which the Gateway will try to connect to. Only relevant if ISPRIMARYFOS=0.
The default port is 7998. Example: PRIMARYSYSTEM = PrimarySystemName:Port
GTWCONNECTEDTO
Specifies whether the Gateway will connect to a Directory or another Gateway. You connect a Gateway to another Gateway residing on a different network when you want to receive multicast streams from the remote network. Only relevant if ISPRIMARYFOS=0. It can be set to one of two values: DIRECTORY or GATEWAY. The default value is DIRECTORY.
Example: GTWCONNECTEDTO=GATEWAY
IS_SQLSERVER_SERVER
Specifies the database server name for all services. Note Use this property to set all servers to a specific server name. If you specify database server names for individual services, these supercede the value of this property see below.
Example: IS_SQLSERVER_SERVER=(local)\OMNICAST
SERVICEUSERNAME
Specifies the username that services will use. Note Usernames and corresponding passwords must first be created with the right credentials prior to using these properties. They should be administrators and have the "log on as a service" user right.
Example: SERVICEUSERNAME=.\Genetec
SERVICEPASSWORD
Specifies the password that services will use. Note Usernames and corresponding passwords must first be created with the right credentials prior to using these properties. They should be administrators and have the "log on as a service" user right.
Example: SERVICEPASSWORD=anypassword
ENTITY_SERVER ENTITY_DATABASE
ALARM_SERVER ALARM_DATABASE REPORTING_SERVER REPORTING_DATABASE ARCHIVING_SERVER ARCHIVING_DATABASE AUXILIARY_SERVER AUXILIARY_DATABASE RESTORE_SERVER OBJECT_SERVER OBJECT_DATABASE LANGID
Directory alarm database server (supersedes IS_SQLSERVER_SERVER) Directory alarm database Directory reporting database server (supersedes IS_SQLSERVER_SERVER) Directory reporting database Archiver database server (supersedes IS_SQLSERVER_SERVER) Archiver database Auxiliary Archiver database server (supersedes IS_SQLSERVER_SERVER) Auxiliary Archiver database Restore Archiver database server (supersedes IS_SQLSERVER_SERVER) Metadata database server (supersedes IS_SQLSERVER_SERVER) Metadata database Language to be used by Omnicast Server and Client applications and set in MachineSettings.xml. The LANGID property is different than the /L argument. LANGID determines what language is used for all text used throughout the Omnicast application, and is equivalent to setting the application language using the Language Tool, available from the Windows Start menu, at Genetec Omnicast 4.5 > Tools > Language Tool. The /L argument is only used to determine the language of the InstallShield, and has no affect on the operating language of the application when LANGID is used. See Basic Syntax on page 28 for more on the /L argument. The LANGID property can either be set with a number corresponding to the language ID, or the language name as indicated in the name of the DLL file. If the language entered cannot be found then English is used. If no language is specified, Omnicast uses the same language as the installation (as set by the /L argument). You can use the following language names or their corresponding language ID (LANGID).
Language name Corresponding ID
Czech 1029 Dutch 1043 English 1033 French 3084 German 1031 Italian 1040 Japanese 1041 Portuguese 2070 Slovak 1051 Spanish 1034 Example: For Italian you could use either value below. LANGID=1040 LANGID=Italian REBOOT
Used to force or suppress a reboot after the Server installation completes. In general, rebooting the system after installation is not necessary. However, rebooting may be required in some circumstances. For example, when installing on a clean machine some dependencies may be installed which require a reboot.
Possible values F S Result Forces a reboot when your installation is complete. Suppresses any reboot except one caused by a ForceReboot action see above. Suppresses any reboot caused by Windows Installer actions.
R Example: REBOOT= S
Note You can copy and paste these examples into the command line to serve as a basis for your installations.
The Archiver will be installed with a specific username and password for the service to run under. Files are installed to a new folder whose path is C:\NewServer; a directory server and database names are specified and no reboot will occur. The installation will be performed silently; the language the installer uses will be English. Example 2: Setup.exe /L1033 /s /v"/qn INSTALLDIR=\"C:\Program Files\Genetec Omnicast Server 4.5\"
ADDLOCAL=Resources,Directory,Archiver,Gateway,VirtualMatrix,Help,Federation,Fed41,Fed42,Fed43"
The Directory, Archiver, Gateway, Virtual Matrix and help files are installed silently. As well, the Federation Server is installed, and Omnicast systems that are version 4.1, 4.2, 4.3, or 4.4 can be federated. The language the installer uses will be English. Example 3: Setup.exe /L3084 /s /v"/qn" A Typical installation will be performed silently. The language the installer uses will be French. Example 4: Setup.exe /L1033 /s /v"/qn ADDLOCAL=ALL" A Complete installation will be performed silently. The language the installer uses will be English. Example 5: Setup.exe /L1033 /s /v"/qn ADDLOCAL=ALL IS_SQLSERVER_SERVER=(local)\SQL2005 /l*v C:\Serverlog.log" A Complete Installation will be performed silently. The database server name used by all services will be set using the IS_SQLSERVER_SERVER value. A log file is created, and placed in the root of the C: drive. The language the installer uses will be English. Example 6: Setup.exe /L1033 /s /v"/qn ADDLOCAL=ALL LANGID=1041"
A Complete Installation will be performed silently. Omnicast will use language 1041 (Japanese). The language the installer uses will be English.
Example 1: Setup.exe /L1033 /s /v"/qn INSTALLDIR=C:\GENETEC_PATH ADDLOCAL=Resources,Help,LiveViewer,ArchivePlayer" The Live Viewer, Archive Player and the help files will be installed silently; the language the installer uses will be English. Example 2: Setup.exe /L3084 /s /v"/qn INSTALLDIR=\"C:\Program Files\Genetec Omnicast Client 4.5\" ADDLOCAL=Resources, Help,LiveViewer,ArchiverPlayer,ConfigTool" The Live Viewer, the Config Tool, the Archive Player, and the help files will be installed silently; the language the installer uses will be French. Example 3: Setup.exe /L3084 /s /v"/qn ADDLOCAL=Resources,Help,LiveViewer,Genetec_ArchiveWeb" The Live Viewer, the Archive Player with the ability to create a copy of the web-enabled standalone Archive Player to use alongside exported video and the help files will be installed silently. It is not necessary to use the ArchiverPlayer value since Genetec_ArchiveWeb itself automatically invokes the installation of the Archive Player. The language the installer uses will be French. Example 4: Setup.exe /L3084 /s /v"/qn" This is equivalent to a Typical installation performed silently; the language the installer uses will be French. Example 5: Setup.exe /L1033 /s /v"/qn ADDLOCAL=ALL" This is equivalent to a Complete installation performed silently; the language the installer uses will be English.
Example 6: Setup.exe /L1033 /s /v"/qn ADDLOCAL=ALL LANGID=1029" This is equivalent to a Complete installation performed silently; the language the installer uses will be English. Omnicast (client applications) will use language 1029 (Czech).