Académique Documents
Professionnel Documents
Culture Documents
B29 6165
STN PAINTED BODY EQUIPPED SIDE FACE - DOOR MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE
Page 1/19
No use restriction
This is a translation, the French original shall be used in all cases of litigation Date of draft translation: 15/06/2010
WARNING This PSA norm has been translated by RHN / NCF into English using the automatic translation software Systran (approved by PSA). The quality of this translation has not been technically validated by the PSA Technical Discipline proprietor of this norm. This document is available on-line in "Normes" Intranet (normes.inetpsa.com) as well as on the B2B portal (suppliers and industrial partners). If a technical validation of this translation is required, PLEASE request it from RHN / NCF at the address below: normespsa@mpsa.com
FOREWORD This document, as an experimental standard, is applicable and submitted for observations for a duration of 4 months. If no comments are received by 15/10/2010 at the address: normespsa@mpsa.com the content of this document shall be confirmed.
This " Spcification Technique Normative (STN)" [Standard Technical Specification] is a document compiled according to the principles of "Ingnierie des Systmes Automobiles" (ISA)" [Automotive Engineering Systems], which computes, for the system used for the product development tree structure, all the generic requirements, to obtain consistency between all interested parties. The STN enables the Project team to compile the corresponding Technical Specification (ST) by adapting the contents of the STN to the perimeter of the project. Feedback from projects together with innovations and external requirements are elements which are used to develop the STN. Drafted by Gilles CHAGOT DTI/DITV/PMXP/ECH/PECV Checked by Approved by Maurice CARFANTAN DTI/DITV/PMXP/ECH/PECV
Date 15/06/2010
Signature -
Date 15/06/2010
Signature -
Date 15/06/2010
Signature -
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 2/19
RECORDS
Index OR Date 06/04/2010 Nature of modifications CREATION OF THE NORM ADDITION OF SPECIFICATION FOR GREEN MATERIALS. SUPPRESSION OF THE USE OF THE STANDARD D25 1298. ADDITION OF THE USE OF THE STANDARD D47 1217. ADDITION OF THE DEFINITION OF AREA OF ASPECT (4.1.). RECASTING OF REQUIREMENT 2 (5.4.5.1.) CREATION OF A NEW REQUIREMENT ABOUT BEHAVIOUR TO MICRO-ORGANISMS (REQUIREMENT 13 - 5.5.3.2.2.).
15/06/2010
PARTICIPANTS
The following persons took part in the drafting and/or checking of this norm: DTI/DITV/ICPE/ICOE/LVEV/UETE DTI/DITV/PMXP/ECH/GHDD DTI/DITV/PMXP/ECH/PECV DTI/DITV/PMXP/PEI/ACF DTI/DITV/RHN/NCF Virginie LEPRINCE-MAZURIER Agns MASSEY Sylvie CAFFIER, Delphine ASSELIN Claire CZECHOWSKY Guy DHENIN
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 3/19
CONTENTS
1. OBJECT 2. FIELD OF APPLICATION 2.1. DEVELOPMENT CONTEXT OF THE SYSTEM 2.2. GENERALDESCRIPTION OF THE SYSTEM 3. DOCUMENTARY REFERENTIAL 3.1. REFERENCE DOCUMENTS 3.1.1. Norms 3.1.2. Regulations 3.1.3. Other documents 3.2. APPLICABLES DOCUMENTS 3.2.1. Norms 3.2.2. Regulations 3.2.3. Other documents 4. TERMINOLOGY 4.1. GLOSSARY 4.2. ACRONYMS 5. REQUIREMENTS 5.1. FUNCTIONAL REQUIREMENTS 5.2. PERFORMANCE REQUIREMENTS 5.3. EXTERNAL INTERFACE REQUIREMENTS 5.4. OPERATIONAL REQUIREMENTS 5.4.1. Mission profile 5.4.2. Lifespan 5.4.3. Ergonomy and human factors 5.4.4. Dependability 5.4.4.1. Reliability 5.4.4.2. Maintainability 5.4.4.3. Availability 5.4.4.4. Safety 5.4.5. Product quality The material must forward a satisfactory aspect to nine 5.4.6. Protection against malevolence 5.4.7. System resources 5.4.8. Requirements for Documentation 5.5. CONTRAINST REQUIREMENTS 5.5.1. Regulation and consumerism 5.5.1.1. Regulation 5.5.1.2. Consumerism 5.5.2. Weight and other physical characteristics 5.5.3. Design and manufactureConception et fabrication 5.5.3.1. Study and/or imposed solutions 5.5.3.2. Matarials 5.5.3.3. Manufacture 5.5.3.4. Marking of products 5.5.4. Traceability and configuration management 5.5.5. Transportability, storage and conditioning 5.5.6. Flexibility and extension 5.5.7. Withdrawal from service 5.5.8. Environmental conditions 5.6. INTEGRATION AND VALIDATION REQUIREMENTS 4 4 4 4 5 5 5 5 5 5 5 7 7 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 11 11 11 11 12 12 12 12 13 18 19 19 19 19 19 19 19
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 4/19
1.OBJECT
The present Normative Technical specification describes the requirements and technical recommendations materials and manufactoring processes which it is advisable to take into account for the body slides of pane.
VEHICLE
SIDE FACE
DOOR
2.FIELD OF APPLICATION
2.1.DEVELOPMENT CONTEXT OF THE SYSTEM
Not applicable.
The specifications materials, coatings and processes described in this STN are evaluated on part.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 5/19
3.DOCUMENTARY REFERENTIAL
3.1.REFERENCE DOCUMENTS 3.1.1.NORMS
Reference A10 0310 A10 2260 B20 0150 B63 0020 ISO 14021 Title NORMATIVE TECHNICAL SPECIFICATION (NTS) - TECHNICAL SPECIFICATION (TS) STANDARD PLAN and DRAFTING GUIDE MARKING OF PRODUCTS FOR PRODUCT/PROCESS DESIGN PRODUCTS WHICH ARE THE SUBJECT OF A PRODUCT APPROVAL SPECIFICATION GENERAL REQUIREMENTS ELASTOMERIC CONSTITUENTS OF RUBBER MIXES CONVENTIONAL DESIGNATIONS ENVIRONMENTAL LABELS AND DECLARATIONS - SELF-DECLARED ENVIRONMENTAL CLAIMS (TYPE 2 ENVIRONMENTAL LABELING)
3.1.2.REGULATIONS
Not applicable.
3.1.3.OTHER DOCUMENTS
Reference PMXP_ECH09_0095 01379_09_00170 Title STAMP HEDGING OF THE GENERIC REQUIREMENTS MATERIALS ANTI-CORROSIVE TECHNICAL SPECIFICATION FOR THE SEALS OF OPENING
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE Reference B20 0250 B20 1315 B20 1415 B30 4420 B62 0020 B62 0300 B71 6000 B74 2640 D10 5495 Title REGULATED SUBSTANCES/MATERIALS AND RESTRICTIONS OF USE WITHIN THE PSA PEUGEOT CITROEN GROUP SUPPLY OF PLASTIC PARTS - IDENTIFICATION MARKING OF MATERIAL FOR RECYCLING PURPOSES SUPPLY OF RUBBER PARTS IDENTIFICATION MARKING OF MATERIALS FOR RECYCLING PURPOSES ASPECT HARMONISE ATTITUDE OF BODY WORK RETAINER WASHERS AND GLAZING FINISHERS THERMOPLASTIC AND THERMOSETTING MATERIALS CONVENTIONAL DESIGNATIONS THERMOPLASTIC, THERMOSETTING MATERIALS THERMOPLASTIC ELASTOMERS AND RUBBERS - CLASSIFICATION AND SPECIFICATION FLUIDS OF ASSEMBLY REFERENCE PARTS FOR TESTS OF CONTROL RATIO MATERIALS BODY SEALS ASSEMBLY AID PRODUCTS MATERIALS IN VEHICLE PASSENGER COMPARTMENT ASSESSMENT OF THE QUANTITY OF VOLATILE ORGANIC COMPOUNDS (VOC) BY THERMODESORPTION/GC/MS (FID) MATERIALS IN VEHICLE PASSENGER COMPARTMENT SEARCH FOR BASIC AMINE TYPE VOLATILES IN POLYURETHANE MATERIALS PARTS IN PASSENGER COMPARTMENT AND BOOT ASSESSMENT OF ODOUR STRENGTH ASSESSMENT AGAINST DAMNING DESCRIPTIVE TERMS COATINGS OF RUBBER PARTS - RESISTANCE TO WEAR RESISTANCE TO ABRASION OF DEPOSITED COATINGS ON BODYWORK SEALS ON THE HAMPDEN TESTER PAINT COATINGS RUBBERS AND PLASTICS ARTIFICIAL AGEING BY WEATHEROMETER PLASTICS - PAINTS - VARNISHES AND SIMILAR PRODUCTS - RUBBERS - NATURAL AGEING TEST FINISHING PAINT COATINGS STAINING BY EXTRACTION OF RUBBER IN CONTACT WITH A GLASS WASH LIQUID PAINT COATINGS AND SIMILAR PRODUCTS STAINING ANALYSIS OF FORMALDEHYDE AND OTHER CARBONYL COMPOUNDS IN THE MATERIALS OF VEHICLE PASSENGER COMPARTMENT BY LIQUID CHROMATOGRAPHY PROTECTIVE STRIPS - FITTING AND REMOVAL FIXED GLASS AND MOBILE PANELS, EXTERIOR GLAZING AND FINISHER SEALS, STRENGTH OF ASSEMBLIES SEALS FOR MOBILE GLASS - SLIDING LOAD RUBBERS RESISTANCE TO TEARING (DELFT TEST SPECIMEN) RUBBERS AND THERMOPLASTIC RUBBERS FRICTION COEFFICIENT MATERIALS AND PARTS IN POLYMER PASSENGER COMPARTMENT INNER AND OUTER COLOUR FASTNESS TO RUBBING B29 6165 6/19
D10 5496 D10 5517 D24 1724 D24 5001 D27 1389 D27 1526 D27 5278 D27 5144 D40 5535
D41 1483 D41 1560 D41 1739 D41 5149 D44 5434 D45 1010
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE Reference D45 1333 D45 5523 D47 1100 D47 1165 D47 1217 D47 1309 D47 1431 D47 5445 Title MATERIALS INTERIOR TO PASSENGER COMPARTMENT HORIZONTAL COMBUSTIBILITY RESISTANCE TO SCRATCHING (SCLEROMETER TEST) RUBBER PARTS AGEING IN OZONISED AIR PRODUCTS APPLIED TO BODY IN WHITE OR PAINT COATED BODY, PLASTICS ACCELERATED AGEING FELTS - PADDING - WOOD FIBRE BEHAVIOUR IN HUMID ATMOSPHERE RESISTANCE TO MICRO-ORGANISMS AUTOMOTIVE EQUIPMENT MATERIALS AND PARTS AGEING FOLLOWING A GIVEN CLIMATIC CYCLE MATERIALS AND PARTS IN THE PASSENGER COMPARTMENT APPEARANCE BEHAVIOUR TO ARTIFICIAL LIGHT AT HIGH AND MEAN TEMPERATURES GLUES AND ADHESIVES APPLIED ON ASSEMBLY RESISTANCE TO FLUID CONTACT PROTECTIVE PRODUCT, PROTECTION REMOVAL AND WINDSHIELD WASHER RUBBERS BLEACHING OF PARTS RUBBERS AND THERMOPLASTIC RUBBERS TENDENCY TO THE BOND ON PARTITION OF RETAINER WASHERS OF BODY WORK AND INTERCHANGE FORMATS - INFORMATION INTERCHANGE REPRESENTATION OF DATES AND TIMES B29 6165 7/19
ISO 8601
3.2.2.REGULATIONS
Reference 1907/2006/CE Title REACH Regulation (EC) n 1907/2006 of the European Parlia ment and the Council of December 18th, 2006 concerning the booking, the evaluation and the authorization of chemical substances VEHICLES OUT OF USE Directive on the vehicles out of use MARKING OF THE PARTS AND MATERIALS Decision of the Commission n 2003/138/CE of Februa ry 27th, 2003 establishing the standards relating to the coding of the components and materials for vehicles.
2000/53/CE 2003/138/CE
3.2.3.OTHER DOCUMENTS
Reference PMXP_ECH08_0245 PMXP_ECH09_0192 01379_09_00267 MASK LIST OF MATERIALS GENERIC TECHNICAL SPECIFICATION MATERIALS FOR PARTS OF THE EXTERNAL PERIMETER CONVEYS GENERIC TECHNICAL SPECIFICATION ANTI-CORROSIVE HUB CAP SIDE FACE Title
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 8/19
4.TERMINOLOGY
A dictionary (glossary) of the main terms and their definitions used within the activities of the Department "Amont Technico-Industriel" can be consulted in-house via the glossary Nectar (http://nectar.inetpsa.com). This glossary is constantly up-dated.
4.1.GLOSSARY
For the requirements of this norm, the following term is defined : Area ofaspect : Any area of the visible part by the customer.
4.2.ACRONYMS
For the needs for this standard, the following and acronyms are defined: ST : FTM : TBBA : COV : TEDA : Technical Specification Material Data Sheet (Fiche Technique Matire in french) para tertio butyle benzoc Acid Volatils Organics Compounds Triethylenediamine
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 9/19
5.REQUIREMENTS
5.1.FUNCTIONAL REQUIREMENTS
Requirements B296165-001 Definitions Ensure the sealing of the cockpit between the pane and the door. Take part at the sight of the side face. Take part in the operation of the mobile pane.
5.2.PERFORMANCE REQUIREMENTS
Requirements B296165-001 Definitions Ensure the sealing of the cockpit between the pane and the door. Take part at the sight of the side face. Take part in the operation of the mobile pane.
5.4.2.LIFESPAN
Not applicable.
5.4.4.DEPENDABILITY
5.4.4.1.Reliability
Not applicable.
5.4.4.2.Maintainability
Not applicable.
5.4.4.3.Availability
Not applicable.
5.4.4.4.Safety
Not applicable.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 10/19
5.4.5.PRODUCT QUALITY
The material must forward a satisfactory aspect to nine
Requirements B296165-002 (equivalent to MAT_VEH_VIS_201) Definitions The slide must forward a satisfactory aspect to nine, in conformity with the standard of aspect (plate ABS, grain P022, black FXT). Requirements: The areas of aspect must forward a uniform aspect and without defect such as stripes, blisters, cracks. Moulds should not forward traces of dissociation or separation. The areas of aspect must be homogeneous in color according to the standard B30 4420 - Harmony of aspect of the seals and the completions glazings The section of the slide must be in conformity with the plan of the part.
The hub cap (if adopted solution) must forward a satisfactory aspect to nine, in conformity with the standard of aspect. Requirements: According to the technique of decoration used.
The hub cap (if adopted solution) must forward a satisfactory aspect after shrinking of temporary film of protection. Requirements: Requirements of the standard B14 6860.
The coatings must forward a satisfactory aspect to nine, in conformity with the standard of aspect. Requirements: The aspect must be homogeneous (evaluation by visual notation). The adherence of the coating on support in a new state must adhere to the requirements of the standard B15 5060 6.1. The behavior with the abrasion of the coating in a new state must adhere to the requirements of the standard B15 5060 6.2. The lengthening of the coating in a new state must adhere to the requirements of the standard B15 5060 6.4.
5.4.7.SYSTEM RESOURCES
Not applicable.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 11/19
Traceability materials/PMXP_ECH08_0245
The matter(s) composing the external bootlicker must be in conformity with those approved. They can be the subject of specific specifications (FTM, SPA,). The Data sheet Matter (FTM) officializes the technical properties for which the raw material was validated. It constitutes, with respect to PSA PEUGEOT CITRON, the reference frame of features and properties stated on the matter considered. The FTM is a support of the needs for information in data materials for the various services of PSA. It also constitutes a support of expert testimony for the laboratories quality machines The Specification of Approved Product (SPA) officializes the technical properties materials evaluated on part. It formalizes the whole of the characteristics produced/processes given by the supplier of the part. This document engages the supplier on the quality of the parts produced and sold with PSA PEUGEOT CITRON.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 12/19
5.5.1.2.Consumerism
Requirements B296165-007 (equivalent to MAT_INT_TMA_111) Definitions Adhere to the list of the prohibited components. Requirement: certify the absence of the following chemical compounds: Bisphenol A, Thio tin, TBBA (acid benzoic para thirdly butyl). Answer the requests or requirements of the rates of the Components. To evaluate the quantity of volatile organic compounds (COV) which are released from materials of the cockpit of the vehicle, in accordance with the standard D10 5495. Requirements: Content of total COV: < 500 g/g q toluene, Summon amines: < 200 g/g q toluene, Content of Trithylnediamine (TEDA): < 100 g/g q toluene, Evaluate the quantity of free amines, in accordance with the standard D10 5496. The quote is carried out according to the coloring of PVC, the test-tubes results are quoted 2 times at a few days of intervals by 2 different people. Requirement: Quote 4/5. B296165-009 (equivalent to MAT_INT_TMA_113) B296165-010 (equivalent to MAT_INT_TMA_114) Adhere to the authorized formaldehyde rate. The formaldehyde rate is evaluated in accordance with the standard D40 5535. Requirement: Formaldehyde rate < 10 mg/kg. Satisfy the services in term with intensity and odorous nature. Evaluate the odorous intensity and the presence of the crippling descriptors, in accordance with the standard D10 5517. Requirements: Odorous intensity 3.5 (nonround note). Nature of the crippling descriptors: Not applicable.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 13/19
5.5.3.2.Matarials
5.5.3.2.1.Materials combustibility Requirements B296165-012 (equivalent to MAT_INT_TMA_103 Combustibility. The test of combustibility is carried out according to the standard D45 1333. Requirements: To nine: speed of combustibility 100 mm/min, To indicate the type of combustion. After 100 H with 100 speed of combustibility 100 mm/min, C: To indicate the type of combustion. After 100 H with 40 and 95% HR: speed of combus tibility 100 mm/min, C To indicate the type of combustion. Definitions
5.5.3.2.2.The material must preserve satisfactory characteristics after ageing without use Requirements B296165-013 (equivalent to MAT_VEH_TMA_301) Definitions The slide must resist the micro-organisms (moulds) If use of green materials Resistance to the micro-organisms according to the standard D47 1217.
Requirements: Quote: No bad smell nor mould after 7 and 30 days. B296165-014 (equivalent to MAT_VEH_TMA_302) The slide should not cause tchage after contact with painting. Staining painting 24:00 with 85 according to th e standard D27 5144. C Requirements: 1st quote 4 according to the grey scale. 2nd quote 4 according to the grey scale.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE Requirements B296165-015 (equivalent to MAT_VEH_TMA_305) Definitions The slide must resist natural ageing (except UV). Whitening according to the standard D47 5531. Requirements: no whitening. quote 4 according to the grey scale. no variation of aspect of water. Ageing in the air ozonized 72 H with 200 ppcm according to the standard D47 1100. B29 6165 14/19
Requirement: No punctures nor of cracks. Dimensional withdrawal (slide without reinforcement), slide assembled on door glazes closed. After 5 climatic cycles according to condition AF of the standard D47 1309. Requirements: The dimensional withdrawal must be 0,5%. No washing away. No the undulation of the lips. The elements brought back on the grip by clippage, mould, injection or joining should not forward traces of dissociation or separation. Corrosion of the metal reinforcement of the grip. Requirement: According to Anti-corrosive Technical specification for the batch hub cap side face out of anodic aluminum or stainless ref. 01379_09_00267. B296165-016 (equivalent to MAT_VEH_TMA_305) The hub cap (if adopted solution) must resist natural ageing (except UV). Requirements: According to the technique of decoration used Requirements of the Anti-corrosive Technical specification for the batch hub cap side face out of anodic aluminum or stainless 01379_09_00267. Requirements of the generic technical specification materials for parts of the external perimeter conveys PMXP_ECH09_0192, 5.5.3.1 .2.3.1. The slide, must resist the behavior in temperature. The slide is placed out of drying oven during 30 min with 110 in position conveys, C, closed pane. Requirements: B296165-018 (equivalent to MAT_EXT_TMA_321) After return to ambient, geometrical conformity and the whole of the functional characteristics must be adhered to. The elements brought back by mould, injection or joining should not forward traces of dissociation or separation.
The slide should not cause staining by decoction in contact with a liquid lavapanes. Tchage by decoction according to the standard D27 5278. Liquid lava-panes of the standard B71 6000. Requirement: Quote 4 according to the grey scale.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE Requirements B296165-019 (equivalent to MAT_INT_VIS_311) Definitions The areas of aspect of the slide must resist UV (interior). B29 6165 15/19
Exhibition to the light - interior Parts cockpit according to the B62 standards 0300 5.1. and D47 1431. Requirements according to level of durability defined by the project: Durability 3 years - 200 H: quote 4 according to the grey scale without turn of color. Durability 5 years - 300 H: quote 4 to 240 H and quote 3/4 to 300 H according to the grey scale without turn of color.
The areas of aspect of the slide must resist UV. Exhibition to the light - external Parts cockpit according to the standard B62 0300 5.3.3.2. and D27 1389. Requirements according to the level of durability defined by the project: Rubbers: Durability 3 years: Quote after cleaning 4 to 3 cycles cleaning according to the grey scale, without turn of color (see foot-note). Durability 5 years: Quote after cleaning 4 to 3 cycles and quote to 5 cycles according to the grey scale, without turn of color (see foot-note).
TPE:
Durability 3 years: Quote after cleaning 4 to 15 cycles according to the grey scale, without turn of color (see foot-note). Durability 5 years: Quote after cleaning 4 to 15 cycles and quote after cleaning 3/4 to 18 cycles according to the grey scale, without turn of color (see foot-note). Variation of the colorimetric characteristics after cleaning compared to the initial state: E 2, b* 0.5, Brillant 1. Durability 3 and 5 years: Quote 4 to 3 cycles according to the grey scale, without turn of color.
Coatings of aspect:
Note: Cleaning before quote is intended to correlate the results obtained under test laboratory with those observed in natural ageing according to the standard D27 1526. Clean the parts or the samples with a solution 50/50 in volume water demineralize-ethanol implemented to a white nonfluffy cotton rag. During cleaning, the rag must be quite impregnated but without excess and the samples or the parts should not undergo specific constraints (friction). B296165-021 (equivalent to MAT_EXT_VIS_322) The hub cap (if adopted solution) must resist UV. Requirements: According to the technique of decoration used. Requirements of the Anti-corrosive Technical specification for the batch hub cap side face out of anodic aluminum or stainless 01379_09_00267. Requirements of the generic technical specification materials for parts of the external perimeter conveys PMXP_ECH09_0192, 5.5.3.1 .2.3.1.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE 5.5.3.2.3.The material must preserve satisfactory characteristics with use Requirements B296165-022 (equivalent to MAT_INT_VIS_414) The coatings must resist wear. Adherence of the coating according to the standard B15 5060 8.2. and D47 1165. Requirement: quote A. Adherence of the coating according to the standard B15 5060 8.2. and D47 5445. Requirement: quote A. Abrasive resistant according to the standard B15 5060 8.1. and D24 1724. Requirement: To nine and after H7 cataplasm, the quote must be 4. Abrasive resistant in Hampden To test, according to the standard D24 5001. Requirement: Resistance 10000 cycles under a charge of 3 kg. Tendency to cold joining on glass. The test is carried out on pane inserted in the higher bit of the slide according to the standard D49 1672. Requirements: the effort of separation to -30 must be 4 N/dm, C no transfer of coating must be observed on the support. Coefficient of friction according to the standard B15 5060 8.4. and D44 5434. Requirements: the coefficients of static and dynamic friction must be 0.5, the difference between the coefficients statics and dynamics must be 0.1, no the stick and slipway. Tests of squealing and cracking. Audible noise with the ear on drying surface (squealing) and dries (cracking). Methodologies to be documented by the supplier. Requirement: No noise. B296165-023 (equivalent to MAT_EXT_VIS_422) The slide (without hub cap) must resist frictions and the products of cleaning. Solidity of the areas of aspect to frictions according to the standard D45 1010. Requirements: B296165-024 (equivalent to MAT_EXT_VIS_422) Dry: degradation = 5. discharging = 5. With soapy water: degradation > 4. Definitions B29 6165 16/19
The hub cap (if adopted solution) must resist frictions and the products of cleaning. Requirements: According to the technique of decoration used. Requirements of the Anti-corrosive Technical specification for the batch hub cap side face out of anodic aluminum or stainless 01379_09_00267. Requirements of the generic technical specification materials for parts of the external perimeter conveys PMXP_ECH09_0192, 5.5.3.1 .2.3.1.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 17/19
Definitions The slide must resist the mechanical solicitations. Effort of update according to the standard D41 1739. Requirement: The requirement to be taken into account is that indicated to the plan. Effort of insertion of pane according to the standard D41 1739. Requirement: The requirement to be taken into account is that indicated to the plan. Tear strength of the lips of sealing according to the standard D41 5149. Requirement: Tear strength 20 N/dm.
The slide (without hub cap) must resist the stripe. If solution TPE: Behavior with the stripe of the areas of aspect according to the standard D45 5523. Requirement: Quote 3/4 pennies a charge of 5 NR.
The hub cap (if adopted solution) must resist the stripe. Requirements: According to the technique of decoration used. Requirements of the Anti-corrosive Technical specification for the batch hub cap side face out of anodic aluminum or stainless 01379_09_00267. Requirements of the generic technical specification materials for parts of the external perimeter conveys PMXP_ECH09_0192, 5.5.3.1 .2.3.1.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 18/19
5.5.3.3.Manufacture
Note: the requirements listed in this paragraph relate to the assembly of the slide on vehicle. Requirements B296165-028 Slide fitted on sheet. Effort of fastening of the grip with the assemblies of test indicated to the plan. Evaluated according to the standard D41 1483. Requirements: The requirement to be taken into account is that indicated to the plan. Without indication with the plan, it must be: Effort of fastening: < 40 N/dm for a thickness of rabbet of 3 mm, Effort of dgrafage: > 70 N/dm for a thickness of rabbet of 1.5 mm. Definitions
The elements brought back on the grip by clippage, mould, injection or joining should not forward traces of dissociation or separation. Slide embedded within the framework of door. Held of the slide on the framework of door with the assemblies of test indicated to the plan.
Requirement: The requirement to be taken into account is that indicated to the plan. Without indication with the plan, it must be: Effort of dgrafage according to the standard D41 1483: > 100 N/dm for a thickness of rabbet of 1.9 mm and 2.7 mm. Effort of installation of the slide on the framework of door with the assemblies of test indicated to the plan. Requirement: The requirement to be taken into account is that indicated to the plan. Without indication with the plan, it must be: Effort of fastening according to the standard D41 1483: < 40 N/dm thickness of rabbet of 2.4 mm and 3.2 mm. Behavior of the sections stuck, welded, moulded. The test is carried out in accordance with the standard D41 1560 in a new state and after wet cataplasm ageing under the conditions H-3 of the testing method D47 1165 (either 3 days with 70 2 conditionin g with - 20 is not useful. C C); C Requirements: To Nine: > 10 daN. After wet cataplasm: > 5 daN. B296165-029 Compatibility with the products of assistance to the assembly. Evaluated according to the standard B74 2640. Requirement: Compatibility with the products of assistance to the assembly used on the sites of manufacture.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE
PSA PEUGEOT - CITRON STN MATERIALS AND PROCESSES FOR SLIDE OF MOBILE PANE B29 6165 19/19
5.5.3.4.Marking of products
Requirements B296165-030 B296165-031 Definitions The marking of the system must be in accordance with the standard B20 0110. The marking of the elements of the date and the hour must be in accordance with the standard ISO 8601. The plastic parts are marked in accordance with the B20 1315 Goods of plastic parts Marking of identification of the matters with a view recycling and in accordance with the Directive 2003/138/CE. The elastomer parts are marked in accordance with the B20 1415 Goods of parts rubber - Marking of identification of the matters with a view recycling and in accordance with the Directive 2003/138/CE. The reference mark matter must be in conformity with the standards B62 0020 Plastics and thermoplastics - conventional Designations.
B296165-032
B296165-033
B296165-034
5.5.8.ENVIRONMENTAL CONDITIONS
Not applicable.
OR : 06/04/2010 A : 15/06/2010
INTERNAL USE