Vous êtes sur la page 1sur 32

ProtectIT Fuse switch disconnector, XLBM 160-630A

Contents
Fuse protection General

1 2

Apparatus and accessories


3.1 Standard apparatus 3.2 IP20 Z-busbar system and apparatus 3.3 Accessories

Technical data

4
Ordering tables

5
Dimensional drawings

InLine
1. Fuse protection
Fuse protection Easy and reliable
The fuse is a superior short circuit protection element regarding the maximum allowed cut-off current (peak let through current) and energy value. This is more important the higher the voltage and prospective fault levels are. The SlimLine switch fuses fulfil the highest requirements for modern switch fuses with a total safety concept. The switch fuses are tested according to the EN 60947-3 standard with more stringent requirements for isolation, making, performance and safety. The melting curves and current limiting diagrams for NH fuse links are given in the IEC 269-2 standard. The standardised fuse characteristics and high degree of current limitation ensure that there is a simple and effective coordination with fuse links and other devices. Fuse links provide a simple procedure for selecting the right fuse type for your installation, without complicated calculations or calculation tools. Fuses prevent "blackouts". Only the fuse nearest a fault trips without upstreams fuses (feeders or mins) being affected. Fuses thus provide selective coordination. When more power is needed in an installation, more feeders can be added without changing the present structure or any new selectivity calculations. Fuse links will assure selectivity in the installation by 1,6:1 difference in the rated current.

No need for calculation tools - Easy and economical selectivity

Economical installation
Lifetime costs of fuse systems are low. Fuse links which can withstand a high fault level and a fault current, are available at economical prices. After fuse operation, only the fuse link has to be changed. Because the fuse links can be rapidly and easily replaced, plant down time and maintenance are substantially reduced with a fuse link system. Because the fusing elements operate in a cylinder, they are not affected by their surroundings. Thus their protecting characteristics remain stable year after year. The dynamic stress on the network and its equipment is dependent of the let through energy (i2t) at a short circuit. The fuse link provides the best protection compared to other solutions, at high short circuit currents. As the fuse link body is filled with quartz sand, there will be no emission of gases or arcs when a short circuit occurs. This again leads to less stress on the network and a higher degree of personal safety.

No moving parts No extra operation time

Fuse protection Easy and reliable


Economical installation Easy and economical selectivity No need for calculation tools No need to change the present structure when more power is needed No moving parts No extra operation time No arc space No emission of gasses at short circuits
5
1SEC312022B0101

InLine
2. General

The new solution for your distribution


Family presentation

InLine is the new generation of vertical fuse rails and fuse switch disconnectors from ABB. ABB has a long history in producing these types of devices, and the first generation was introduced already in 1967. The InLine family consists of fuse rails, single-, and triple pole operated fuse switch disconnectors and incoming/outgoing units.

Areas of applications
Cable distribution cabinets (CDC) Low voltage distribution in secondary transformer substations Distribution boards for industry, housing and office buildings

Inplan
InPlan is a software tool for planning and designing InLine applications. It may be used to have: - Front view diagram - Single line diagram - Material list These can all be printed and used for documentation and offers where InLine is used.

Applications
Cable distribution cabinets Low voltage distribution in transformer secondary substations Switchboards for industries Installations

6
1SEC312022B0201

InLine
2. General
Properties
Fully type tested in accordance with IEC 60947-3 Compact 48 and 98 mm width 185mm busbar distance For flat or IP20 z-profile busbar Wide range of accessories Possibility of top, bottom or side cable connection IP20 from the front Available with Electronic Fuse Monitoring (EFM) Current metering on both the cable and busbar side Safe live installation with IP20 system V0 flame retardant materials

Advantages
Complete range for all applications Modern and sturdy design Flexibility snap on solutions

Industrial IT describes the ABB group commitment to bridging the gap between industrial and business assets and the information technology (IT) required to integrate these components in real time. The commitment encompasses a portfolio of compatible technologies for power, automation, and information; a robust, open architecture for integrated solutions; plus the domain expertise acquired through more than 100 years of meeting customer needs. This product has been certified by ABB Group as Industrial IT nabled - Information Level. All product information is supplied in interactive electronic format, based on ABB Aspect Object technology. The Industrial IT commitment from ABB ensures that every enterprise building block is equipped with the integral tools necessary to install, operate, and maintain it efficiently throughout the product lifecycle.
7
1SEC312022B0201

InLine
3. Apparatus and accessories
3.1 Standard apparatus XUBM fuse rail

XUBM00-100 Fuse link Rated current NH00 160 A

XUBM00 NH00 160 A

XUBM1/2/3 NH1/2/3 250 A 400 A 630 A 100 mm 95 - 240 3 x M12 XUBM1 1SEP102111R0101 XUBM2 1SEP102112R0101 XUBM3 1SEP102113R0101

Module width Cable Al / Cu mm2 Cable terminal Order code


1

50 mm ) ) 1,5 - 95 3 x M8 1SEP101836R0001

50 mm 1,5 - 95 3 x M8 1SEP10211R0101

1. Cable lugs in accordance with DIN 46235 and DIN 46239. 2. Cable clamps are available as accessories.

8
1SEC312022B0201

InLine
3. Apparatus and accessories
3.1 Standard apparatus XLBM fuse switch disconnector

XLBM00-3P-100 Fuse link Rated current NH00 160 A

XLBM00-1P NH00 160 A

XLBM00-3P NH00 160 A

XLBM1/2/3-1P NH1/2/3 250 A 400 A 630 A 100 mm 95 - 240 3 x M12


XLBM1 1SEP102141R0101 XLBM2 1SEP102142R0101 XLBM3 1SEP102143R0101

XLM1/2/3-3P NH1/2/3 250 A 400 A 630 A 100 mm 95 - 240 3 x M12


XLBM1 1SEP102141R0121 XLBM2 1SEP102142R0121 XLBM3 1SEP102143R0121

Module width Cable Al / Cu mm Cable terminal Order code


2 1 2

50 mm ) 1,5 - 95 3 x M8
1SEP101818R0001

50 mm 1,5 - 95 3 x M8 1SEP102140R0101

50 mm 1,5 - 95 3 x M8
1SEP102140R0101

1. Cable lugs in accordance with DIN 46235 and DIN 46239. 2. Cable clamps are available as accessories.

9
1SEC312022B0201

InLine
3. Apparatus and accessories
3.1 Standard apparatus Guide marks
In the back of the fuse rail it is printed guide marks. This makes it easier to mark drilling holes in the busbars.

Hooked clamp
It is possible to install the fuse rail with hooked clamp on live busbar. This feature is further described in the IP20 Z-busbar system chapter. The hooked clamp do not require bolts in the busbars. This enables an easy and quick installation. The hooked clamp covers all busbar widths up to 10 mm.

Top/bottom cable termination

Fixing the fuse switch housing

2
90

1
M12

25Nm

1SEB000107

10
1SEC312022B0201

InLine
3. Apparatus and accessories
3.1 Standard apparatus

Common features XLBM

Sealing

Padlock closed position

Voltage measurement

Interlocked by use of cable shroud

Padlock open position


11
1SEC312022B0201

InLine
3. Apparatus and accessories
3.2 IP20 Z-busbar system and apparatus

IP20 Z-busbars, type BZ


Z-busbars for 400/630 A. The busbar kit includes: Busbar L1, L2 and L3 Two busbar holders The Z-busbars are completely IP20 protected.

Type BZ 400 A
BZ 400A/284 BZ 400A/536 BZ 400A/851 BZ 400A/1201

Rated current

Width

Order code

400 A 400 A 400 A 400 A

284 mm 536 mm 851 mm 1201 mm

1SEP824063R0001 1SEP824064R0001 1SEP824065R0001 1SEP824066R0001

BZ 630 A
BZ 630A/284 BZ 630A/536 BZ 630A/851 BZ 630A/1201 630 A 630 A 630 A 630 A 284 mm 536 mm 851 mm 1201 mm 1SEP824067R0001 1SEP824068R0001 1SEP824069R0001 1SEP824070R0001

XUBM-Z and XLBM-Z may be hooked on: Z busbars type BZ Standard flat Cu-bars
12
1SEC312022B0201

InLine
3. Apparatus and accessories
3.2 IP20 Z-busbar system and apparatus

XUBM-Z fuse rails

XUBM00-Z Fuse link Rated current NH00 160 A

XUBM1/2/3-Z NH1/2/3 250 A 400 A 630 A 100 mm 95 - 240 3 x M12 1SEP102111R0201 1SEP102111R0121 1SEP102112R0121

XUBM1/2/3-ZS NH1/2/3 250 A 400 A 630 A 150 mm 50 - 300 Clamps 1SEP102111R0405 1SEP102112R0405 1SEP102111R0405

Module width Cable Al / Cu mm2 Cable terminal Order code

50 mm 1,5 - 95 3 x M8 1SEP102110R0201

13
1SEC312022B0201

InLine
3. Apparatus and accessories
3.2 IP20 Z-busbar system and apparatus XLBM 1 pole-Z fuse switch disconnector

XLBM00-1P-Z Fuse link Rated current NH00 160 A

XLBM1/2/31PZ NH1/2/3 250 A 400 A 630 A 100 mm 95 - 240 3 x M12 1SEP102141R0201 1SEP102141R0201 1SEP102142R0201

XLBM1/2/3-1P-ZS NH1/2/3 250 A 400 A 630 A 150 mm 50 - 300 Clamps 1SEP102141R0401 1SEP102142R0401 1SEP102143R0401

XLBM1/2/3-1P-Z2S NH1/2/3 250 A 400 A 630 A 208 2 x 50 - 300 Clamps 1SEP102141R0501 1SEP102142R0501 1SEP102143R0501

Module width Cable Al / Cu mm2 Cable terminal Order code

50 mm 1,5 - 95 3 x M8 1SEP102140R0201

14
1SEC312022B0201

InLine
3. Apparatus and accessories
3.2 IP20 Z-busbar system and apparatus XLBM 3 pole-Z fuse switch disconnector

XLBM00-3P-Z Fuse link Rated current NH00 160 A

XLBM1/2/3-3P-Z NH1/2/3 250 A 400 A 630 A 100 mm 95 - 240 3 x M12 1SEP102141R0221 1SEP102142R0221 1SEP102142R0221

XLBM1/2/3-3P-ZS NH1/2/3 250 A 400 A 630 A 150 mm 50 - 300 Clamps 1SEP102141R0421 1SEP102142R0421 1SEP102143R0421

XLBM1/2/3-3P-Z2S NH1/2/3 250 A 400 A 630 A 208 mm 2 x 50 - 300 Clamps 1SEP102141R0521 1SEP102142R0521 1SEP102143R0521

Module width Cable Al / Cu mm2 Cable terminal Order code

50 mm 1,5 - 95 3 x M8 1SEP102140R0221

15
1SEC312022B0201

InLine
3. Apparatus and accessories
3.2 IP20 Z-busbar system and apparatus Modules with hooked clamp (Z)

Diazed fuse rail

Feeding clamp for IP20 Z-busbar

Rated current Module width Cable Al / Cu mm2 Order code

AKZD 95 160 A 35 mm 6 - 95 / 2 x 6 - 50 1SEP731594R0001

AKKZ 300 630 A 55 mm 50 - 300 1SEP731521R0001

LDL 63/3 63 A 105 mm 6 - 25 1SEP731530R0001

16
1SEC312022B0201

InLine
3. Apparatus and accessories
3.2 IP20 Z-busbar system and apparatus
Load break switch, switch fuse and sectionalising load break switch

Type

Item description

Rated current A
160 250 400 630 160 250 400 630 160 250 400 630 160 250 400 630

Cu/Al mm2
1,5 - 95 1,5 - 95 50 - 300 50 - 300 1,5 - 95 50 - 300 50 - 300 50 - 300

Module width
168 168 217 245 168 217 245 301 168 168 217 245 168 217 245 301

Order code

LB 160 LB 250 LB 400 LB 630 FLS 160 FLS 250 FLS 400 FLS 630 LS 160 LS 250 LS 400 LS 630 FSS 160 FSS 250 FSS 400 FSS 630

160A load break switch 250A load break switch 400A load break switch 630A load break switch 160A switch fuse 250A switch fuse 400A switch fuse 630A switch fuse 160A load break switch-sectionallizer 250A load break switch-sectionallizer 400A load break switch-sectionallizer 630A load break switch-sectionallizer 160A switch fuse - sectionallizer 250A switch fuse - sectionallizer 400A switch fuse - sectionallizer 630A switch fuse - sectionallizer

1SEP731800R0001 1SEP731802R0001 1SEP731804R0001 1SEP731806R0001 1SEP731808R0001 1SEP731810R0001 1SEP731812R0001 1SEP731814R0001 1SEP731816R0001 1SEP731818R0001 1SEP731820R0001 1SEP731822R0001 1SEP731824R0001 1SEP731826R0001 1SEP731828R0001 1SEP731830R0001

17
1SEC312022B0201

InLine
3. Apparatus and accessories
3.2 IP20 Z-busbar system and apparatus

Fuse Monitoring
Electronic Fuse Monitoring (EFM)
The fuse monitor is a fuse blown monitoring and indication device. The voltage supply to the internal electronic device is supported directly by connection to the internal fuse holders. In case of a blown fuse, the internal relay will trip for giving possible remote alarm. Aditionally the green LED lamp in the front will change to red. After replacement to a new fuse link, the relay will automatically be reset. NOTE: The fuse monitor requires supply from the busbar side.

3
Technical data : Minimum operation voltage: Maximum operation voltage: Uimp over a blown fuse : Uimp between phases : Uimp between main circuit/ relay contacts. : Dielectric test voltage input / output : Electrostatic Discharge : Electrical Fast Transient: Conducted Fast transient: Wire size : EMC tested: Relay: Nominal current: Nominal switching capacity: Maximum switching voltage: 380 690V 12,3 kV 9.8 kV 9.8 kV 3.5 kV / 50 Hz / 1 minute EN61000-4-2 +/- 4 kV. EN61000-4-4 +/- 2 kV EN61000-4-6 10Vrms / 150kHz 80 MHz 15 mm2 Yes

8 amp 2000VA, AC1 440V AC, 250V DC

LED Fuse Monitoring (LFM)


For simple visible front monitoring of the fuse status, a special LED fuse monitor kit is available. In case of a blown fuse an LED will be ignited in the front cover at the actual phase. Available as accessory.

1SEB000110

18
1SEC312022B0201

InLine
3. Apparatus and accessories
3.3 Accessories

Accessories XUBM

Phase barrier kit


for segregation of each phase possibility for outlet description

Fuse protection cover


IP20 protection during service work require phase barrier kit

Cable shroud

19
1SEC312022B0201

InLine
3. Apparatus and accessories
3.3 Accessories

Accessories XLBM - Current meetering

Selector switch

Ammeter house

available for size 00 (48x48) and size 1/2/3 (72x72) extendable

Rear side installation


kit including extension bar and CT for 3 phases

Front installation
compact fuse for CT and plug-in ammeter available for size 1/2

Terminal installation
kit including extension bar and CT for 1 phase available for size 1/2/3

20
1SEC312022B0201

InLine
3. Apparatus and accessories
3.3 Accessories

Accessories XLBM

Lable holder

Huckepack
for temporary additional output

Micro switch
one or two per phase

Auxiliary switch

Cable shroud
21
1SEC312022B0201

InLine
3. Apparatus and accessories
3.3 Accessories

Cable termination
Conductor cross section min-max Type of clamp/bolt Conductor flexible mm2 Rm/Sm mm2 Re/Se mm2 Torque (Nm) Order code

XLBM / XUBM00

Bridge Clamp (BC)

1,5 50

1,5 50

1,5 50

3,5

1SEP407733R0001

3
Single Prism Clamp (SPC) 1,5 95 1,5 95 1,5 95 3,5 1SEP407732R0005

XLBM / XUBM1/2/3

V-clamp kit

95 240

95 240

95 240

25

1SEP304446R0001

Double V-clamp kit

2 x 95 240

2 x 50 185 2 x 95 240

2 x 70 240 2 x 120 300

25

1SEP304457R0001

Double cable lug kit

2 x 95 240

2 x 70 240

2 x 70 240

25

1SEP304502R0001

22
1SEC312022B0201

InLine
4. Technical data

XUBM Fuse rails


XUBM00 For HRC fuse links acc. to IEC 60269-2-1. Rated operational voltage Ue Rated operational current Ie Rated insulation voltage Ui Conditional short circuit current with fuse links. Rated frequency. Degree of protection from the front acc. to IEC 60529. *)
*) With fuse protection cover or isolated gripping lugs

XUBM1

XUBM2

XUBM3

00 (V) (A) (V) 690 160 1000

1 690 250 1000

2 690 400 1000

3 690 630 1000

(kArms) (Hz)

50 50-60

50 50-60

50 50-60

50 50-60

IP 20

IP 20

IP 20

IP 20

XLBM Fuse switch disconnector


XLBM00 For HRC fuse links acc. to IEC 60269-2-1. Rated operational voltage Ue Rated operational current Ie Thermal current w/fuse link lth Rated insulation voltage Ui Rated impulse withstand voltage Uimp Fuse protected short circuit withstand Fuse protected short circuit making Rated making and breaking capacity: Rated frequency. Power losses at Ith without fuse-link Degree of protection from the front acc. to IEC 60529. (Hz) (V) (A) (A) (V) (kV) (kArms) (kArms) XLBM1 XLBM2 XLBM3

00 400 500 160 160 160 1000 8 50 50


AC23B AC22B AC21B

1 690 125

400 500 690 400 500 690 400 500 690 200 250 200 315 400 315 500 630 500 250 1000 8 50 50 400 1000 8 50 50 630 1000 8 50 50

AC23B AC22B AC21B AC23B AC22B AC21B AC23B AC22B AC21B

50-60

50-60

50-60

50-60

(W) Open Closed

16,1 IP 20 IP 30

16,9 IP 20 IP 30

36,8 IP 20 IP 30

75,4 IP 20 IP 30
23
1SEC312022B0201

InLine
5. Ordering tables
Order number Type designation Item description Weight
Per unit (kg)

XUBM / XLBM
Fuse rail - XUBM
1SEP102110R0101 1SEP101836R0001 1SEP102100R0101 1SEP102111R0101 1SEP102101R0101 1 1SEP102112R0101 1SEP102102R0101 1SEP102113R0101 1SEP102103R0101 XUBM00 XUBM00-100 XUBM00-R XUBM1 XUBM1-R XUBM2 XUBM2-R XUBM3 XUBM3-R 160A incl. 3M8 160A 100mm busbardist. incl. 3M8 160A wo. contact shrouds, incl. 3M8 250A incl. 3M12 250A wo. contact shrouds, incl. 3M12 400A incl. 3M12 400A wo. contact shrouds, incl. 3M12 630A incl. 3M12 630A wo. contact shrouds, incl. 3M12 1,5 1,0 1,3 2,9 2,5 3,4 3,1 3,9 3,6

Fuse switch disconnector - XLBM 1pole


1SEP102140R0101 1SEP102140R0111 1SEP102141R0101 1SEP102141R0111 2 1SEP102142R0101 1SEP102142R0111 1SEP102143R0101 1SEP102143R0111 XLBM00-1P XLBM00-1P-EFM XLBM1-1P XLBM1-1P-EFM XLBM2-1P XLBM2-1P-EFM XLBM3-1P XLBM3-1P-EFM 160A 1 pole, incl. 3M8 160A 1pole, incl. EFM, incl. 3M8 250A 1 pole, incl. 3M12 250A 1pole, incl. EFM, incl. 3M12 400A 1 pole, incl. 3M12 400A 1pole, incl. EFM, incl. 3M12 630A 1 pole, incl. 3M12 630A 1pole, incl. EFM, incl. 3M12 2,2 2,3 4,2 4,4 4,7 4,9 5,2 5,4

Fuse switch disconnector - XLBM 3pole


1SEP102140R0121 1SEP101818R0001 1SEP102140R0131 1SEP102141R0121 XLBM00-3P XLBM00-3P-100 XLBM00-3P-EFM XLBM1-3P XLBM1-3P-EFM XLBM2-3P XLBM2-3P-EFM XLBM3-3P XLBM3-3P-EFM 160A 3pole, incl. 3M8 160A 3pole, 100mm busbardist. incl. 3M8 160A 3pole, incl. EFM, incl. 3M8 250A 3pole, incl. 3M12 250A 3pole, incl. EFM, incl. 3M12 400A 3pole, incl. 3M12 400A 3pole, incl. EFM, incl. 3M12 630A 3pole, incl. 3M12 630A 3pole, incl. EFM, incl. 3M12 2,3 1,6 2,4 4,3 4,5 4,8 5,0 5,3 5,5

2
3

1SEP102141R0131 1SEP102142R0121 1SEP102142R0131 1SEP102143R0121 1SEP102143R0131

Explanation: XUBM XLBM XLBM-2 XUBM-2-R XLBM-2-1P 3 = Fuse rail = Fuse switch disconnector = Apparatus size = Fuse rail without contact shrouds = Number of operating poles

XLBM-2-1P-EFM = Electronic fuse monitoring XLBM-2-Z XLBM-2-ZS XLBM-2-Z2S = Hooked clamp = Hooked clamp and side connection = Hooked clamp and double side connection

24
1SEC312022B0201

InLine
5. Ordering tables
Order number Type designation Item description Weight
Per unit (kg)

XUBM / XLBM with hooked clamps for IP20 Z- busbar systems


Fuse rail - XUBM with hooked clamp (Z) 1SEP102110R0201 XUBM00-Z 1SEP102111R0201 XUBM1-Z 1SEP102111R0405 XUBM1-ZS 1 1SEP102112R0201 XUBM2-Z 1SEP102112R0405 XUBM2-ZS 1SEP102113R0201 XUBM3-Z 1SEP102113R0405 XUBM3-ZS 160A w. hooked clamp, incl. 3M8 250A w. hooked clamp, incl. 3M12 250A w. hooked clamp, side connection, incl. 3 clamps 400A w. hooked clamp, incl. 3M12 400A w. hooked clamp, side connection, incl. 3 clamps 630A w. hooked clamp, incl. 3M12 630A w. hooked clamp, side connection, incl. 3M12 1,7 3,2 3,2 3,8 3,7 4,2 4,1

Fuse switch disconnector - XLBM 1pole with hooked clamp (Z) 1SEP102140R0201 XLBM00-1P-Z 160A 1pole, w. hooked clamp, incl. 3M8 1SEP102140R0211 XLBM00-1P-EFM-Z 160A 1 pole, incl. EFM, w. hooked clamp, incl. 3M8 1SEP102141R0201 XLBM1-1P-Z 250A 1pole, w. hooked clamp, incl. 3M12 1SEP102141R0211 XLBM1-1P-EFM-Z 250A 1pole, incl. EFM, w. hooked clamp, incl. 3M12 1SEP102141R0401 XLBM1-1P-ZS 250A 1pole, w. hooked clamp, side connection, incl. 3 clamps 1SEP102141R0501 XLBM1-1P-Z2S 250A 1pole, w. hooked clamp, double side connection, incl. 6 clamps 1SEP102142R0201 XLBM2-1P-Z 400A 1pole, w. hooked clamp, incl. 3M12 1SEP102142R0211 XLBM2-1P-EFM-Z 400A 1pole, incl. EFM, w. hooked clamp, incl. 3M12 1SEP102142R0401 XLBM2-1P-ZS 400A 1pole, w. hooked clamp, side connection, incl. 3 clamps 1SEP102142R0501 XLBM2-1P-Z2S 400A 1pole, w. hooked clamp, double side connection, incl. 6 clamps 1SEP102143R0201 XLBM3-1P-Z 630A 1pole, w. hooked clamp, incl. 3M12 1SEP102143R0211 XLBM3-1P-EFM-Z 630A 1pole, incl. EFM, w. hooked clamp, incl. 3M12 1SEP102143R0401 XLBM3-1P-ZS 630A 1pole, w. hooked clamp, side connection, incl. 3 clamps 1SEP102143R0501 XLBM3-1P-Z2S 630A 1pole, w. hooked clamp, double side connection, incl. 6 clamps Fuse switch disconnector - XLBM 3pole with hooked clamp (Z) 1SEP102140R0221 XLBM00-3P-Z 160A 3pole, w. hooked clamp, incl. 3M8 1SEP102140R0231 XLBM00-3P-EFM-Z 160A 3pole, incl. EFM, w. hooked clamp, incl. 3M8 1SEP102141R0221 XLBM1-3P-Z 250A 3pole, w. hooked clamp, incl. 3M12 1SEP102141R0231 XLBM1-3P-EFM-Z 250A 3pole, incl. EFM, w. hooked clamp, incl. 3M12 1SEP102141R0421 XLBM1-3P-ZS 250A 3pole, w. hooked clamp, side connection, incl. 3 clamps 1SEP102141R0521 XLBM1-3P-Z2S 250A 3pole, w. hooked clamp, double side connection, incl. 6 clamps 1SEP102142R0221 XLBM2-3P-Z 400A 3pole, w. hooked clamp, incl. 3M12 1SEP102142R0231 XLBM2-3P-EFM-Z 400A 3pole, incl. EFM, w. hooked clamp, incl. 3M12 2 1SEP102142R0421 XLBM2-3P-ZS 400A 3pole, w. hooked clamp, side connection, incl. 3 clamps 1SEP102142R0521 XLBM2-3P-Z2S 400A 3pole, w. hooked clamp, double side connection, incl. 6 clamps 1SEP102143R0221 XLBM3-3P-Z 630A 3pole, w. hooked clamp, incl. 3M12 1SEP102143R0231 XLBM3-3P-EFM-Z 630A 3pole, incl. EFM, w. hooked clamp, incl. 3M12 1SEP102143R0421 XLBM3-3P-ZS 630A 3pole, w. hooked clamp, side connection, incl. 3 clamps 1SEP102143R0521 XLBM3-3P-Z2S 630A 3pole, w. hooked clamp, double side connection, incl. 6 clamps Modules with hooked clamp (Z) 1SEP731800R0001 LB 160 1SEP731802R0001 LB250 1SEP731804R0001 LB 400 1SEP731806R0001 LB 630 3 1SEP731808R0001 FLS 160 1SEP731810R0001 FLS 250 1SEP731812R0001 FLS 400 1SEP731814R0001 FLS 630 1SEP731816R0001 LS 160 1SEP731818R0001 LS 250 1SEP731820R0001 LS 400 1SEP731822R0001 LS 630 1SEP731824R0001 FSS 160 1SEP731826R0001 FSS 250 1SEP731828R0001 FSS 400 1SEP731830R0001 FSS 630 1SEP731530R0001 LDL 63/3 1SEP731594R0001 AKZD 95 1SEP731521R0001 AKKZ 300 Kit of IP20 Z-busbars 1SEP824063R0001 1SEP824064R0001 1SEP824065R0001 4 1SEP824066R0001 1SEP824067R0001 1SEP824068R0001 1SEP824069R0001 1SEP824070R0001

2,4 2,5 4,5 4,7 4,5 5,8 5,1 4,9 5,0 6,3 5,5 5,7 5,4 6,7

2,5 2,6 4,6 4,8 4,6 5,8 5,2 5,4 5,1 6,3 5,6 5,8 5,5 6,7

160A load break switch 250A load break switch 400A load break switch 630A load break switch 160A switch fuse 250A switch fuse 400A switch fuse 630A switch fuse 160A load break switch-sectionallizer 250A load break switch-sectionallizer 400A load break switch-sectionallizer 630A load break switch-sectionallizer 160A switch fuse -sectionallizer 250A switch fuse -sectionallizer 400A switch fuse -sectionallizer 630A switch fuse -sectionallizer 63A diazed unit w. 3 groups Direct incomer Direct incomer

0,1 0,4

BZ 400A/284 BZ 400A/536 BZ 400A/851 BZ 400A/1201 BZ 630A/284 BZ 630A/536 BZ 630A/851 BZ 630A/1201

400A/284mm, incl. IP20 busbars&holders 400A/536mm, incl. IP20 busbars&holders 400A/851mm, incl. IP20 busbars&holders 400A/1201mm, incl. IP20 busbars&holders 630A/284mm, incl. IP20 busbars&holders 630A/536mm, incl. IP20 busbars&holders 630A/851mm, incl. IP20 busbars&holders 630A/1201mm, incl. IP20 busbars&holders

25
1SEC312022B0201

InLine
5. Ordering tables
Order number Type designation Item description Weight
Per unit (kg)

Accessories XUBM /XLBM


Accessories for XLBM/XUBM 00 1SEP304069R0001 00 Blind cover adjustable 1SEP201543R0001 00 Fuse cover 1SEP408124R0001 XUBM00 Cable shroud 1 1SEP408126R0001 XLBM00 Cable shroud 1SEP408128R0001 XLBM00 Cable shroud short 2 1SEP408139R0001 00 Label holder 1SEP304442R0001 XUBM00 Phase barrier kit 1SEP407733R0001 00 Bridge clamp (3BC) 1SEP407732R0005 00 Single prism clamp (3PC) 1SEP304072R0001 00 Adapter for 185mm busbar 3 1SEP304071R0001 00 Adapter for 185mm busbar 1SEP408141R0001 00 A-meter house QB48 NHSN714003P1150 Max A-meter QB48, 0-150-180/5A 1SEP408149R0001 CT busbar kit 160/5A Accessories for XLBM/XUBM 1, 2, 3 1SEP304080R0001 1,2,3 Blind cover 1SEP201499R0001 1,2,3 Fuse cover 1SEP408125R0001 XUBM1,2,3 Cable shroud 1SEP408127R0001 XLBM1,2,3 Cable shroud 1SEP304395R0001 XUBM1,2,3 Phase barrier kit 1SEP408140R0001 1,2,3 Label holder 1SEP407946R0001 XLBM1,2,3 Operated fuse indicator (LFM) NHSN722068P0002 1,2,3 Huckepack 1SEP304446R0001 1,2,3 V-clamp kit 1SEP304457R0001 1,2,3 Double V-clamp kit 1SEP304502R0001 1,2,3 Double cable lug kit 4 1SEP408142R0001 1,2,3 A-meter house, IQB72 NHSN714004P2206 Max A-meter QB72, 0-150-180/5A NHSN714004P2210 Max A-meter QB72, 0-400-480/5A NHSN714004P2212 Max A-meter QB72, 0-600-720/5A 1SEP408149R0002 CT busbar mounted kit 250A/5A 1SEP408149R0003 CT busbar mounted kit 400A/5A 1SEP408149R0004 CT busbar mounted kit 600A/5A 1SEP408149R0005 CT busbar mounted kit 600A/5A 1SEP408149R0006 CT terminal mounted kit 160/5A 1SEP408149R0007 CT terminal mounted kit 250/5A 1SEP408149R0008 CT terminal mounted kit 400/5A 1SEP408149R0009 CT terminal mounted kit 600/5A 1SEP408149R0010 CT terminal mounted kit 600/5A NHPL046270R0002 A-meter front cover mounted 100-200/5A NHPL046270R0001 A-meter front cover mounted 200-400/5A NHPL046265R0001 NH2 Fuse link 400V/100A for CT NHPL046266R0001 NH2 Fuse link 400V/125A for CT NHPL046267R0001 NH2 Fuse link 400V/160A for CT NHPL046268R0001 NH2 Fuse link 400V/200A for CT 5 NHPL046269R0001 NH2 Fuse link 400V/224A for CT NHPL046272R0001 NH2 Fuse link 400V/250A for CT NHPL046273R0001 NH2 Fuse link 400V/315A for CT NHPL046274R0001 NH2 Fuse link 400V/335A for CT NHPL046275R0001 NH2 Fuse link 400V/400A for CT 6 NHSN718050P2525 CT for front mounted A-meter 250/5A NHSN718050P2540 CT for front mounted A-meter 400/5A Accessories XUBM/XLBM00-100 1SEP304058R0001 00-100 Cable shroud 1SEP304061R0001 00-100 Cable shroud for special clamps 1SEP304068R0001 00-100 Label holder 1SEP304105R0001 00-100 Phase barrier kit 1SEP304056R0001 00-100 Prism clamp kit 1SEP304067R0001 00-100 Height alignment kit 1SEP304060R0001 00-100 Micro switch 1SEP304064R0001 00-100 Adapter for 60mm busbar 1SEP304066R0001 00-100 Adapter for 185mm busbar 7 1SEP304065R0001 00-100 Adapter for 185mm busbar, double 1SEP304059R0001 00-100 Hooked clamp Common accessories NHSN950001P0006 8 1SEP407742R0001 9 1SEP407742R0002 1SEP407742R0003 0,2 0,3 0,2 0,2 0,1 0,1 0,1 0,1 0,1 0,4 0,7 0,1 0,1 1,1

Lenght 185mm Lenght 64mm Kit incl. 2 pcs. Kit incl. 3 pcs. 1,5-50 mm2 Kit incl. 3 pcs. 1,5-95 mm2 Single Double For A-meter 48x48mm Kit incl. 3 pcs. 2,5VA cl.1

Kit incl. 2 pcs. Kit incl. 3 pcs. Temporary supply outlet Kit incl. 3 pcs. Kit incl. 3 pcs. For A-meter 72x72mm

5
6

Kit incl. 3 pcs. 3,75VA cl.1 Kit incl. 3 pcs. 5VA cl.1 Kit incl. 3 pcs. 5VA cl.1 Kit incl. 3 pcs. 5VA cl.0,5 Kit incl. 1 pc. 2,5VA cl.1 Kit incl. 1 pc. 3,75VA cl.1 Kit incl. 1 pc. 5VA cl.1 Kit incl. 1 pc. 5VA cl.1 Kit incl. 1 pc. 5VA cl.0,5

0,3 0,4 0,3 0,2 0,2 0,1 0,1 0,3 0,5 0,5 0,5 0,1 0,2 0,2 0,2 1,3 1,3 1,3 1,3 0,6 0,6 0,6 0,6 0,6 0,2 0,2 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,1 0,1

Kit incl. 3 pcs. Kit incl. 3 pcs.

Kit incl. 3 pcs.

0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,3 0,4 0,7 0,1

Insulated hexagon key NV6 Micro switch Auxiliary switch NC Auxiliary switch NO

6A/150V 10A/690V 10A/690V

0,1 0,1 0,1 0,1

26
1SEC312022B0201

InLine
6. Dimensional drawings

XUBM00-100

XLBM00-3P-100

XUBM00

XUBM1/2/3

27
1SEC312022B0201

InLine
6. Dimensional drawings

XLBM00-1P

XLBM00-3P

XLBM1/2/3-1P

XLBM1/2/3-3P

28
1SEC312022B0201

InLine
6. Dimensional drawings

XUBM00-Z

XLBM00-3P-Z

XLBM1/2/3-3P-Z

29
1SEC312022B0201

InLine
6. Dimensional drawings

XLBM1/2/3-3P-ZS

XLBM1/2/3-3P-Z2S

30
1SEC312022B0201

InLine
6. Dimensional drawings

Accessories Size 00

Cable shroud XUBM

Cable shroud XLBM

Cable shroud short Ammeter house

EFM

Label holder

31
1SEC312022B0201

InLine
6. Dimensional drawings

Accessories Size 1/2/3

Cable shroud XLBM

Cable shroud XUBM

Label holder

6
EFM housing Ammeter house

A part of its on-going product improvement, ABB reserves the right to modify the characteristics or the products described in this brochure. The information given is notcontractual. For further details please contact the ABB company marketing theese products in your country.

P.O. Box 100, Sentrum, N-3701 Skien, Norway Tel. +47 35 58 25 00 Fax +47 35 58 28 00 e-mail: abb.control@no.abb.com www.abb.com

May 2003 Print: Rasmussen, Skien

ABB AS Low Voltage Products Automation Technologies Division

1SEC312022B0201

Vous aimerez peut-être aussi