Vous êtes sur la page 1sur 1

ES-Heating-PEX-Tubing

For Residential, Commercial Radiant Heating and Snow Melt Applications


Job Name Job Location Engineer Approval Contractor Approval Contractors P.O. No. Representative

Heating PEX
Sizes:  1/2" (12.7 mm) 3/4" (19.1 mm) 1" (25.4 mm)

EVOH

Cross-linked Polyethylene Tubing

Adhesive

PEX

Watts Heating PEX is cross-linked polyethylene tubing used for radiant floor heating, snow melting, and distribution piping. Heating PEX is manufactured with an integral ethylene vinyl alcohol (EVOH) DIN Standard O2 barrier that limits oxygen diffusion through the walls of the tubing to less than 0.10g/m3/day at 104.0F (40.0C) water temperature.

Specifications
System shall be installed using Watts Heating PEX tubing. All connections shall be made using Watts CinchClamp or Compression fittings of corresponding size and in accordance with all corresponding installation guidelines.
Max Temperature 200.0F (93.3C) 180.0F (82.2C) 73.4F (22.7C) max pressure 80 psi (5.5 bar) 100 psi (6.9 bar) 160 psi (11.0 bar)

Codes Listings and Standards Heating PEX is manufactured ASTM F876-09 and F877  standards and to SDR-9 dimensions. Heating PEX conforms to ASTM E84 and UL263. Heating PEX is listed by the International Code Council Evaluation Service (ICC) to Report #ESR-1155 and PMG1008 which give compliance to IPC/IMC, UPC/UMC. Heating PEX is tested and listed by the National rfh Sanitation Foundation to NSF-14 (rfh).

Installation Parameters
Heating PEX must be installed in accordance with all installation procedures, including information provided in Watts Heating PEX and Heating PEX-AL-PEX Installation manual.
!

CAUTION All Heating PEX is certified to CSA Standard B137.5.

This Engineering Sheet is not intended to provide full installation instructions and safety information. In order to avoid property damage or injury, please refer to the complete installation manual and product safety information provided with the product.

Qty.

Order # 0959352 0959351 0959402 0959403 0959349 0959350 0959404 0959405 0959354 0959353

Description 1/2" (12.7 mm) Heating PEX

ID (in.) 0.485" (12.3 mm)

OD (in.) 5/8" (15.6 mm)

3/4" (19.1 mm) Heating PEX 1" (25.4 mm) Heating PEX

0.681" (17.3 mm) 0.875" (22.2 mm)

7/8" (22.2 mm) 1-1/8" (28.6 mm)

Coil Lengths 100 ft. (30.4 m) 300 ft. (91.4 m) 500 ft. (152.4 m) 1000 ft. (304.8 m) 100 ft. (30.4 m) 300 ft. (91.4 m) 500 ft. (152.4 m) 1000 ft. (304.8 m) 100 ft. (30.4 m) 300 ft. (91.4 m)
N

Min. Bend Radius (in) 5" (127.0 mm)

Fluid Capacity (Gal/100') 0.96 (3.6 L)

7" (177.8 mm) 9" (228.6 mm)

1.89 (7.2 L) 3.12 (11.8 L)

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

OT FOR

USA: No. Andover, MA Tel. (855) 699-2887 Fax: (978) 794-1848 radiant.watts.com Canada: Burlington, ONT. Tel. (905) 332-4090 Fax: (905) 332-7068 radiant.watts.com

TA

BLE

ES-Heating-PEX-Tubing 1142

PO

2011 Watts

Vous aimerez peut-être aussi