Académique Documents
Professionnel Documents
Culture Documents
Produkt/Product: Versionsdatum/Release Date: Einteilung/Classification: Firmware-Version: WAG54GS (Annex B) 26 September 2007 Firmware-Versionshistorie/ Firmware Release History 1.01.03 (Annex B)
NOTE: Not for use with Annex A models of the WAG54GS __________________________________________________________________________ 1.01.03 - Adds languange select option on the Basic Setup page - Resolves issue with XSS & CSRF security - Resolves issue with WWW access when static MTU is set - Resolves issue with UPnP failure with Mac OS Lighthouse application - Resolves issue with P2P applications - Resolves issue with E-mail alert characters - Resolves issue with configuration of multiple Access Restriction policies - Resolves issue with open ports 4443, 5190, and 5566 during port scan - Resolves issue with GUI display with Windows 120DPI setting - Resolves issue with AT&T VPN client NOTE: Firmware v1.01.03+ can only be used with Setup Wizard v1.2+ 1.01.01 - Adds Setup Wizard Enable/Disable feature on UI NOTE: Feature must be enabled to successfully run setup wizard to configure the gateway - Fixes device reboot time - Fixes issue with Daylight Savings Time setting for new D.S.T. dates - Fixes issue with local IP address being the same as the WAN IP address - Fixes issue with Security information disclosure for UDP port scan packet 1.01.00 - Adds SES button enable/disable feature to GUI - Adds English, German, French GUI language configuration without firmware upgra de required - Adds multiple language support with Setup Wizard - Fixes issue with Remote Management function when WLAN Management is disabled - Fixes issue with saving page without PPPoE/PPPoA username or password - Fixes SES button color to show white when SES is configured 1.00.12 - Fixes issue with SES function causing configuration loss - Added Incoming and Outgoing log to GUI - Added ADSL Modulation drop-down list - Added prompt for user to change gateway default password when enabling remote management - Fixes time display for daylight savings time - Fixes issue with SNMP display of device name - Fixes issue with duplicate 128-bit WEP Keys when using Generate button - Fixes issue with 64-bit WEP Key generating multiple keys via passphrase - Fixes range require for MTU Size - Fixes issue with PPTP Passthrough for multiple clients - Fixes issue with DHCP response length - Fixes issue with inactive Disconnect/Connect button on Status page
1.00.10 - With Web UI formatting updates 1.00.06 - Initial Release General Notes: - This firmware is only for usage in Europe with Annex B hardware version. - Disconnect all wireless clients from the Gateway during the upgrade process. Make sure no wireless clients attempt to associate with the Gateway until the upgrade process is complete.