Académique Documents
Professionnel Documents
Culture Documents
GE-XXXXX-A
Author(s)
Subsystem/Office
Description of Changes
1. PURPOSE [Short statement of the purpose of the Specification] 2. SCOPE [Short statement of the scope of the Specification.] 3. DEFINITIONS [This paragraph is optional. Unless otherwise defined, the quality management terms that are used in this procedure will be as defined in ISO 8402. When definitions are included, they should be assigned sequential lower-case letters, beginning with a.] 4. REFERENCES [List and identify documents which are either referenced in the body of the specification, or employ the subject as a reference. Also, record forms that are applicable to the implementation of the specification.]
Hard copies of this document are for REFERENCE ONLY and should not be considered the latest revision beyond the date of printing. Form # GF-00004-A
GE-XXXXX-A
[Document Title]
Page 2 of 2
5. REQUIREMENTS [Write text of Specification here. List and identify all technical requirements, including applicable codes and standards necessary to specify completely the required supplies for services.} 6. QUALITY ASSURANCE PROVISIONS [List and identify quality assurance provisions. The following guidelines shall be considered: 1. Identify specific supplier capabilities/QA program requirements 2. Identify inspection and testing provisions such as source inspections, first article inspections, postinstallation testing, receiving inspection, etc. 3. Identify special marking requirements 4. Identify data records and/or forms that must be completed such as as-built drawings, seller reports or certifications, etc.
Hard copies of this document are for REFERENCE ONLY and should not be considered the latest revision beyond the date of printing.
Form # GF-00004-A