Académique Documents
Professionnel Documents
Culture Documents
OBJECTIVES
Understand the manufacture of sulphuric acid. Synthesise the manufacture of ammonia and its salts. Understand alloys. Evaluate the uses of synthetic polymer. Apply the uses of glass and ceramics. Evaluate the uses of composite materials. Appreciate various synthetic industrial materials.
SULPHURIC ACID
(H4SO4)
USES OF SULPHURIC ACID
1. Sulphuric acid is used to produce chemical fertilizer such as ammonium sulphate and potassium sulphate, which are highly soluble in water and can be easily obsorbed by plant. 2. Car batteries contain sulphuric acid which is used as the electrolyte. 3. Sulphuric acid also used in the making of artificial silk-like fibres and rayon. 4. Chemical like paints, dyes and drug use sulphuric acid as one of their component materials.
STAGE2: Production Of Sulphur Trioxide From Sulphur Dioxide i. The purified sulphur dioxide SO2 and excess air are passed over vanadium(V) oxide V2O5 at controlled optimum condition optimum condition to produce sulphur trioxide SO3. 2SO2(g)+O2(g) 2SO3(g) ii. The optimum used are a) Temperature:450-500C b) Pressure: 2-3 atmospheres c) Catalyst: Vanadium(V) oxide iii. Under controlled optimum conditions, 98% conversion is possible. Sulphur dioxide and oxygen that have not reacted are allowed to flow back again over the catalyst in the converter.
STAGE3: Conversion of trioxide to sulphuric acid i. Sulphur trioxide SO2 is dissolved in concentrated sulphuric acid H2SO4 to form oleum H2S2O7 which is then diluted with water to form sulphuric acid H2SO4. SO3(g)+H2SO4(l)H2S2O7(l)
Oleum
H2S2O7(l)+ H2O(l)2H2SO4(aq) ii. The two reactions in stage3 are equivalent to adding sulphur trioxide directly into water. SO3(g)+H2O(l)H2SO4(aq) iii. The addition of sulphur trioxide directly into is not carried out because the reaction is vary vigorous; a lot of heat is given off. As a result, alarge cloud of sulphuric acid fumes is produced, which is corrosive and causes severe air pollution.
The Contact Process Sulph Ur Oxyge n In the converter S(s) + O2(g)SO2(g) Oxyge 2SO(g) + O2(g) 2SO3(g) Temperature: 450-500C Pressure: 2-3 atmospheres Catalyst: Vanadium(V) oxide
SULPHUR
POLLUTION
1. Sulphur dioxide is one of the by-product of contact process. It is a colourless and poisonous gas with a vary pungent smell. 2. Sulphur dioxide which escape into the air causes air pollution. 3. Sulphur dioxide is an acidic which dissolves in water to form sulphurous acidic, H2SO3. In the atmosphere, sulphur dioxide dissolve in water droplets to form sulphurous acidic. SO2(g) + H2O(l) H2SO3(aq) 4. Oxidation of sulphur acid by oxygen produce sulphuric acid, H2SO4, which falls to the earth as acid rain. Sulphur trioxide is also easily oxidised in the air to form sulphur trioxide. Sulphur trioxide dissolve in rainwater to produce sulphuric acid. SO3(g) + H2O(l) H2SO4(aq)
(NH3)
6
USES OF AMMONIA
1. Ammonia that is produce commercially has many uses. 2. It uses: i. In the manufacture of chemical fertilizers such as ammonium sulphate, ammonia nitric, ammonia phosphate and urea. ii. To manufacture nitric acid and explosive. iii. In the making of synthetic fibre and nylon. iv. As a degreasing agent in aqueous form to remove greasy stains in the kitchen.
b) The presence of hydroxide icon causes the aqueous solution to become alkaline. Thus aqueous ammonia solution: i. Turns red litmus paper blue. ii. Reacts with acid to form only salt and waterin neutralization reaction. NH3(aq) + HCI(aq) NH4CI(aq) 2NH3 + H2SO4(aq) (NH4)2SO4(aq) iii. Reacts with solution of metallic cations to produce precipitates. Fe+(aq) + 2OH(aq) Fe (OH)2(s)
(Form ammonia solution) Dirty green precipitate
1. Ammonia is manufacture on a large scale in industry through the haber process. In this process, ammonia is formed form direct combination of nitrogen and hydrogen gas in the volume ratio 1:3. 2. The gas nitrogen obtain form the fractional distillation of liquefied air. The hydrogen gas is obtained form the cracking of petroleum or from the catalysed reaction of natural gas, CH4, with steam. CH4(g) + H2O(g) CO(g) + 3H2(g) 3. The mixture of nitrogen and hydrogen gases is passed over an iron catalyst under controlled optimum condition as below to form ammonia gas. i. Temperature: 450-500C ii. Pressure: 200-500 atmospheres iii. Catalyst used: Iron fillings N2(g) + 3H2(g) 2NH3(g)
4. Under these control optimum condition, only 15% of the gas mixture turn into ammonia gas. The nitrogen and hydrogen that have not reacted are then flow back over the catalyst again in the reactor chamber. 5. The ammonia product is then cooled at a low temperature so that it condenses into a liquid in the cooling chamber.
Nitrogen
Hydrogen
N2 and H2 are mixed in the proportion of 1:3 In the reactor chamber N2(g) + 3H2(g) 2NHIn cooling chamber (g) Temperature: 450-500C Liquid Pressure: 200-500 atmospheres Catalyst used:ammonia process Iron fillings Outline Of Habert
3
AMMONIUM FERTILIZERS
1. 2. 3. 4. Nitrogen is required in large amount by plant to make proteins which are necessary for growth and cell repair. Most plant are not able to get a nitrogen supply directly from the air although it is abundant in the air (78%). Plants can only absorb soluble nitrogen compounds from soil through their roots. The nitrogen compounds are usually soluble nitric salt, ammonia and ammonia salt which are manufacture as chemical fertilizer. Reactions of ammonia with acids produce ammonium fertilizers. NH3(aq) + HNO3(aq) NH4NO3(aq)
Ammonium nitrate
Force
Metalsare ductile
Metals are ductile
Metalsare ductile
Metalsare ductile
Force
Metalsare ductile
The shape of the metal change
10
11
6. An alloy is a mixture of two or more metals (something non-metal) in a specific proportion. For example: a. Bronze (90% of copper and 10% of tin) b. Steel (99% of iron and 1% of carbon) 4. The purposes of making alloys include the following: a)Increase the strength i. Pure iron is soft and vary malleable. When a small amount of carbon is added to iron, an alloy, steal is formed. The more carbon is added, the stronger the steel becomes. ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance iii. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. iv. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance v. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. vi. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
13
a)Increase the strength i. Pure iron is soft and vary malleable. When a small amount of carbon is added to iron, an alloy, steal is formed. The more carbon is added, the stronger the steel becomes. ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xi. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xii. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
15
ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xiii. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xiv. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
25. Pure metal are usually too soft for most uses. They also have a low resistance to corrosion. They rush and tarnish easily. 26. To improve the physical properties of metal, a small amount of another element (usually metal) is added to form another an alloy. 27. An alloy is a mixture of two or more metals (something non-metal) in a specific proportion. For example: a. Bronze (90% of copper and 10% of tin) b. Steel (99% of iron and 1% of carbon) 4. The purposes of making alloys include the following: a)Increase the strength i. Pure iron is soft and vary malleable. When a small amount of carbon is added to iron, an alloy, steal is formed. The more carbon is added, the stronger the steel becomes. ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xvii. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xviii. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xix. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xx. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
xxii. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
19
39. An alloy is a mixture of two or more metals (something non-metal) in a specific proportion. For example: a. Bronze (90% of copper and 10% of tin) b. Steel (99% of iron and 1% of carbon) 4. The purposes of making alloys include the following: a)Increase the strength i. Pure iron is soft and vary malleable. When a small amount of carbon is added to iron, an alloy, steal is formed. The more carbon is added, the stronger the steel becomes. ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xxv. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xxvi. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xxvii. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xxviii. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
21
a)Increase the strength i. Pure iron is soft and vary malleable. When a small amount of carbon is added to iron, an alloy, steal is formed. The more carbon is added, the stronger the steel becomes. ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xxxiii. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xxxiv. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
23
ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xxxv. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xxxvi. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
58. Pure metal are usually too soft for most uses. They also have a low resistance to corrosion. They rush and tarnish easily. 59. To improve the physical properties of metal, a small amount of another element (usually metal) is added to form another an alloy. 60. An alloy is a mixture of two or more metals (something non-metal) in a specific proportion. For example: a. Bronze (90% of copper and 10% of tin) b. Steel (99% of iron and 1% of carbon) 4. The purposes of making alloys include the following: a)Increase the strength i. Pure iron is soft and vary malleable. When a small amount of carbon is added to iron, an alloy, steal is formed. The more carbon is added, the stronger the steel becomes. ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xxxix. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xl. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xli. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xlii. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
xliv. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
27
72. An alloy is a mixture of two or more metals (something non-metal) in a specific proportion. For example: a. Bronze (90% of copper and 10% of tin) b. Steel (99% of iron and 1% of carbon) 4. The purposes of making alloys include the following: a)Increase the strength i. Pure iron is soft and vary malleable. When a small amount of carbon is added to iron, an alloy, steal is formed. The more carbon is added, the stronger the steel becomes. ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xlvii. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. xlviii. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance xlix. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. l. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
29
a)Increase the strength i. Pure iron is soft and vary malleable. When a small amount of carbon is added to iron, an alloy, steal is formed. The more carbon is added, the stronger the steel becomes. ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance lv. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. lvi. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
31
ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance lvii. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. lviii. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
91. Pure metal are usually too soft for most uses. They also have a low resistance to corrosion. They rush and tarnish easily. 92. To improve the physical properties of metal, a small amount of another element (usually metal) is added to form another an alloy. 93. An alloy is a mixture of two or more metals (something non-metal) in a specific proportion. For example: a. Bronze (90% of copper and 10% of tin) b. Steel (99% of iron and 1% of carbon) 4. The purposes of making alloys include the following: a)Increase the strength i. Pure iron is soft and vary malleable. When a small amount of carbon is added to iron, an alloy, steal is formed. The more carbon is added, the stronger the steel becomes. ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance lxi. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. lxii. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
ii. Pure aluminium is light but not strong. With a small amount of copper and magnesium are added to aluminium, a strong, light and durable alloy call duralumin is produced. b)Improving the resistance to corrosion i. Iron rust easily but stainless steel which contains 80.6% of iron, 0.4% of carbon, 18% of chromium and 1% of nickel does not rush. These properties make stainless steel suitable for making surgical instrument and cutlery. ii. Pure copper tarnish easily. When zinc (30%) is added, the yellow alloy which is known as brass develops a high resistance to corrosion. c) Enhancing the appearance lxiii. Pewter, an alloy of tin (97%), antimony and copper is not only hard but also has a more beautiful white silvery appearance. lxiv. When copper is mixed with nickel to form cupronickel, an alloy that has an attractive silvery, bright appearance is formed which is suitable for making coins.
34
Uses Making of cutting tools, hammers and chisels Stainless steel 80.6% iron Making of 0.4% carbon surgical 18%chromium instrument, 1% nickel knives forks and spoons Brass 70% copper Hard, do not rust, Making of 30% zinc bright appearance ornaments, electrical wiring and plug. Bronze 90% copper Hard, do not For casting bells, 10% tin corrode easily and medals, swords durable and statues Pewter 90% tin Ductile and Making of 2.5% copper malleable, white ornaments, 0.5% antimony silvery appearance souvenirs and mugs Duralumin 95% aluminium Light, strong and Making part of 4% copper durable aircrafts and 1%magnesium racing cars Cupronickel 75%copper Attractive, silvery Making of silver 25%nickel appearance, hard coins and tough Composition, properties and uses of alloys
Properties Strong,hard and high wear resistance Do not rust and tarnish, strong and durable
35
36
soluble in organic (foamed) solvents Polyacrylonitrile (CH2(PAN, Orlon, CHCN)n Acrilan) Polytetrafluoroet (CF2hylene CF2)n (PTFE, Teflon) Poly(methyl methacrylate) (PMMA, Lucite, Plexiglas) Poly(vinyl acetate) (PVAc) [CH2C(CH3)CO2 CH3]n acrylonitrile CH2=CHCN high-melting solid rugs, blankets soluble in organic clothing solvents
non-stick tetrafluoroeth resistant, smooth surfaces ylene solid electrical CF2=CF2 insulation methyl lighting covers, methacrylate hard, transparent signs CH2=C(CH3)C solid skylights O2CH3 latex paints, adhesives requires vulcanization for practical use synthetic rubber oil resistant
(CH2vinyl acetate CHOCOCH3 CH2=CHOCO soft, sticky solid )n CH3 soft, sticky solid tough, rubbery solid
[CH2isoprene cis-Polyisoprene CH=C(CH3)- CH2=CHnatural rubber CH2]n C(CH3)=CH2 Polychloroprene [CH2(cis + trans) CH=CCl(Neoprene) CH2]n chloroprene CH2=CHCCl=CH2
37
38
Soda-lime glass
Borosilicate glass
Cooking utensils Laboratory glassware such as conical flaks and boiling tube Lenses and prisms Decorative glassware and art object Imation jewellery 39
CERAMICS
1. Traditional silicate ceramics are made by heating aluminosilicate clay such as kaolin to a vary high temperature. 2. Ceramics have many special properties that make them one of the most useful materials in our everyday life. That: a.Are hard, strong but brittle b.Have high melting point and remain stable at high temperature c.Are heat and electric instrument d.Are resistant to corrosion and wear e.Are chemically not reactive f. Do not readily deform under stress 3. Ceramic play important role in our daily life. They are uses as a.Construction materials i. Ceramic are strong and hard, uses to make roof tiles, bricks cement, sinks, and toilet bowls. ii. They are also used to make refractory bricks because high resistant to heat. b.Decorative items i. To make pottery, china plates, and porcelain vases since they do not tarnish easily and are durable. ii. They are used to make bathroom fixture such as floor and wall tiles. c.Electrical insulator i. Ceramic are used to make electrical insulator in electrical items such as toasters, fridges and electrical plug. Materials Oxide ceramic Alumina,AL2O3 Beryllia, BeO Zirconia, ZiO Non-oxide ceramics Boron carbide,B4C3 Silicon nitride, Si3, n4 Metals Aluminium Melting point/ C 2054 2574 2710 Density/G cm-3 3.97 3.01 5.68 Elastic modulus/ GPa 380 370 210 Hardness/ mohs 9 8 8
9 9 9 3
40
Steel
1515
7.86
205
REINFORCES CONCRETE
1. Concrete is hard, fireproof, waterproof, comparatively cheap and easy to maintain. It is more important construction materials. 2. The reinforces is a combination of concrete and steel.
SUPERCONDUCTOR
1. Metal such as copper and aluminium are good conductor of electricity, but 20% of the electric energy is lost in the form of heat during transmission. 2. Super conductor are materials that have no resistance to the flow of electricity at a particular temperature. Hence, 100% electricity transmission is possible. 3. One of the most dramatic properties of a superconductor is its ability to levitate a magnet. Superconductor are used to build magnetically levitate high-speed train (at about 552 km/h). 4. Superconductor are used to make chips for smaller and faster supercomputer. Superconductor also play an important role in high speed data processing in internet communication.
41
FIBRE OPTIC
1. Fibre optic is a composite material that in used to transmit signals for light wave. 2. Fibre optic is used in a. Telecommunicate where the telephone substation are liked by fibre optic cables. b. Domestic cable television network c. Closed circuit television security system. 3. Fibre optic also used in medical fields. It is used in a number of instrument which enable the investigation for internal body part without having to perform surgery.
FIBRE GLASS
1. Fibre glass is glass in the form of fine threads. Molten gas is dropped onto a refractory rating disc when the glass flies off the disc glass to form fibre. 2. Fibre glass is strong than steel, do not burnt, stretch or rot, resistant to fire and water but is brittle. 3. When fibre glass added to a plastic, a new composite material fibre glass reinforces plastic is formed. 4. Fibre glass reinforces plastic has more superior properties than glass and plastic. It is a. Extremely strong b. Light weigh c. Resistant to fire and water d. Can be molded, shaped and twisted
PHOTOCHROMIC GLASS
1. When 0.01 to 0.1% of silver chloride (a type of photochromic substances) and a small amount of copper (II) chloride are added to molten silicon dioxide, photochromic glass is formed. 2. The photochromic glass has a special properties. It darken when exposed to strong sunlight or ultraviolet. 3. Photochromic glass is suitable for making sunglasses.
42
43