Académique Documents
Professionnel Documents
Culture Documents
• Starting at the front edge of the upper burn plate, install the new gasket by removing
the adhesive liner from the new gasket (a little at a time) as you apply the gasket to
the bottom perimeter edge. The seam of the gasket should be as it was on the old
gasket.
• The bulb of the gasket should fit closely to the outer edge of the plate.
• Punch mounting holes in the gasket with the awl over the existing thirteen rivet
locations.
• Assemble the steel gasket retainer to the bottom of the upper burn plate with rivets
included in the kit using the rivet gun.
• Install the upper burn plate in the stove.
• Install the fuel deflector.
• Close the firebox door.
• Plug the stove in.
• Check for proper operation.