Académique Documents
Professionnel Documents
Culture Documents
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
Fortran/Fortran examples
Part of the Fortran WikiBook The following Fortran code examples or sample programs show different situations depending on the compiler. The first set of examples are for the Fortran II, IV, and 77 compilers. The remaining examples can be compiled and run with any newer standard Fortran compiler (see the end of the main Fortran article for lists of compilers). Most modern Fortran compilers expect a file with a .f or .for extension (for FORTRAN 66 or FORTRAN 77 source, although the FORTRAN 66 dialect may have to be selected specifically with a command-line option) or .f90/.f95 extension (for Fortran 90/95 source, respectively).
1 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
AREA = SQRT( S * (S - A) * (S - B) * (S - C)) WRITE(6,601) A,B,C,AREA 601 FORMAT(4H A= ,I5,5H B= ,I5,5H C= ,I5,8H AREA= ,F10.2,12HSQUARE UNITS STOP END
Simple Fortran IV program Multiple data card input This program has two input checks: one for a blank card to indicate end-of-data, and the other for a zero value within the input data. Either condition causes a message to be printed. C C C C AREA OF A TRIANGLE - HERON'S FORMULA INPUT - CARD READER UNIT 5, INTEGER INPUT, ONE BLANK CARD FOR END-OF-DATA OUTPUT - LINE PRINTER UNIT 6, REAL OUTPUT INPUT ERROR DISPAY ERROR MESSAGE ON OUTPUT 501 FORMAT(3I5) 601 FORMAT(4H A= ,I5,5H B= ,I5,5H C= ,I5,8H AREA= ,F10.2,12HSQUARE UNITS 602 FORMAT(10HNORMAL END) 603 FORMAT(23HINPUT ERROR, ZERO VALUE) INTEGER A,B,C 10 READ(5,501) A,B,C IF(A.EQ.0 .AND. B.EQ.0 .AND. C.EQ.0) GO TO 50 IF(A.EQ.0 .OR. B.EQ.0 .OR. C.EQ.0) GO TO 90 S = (A + B + C) / 2.0 AREA = SQRT( S * (S - A) * (S - B) * (S - C)) WRITE(6,601) A,B,C,AREA GO TO 10 50 WRITE(6,602) STOP 90 WRITE(6,603) STOP END
Simple Fortran 77 program Multiple data card input This program has two input checks in the READ statement with the END and ERR parameters, one for a blank card to indicate end-of-data; and the other for zero value along with valid data. In either condition, a message will be printed. C AREA OF A TRIANGLE - HERON'S FORMULA C INPUT - CARD READER UNIT 5, INTEGER INPUT, NO BLANK CARD FOR END OF DATA C OUTPUT - LINE PRINTER UNIT 6, REAL OUTPUT
2 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
C INPUT ERROR DISPAYS ERROR MESSAGE ON OUTPUT 501 FORMAT(3I5) 601 FORMAT(" A= ",I5," B= ",I5," C= ",I5," AREA= ",F10.2,"SQUARE UNITS" 602 FORMAT("NORMAL END") 603 FORMAT("INPUT ERROR OR ZERO VALUE ERROR") INTEGER A,B,C 10 READ(5,501,END=50,ERR=90) A,B,C IF(A=0 .OR. B=0 .OR. C=0) GO TO 90 S = (A + B + C) / 2.0 AREA = SQRT( S * (S - A) * (S - B) * (S - C)) WRITE(6,601) A,B,C,AREA GO TO 10 50 WRITE(6,602) STOP 90 WRITE(6,603) STOP END
"Retro" FORTRAN IV
A retro example of a FORTRAN IV (later evolved into FORTRAN 66) program deck is available on the IBM 1130 page, including the IBM 1130 DM2 JCL required for compilation and execution. An IBM 1130 emulator is available at IBM 1130.org (http://ibm1130.org/) that will allow the FORTRAN IV program to be compiled and run on a PC.
C C
FORTRAN IV WAS ONE OF THE FIRST PROGRAMMING LANGUAGES TO SUPPORT SOURCE COMMENTS WRITE (6,7) 7 FORMAT(13H HELLO, WORLD) STOP END
This program prints "HELLO, WORLD" to Fortran unit number 6, which on most machines was the line printer or terminal. (The card reader or keyboard was usually connected as unit 5). The number 7 in the WRITE statement refers to the statement number of the corresponding FORMAT statement. FORMAT statements may be placed anywhere in the same program or function/subroutine block as the WRITE statements which reference them. Typically a FORMAT statement is placed immediately following the WRITE statement which invokes it; alternatively, FORMAT statements are grouped together at the end of the program or subprogram block. If execution flows into a FORMAT statement, it is a no-op; thus, the example above has only two executable
3 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
statements, WRITE and STOP. The initial 13H in the FORMAT statement in the above example defines a Hollerith constant, here meaning that the 13 characters immediately following are to be taken as a character constant (note that the Hollerith constant is not surrounded by delimiters). (Some compilers also supported character literals enclosed in single quotes, a practice that came to be standard with FORTRAN 77.) The space immediately following the 13H is a carriage control character, telling the I/O system to advance to a new line on the output. A zero in this position advances two lines (double space), a 1 advances to the top of a new page and + character will not advance to a new line, allowing overprinting. FORTRAN 77 As of FORTRAN 77, single quotes are used to delimit character literals, and inline character strings may be used instead of references to FORMAT statements. Comment lines may be indicated with either a C or an asterisk (*) in column 1. PROGRAM HELLOW The PRINT statement is like WRITE, but prints to the standard output unit PRINT '(A)', 'Hello, world' STOP END
* *
Fortran 90 As of Fortran 90, double quotes are allowed in addition to single quotes. An updated version of the Hello, world example (which here makes use of list-directed I/O, supported as of FORTRAN 77) could be written in Fortran 90 as follows: program HelloWorld write (*,*) 'Hello, world!' end program HelloWorld
Fortran 77 examples
Greatest common divisor
The following introductory example in FORTRAN 77 finds the greatest common divisor for two numbers A and B using a verbatim implementation of Euclid's algorithm. * * euclid.f (FORTRAN 77) Find greatest common divisor using the Euclidean algorithm
4 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
PROGRAM EUCLID PRINT *, 'A?' READ *, NA IF (NA.LE.0) THEN PRINT *, 'A must be a positive integer.' STOP END IF PRINT *, 'B?' READ *, NB IF (NB.LE.0) THEN PRINT *, 'B must be a positive integer.' STOP END IF PRINT *, 'The GCD of', NA, ' and', NB, ' is', NGCD(NA, NB), '.' STOP END FUNCTION NGCD(NA, NB) IA = NA IB = NB 1 IF (IB.NE.0) THEN ITEMP = IA IA = IB IB = MOD(ITEMP, IB) GOTO 1 END IF NGCD = IA RETURN END The above example is intended to illustrate the following: The PRINT and READ statements in the above use '*' as a format, specifying list-directed formatting. List-directed formatting instructs the compiler to make an educated guess about the required input or output format based on the following arguments. As the earliest machines running Fortran had restricted character sets, FORTRAN 77 uses abbreviations such as .EQ., .NE., .LT., .GT., .LE., and .GE. to represent the relational operators =, , <, >, , and , respectively. This example relies on the implicit typing mechanism to specify the INTEGER types of NA, NB, IA, IB, and ITEMP. In the function NGCD(NA, NB), the values of the function arguments NA and NB are copied into the local variables IA and IB respectively. This is necessary as the values of IA and IB are altered within the function. Because argument passing in Fortran functions and subroutines utilize call by reference by default (rather than call by value, as is the default in languages such as C), modifying NA and NB from within the function would effectively have modified the corresponding actual arguments in the main PROGRAM unit which called the function. The following shows the results of compiling and running the program.
5 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
Complex numbers
The following FORTRAN 77 example prints out the values of eji / 4 (where . * * * * * cmplxd.f (FORTRAN 77) Demonstration of COMPLEX numbers Prints the values of e ** (j * i * pi / 4) for i = 0, 1, 2, ..., 7 where j is the imaginary number sqrt(-1) PROGRAM CMPLXD IMPLICIT COMPLEX(X) PARAMETER (PI = 3.141592653589793, XJ = (0, 1)) DO 1, I = 0, 7 X = EXP(XJ * I * PI / 4) IF (AIMAG(X).LT.0) THEN PRINT 2, 'e**(j*', I, '*pi/4) = ', REAL(X), ' - j',-AIMAG(X) ELSE PRINT 2, 'e**(j*', I, '*pi/4) = ', REAL(X), ' + j', AIMAG(X) END IF 2 FORMAT (A, I1, A, F10.7, A, F9.7) 1 CONTINUE STOP END The above example is intended to illustrate the following: The IMPLICIT statement can be used to specify the implicit type of variables based on their initial letter if different from the default implicit typing scheme described above. In this example, this statement specifies that the implicit type of variables beginning with the letter X shall be COMPLEX. The PARAMETER statement may be used to specify constants. The second constant in this example (XJ) is given the complex-valued value 0 + j1, where j is the imaginary unit . The first number in the DO statement specifies the number of the last statement considered to be within the body of the DO loop. In this example, as neither the END IF nor the FORMAT is a single executable statement, the CONTINUE statement (which does nothing) is used simply in order for there to be some statement to denote as the final statement of the loop. ) for values of
6 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
corresponds to the exponential function ex. In FORTRAN 77, this is a generic function, meaning that it accepts arguments of multiple types (such as REAL and, in this example, COMPLEX). In FORTRAN 66, a specific function would have to be called by name depending on the type of the function arguments (for this example, CEXP() for a COMPLEX-valued argument). When applied to a COMPLEX-valued argument, REAL() and AIMAG() return the values of the argument's real and imaginary components, respectively.
EXP()
Incidentally, the output of the above program is as follows (see the article on Euler's formula for the geometric interpretation of these values as eight points spaced evenly about a unit circle in the complex plane). $ cmplxd e**(j*0*pi/4) e**(j*1*pi/4) e**(j*2*pi/4) e**(j*3*pi/4) e**(j*4*pi/4) e**(j*5*pi/4) e**(j*6*pi/4) e**(j*7*pi/4)
= 1.0000000 + j0.0000000 = 0.7071068 + j0.7071068 = 0.0000000 + j1.0000000 = -0.7071068 + j0.7071068 = -1.0000000 - j0.0000001 = -0.7071066 - j0.7071069 = 0.0000000 - j1.0000000 = 0.7071070 - j0.7071065
Error can be seen occurring in the last decimal place in some of the numbers above, a result of the COMPLEX data type representing its real and imaginary components in single precision. Incidentally, Fortran 90 also made standard a double-precision complex-number data type (although several compilers provided such a type even earlier).
7 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
print*, "This program performs summations. Enter 0 to stop." open(unit=10, file="SumData.DAT") sum = 0 do print*, "Add:" read*, a if (a == 0) then exit else sum = sum + a end if write(10,*) a end do print*, "Summation =", sum write(10,*) "Summation =", sum close(10) end When executed, the console would display the following: This program performs summations. Add: 1 Add: 2 Add: 3 Add: 0 Summation = 6 And the file SumData.DAT would contain: 1 2 3 Summation = 6 Enter 0 to stop.
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
other features introduced by Fortran 90. program cylinder ! ! ! ! ! Calculate the surface area of a cylinder. Declare variables and constants. constants=pi variables=radius squared and height implicit none ! Require all variables to be explicitly declared
integer :: ierr character(1) :: yn real :: radius, height, area real, parameter :: pi = 3.141592653589793 interactive_loop: do ! ! Prompt the user for radius and height and read them. write (*,*) 'Enter radius and height.' read (*,*,iostat=ierr) radius,height ! ! If radius and height could not be read from input, then cycle through the loop. if (ierr /= 0) then write(*,*) 'Error, invalid input.' cycle interactive_loop end if ! Compute area. The ** means "raise to a power."
area = 2 * pi * (radius**2 + radius*height) ! ! Write the input variables (radius, height) and output (area) to the screen. write (*,'(1x,a7,f6.2,5x,a7,f6.2,5x,a5,f6.2)') & 'radius=',radius,'height=',height,'area=',area yn = ' ' yn_loop: do write(*,*) 'Perform another calculation? y[n]' read(*,'(a1)') yn if (yn=='y' .or. yn=='Y') exit yn_loop if (yn=='n' .or. yn=='N' .or. yn==' ') exit interactive_loop
9 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
10 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
Writing functions
Modern Fortran features available for use with procedures, including deferred-shape, protected, and optional arguments, are illustrated in the following example, a function to solve a system of linear equations. function gauss_sparse(num_iter, tol, b, A, x, actual_iter) result(tol_max !
This function solves a system of equations (Ax = b) by using the Gauss-Seide implicit none real :: tol_max
Input: its value cannot be modified from within the function integer, intent(in) :: num_iter real, intent(in) :: tol real, intent(in), dimension(:) :: b, A(:,:)
Input/Output: its input value is used within the function, and can be modifi real, intent(inout) :: x(:)
Output: its value is modified from within the function, only if the argument integer, optional, intent(out) :: actual_iter Locals integer :: i, n, iter real :: xk Initialize values n = size(b) ! Size of array, obtained using size intrinsic function tol_max = 2. * tol iter = 0 Compute solution until convergence convergence_loop: do while (tol_max >= tol .and. iter < num_iter); iter tol_max = -1. ! Reset the tolerance value
Compute solution for the k-th iteration iteration_loop: do i = 1, n Compute the current x-value xk = (b(i) - dot_product(A(i,:i-1),x(:i-1)) - dot_product(A(i,i Compute the error of the solution
11 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
dot_product(a,v)=a'b tol_max = max((abs(x(i) - xk)/(1. + abs(xk))) ** 2, abs(A(i, i) x(i) = xk enddo iteration_loop enddo convergence_loop if (present(actual_iter)) actual_iter = iter
Note that an explicit interface to this routine must be available to its caller so that the type signature is known. This is preferably done by placing the function in a MODULE and then USEing the module in the calling routine. An alternative is to use an INTERFACE block, as shown by the following example: program test_gauss_sparse implicit none ! explicit interface to the gauss_sparse function interface function gauss_sparse(num_iter, tol, b, A, x, actual_iter) result real :: tol_max integer, intent(in) :: num_iter real, intent(in) :: tol real, intent(in), dimension(:) :: b, A(:,:) real, intent(inout) :: x(:) integer, optional, intent(out) :: actual_iter end function end interface declare variables integer :: i, N = 3, actual_iter real :: residue real, allocatable :: A(:,:), x(:), b(:) allocate arrays allocate (A(N, N), b(N), x(N)) Initialize matrix A = reshape([(real(i), i = 1, size(A))], shape(A)) Make matrix diagonally dominant do i = 1, size(A, 1) A(i,i) = sum(A(i,:)) + 1 enddo Initialize b b = [(i, i = 1, size(b))]
12 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
Initial (guess) solution x = b invoke the gauss_sparse function residue = gauss_sparse(num_iter = 100, & tol = 1E-5, & b = b, & A = a, & x = x, & actual_iter = actual_iter) Output print '(/ "A = ")' do i = 1, size(A, 1) print '(100f6.1)', A(i,:) enddo print '(/ "b = " / (f6.1))', b print '(/ "residue = ", g10.3 / "iterations = ", i0 / "solution = "/ (11x, residue, actual_iter, x
Writing subroutines
In those cases where it is desired to return values via a procedure's arguments, a subroutine is preferred over a function; this is illustrated by the following subroutine to swap the contents of two arrays:
13 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
subroutine swap_real(a1, a2) implicit none ! Input/Output real, intent(inout) :: a1(:), a2(:) Locals integer :: i real :: a Swap do i = 1, min(size(a1), size(a2)) a = a1(i) a1(i) = a2(i) a2(i) = a enddo
end subroutine swap_real As in the previous example, an explicit interface to this routine must be available to its caller so that the type signature is known. As before, this is preferably done by placing the function in a MODULE and then USEing the module in the calling routine. An alternative is to use a INTERFACE block.
14 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
In the example, the swap_e subroutine is elemental, i.e., it acts upon its array arguments, on an elementby-element basis. Elemental procedures must be pure (i.e., they must have no side effects and can invoke only pure procedures), and all the arguments must be scalar. Since swap_e is internal to the swap_real subroutine, no other program unit can invoke it. The following program serves as a test for any of the two swap_real subroutines presented: program test_swap_real implicit none ! explicit interface to the swap_real subroutine interface subroutine swap_real(a1, a2) real, intent(inout) :: a1(:), a2(:) end subroutine swap_real end interface Declare variables integer :: i real :: a(10), b(10) Initialize a, b a = [(real(i), i = 1, 20, 2)] b = a + 1 Output before swap print '(/"before swap:")' print '("a = [", 10f6.1, "]")', a print '("b = [", 10f6.1, "]")', b Call the swap_real subroutine call swap_real(a, b) Output after swap print '(// "after swap:")' print '("a = [", 10f6.1, "]")', a print '("b = [", 10f6.1, "]")', b
15 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
In Fortran, the concept of pointers differs from that in C-like languages. A Fortran 90 pointer does not merely store the memory address of a target variable; it also contains additional descriptive information such as the target's rank, the upper and lower bounds of each dimension, and even strides through memory. This allows a Fortran 90 pointer to point at submatrices. Fortran 90 pointers are "associated" with well-defined "target" variables, via either the pointer assignment operator (=>) or an ALLOCATE statement. When appearing in expressions, pointers are always dereferenced; no "pointer arithmetic" is possible. The following example illustrates the concept: module SomeModule implicit none contains elemental function A(x) result(res) integer :: res integer, intent(IN) :: x res = x + 1 end function end module SomeModule program Test use SomeModule, DoSomething => A implicit none !Declare variables integer, parameter :: m = 3, n = 3 integer, pointer :: p(:)=>null(), q(:,:)=>null() integer, allocatable, target :: A(:,:) integer :: istat = 0, i, j character(80) :: fmt ! !
Write format string for matrices (/ A / A, " = [", 3( "[",3(i2, 1x), "]" / 5x), "]" ) write (fmt, '("(/ A / A, "" = ["", ", i0, "( ""["",", i0, "(i2, 1x), ""]"" / allocate(A(m, n), q(m, n), stat = istat) if (istat /= 0) stop 'Error during allocation of A and q'
! ! ! ! !
Matrix A is: A = [[ 1 4 7 ] [ 2 5 8 ] [ 3 6 9 ] ] A = reshape([(i, i = 1, size(A))], shape(A)) q = A write(*, fmt) "Matrix A is:", "A", ((A(i, j), j = 1, size(A, 2)), i =
16 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
p will be associated with the first column of A p => A(:, 1) This operation on p has a direct effect on matrix A p = p ** 2 This will end the association between p and the first column of A nullify(p) Matrix A becomes: A = [[ 1 4 7 ] [ 4 5 8 ] [ 9 6 9 ] ] write(*, fmt) "Matrix A becomes:", "A", ((A(i, j), j = 1, size(A, 2)) Perform some array operation q = q + A Matrix q q = [[ 2 [ 6 [12 ] write(*, becomes: 8 14 ] 10 16 ] 12 18 ] fmt) "Matrix q becomes:", "q", ((q(i, j), j = 1, size(A, 2))
! ! ! ! !
! ! ! ! !
Use p as an ordinary array allocate (p(1:m*n), stat = istat) if (istat /= 0) stop 'Error during allocation of p' Perform some array operation p = reshape(DoSomething(A + A ** 2), shape(p)) Array operation: p(1) = 3 p(2) = 21 p(3) = 91 p(4) = 21 p(5) = 31 p(6) = 43 p(7) = 57 p(8) = 73 p(9) = 91 write(*, '("Array operation:" / (4x,"p(",i0,") = ",i0))') (i, p(i), i deallocate(A, p, q, stat = istat) if (istat /= 0) stop 'Error during deallocation'
! ! ! ! ! ! ! ! ! !
17 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
Module programming
A module is a program unit which contains data definitions, global data, and CONTAINed procedures. Unlike a simple INCLUDE file, a module is an independent program unit that can be compiled separately and linked in its binary form. Once compiled, a module's public contents can be made visible to a calling routine via the USE statement. The module mechanism makes the explicit interface of procedures easily available to calling routines. In fact, modern Fortran encourages every SUBROUTINE and FUNCTION to be CONTAINed in a MODULE. This allows the programmer to use the newer argument passing options and allows the compiler to perform full type checking on the interface. The following example also illustrates derived types, overloading of operators and generic procedures. module GlobalModule ! ! Reference to a pair of procedures included in a previously compiled module named PortabilityLibrary use PortabilityLibrary, only: GetLastError, & ! Generic procedure Date ! Specific procedure Constants integer, parameter :: dp_k = kind (1.0d0) ! Double precision kind real, parameter :: zero = (0.) real(dp_k), parameter :: pi = 3.141592653589793_dp_k Variables integer :: n, m, retint logical :: status, retlog character(50) :: AppName Arrays real, allocatable, dimension(:,:,:) :: a, b, c, d complex(dp_k), allocatable, dimension(:) :: z Derived type definitions type ijk integer :: i integer :: j integer :: k end type ijk type matrix integer m, n real, allocatable :: a(:,:) end type matrix ! !
All the variables and procedures from this module can be accessed by other program units, except for AppName public
18 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
private :: AppName ! Generic procedure swap interface swap module procedure swap_integer, swap_real end interface swap interface GetLastError ! This adds a new, additional procedure to the ! generic procedure GetLastError module procedure GetLastError_GlobalModule end interface GetLastError ! Operator overloading interface operator(+) module procedure add_ijk end interface Prototype for external procedure interface function gauss_sparse(num_iter, tol, b, A, x, actual_iter) result( real :: tol_max integer, intent(in) :: num_iter real, intent(in) :: tol real, intent(in), dimension(:) :: b, A(:,:) real, intent(inout) :: x(:) integer, optional, intent(out) :: actual_iter end function gauss_sparse end interface Procedures included in the module contains Internal function function add_ijk(ijk_1, ijk_2) type(ijk) add_ijk, ijk_1, ijk_2 intent(in) :: ijk_1, ijk_2 add_ijk = ijk(ijk_1%i + ijk_2%i, ijk_1%j + ijk_2%j, ijk_1%k + ijk_2 end function add_ijk external files 'swap_integer.f90' ! Comments SHOULDN'T be added on include lines 'swap_real.f90' GlobalModule
Retrieved from "http://en.wikibooks.org/w/index.php?title=Fortran/Fortran_examples&oldid=2065810" This page was last modified on 6 March 2011, at 03:15. Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. See Terms of Use for details.
19 of 20
10/28/2011 4:38 PM
http://en.wikibooks.org/wiki/Fortran/Fortran_examples
20 of 20
10/28/2011 4:38 PM